PY314400296NETGEAR N600 WiFi USB Adapter

Notification of Compliance Regulatory Compliance Information This document includes user requirements for operating NETGEAR products in accordance with national laws including usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable national regulatory authority. The NETGEAR product firmware limits operation to only the channels allowed in a particular region or country. Therefore, all options described in this document may not be available in your version of the product. This document applies to both Class A and Class B devices:  Class A devices are intended to be used in a commercial or industrial environment. They are not intended to be used in a residential home or be available for general public use.  Class B devices are intended to be used in a residential setting, and may also be used in commercial and industrial applications. Examples of Class B devices are telephones, personal computers, and residential data gateways.  Fuses should only be installed by service personnel.  NETGEAR recommends the use of 26 AWG or larger gauge phone line cords. Europe – EU Declaration of Conformity This section applies to products bearing the CE or CE! mark: Products bearing the CE or CE! mark comply with the following EU directives:  EMC Directive 2004/108/EC  Low Voltage Directive 2006/95/EC  Ecodesign Directive 2009/125/EC  RoHS Directive 2011/65/EU If the product has telecommunications functionality, it also complies with the requirement of the following EU directive:  R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity. The EU CE Declaration of Conformity may be found at http://support.netgear.com/app/answers/detail/a_id/11621/. Caution for installing this equipment outdoors: (Valid in all EU member states, EFTA states, and Switzerland.) Be aware that outdoor installations require special attention and will only be handled by trained and qualified installation personnel. No one from the general public is permitted to install NETGEAR wireless products outdoors when external antennas, power and grounding must be installed for use. Particular attention has to be given allowed operational frequencies. Contact NETGEAR for instructions on how to contact an installer for outdoor operations if this product requires the special considerations for outdoor installations. For detailed iformation concerning installations in France, the user should contact the national spectrum authority in France (http://www.arcep.fr/ ) The following paragraphs apply to WN2500RP: This device is a 2.4GHz and 5GHz wideband transmission system (transceiver), intended for indoor use only in all EU member states, EFTA states, and Switzerland. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for applying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10mW EIRP in the frequency range of 2454-2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. Warning NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference in which case the user may be required to take adequate measures. FCC Requirements for Operation in the United States Information in this section applies to products bearing the FCC mark (or statement): FCC Information to User This NETGEAR product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. The following statement applies to these products:  C6300  JWNR2000v5  WN2500RP  WNR618  D6200V2  JWNR2010v5  WN3000RPv2  EX2700  R6050  WN3500RP  EX6100  R7500  WNDR3400v3  EX6200  R8000  WN1000v4  HMNC100  STS7000  WNR2010  JNR1010v2  VEGN2200  WNR2020  JR6150  WN370  WNR614 FCC Guidelines for Human Exposure The NETGEAR product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. The following statement applies to this product:  C6300XB3C6300BD This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 25cm 35cm between the radiator and your body. The following statement applies to this product:  R8000 This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 30cm between the radiator and your body. FCC Declaration of Conformity We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that this product complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is subject to the following two conditions:  The device may not cause harmful interference, and  The device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference Warnings & Instructions The NETGEAR product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, m…

Text truncated - open the document above for the full version.

Quick Start N600 WiFi USB Adapter Model WNDA3100v3 If the Resource CD screen does not display, browse the files on the CD and double-click the Autorun.exe file. The NETGEAR Resource CD screen displays. 2. Click the Setup button. The Software Update Check screen displays. 3. Install the setup software using one of the following methods. • Connected to the Internet. If you are connected to the Internet, click the Check for Updates button. After the software checks for updates, the Update Check Complete screen displays. Click the Continue button. The Welcome screen displays. • Not connected to the Internet. If you are not connected to the Internet, click the Install from CD button. The Welcome screen displays. 4. To accept the license agreement, select the I agree radio button and click the Next button. A message displays asking you to wait while software is installed. After a few minutes, NETGEAR genie prompts you to insert your adapter. 5. Insert the adapter into a USB port on your computer with or without the USB cable and plastic cradle. Note: The USB cable and plastic cradle can extend the range of your adapter and improve WiFi reception. To use the adapter with the USB cable and plastic cradle: a. Place a fastener on the back of the plastic cradle and place another fastener on your computer. Make sure that the surfaces on which you are placing the fasteners are clean and dry. b. Insert the adapter into the plastic cradle. c. Connect the USB cable to the adapter. Note: NETGEAR recommends using the USB cable that is supplied in the package. Do not use another USB cable to connect the adapter to the USB port on your computer. Using another USB cable might affect the performance and correct functioning of the adapter. d. Connect the USB cable to a USB port on your computer. e. Join the fasteners together. Package Contents Set Up NETGEAR genie You can set up NETGEAR genie and use it to join a WiFi network. If you do not want to use NETGEAR genie, you can install a Windows standalone driver and use the Windows WLAN Autoconfig service or the Wireless Zero Configuration service to join a WiFi network. For more information, see Install Windows Standalone Driver. 1. Insert the resource CD in your computer CD drive. Note: If your computer does not include a CD drive, download the WNDA3100v3 resource CD driver by visiting http://support.netgear.com. Click the Support For Home button and enter WNDA3100v3 in the search field. Adapter Plastic cradleUSB cableFasteners Resource CD October 2014 NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. 6. Return to the NETGEAR genie screen and click the Next button. NETGEAR genie displays a list of WiFi networks in your area. Install Windows Standalone Driver For Windows 8.1, Windows 8, Windows 7, and Windows Vista, you can install the Windows standalone driver without NETGEAR genie and use the Windows WLAN Autoconfig service to join a WiFi network. If you use Windows XP, you can install the Windows standalone driver and use the Wireless Zero Configuration service to join a WiFi network. 1. Insert the resource CD in your computer CD drive. Note: If your computer does not include a CD drive, download the WNDA3100v3 resource CD driver by visiting http://support.netgear.com. Click the Support For Home button and enter WNDA3100v3 in the search field. If the Resource CD screen does not display, browse the files on the CD and double-click the Autorun.exe file. The NETGEAR Resource CD screen displays. 2. Click the Install Windows Standalone Driver button. The driver installs on your computer. 3. When prompted, insert the adapter into a USB port on your computer. Join a WiFi Network You can join a WiFi network from NETGEAR genie, or you can use Wi-Fi Protected Setup (WPS) if your WiFi router supports it. Join a Network Using NETGEAR genie 1. Insert the adapter into a USB port on your computer. 2. Click the adapter’s NETGEAR genie icon that displays on the Windows systems tray or on the desktop. The NETGEAR genie Home screen displays. 3. Click the Join a Network button. 4. Select a WiFi network. 5. Click the Connect button. 6. If the network is secure, enter its password or network key. The adapter joins the network, which can take a few minutes. Your settings are saved in a profile. The adapter LED lights amber for a 2.4 GHz WiFi connection and blue for a 5 GHz WiFi connection. Join a Network Using WPS 1. Press and hold the WPS button on the adapter for two seconds. The adapter LED blinks. 2. Within two minutes, press the WPS button on your WiFi router or gateway. The adapter joins the network, which can take a few minutes. Your settings are saved in a profile. The adapter LED lights amber for a 2.4 GHz WiFi connection and blue for a 5 GHz WiFi connection. Check Your Connection Status When you install your adapter, the adapter’s NETGEAR genie icon displays in the Windows system tray and on the desktop. You can double-click this icon to open NETGEAR genie to make changes or connect to a different WiFi network. The color of the icon indicates the strength of your WiFi connection: White. Strong connection Yellow. Weak connection Red. No connection If you remove your adapter, NETGEAR genie is not available, so the icon does not display. When you insert the adapter again, the icon returns. Support Thank you for purchasing this NETGEAR product. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netg…

Text truncated - open the document above for the full version.

NETGEAR INC. 2350 East Plumeria Drive, San Jose CA 96134, USA Tel: 408-890-3657 Fax: 408-907-8097 Declaration for no non-US channel operation October 15, 2014 We, Netgear INC. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non- US channels in all the operational mode(s) for the following product. FCC ID: PY314400296 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Name: David Kay/ Title: Regulatory Compliance Manager Netgear INC. Tel: 408-890-3657 Fax: 408-907-8097 E-mail: [email protected]

NETGEAR INC. 2350 East Plumeria Drive, San Jose CA 96134, USA Tel: 408-890-3657 Fax: 408-907-8097 DFS client device channel plan and software operational declaration Date: 2014-11-04 We, Netgear Inc., declare that the device, FCC ID: PY314400296 Model Name:WNDA3100v3, does not have “Ad Hoc on non-US frequencies” and/or “on DFS frequencies. Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. Below is the channel / frequency plan for the device Also, on DFS channels, the WLAN driver in the device operates under the control of an AP at all times, except when in ad-hoc mode, on US non-DFS channels. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is protected by special signature and CRC checksum. Signature and CRC checksum will be calculated and verified before firmware upgrade. Unauthorized modification to firmware will lead the failure of verification thus firmware upgrade is not allowed. Sincerely yours, ----------------------------------- Name: David Kay/ Title: Regulatory Compliance Manager Netgear INC. Tel: 408-890-3657 Fax: 408-907-8097 E-mail: [email protected] CH 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Scan Type Active Active Active Active Active Active Active Active Active Active Active CH 36 38 40 42 44 48 52 54 56 58 60 Frequency (MHz) 5180 5190 5200 5210 5220 5240 5260 5270 5280 5290 5300 Scan Type Active Active Active Active Active Active Passive Passive Passive Passive Passive CH 62 64 Frequency (MHz) 5310 5320 Scan Type Passive Passive CH 100 102 104 106 108 110 112 116 132 134 136 Frequency (MHz) 5500 5510 5520 5530 5540 5550 5560 5580 5660 5670 5680 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 140 Frequency (MHz) 5700 Scan Type Passive CH 149 151 153 155 157 159 161 165 Frequency (MHz) 5745 5755 5765 5775 5785 5795 5805 5825 Scan Type Active Active Active Active Active Active Active Active

NETGEAR INC. 2350 East Plumeria Drive, San Jose CA 96134, USA Tel: 408-890-3657 Fax: 408-907-8097 Date: 2014-10-15 FCC ID: PY314400296 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Software Operational Description Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Name: David Kay/ Title: Regulatory Compliance Manager Netgear INC. Tel: 408-890-3657 Fax: 408-907-8097 E-mail: [email protected]

NETGEAR INC. 2350 East Plumeria Drive, San Jose CA 96134, USA Tel: 408-890-3657 Fax: 408-907-8097 Date: 2014-10-15 FCC ID: PY314400296 IC ID: 4054A-14400296 A U T H O R I Z A T I O N L E T T E R To whom it may concern: We, the undersigned, hereby authorize Andrea Hsia / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC15C/E & Canada application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------- Name: David Kay/ Title: Regulatory Compliance Manager Netgear INC. Tel: 408-890-3657 Fax: 408-907-8097 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Label Location

THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDDATE SHEET: AUTHOR:TITLE: P/N: REV: 1 of 1 01 INITIAL DOCUMENT CREATION M HUMPHREY29OCT14 M HUMPHREYAW, WNDA3100, V3, PLBL AW-12990-0101 NOTE: 1. REFER TO NETGEAR SPEC. FD-10117-01 FOR LABEL MATERIAL AND ADHESIVE SPECIFICATIONS. 2. INK COLOR: PANTONE PROCESS BLACK C AND PMS 877C COLOR TOLERANCE: DELTA E 2.0 MAX 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT.

Page 4 Page 5 Page 6 Page 7

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 26 Report No. : SA140730C07 Issued Date : Oct. 31, 2014 FCC SAR Test Report Report No. : SA140730C07 Applicant : NETGEAR INC. Address : 350 East Plumeria Drive, San Jose, CA 95134, USA Product : NETGEAR N600 WiFi USB Adapter FCC ID : PY314400296 Brand : NETGEAR Model No. : WNDA3100v3 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r03 / KDB 248227 D01 v01r02 KDB 447498 D01 v05r02 / KDB 447498 D02 v02 Sample Received Date : Jul. 29, 2014 Date of Testing : Oct. 06, 2014 ~ Oct. 08, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Evonne Liu / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 26 Report No. : SA140730C07 Issued Date : Oct. 31, 2014 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 16 3.4.5 SAR Averaged Methods .....................…

Text truncated - open the document above for the full version.

Report No.: RF140730C07-2 1 of 24 Report Format Version 5.1.0 DFS TEST REPORT REPORT NO.: RF140730C07-2 MODEL NO.: WNDA3100v3 FCC ID: PY314400296 RECEIVED: Jul. 29, 2014 TESTED: Sep. 23 ~ Sep. 24, 2014 ISSUED: Sep. 25, 2014 APPLICANT: NETGEAR INC. ADDRESS: 350 East Plumeria Drive, San Jose, CA 95134, USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch TEST LOCATION: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140730C07-2 2 of 24 Report Format Version 5.1.0 Table of Contents RELEASE CONTROL RECORD ............................................................................................ 3 1. CERTIFICATION ......................................................................................................... 4 2. EUT INFORMATION ................................................................................................... 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ........................................ 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION .......................................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT ....................................... 5 2.4 EUT HIGHEST AND LOWEST CONDUCTED POWER ............................................. 6 2.5 EUT HIGHEST AND LOWEST E.I.R.P. POWER ........................................................ 7 2.6 TRANSMIT POWER CONTROL (TPC) ...................................................................... 8 2.7 STATEMENT OF MAUNFACTURER .......................................................................... 8 3. U-NII DFS RULE REQUIREMENTS ........................................................................... 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS .................................................. 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ............................................... 10 4. TEST & SUPPORT EQUIPMENT LIST ..................................................................... 13 4.1 TEST INSTRUMENTS .............................................................................................. 13 4.2 DESCRIPTION OF SUPPORT UNITS ...................................................................... 13 5. TEST PROCEDURE ................................................................................................. 14 5.1 ADT DFS MEASUREMENT SYSTEM: ..................................................................... 14 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: .................................. 15 5.3 DEVIATION FROM TEST STANDARD ..................................................................... 16 5.4 RADIATED TEST SETUP CONFIGURATION .......................................................... 16 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE ..................................................... 16 6. TEST RESULTS ........................................................................................................ 17 6.1 SUMMARY OF TEST RESULT ................................................................................. 17 6.2 DETAILED TEST RESULTS ...................................................................................... 18 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE ....................................................................................................................... 18 6.2.2 DFS DETECTION THRESHOLD .............................................................................. 18 6.2.3 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME .................... 19 6.2.4 NON- OCCUPANCY PERIOD ................................................................................... 21 6.2.4 NON-ASSOCIATED TEST ........................................................................................ 23 6.2.5 NON- CO-CHANNEL TEST ...................................................................................... 23 7. TESTING LABORATORIES INFORMATION ............................................................ 24 Report No.: RF140730C07-2 3 of 24 Report Format Version 5.1.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF140730C07-2 Original release Sep. 25, 2014 Report No.: RF140730C07-2 4 of 24 Report Format Version 5.1.0 1. CERTIFICATION PRODUCT: NETGEAR N600 WiFi USB Adapter MODEL: WNDA3100v3 BRAND: NETGEAR APPLICANT: NETGEAR INC. TESTED: Sep. 23 ~ Sep. 24, 2014 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Su…

Text truncated - open the document above for the full version.

Report No.: RF140730C07 1 of 58 Report Format Version 5.2.1 FCC TEST REPORT REPORT NO.: RF140730C07 MODEL NO.: WNDA3100v3 FCC ID: PY314400296 RECEIVED: Jul. 29, 2014 TESTED: Aug. 13 ~ Oct. 17, 2014 ISSUED: Oct. 20, 2014 APPLICANT: NETGEAR INC. ADDRESS: 350 East Plumeria Drive, San Jose, CA 95134, USA ISSUED BY: Bureau Veritas Consumer Produc…

Text truncated - open the document above for the full version.