PY319400468ORBI LTE Router LBR20

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Data Sheet LBR20 4G LTE WiFi Router Overview The Orbi ™ 4G LTE Whole Home WiFi Router delivers up to 2.2Gbps high- performance WiFi on 4G LTE networks. It has a sleek, modern design with high- gain internal antennas for up to 2,000 sq ft of coverage. The Orbi ™ 4G LTE WiFi Router with integrated cellular modem is compatible with select Orbi AC Satellites to create a mesh WiFi system, supporting seamless 4K streaming and gaming everywhere in your home. Features PAGE 1 OF 4 Always-on Internet. Seamlessly switch over to 4G LTE when your existing Internet service fails. Super-fast WiFi up to 2.2Gbps ‡ . Enjoy seamless 4K HD video streaming & gaming everywhere in your home. Increase WiFi Coverage. Add an Orbi AC Satellite to create a Mesh WiFi System and expand your WiFi coverage (sold separately). Use Your Cellular Service for Your Internet Connection. Compatible with major 4G LTE service providers by simply inserting a SIM card. Data Sheet LBR20 4G LTE WiFi Router House Diagram PAGE 2 OF 4 Get Started with the Orbi app Use the Orbi app to setup and manage your Orbi WiFi. Available on Google Play and Apple App Store. NETGEAR Armor empowers you to eliminate vulnerabilities or simply know the status of your home network and devices, anytime, anywhere. Get instant notifications when malicious threats are detected, block unknown devices from joining your Orbi home network or take action on vulnerabilities as they are discovered easily through the Orbi App. Advanced Cyber Security for All Your Devices NETGEAR Armor ™ | Powered by Bitdefender ® Learn more at NETGEAR.com/armor Better WiFi. Anywhere. Data Sheet LBR20 4G LTE WiFi Router PAGE 3 OF 4 LTE Antenna Connector (not included) LTE Antenna Connector (not included) WAN/LAN1 and LAN2 ports LTE NanoSIM card (not included) Sync Orbi 4G LTE WiFi Router (LBR20) Data Sheet LBR20 4G LTE WiFi Router This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller. www.netgear.com/warranty * 90-day complimentary technical support following purchase from a NETGEAR authorized reseller. ** Orbi AC Satellites sold separately. ‡ Maximum wireless signal range derived from IEEE standard 802.11 specifications. Actual data throughput and data over distance will vary. Network conditions and environmental factors, including volume of network traffic, building material and construction, and network overhead, result in lower actual data throughput rate and wireless coverage. 1 NETGEAR Armor ™ is free during the trial period. A yearly subscription, after the trial period, protects all of your connected devices. Visit www.netgear.com/armor 2 Circle ® includes the Free Basic Plan. Fees apply for a Premium Plan. Visit netgear.com/circle for more information. For regulatory compliance information, visit http://www.NETGEAR.com/about/regulatory For indoor use only. NETGEAR, the NETGEAR Logo, NETGEAR Armor, and Orbi are trademarks of NETGEAR, Inc. Any other trademarks mentioned herein are for reference purposes only. © 2019 NETGEAR, Inc. NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA D-LBR20-0 Technical Specifications • Orbi AC2200 LTE WiFi Router (866 + 866 + 400 Mbps) ‡ • AC2200 Simultaneous Tri-band WiFi - Radio 1: 400 Mbps @ 2.4 GHz: Supports 256-QAM - Radio 2: 866 Mbps @ 5 GHz: Supports 256-QAM - Radio 3: 866 Mbps @ 5 GHz: Supports 256-QAM • IEEE ® 802.11 a/b/g/n/ac • LTE Cat 18 up to 1.2 Gbps ‡ • NA - 4G band (LTE-FDD): B2,4,5,7,12,13,14,17,25, 26,29,30,66 ,71 - 4G band (LTE-TDD): B41 - 3G band: B1,4,5 Physical Specifications • Dimensions: 6.7 x 3.1 x 8.9 in (170 x 79 x 226 mm) • Weight: 1.72 lb (0.78 kg) PAGE 4 OF 4 What’s In the Box? • One (1) Orbi 4G LTE WiFi Router (LBR20) • One (1) 2 m Ethernet cable • One (1) 12 V / 2.5 A power adapter • Quick start guide What Do I Need for Orbi to Work? • High-speed Internet connection • Activated LTE SIM card • Orbi app • DO NOT purchase a second Orbi Router if you need to expand your WiFi coverage • To expand your Orbi WiFi system, purchase an Orbi AC Satellite (RBS50, RBS50Y, RBS40, RBS40V, RBW30 or RBS20), sold separately, for additional WiFi coverage • EU & AU - 4G band (LTE-FDD): B1,3,5,7,8,20,28 - 4G band (LTE-TDD): B38,40,41 - 3G band: B1,3,5,8 • MU-MIMO capable for simultaneous data streaming • Implicit & Explicit Beamforming for 2.4 GHz & 5 GHz bands • Two (2) 10/100/1000Mbps Gigabit Ethernet ports - One (1) WAN/LAN & one (1) LAN • Two (2) External LTE antenna connectors (antennas not included) • Security - Comprehensive anti-virus & data theft protection for your PC, Mac ® and mobile devices with NETGEAR Armor ™ - Standards-based WiFi Security (802.11i, 128-bit AES encryption with PSK) - Guest WiFi Network is easy to setup separate & secure Internet access for guests • Voice Control - Amazon Alexa ™ - The Google © Assistant • Circle ® — Smart Parental Controls to manage content and time online for all your devices. Learn more at netgear. com/circle

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Date: April 29, 2020 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ NETGEAR, Inc. _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: PY319400468 Product Description: ORBI LTE Router LBR20 Model: LBR20 Sincerely,

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2020/4/24 FCC ID: PY319400468 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description So ftware Operational Description Operational Description-Antenna Specification The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------ David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Federal Communications Commission Authorization and Evaluation Division Date: April 24, 2020 Confidentiality Request FCC ID: PY319400468 Pu rsuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ------------------------------------------------------ David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA T el :408-890-3657/Fax:408-907-8097 POWER OF ATTORNEY Da te: 2020/04/24 FCC ID: PY319400468 To whom it may concern: We, the undersigned, hereby authorize Joanna Hung of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Joanna Hung of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to Contact us. Thank you! Sincerely yours, ------------------------------------------------------ David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

Reference No.: 191030C05-FCC-1 Page No. 1 / 9 CONSTRUCTION PHOTOS OF EUT Reference No.: 191030C05-FCC-1 Page No. 2 / 9 Reference No.: 191030C05-FCC-1 Page No. 3 / 9 Reference No.: 191030C05-FCC-1 Page No. 4 / 9 Reference No.: 191030C05-FCC-1 Page No. 5 / 9 Reference No.: 191030C05-FCC-1 Page No. 6 / 9 Reference No.: 191030C05-FCC-1 Page No. 7 / 9 Reference No.: 191030C05-FCC-1 Page No. 8 / 9 Reference No.: 191030C05-FCC-1 Page No. 9 / 9

SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDD AT E NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. SN, MAC address, SSID and PASSWORD to be encoded QR (2D) barcode. A. EACH DATA ELEMENT IS TO BE SEPARATED BY A SEMICOLON WITH NO SPACE, AND TO BE PRINTED IN THIS EXACT ORDER. Element: WIFI:S:SSID;T:WPA2;P:PASSWORD;SN:SERIAL;SK:SKU;MAC:MAC; Example: WIFI:S:NETGEAR-08;T:WPA2;P:HEAVYLOTUS141;SN:510789235724097;SK:LBR20-100 NAS;MAC:8A:00:27:C5:84:B4; 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). 03AW-14479-011 of 1 AW, PLBL,LBR20 NA,V1R HU 30OCT19R HUINITIAL RELEASE01 12DEC19R HUUPDATED NOTE 602 18FEB20R HUADDED FCC ID03 Pantone Black 17.5mm 17.5mm 7 6

Reference No.: 191030C05-FCC-2 Page No. 1 / 11 CONSTRUCTION PHOTOS OF EUT Reference No.: 191030C05-FCC-2 Page No. 2 / 11 Reference No.: 191030C05-FCC-2 Page No. 3 / 11 Reference No.: 191030C05-FCC-2 Page No. 4 / 11 Reference No.: 191030C05-FCC-2 Page No. 5 / 11 Reference No.: 191030C05-FCC-2 Page No. 6 / 11 Reference No.: 191030C05-FCC-2 Page No. 7 / 11 Reference No.: 191030C05-FCC-2 Page No. 8 / 11 Reference No.: 191030C05-FCC-2 Page No. 9 / 11 Reference No.: 191030C05-FCC-2 Page No. 10 / 11 Reference No.: 191030C05-FCC-2 Page No. 11 / 11

Report No.: SA191030C05 Page No. 1 / 7 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA191030C05 FCC ID: PY319400468 Contains FCC ID: XMR202002EG18NA Test Model: LBR20 Received Date: Oct. 30, 2019 Test Date: Feb. 12 ~ Mar. 13, 2020 Issued Date: Apr. 17, 2020 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA191030C05 Page No. 2 / 7 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SA191030C05 Page No. 3 / 7 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA191030C05 Original release. Apr. 17, 2020 Report No.: SA191030C05 Page No. 4 / 7 Report Format Version: 6.1.1 1 Certificate of Conformity Product: ORBI LTE Router LBR20 Brand: NETGEAR Test Model: LBR20 Sample Status: Engineering Sample Applicant: NETGEAR, INC. Date of Evaluation: Feb. 12 ~ Mar. 13, 2020 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Apr. 17, 2020 Polly Chien / Specialist Approved by : , Date:Apr. 17, 2020 Bruce Chen / Senior Project Engineer Report No.: SA191030C05 Page No. 5 / 7 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA191030C05 Page No. 6 / 7 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Output Power EIRP (dBm) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WCDMA Band 2 24.3 20 0.054 1 WCDMA Band 4 24.9 20 0.061 1 LTE Band 2 24.5 20 0.056 1 LTE Band 4 25.2 20 0.066 1 LTE Band 7 24.7 20 0.059 1 LTE Band 25 24.6 20 0.057 1 LTE Band 30 22.9 20 0.039 1 LTE Band 41 24.5 20 0.056 1 LTE Band 66 24.7 20 0.059 1 LTE Band 7C 25.5 20 0.071 1 LTE Band 41C 25.4 20 0.069 1 Frequency Band (MHz) ERP (dBm) EIRP (dBm) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WCDMA Band 5 20.4 22.55 20 0.036 0.55 LTE Band 5 20.4 22.55 20 0.036 0.55 LTE Band 26 (Part 22) 20.8 22.95 20 0.039 0.55 LTE Band 12 21.0 23.15 2…

Text truncated - open the document above for the full version.

Report No.: RF191030C05-1 Page No. 1 / 86 Report Format Version:6.1.2 FCC Test Report Report No.: RF191030C05-1 FCC ID: PY319400468 Contains FCC ID: XMR202002EG18NA Test Model: LBR20 Received Date: Oct. 30, 2019 Test Date: Feb. 12 ~ Feb. 25, 2020 Issued Date: Mar. 02, 2020 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191030C05-1 Page No. 2 / 86 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and References ............................................................. 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions ................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 45 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 45 4.2.2 Test Instruments ................................................................................................................................ 45 4.2.3 Test Procedures ................................................................................................................................. 46 4.2.4 Deviation from Test Stand…

Text truncated - open the document above for the full version.

Report No.: RF191030C05-2 Page No. 1 / 29 Report Format Version: 6.1.1 FCC Test Report (Co-Located) Report No.: RF191030C05-2 FCC ID: PY319400468 Contains FCC ID: XMR202002EG18NA Test Model: LBR20 Received Date: Oct. 30, 2019 Test Date: Mar. 10 ~ Mar. 11, 2020 Issued Date: Mar. 11, 2020 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191030C05-2 Page No. 2 / 29 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions ..............................................................................................................…

Text truncated - open the document above for the full version.