PY3194004695G MHS Travel Router

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 10mm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the device a minimum of 10mm from your body when the device is switched on.

AT&T Eco Rating 2.0 only applies to the NETGEAR Nighthawk 5G Mobile Hotspot, model MR5100. For limited factors evaluated visit att.com/EcoSpace. Wireless Emergency Alerts i s a registered Trademark and Service Mark of CTIA. NETGEAR and Nighthawk are trademarks of NETGEAR, I nc. 5G is a trademark of 3GPP. 5G not available everywhere. Contains Lithium ion battery - recycle or dispose of properly. © 2020 AT&T Intellectual Property. All r ights reserved. AT&T, the AT&T logo and all other AT&T marks con tained herein are trademarks of AT&T Intellectual Property. All other marks are the property of their respective owners. Printed in USA 201-26246-01 AT&T Eco Rating 2.0 only applies to the NETGEAR Nighthawk 5G Mobile Hotspot, model MR5100. For limited factors evaluated visit att.com/EcoSpace. Wireless Emergency Alerts i s a registered Trademark and Service Mark of CTIA. NETGEAR and Nighthawk are trademarks of NETGEAR, I nc. 5G is a trademark of 3GPP. 5G not available everywhere. Contains Lithium ion battery - recycle or dispose of properly. © 2020 AT&T Intellectual Property. All r ights reserved. AT&T, t he AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property. All other marks are the property of their respective owners. Printed in USA 201-26246-01 Nighthawk ® 5 G Mobile Hotspot Pro Let’s get started Install the Battery 1 Insert the battery. 2 Install the back cover. The battery is partially charged. T o fully charge it, c onnect the USB cable to the mobile hotspot and then plug into either: A wall s ocket, using the wall charger ( faster charge option) The USB port on your l aptop The mobile hotspot comes with a preinstalled SIM card. The SIM must be activated to a data plan with AT&T. SIM card (preinstalled) Get to Know Your Mobile Hotspot What’s in the Box Nighthawk® 5G Mobile Hotspot Pro with pre-installed SIM card B attery cover B attery USB Type-C cable A C adapter Quick start guide Warranty card Set Up Your Mobile Hotspot 1 Press and hold the Power button for 2 seconds. To better safeguard your network, the first time you turn on your mobile hotspot, y ou are asked to set up your l ogin credentials. 2 Follow the onscreen instructions to customize your mobile hotspot settings. You can change settings such as the WiFi password, WiFi Manager l ogin password, and WiFi standby time. The default WiFi Manager admin login password is attadmin. The default WiFi password is on the label i nside the batt ery compartment. Signal strength Battery Network indicator Home Screen The Home screen displays the mobile hotspot’s WiFi network name and password. The network indicator l ets you know which AT&T wireless network you are connected to. WiFi network name and password Et hernet port Power button Home Back USB C port Touch screen Reset button LCD WiFi Manager You can manage the WiFi network from the LCD screen. Change the WiFi network name and password 1 On the Home screen, t ap the WiFi i con. 2. T ap WiFi a nd then select from the available WiFi networks. 3. T ap WiFi Name and enter your changes. 4 Tap WiFi Password and enter your changes. WiFi Manager You can use a browser to view the device information and messages, and to change the mobile hotspot settings. Log In 1 On the WiFi device that i s connected to your mobile hotspot, t ype http:/ /attwifimanage r/ o r http:/ /192.168.1.1 in the browser bar. 3 Log in using your admin password. The default admin login password is attadmin. LCD Settin gs Vie w or change the setti ngs On the Home screen, t ap the Settings icon. Change the WiFi band 1 On the Home screen, t ap the WiFi i con. 2 Tap Band. 3 Select the 2.4 GHz, 5 GHz, or dual WiFi band. For More Information Manage your account On the web: att.com/my ATT Compatible device and online account required. Data and messaging rates may apply for download and app usage. Need more help? On the web: att.com/Dev iceHowTo Give us a call 611 from any AT&T wireless phone, or 800.331.0500. When prompted, enter your device’s 10-digit number. Connect to the Internet The mobile hotspot Home screen displays the WiFi network name and password. The screen goes dark to save power. Press and release the Power b utton to wake the screen. On your laptop or other WiFi device 1 Open your WiFi network connection manager. 2 Find your mobile hotspot’s WiFi network name (ATT-WIFI-XXXX) and connect. 3 Enter your mobile hotspot’s WiFi password. 4 Launch your I nternet browser. More Software New DisplayBroadband Screen Lock Manage setti ngs using the NETGEAR mobile app 1. Make sure your device is connected to the Internet. 2. Download the NETGEAR mobile app from netg ear.com/mobileapps.

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 1/30/2020 FCC ID: PY319400469 We, Netgear Incorporated, declare that the device, FCC ID: PY319400469, does not support any non-US channels in all the operational mode(s). All non-US frequencies, US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------------------------- David Kay/ Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected]

Netgear Incorporated 350 East Plumeria Drive San Jose California 95134 United States Date: June 4, 2020 External Antenna Port Declaration We, Netgear Incorporated, declare that the MR5100 device, FCC ID: PY319400469, has two external antenna port connectors which are tightly covered. The external antenna ports are for product service only. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, _____________________ David Kay / Director, Regulatory Compliance Netgear Incorporated Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2020-05-06 FCC ID: PY319400469 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement Label Location Declaration letter The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! ----------------------------------------------------- David Kay/ Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected]

Netgear Incorporated 350 East Plumeria Drive San Jose California 95134 United States Date: May 21, 2020 CBSD Security Declaration We, Netgear Incorporated, declare that the MR5100 device, FCC ID: PY319400469, supports dynamic management password to protect unauthorized user login. Firmware update which include CBSD support for the MR5100 mobile hotspot is available via an over-the-air update process. The update process is secure through unique username and password device combinations that are authenticated by the proprietary update server using SSL authentication. This ensure the source of the firmware is legitimate and is protected against any unauthorized firmware modification. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, _____________________ David Kay / Director, Regulatory Compliance Netgear Incorporated Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 1/30/2020 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: PY319400469 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description - e. g. Software Operational Description - e. g. Parts List - e. g. Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ---------------------------------------------------------- David Kay / Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected]

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 1/30/2020 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: PY319400469 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days from the Grant Date. See KDB 726920. 1) External Photos 2) Test Setup Photos 3) Internal Photos 4) Users Manuals 5) Schematics 6) Block diagrams 7) Operational Descriptions The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ---------------------------------------------------------- David Kay / Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected] -------------------------------------------------------------------------------------------------------------------------------------------------- -------- DaDaDaDaDaDaDavid Kay / Regulatoryryryryryryryryryry C C C C C C C Comomomomomomomplianc e Director Netgear Incorporated

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 1/30/2020 FCC ID: PY319400469 AUTHORIZATION LETTER To Whom It May Concern: We, Netgear Incorporated hereby authorizes Amanda Wu / Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu / Senior Specialist of BV CPS Taoyuan on Netgear Incorporated’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------ David Kay / Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected]

Reference No.: 191031C08 Page 1 of 7 CONSTRUCTION PHOTOS OF EUT Brand: NETGEAR / Model: MR5100 Reference No.: 191031C08 Page 2 of 7 Reference No.: 191031C08 Page 3 of 7 Reference No.: 191031C08 Page 4 of 7 Reference No.: 191031C08 Page 5 of 7 Reference No.: 191031C08 Page 6 of 7 Reference No.: 191031C08 Page 7 of 7

FCC ID: PY319400469

Reference No.: 191031C08 Page 1 of 12 CONSTRUCTION PHOTOS OF EUT Brand: NETGEAR / Model: MR5100 Reference No.: 191031C08 Page 2 of 12 Reference No.: 191031C08 Page 3 of 12 Reference No.: 191031C08 Page 4 of 12 Reference No.: 191031C08 Page 5 of 12 Reference No.: 191031C08 Page 6 of 12 Reference No.: 191031C08 Page 7 of 12 Reference No.: 191031C08 Page 8 of 12 Reference No.: 191031C08 Page 9 of 12 Reference No.: 191031C08 Page 10 of 12 Reference No.: 191031C08 Page 11 of 12 Reference No.: 191031C08 Page 12 of 12

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 89 Report No. : SF191031C08 Issued Date : Jan. 20, 2020 SAR Test Report Report No. : SF191031C08 Applicant : Netgear, Inc. Address : 350 E. Plumeria Drive, San Jose CA 95134, USA Product : 5G MHS Travel Router FCC ID : PY319400469 Brand : NETGEAR Model No. : MR5100 Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 941225 D01 v03r01, KDB 941225 D05 v02r05, KDB 941225 D05A v01r02, KDB 941225 D06 v02r01 Sample Received Date : Nov. 04, 2019 Date of Testing : Dec. 02, 2019 ~ Jan. 11, 2020 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Rona Chen / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 89 Report No. : SF191031C08 Issued Date : Jan. 20, 2020 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................... 14 3.4.1 Area Scan and Zoom Scan Procedure .......................................................................................................... 14 3.4.2 Volume Scan Procedure ...............................................................................................................…

Text truncated - open the document above for the full version.

SAR Test Report Report Format Version 5.0.0 Issued Date : Jan. 20, 2020 Report No. : SF191031C08 Appendix C. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows.

SAR Test Report Report Format Version 5.0.0 Issued Date : Jan. 20, 2020 Report No. : SF191031C08 Appendix D. Photographs of EUT and Setup The setup photographs for SAR testing are shown as follows.

SAR Test Report Report Format Version 5.0.0 Issued Date : Jan. 20, 2020 Report No. : SF191031C08 Appendix E. SAR Plot (Reference to 0dB) LTE 2_QPSK20M_Front Face_10mm_Ch18900_1RB_OS50_Ant1 LTE 4_QPSK20M_Rear Face_10mm_Ch20175_1RB_OS50_Ant1 LTE 7_QPSK20M_Rear Face_10mm_Ch21350_1RB_OS0_Ant1 LTE 5_QPSK10M_Front Face_10mm_Ch20450_1RB_OS49_Ant1 LTE 12_QPSK10M_Front Face_10mm_Ch23130_1RB_OS24_Ant1 LTE 14_QPSK10M_Front Face_10mm_Ch23330_1RB_OS49_Ant1 LTE 30_QPSK10M_Rear Face_10mm_Ch27710_1RB_OS0_Ant1 LTE 66_QPSK20M_Rear Face_10mm_Ch132572_1RB_OS50_Ant1 n5_DFT-S_QPSK_Front Face_10mm_Ch167300_1RB_OS53_Ant1_EN-DC_w_Verify n66_DFT-S_QPSK_Front Face_10mm_Ch349000_1RB_OS53_Ant1_EN-DC_w WLAN5.3G_802.11ac VHT80_Front Face_10mm_Ch58_Ant 4 WLAN2.4G_802.11b_Front Face_10mm_Ch1_Ant 4 WLAN5.6G_802.11ac VHT80_Front Face_10mm_Ch138_Ant 4 WLAN5.8G_802.11ac VHT80_Front Face_10mm_Ch155_Ant 4

Report No.: RF191031C08-11 Page No. 1 / 13 Report Format Version: 6.1.1 CBSD-EUD Test Report Report No.: RF191031C08-11 FCC ID: PY319400469 Test Model: MR5100 Received Date: Nov. 04, 2019 Test Date: Dec. 26, 2019 Issued Date: Jan. 30, 2020 Applicant: Netgear, Inc. Address: 350 E. Plumeria Drive, San Jose CA 95134, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration/ Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191031C08-11 Page No. 2 / 13 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 4 Measurement ......................................................................................................................................... 7 4.1 End User Device additional requirements ........................................................................................... 7 4.2 Test Procedure .................................................................................................................................... 7 4.3 Test Environment ................................................................................................................................ 8 4.4 Test Equipment ................................................................................................................................... 8 4.5 Test Setup ........................................................................................................................................... 8 5 Test Result ............................................................................................................................................. 9 6 Pictures of Test Arrangements .......................................................................................................... 12 Appendix – Information of the Testing Laboratories ................................................................................. 13 Report No.: RF191031C08-11 Page No. 3 / 13 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued RF191031C08-11 Original release Jan. 30, 2020 Report No.: RF191031C08-11 Page No. 4 / 13 Report Format Version: 6.1.1 1 Certificate of Conformity Product: 5G MHS Travel Router Brand: NETGEAR Test Model: MR5100 Sample Status: Engineering sample Applicant: Netgear, Inc. Test Date: Dec. 26, 2019 Standards: FCC Part 96.47 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Jan. 30, 2020 Pettie Chen / Senior Specialist Approved by : , Date:Jan. 30, 2020 Bruce Chen / Senior Project Engineer Report No.: RF191031C08-11 Page No. 5 / 13 Report Format Version: 6.1.1 2 Summary of Test Results Applied Standard : FCC Part 96.47 FCC Clause Test Item Result Remarks 96.47(a)(1) End User Device additional requirements Pass Meet the requirement Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Modification Record There were no modifications required for compliance. Report No.: RF191031C08-11 Page No. 6 / 13 Report Format Version: 6.1.1 3 General Information 3.1 General Description of EUT Product 5G MHS Travel Rou…

Text truncated - open the document above for the full version.

Report No.: RF191031C08-7 Page No. 1 / 108 Report Format Version: 6.1.1 FCC Test Report (Part 96: LTE Band 48) Report No.: RF191031C08-7 FCC ID: PY319400469 Test Model: MR5100 Received Date: Nov. 04, 2019 Test Date: Dec. 27, 2019 ~ Jan. 17, 2020 Issued Date: Jan. 30, 2020 Applicant: Netgear, Inc. Address: 350 E. Plumeria Drive, San Jose CA 95134, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration/ Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product s…

Text truncated - open the document above for the full version.