PY320100476Cable Gateway

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

Quick Start AC1200 WiFi Cable Modem Router Model C6230 Download the Nighthawk app to get started For more information about the Nighthawk app, visit Nighthawk-app.com. Set up your modem router and activate your Internet service with the Nighthawk app. If you don’t want to use the Nighthwaki app, set up your modem router using the instructions in Set up using the router web interface, and activate your Internet service using the instructions in Activate Your Internet Service. LEDDescription WPS button with LED This button lets you use WPS to join the WiFi network without typing the WiFi password. The WPS LED blinks during this process and then lights solid. WiFi On/Off button with LED Pressing this button for two seconds turns the WiFi radios in the modem router on and off. If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you cannot use WiFi to connect to the modem router. Power • Green. Power is supplied to the modem router. • Red. Power is cut off due to a thermal error caused by heat. Move the unit to a well ventilated area and power cycle the unit. • Off. No power is supplied to the modem router. Downstream • Solid green. One or more downstream channels are locked. • Blinking green. The modem router is scanning for a downstream channel. • Off. No downstream channel is locked. Upstream • Solid green. One or more upstream channels are locked. • Blinking green. The modem router is scanning for a upstream channel. • Off. No upstream channel is locked. Internet • Solid green. The modem router is online. • Blinking green. The modem router is synchronizing with the cable provider’s cable modem termination system (CMTS). • Off. The modem router is offline. 2.4 GHz radio • Solid green. The 2.4 GHz WiFi radio is on. • Blinking green. There is WiFi activity on the 2.4 GHz band. • Off. The 2.4 GHz WiFi radio is off. 5 GHz radio• Solid green. The 5 GHz WiFi radio is on. • Blinking green. There is WiFi activity on the 5 GHz band. • Off. The 5 GHz WiFi radio is off. Ethernet• Solid green. A powered-on device is connected to an Ethernet port. • Blinking green. The Ethernet port is sending or receiving traffic. • Off. No device is connected to an Ethernet port. USB • Solid green. A USB device is connected to the port on the back panel. • Off. No USB device is connected to the port on the back panel. Thank you for purchasing this NETGEAR product. You can visit https://www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. For regulatory compliance information, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. Customer-owned cable modems might not be compatible with certain cable networks. Check with your cable Internet provider to confirm that this NETGEAR cable modem is allowed on your cable network. If you are experiencing trouble installing your modem router, contact NETGEAR at 1-866-874-8924. If you are experiencing trouble connecting your router, contact the router manufacturer. Note to CATV system Installer- This reminder is provided to call the CATV systems installer’s attention to Section 820-93 of the National Electrical Code, which provides guidelines for proper grounding and in particular, specifies that coaxial cable shield shall connected to the grounding system of the building, as close to the point of cable entry as practical Support NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR INTERNATIONAL LTD Floor 1, Building 3 University Technology Centre Curraheen Road, Cork, T12EF21, Ireland © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only. 1. Collect your cable Internet service provider (ISP) account information. Collect your ISP account information, such as your account mobile phone number, user name, password, and account number. 2. Turn off and disconnect existing modems and routers. If you are replacing a modem that is currently connected in your home, unplug the modem and plug the new modem router into the same outlet. 3. Connect a coaxial cable. Use a coaxial cable to connect the coaxial cable connector on the modem router to the cable wall outlet. 4. Connect the power adapter. Connect the power adapter to modem router and plug the power adapter into an electrical outlet. Set up using the router web interface The startup procedure takes about one minute. When it is complete, the Power LED lights solid green. 5. Wait for the Internet LED to light solid green. This process might take up to 10 minutes. Note: When the Internet LED lights, your modem router is still not connected to the Internet. You must activate your modem router with your ISP. 6. Connect your computer or mobile device to the modem router with Ethernet or WiFi: • Ethernet. Use an Ethernet cable to connect a computer to an Ethernet port on the modem router. • WiFi. Use the WiFi network name (SSID) and password on the product label to connect. 7. Launch a web browser and set up your modem router. You are automatically redirected to the modem router web interface. If you’re not redirected, enter routerlogin.net or 192.168.0.1 in the address field of the web browser. Follow the prompts. You are asked to do the following: • Agree to the Terms and Conditions • Change your router’s admin credentials and set up security questions • Set up your WiFi network name and password 8. Make sure that you are able to log in to the modem router web interface after the setup. The BASIC Home page displays, and lets you know whether your Internet service is activated. Package contents Cable modem router Ethernet cable Power adapter January 2020 Coaxial connector Power connector Before you start the self-activation process, collect the following information: •Your ISP acco…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 7/12/2019 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, are authorized by the applicant, Netgear Incorporated to apply Bureau Veritas Consumer Products Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: PY320100476 Product Description: Cable Gateway Model: C6230 Sincerely,

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 3 R e v 6.0 Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA T e l:408-890-3657/Fax:408-907-8097 Date: 2/26/2020 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: PY320100476 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description - e. g. Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ---------------------------------------------------------- David Kay / Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 3 of 3 R ev 6.0 Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA T el:408-890-3657/Fax:408-907-8097 Date: 2/26/2020 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: PY320100476 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days from the Grant Date. See KDB 726920. - e.g. External Photos - e.g. Internal Photos - e.g. Test Setup photos - e.g. User Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, ---------------------------------------------------------- David Kay / Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected]

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2/26/2020 FCC ID: PY320100476 AUTHORIZATION LETTER To Whom It May Concern: We, Netgear Incorporated hereby authorizes Amanda Wu / Senior Specialist of Bu reau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu / Senior Specialist of BV CPS Taoyuan on Netgear Incorporated’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------------------ David Kay / Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected]

Reference No.: 191030C10-1 Page No. 1 / 8 CONSTRUCTION PHOTOS OF EUT Reference No.: 191030C10-1 Page No. 2 / 8 Reference No.: 191030C10-1 Page No. 3 / 8 Reference No.: 191030C10-1 Page No. 4 / 8 Reference No.: 191030C10-1 Page No. 5 / 8 Reference No.: 191030C10-1 Page No. 6 / 8 Reference No.: 191030C10-1 Page No. 7 / 8 Reference No.: 191030C10-1 Page No. 8 / 8

SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDD AT E 03AW-14498-021 of 1 AW, C6230,PLBLA HAN Pantone Cool Gray 5C Black NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). 16JAN2020R HUINITIAL DOCUMENT CREATION01 22JAN2020R HUADDED FCC ID NUMBER02 22JAN2020R HUCORRECTED FCC ID NUMBER03 Made in China

Reference No.: 191030C10-2 Page No. 1 / 6 CONSTRUCTION PHOTOS OF EUT Reference No.: 191030C10-2 Page No. 2 / 6 Reference No.: 191030C10-2 Page No. 3 / 6 Reference No.: 191030C10-2 Page No. 4 / 6 Reference No.: 191030C10-2 Page No. 5 / 6 Reference No.: 191030C10-2 Page No. 6 / 6

Report No.: SA161017C17C R1 Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 191030C10 Cancels and replaces the report No.: SA161017C17C dated Jan. 07, 2020 RF Exposure Report Report No.: SA161017C17C R1 FCC ID: PY320100476 Test Model: C6230 Received Date: Oct. 30, 2019 Test Date: Nov. 08, 2019 ~ Feb. 12, 2020 Issued Date: Feb. 14, 2020 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth ourfindings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA161017C17C R1 Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 191030C10 Cancels and replaces the report No.: SA161017C17C dated Jan. 07, 2020 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SA161017C17C R1 Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 191030C10 Cancels and replaces the report No.: SA161017C17C dated Jan. 07, 2020 Release Control Record Issue No. Description Date Issued SA161017C17C Original release Jan. 07, 2020 SA161017C17C R1 Removed series model and revised FCC ID ReRecalculated MPE value. Feb. 14, 2020 Report No.: SA161017C17C R1 Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 191030C10 Cancels and replaces the report No.: SA161017C17C dated Jan. 07, 2020 1 Certificate of Conformity Product: Cable Gateway Brand: Netgear Test Model: C6230 Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: Nov. 08, 2019 ~ Feb. 12, 2020 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: IEEE C95.3 -2002 KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Feb. 14, 2020 Celine Chou / Senior Specialist Approved by : , Date:Feb. 14, 2020 Bruce Chen / Senior Project Engineer Report No.: SA161017C17C R1 Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 191030C10 Cancels and replaces the report No.: SA161017C17C dated Jan. 07, 2020 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA161017C17C R1 Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 191030C10 Cancels and replaces the report No.: SA161017C17C dated Jan. 07, 2020 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 …

Text truncated - open the document above for the full version.

Report No.: RF161017C17C-1 R1 Page No. 1 / 79 Report Format Version:6.1.2 Reference No.: 191030C10 Cancels and replaces the report No.: RF161017C17C-1 dated Jan. 07, 2020 FCC Test Report Report No.: RF161017C17C-1 R1 FCC ID: PY320100476 Test Model: C6230 Received Date: Oct. 30, 2019 Test Date: Nov. 08, 2019 ~ Feb. 12, 2020 Issued Date: Feb. 14, 2020 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF161017C17C-1 R1 Page No. 2 / 79 Report Format Version:6.1.2 Reference No.: 191030C10 Cancels and replaces the report No.: RF161017C17C-1 dated Jan. 07, 2020 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and References ............................................................. 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions ................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 41 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 41 4.2.2 Test Instruments ................................................................................................................................ 41 4.2.3 T…

Text truncated - open the document above for the full version.

Reference No.: 191030C10 Page No. 1 / 5 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Test Mode A Reference No.: 191030C10 Page No. 2 / 5 Conducted Emission Test Test Mode B Reference No.: 191030C10 Page No. 3 / 5 Radiated Emission Test (Above 1GHz) Reference No.: 191030C10 Page No. 4 / 5 Radiated Emission Test (Below 1GHz) Test Mode A Reference No.: 191030C10 Page No. 5 / 5 Radiated Emission Test (Below 1GHz) Test Mode B