PY320100490Nighthawk AX4 AX3000 4-Stream WiFi Router

Quick Start 1 On your mobile phone, download the Nighthawk app and follow the setup instructions. Tap the Security icon in your Nighthawk app to verify that NETGEAR Armor is activated. Your Nighthawk comes with NETGEAR Armor cybersecurity. Armor blocks online threats like hackers and phishing attempts on your devices. Check out everything you can do on the Nighthawk app! Run a speed test, pause the Internet, see all the connected devices, and more. 2 Download the Nighthawk app to install your router Secure your devices with NETGEAR Armor™ 3 Do more with the app Contents Overview RouterEthernet CablePower Adapter (varies by region) 1 Power LED 4 5 GHz WiFi LED A WiFi On/Off button with LED F Ethernet ports 1–4 2 Internet LED 5 Ethernet ports 1–4 LEDs B WPS button with LED G Reset button 3 2.4 GHz WiFi LED 6 Guest WiFi LED C Power On/Off button H LED On/Off switch D Power connector E Internet port CDEGHF Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only. NETGEAR INTERNATIONAL LTD Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland May 2020 Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period. Regulatory and Legal Troubleshooting If you’re having problems with the installation, try one of the following: • Turn off your modem and router and disconnect them. Reboot your modem. Reconnect your router to your modem, and try installing with the Nighthawk app again. • If you’re still unable to install your router using the Nighthawk app, manually install it using the router web interface. Visit http://www.routerlogin.net to access the router web interface. For more information, visit netgear.com/routerhelp. AB 1 2 3 4 6 5 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23cm between the radiator & your body.

Quick Start 1 On your mobile phone, download the Nighthawk app and follow the setup instructions. Tap the Security icon in your Nighthawk app to verify that NETGEAR Armor is activated. Your Nighthawk comes with NETGEAR Armor cybersecurity. Armor blocks online threats like hackers and phishing attempts on your devices. Check out everything you can do on the Nighthawk app! Run a speed test, pause the Internet, see all the connected devices, and more. 2 Download the Nighthawk app to install your router Secure your devices with NETGEAR Armor™ 3 Do more with the app Contents Overview RouterEthernet CablePower Adapter (varies by region) 1 Power LED 4 5 GHz WiFi LED A WiFi On/Off button with LED F Ethernet ports 1–4 2 Internet LED 5 Ethernet ports 1–4 LEDs B WPS button with LED G USB 3.0 port 3 2.4 GHz WiFi LED 6 USB 3.0 LED C Power On/Off button H Reset button D Power connector I LED On/Off switch E Internet port CDEHIGF Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only. NETGEAR INTERNATIONAL LTD Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland May 2020 Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period. Regulatory and Legal Troubleshooting If you’re having problems with the installation, try one of the following: • Turn off your modem and router and disconnect them. Reboot your modem. Reconnect your router to your modem, and try installing with the Nighthawk app again. • If you’re still unable to install your router using the Nighthawk app, manually install it using the router web interface. Visit http://www.routerlogin.net to access the router web interface. For more information, visit netgear.com/routerhelp. AB 1 2 3 4 6 5 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23cm between the radiator & your body.

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2020-07-15 FCC ID: PY320100490 Declaration for DFS master devices We, NETGEAR, INC. hereby declare that the device meets all the other requirements specified in Part 15E Section 15.407. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ------------------------------------------------------ David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel: 408-890-3657/Fax: 408-907-8097 Date: 2020/06/19 FCC ID: PY320100490 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description Operational Description-Antenna Specification The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ------------------------------------------------------ David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel: 408-890-3657/Fax: 408-907-8097 Federal Communications Commission Authorization and Evaluation Division Date: July 15, 2020 Confidentiality Request FCC ID: PY320100490 Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ------------------------------------------------------ David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 P O W E R O F A T T O R N E Y Date: 2020/06/19 FCC ID: PY320100490 To whom it may concern: We, the undersigned, hereby authorize Debby Lin of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to Contact us. Thank you! Sincerely yours, ------------------------------------------------------ David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

Netgear Incorporated 350 East Plumeria Drive San Jose California, United States 95134 TEL: 408-89-3657 FAX: 408-907-8097 Expedited Review Letter Date: 2020-07-15 To: Federal Communications Commission Equipment Authorization Division Subject: Expedited Review Approval FCC ID: PY320100490 We, the undersigned, NETGEAR, Inc., declare that the FCC ID: PY320100490 is identical to the same performance and function as previously certified DFS tested and approved FCC ID: PY318200414. The differences are as the table below: FCC ID of previously granted device FCC ID: PY318200414 FCC ID of new application FCC ID: PY320100490 Technology: MU-MIMO 802.11a/b/g/n/ac/ax RF chipset: BRCM43684 Same as previous Bandwidth information and differences: 20MHz,40MHz,80MHz,160MHz Same as previous Differences in DFS functioning, circuitry, software: RF chipset BRCM43684 Wi-Fi Chipset driver version 17.10 RC25.1503 Same RF Chipset Same Chipset driver version Same DFS functionality and behavior Same DFS circuit design Difference: Configure 5G as 2x2 in PY320100490 Differences between the products: Modulation: OFDM,OFDMA, and DSSSS Antenna Type: external dipole antenna Antenna directional gain: 5.25 GHz- 5.35 GHz, 5.56 dBi 5.47 GHz- 5.720 GHz, 6.22 dBi Modulation: Same as the previous. Antenna Type: Same as the previous. Antenna directional gain: 5.25 GHz- 5.35 GHz, 6.05 dBi 5.47 GHz- 5.720 GHz, 6.24 dBi Data processing circuitry is different. PCB layout is different. Enclosure is different Name of test labs for the grants: Test Lab: Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch ----------------------------------------------- David Kay / Director, Regulatory Compliance Tel: 4088903657 Fax: 4089078097 E-Mail: [email protected]

Reference No.:200601E14-1 Page 1/14 CONSTRUCTION PHOTOS OF EUT RAX40v2 Reference No.:200601E14-1 Page 2/14 Reference No.:200601E14-1 Page 3/14 Reference No.:200601E14-1 Page 4/14 Reference No.:200601E14-1 Page 5/14 Reference No.:200601E14-1 Page 6/14 Reference No.:200601E14-1 Page 7/14 RAX38v2 RAX35v2 Reference No.:200601E14-1 Page 8/14 Reference No.:200601E14-1 Page 9/14 Reference No.:200601E14-1 Page 10/14 Reference No.:200601E14-1 Page 11/14 Adapter: 2ABL030F 1 NA Reference No.:200601E14-1 Page 12/14 Reference No.:200601E14-1 Page 13/14 Adapter: AD2067F10 Reference No.:200601E14-1 Page 14/14

(Fig. 1) FCC ID: PY320100490 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. EUT Bottom Label

SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDD AT E 01AW-14587-021 of 1 AW,PLBL,RAX35 NA, V2 R HU Pantone Cool Gray 1C Black 7 NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). 26MAY2020R HUREMOVED V2 IN THE MODEL NUMBER01 WiGig Made in China

SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDD AT E 01AW-14615-021 of 1 AW,PLBL,RAX38 NA, V2 R HU Pantone Cool Gray 1C Black 7 NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). 26MAY2020R HUREMOVED V2 IN THE MODEL NUMBER01 WiGig Made in China

SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. REV DESCRIPTION OF REVISION ENG APPDD AT E 01AW-14586-031 of 1 AW,PLBL,RAX40 NA, V2 R HU 26MAY2020R HUREMOVED V2 IN THE MODEL NUMBER01 Pantone Cool Gray 1C Black 7 NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). WiGig Made in China

Reference No.:200601E14 Page 1/16 CONSTRUCTION PHOTOS OF EUT RAX40v2 Reference No.:200601E14 Page 2/16 Reference No.:200601E14 Page 3/16 Reference No.:200601E14 Page 4/16 Reference No.:200601E14 Page 5/16 Reference No.:200601E14 Page 6/16 Reference No.:200601E14 Page 7/16 Reference No.:200601E14 Page 8/16 Reference No.:200601E14 Page 9/16 Reference No.:200601E14 Page 10/16 Reference No.:200601E14 Page 11/16 Reference No.:200601E14 Page 12/16 Reference No.:200601E14 Page 13/16 Reference No.:200601E14 Page 14/16 Reference No.:200601E14 Page 15/16 Reference No.:200601E14 Page 16/16

Report No.: SA200601E14 Page No. 1 / 7 Report Format Version: 6.1.1 Reference No.: RF Exposure Report Report No.: SA200601E14 FCC ID: PY320100490 Test Model: RAX40v2 Series Model: RAX38v2, RAX35v2 Received Date: June 01, 2020 Test Date: June 14, 2020 Issued Date: June 23, 2020 Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA200601E14 Page No. 2 / 7 Report Format Version: 6.1.1 Reference No.: Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result ............................................................................................................................... 7 Report No.: SA200601E14 Page No. 3 / 7 Report Format Version: 6.1.1 Reference No.: Release Control Record Issue No. Description Date Issued SA200601E14 Original release. June 23, 2020 Report No.: SA200601E14 Page No. 4 / 7 Report Format Version: 6.1.1 Reference No.: 1 Certificate of Conformity Product: Nighthawk AX4 AX3000 4-Stream WiFi Router Brand: NETGEAR Test Model: RAX40v2 Series Model: RAX38v2, RAX35v2 Sample Status: ENGINEERING SAMPLE Applicant: NETGEAR, Inc. Test Date: June 14, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3-2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: June 23, 2020 Vivian Hunag / Specialist Approved by : , Date: June 23, 2020 Clark Lin / Technical Manager Report No.: SA200601E14 Page No. 5 / 7 Report Format Version: 6.1.1 Reference No.: 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 23 cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA200601E14 Page No. 6 / 7 Report Format Version: 6.1.1 Reference No.: 2.4 Antenna Gain Antenna NO. Chain No. Antenna Net Gain(dBi) Frequency range Antenna Type Connector Type Cable Length (mm) Cable Loss (dB) Dual_Ant0 2.4G_Ant0 5G_Ant1 1.87 2.4~2.4835GHz Diople i-pex(MHF) 65 0.4 2.84 5.15~5.25GHz 0.5 3.04 5.25~5.35GHz 0.5 3.23 5.47~5.725GHz 0.5 2.91 5.725~5.85GHz 0.5 Dual_Ant1 2.4G_Ant1 5G_Ant0 1.87 2.4~2.4835GHz Diople i-pex(MHF) 65 0.4 2.84 5.15~5.25GHz 0.5 3.04 5.25~5.35GHz …

Text truncated - open the document above for the full version.

Report No.: RF200601E14-3 Page No. 1 / 105 Report Format Version: 6.1.2 DFS Test Report Report No.: RF200601E14-3 FCC ID: PY320100490 Test Model: RAX40v2 Series Model: RAX38v2, RAX35v2 Received Date: June 01, 2020 Test Date: July 01 to 06, 2020 Issued Date: July 14, 2020 Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim any endorsement by TAF Report No.: RF200601E14-3 Page No. 2 / 105 Report Format Version: 6.1.2 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 EUT Information .................................................................................................................................... 5 2.1 Operating Frequency Bands and Mode of EUT .................................................................................. 5 2.2 EUT Software and Firmware Version .................................................................................................. 5 2.3 Description of Available Antennas to the EUT .................................................................................... 6 2.4 EUT Maximum and Minimum Conducted Power ................................................................................ 7 2.5 EUT Maximum and Minimum EIRP Power ......................................................................................... 7 2.6 Transmit Power Control (TPC) ............................................................................................................ 8 2.7 Statement of Manufacturer .................................................................................................................. 8 3. U-NII DFS Rule Requirements ............................................................................................................. 9 3.1 Working Modes and Required Test Items ........................................................................................... 9 3.2 Test Limits and Radar Signal Parameters ......................................................................................... 10 4. Test & Support Equipment List ......................................................................................................... 13 4.1 Test Instruments ................................................................................................................................ 13 4.2 Description of Support Units ............................................................................................................. 13 5. Test Procedure .................................................................................................................................... 14 5.1 DFS Measurement System ............................................................................................................... 14 5.2 Calibration of DFS Detection Threshold Level .................…

Text truncated - open the document above for the full version.