PY320200499WiFi Mesh Extender

AC1750 Dual Band WiFi Mesh Extender Model EX6250 Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://downloadcenter.netgear.com/other/. (If this product is sold in Canada, you can access this document in Canadian French at https://downloadcenter.netgear.com/other/.) For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. Support NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only. LEDDescription Router Link This LED indicates the WiFi connection between the extender and the router. • Solid green. Best connection. • Solid amber. Good connection. • Solid red. Poor connection. • Off. No connection. Client Link This LED indicates the WiFi connection between your computer or mobile device and the extender: • Solid green. Best connection. • Solid amber. Good connection. • Solid red. Poor connection. • Off. No connection. Power • Blinking green. The extender is booting. • Solid green. The extender is powered on. • Off. The extender is powered off. WPS • Blinking green. A WPS connection is being established. • Solid green. The extended network is enabled with WiFi security (either WPA or WPA2). • Off. The extended network is enabled without WiFi security. LED descriptions Configure a router with advanced MAC settings to work with your extender If you enabled a WiFi MAC filter, WiFi access control, or access control list (ACL) on your router, when a WiFi device connects through the extender to your router, the MAC address of the WiFi device shown on the router is translated to another MAC address. If your router’s MAC filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender but cannot get an IP address from the extender and cannot access the Internet. To allow the WiFi device to receive an IP address from the extender and access the Internet, you must provide the translated MAC address to the router. To add a translated MAC address to your router and reserve an IP address for your extender: 1. Log in to your router and disable the MAC filter, WiFi access control, or ACL. For more information about how to disable your router’s MAC filter, WiFi access control, or ACL, see your router’s documentation. 2. Power on the extender and connect all of your WiFi devices to the extender. 3. Make sure that the Router Link LED remains lit. 4. Log in to your extender: a. Launch a web browser from a computer or mobile device that is connected to your extender network. b. Log in to your extender: • If you did not enable the One WiFi Name feature, enter www.mywifiext.net in the address field of the browser. • If you enabled the One WiFi Name feature, enter one of the following URLs: ‑Windows-based computer. http://mywifiext.local/ or http://mywifiext/ ‑Mac computers and iOS devices. http://mywifiext.local/ ‑Android devices. http://<extender’s IP address>/ (for example, http://192.168.1.3/) A login page displays. c. Enter your admin user name and password and click the LOG IN button. The Status page displays. 5. Select Settings > Connected Devices. The Connected Devices page displays the MAC addresses and virtual MAC addresses for computers and WiFi devices that are connected to the extender network. 6. On the router, add all of the extender’s virtual MAC addresses and all of the virtual MAC addresses of the devices connected to the extender to your router’s MAC filter table. Note: To reserve a specific IP address for the extender, you must specify the first virtual MAC address that displays for your extender’s 2.4 GHz or 5 GHz network in your router’s IP reservation table. (The first virtual MAC address that displays for your extender’s 2.4 GHz and 5 GHz networks is the same.) 7. Enable the router’s MAC filter, WiFi access control, or ACL. July 2019 LEDDescription Client Arrow • Blinking. Move the WiFi‑enabled computer or mobile device closer to the extender. • Off. Your computer or moble device is within range of the extender. Router Arrow • Blinking. Move the extender closer to the router. • Off. The extender is within range of your router. NETGEAR INTERNATIONAL LTD Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland Model EX6250v2 After the setup, the One WiFi Name feature is enabled, which allows your extender to use the same WiFi network settings as your router. If you used the Nighthawk app to connect your extender, the following table lists examples of what your extended WiFi names might look like: Dual-band router WiFi namesExtended WiFi names 2.4 GHzMyWiFiExampleMyWiFiExample 5 GHzMyWiFiExample‑5GMyWiFiExample‑5G If you used WPS to connect your extender, the extended WiFi network name is based on the first WiFi network that it connected to—2.4 or 5 GHz. The following table lists examples of what your extended WiFi name might look like: Dual-band router WiFi namesExtender connects to this network Extended WiFi name for 2.4 GHz and 5 GHz 2.4 GHzMyWiFiExampleMyWiFiExampleMyWiFiExample 5 GHzMyWiFiExample‑5GMyWiFiExample 2.4 GHzMyWiFiExampleMyWiFiExample‑5G 5 GHzMyWiFiExample‑5GMyWiFiExample‑5GMyWiFiExample‑5G Connect your device to the extended networkGetting started 1. For initial setup, place your extender in the same room as your router. You can move your extender to a new location after the setup. 2. Plug the extender into an electrical outlet. 3. Wait for Power LED to light solid green. 4. If the Power LED does not light, press the On/Off b…

Text truncated - open the document above for the full version.

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 6.0 Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 2020-12-22 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: PY320200499 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application: - Block Diagram - Schematics - Operational Description - Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, David Kay / Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 6.0 Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 2020-12-15 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: PY320200499 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of / / not to exceed 180 days from the Grant Date. See KDB 726920. - User Manual - Internal Photos - External Photos - Test Setup photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, David Kay / Regulatory Compliance Director Netgear Incorporated TEL: 4088903657 FAX: 4089078097 E-mail: [email protected]

Netgear Incorporated 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2021-01-13 FCC ID: PY320200499 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: NETGEAR Inc. hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on NETGEAR Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us.

Reference No.: BBQZ-WTW-P20100749_EXT Page No. 1 / 3 CONSTRUCTION PHOTOS OF EUT Reference No.: BBQZ-WTW-P20100749_EXT Page No. 2 / 3 Reference No.: BBQZ-WTW-P20100749_EXT Page No. 3 / 3

Pantone Cool Gray 7C - NETGEAR 490-10039-01 Black White AW-14723-01 REV DESCRIPTION OF REVISION ENG APPDD AT E SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. 011 of 1 AW,PLBL,EX6250NA,V2R HU R HUINITIAL RELEASE0101NOV19 NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). Made In China

Pantone Cool Gray 7C - NETGEAR 490-10039-01 Black White AW-14727-01 REV DESCRIPTION OF REVISION ENG APPDD AT E SHEET: AUTHOR:TITLE: P/N: REV: THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. 011 of 1 AW,PLBL,EX6400NA,V3R HU R HUINITIAL RELEASE0101NOV19 NOTE: 1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. NTGR SN and MAC address barcode to be encoded AIM USS Code39 and include printed characters below barcodes. 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). Made In China AC1900 WiFi Mesh Extender Router Link Client PowerWPS Link S/N MAC MAC WPS PIN 1 2 Model: EX6400v3 272-13615-01 100-240V~50/60Hz, 0.70A www.mywif iext.net DEFAULT ACCESS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: PY320200499 Made in Thailand Made in Vietnam

Label location

Reference No.: BBQZ-WTW-P20100749_INT Page No. 1 / 9 CONSTRUCTION PHOTOS OF EUT Reference No.: BBQZ-WTW-P20100749_INT Page No. 2 / 9 WiFi 2 WiFi 1 WiFi 3 Reference No.: BBQZ-WTW-P20100749_INT Page No. 3 / 9 Reference No.: BBQZ-WTW-P20100749_INT Page No. 4 / 9 Reference No.: BBQZ-WTW-P20100749_INT Page No. 5 / 9 Reference No.: BBQZ-WTW-P20100749_INT Page No. 6 / 9 Thermal Pad 1st Reference No.: BBQZ-WTW-P20100749_INT Page No. 7 / 9 Thermal Pad 2nd Reference No.: BBQZ-WTW-P20100749_INT Page No. 8 / 9 Reference No.: BBQZ-WTW-P20100749_INT Page No. 9 / 9

Report No.: SABBQZ-WTW-P20100749 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SABBQZ-WTW-P20100749 FCC ID: PY320200499 Test Model: EX6250v2 Series Model: EX6400v3 Received Date: Nov. 18, 2020 Test Date: Nov. 23 ~ Dec. 19, 2020 Issued Date: Dec. 21, 2020 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive, San Jose, CA 95134, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth ourfindings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. . Report No.: SABBQZ-WTW-P20100749 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SABBQZ-WTW-P20100749 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SABBQZ-WTW-P20100749 Original release Dec. 21, 2020 Report No.: SABBQZ-WTW-P20100749 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: WiFi Mesh Extender Brand: NETGEAR Test Model: EX6250v2 Series Model: EX6400v3 Sample Status: Engineering sample Applicant: NETGEAR, INC. Test Date: Nov. 23 ~ Dec. 19, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Dec. 21, 2020 Polly Chien / Specialist Approved by : , Date:Dec. 21, 2020 Bruce Chen / Senior Project Engineer Report No.: SABBQZ-WTW-P20100749 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 27cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SABBQZ-WTW-P20100749 Page No. 6 / 6 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max AV Power (dBm) Directional Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) CDD Mode 2412-2462 29.18 7.07 27 0.460 1 5180-5240 28.17 7.57 27 0.409 1 5745-5825 28.84 7.63 27 0.484 1 Beamforming Mode 2412-2462 27.20 7.07 27 0.292 1 5180-5240 28.17 7.57 27 0.409 1 5745-5825 28.04 7.63 27 0.403 1 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2. The above Antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Directional gain: 2412-2462MHz: Directional gain = 10 log[(10 G1 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /3] = 7.07dBi 5180-5240MHz: Di…

Text truncated - open the document above for the full version.

Report No.: RFBBQZ-WTW-P20100749-1 Page No. 1 / 73 Report Format Version:6.1.2 FCC Test Report Report No.: RFBBQZ-WTW-P20100749-1 FCC ID: PY320200499 Test Model: EX6250v2 Series Model: EX6400v3 (refer to item 3.1 for more details) Received Date: Nov. 18, 2020 Test Date: Nov. 24 ~ Dec. 19, 2020 Issued Date: Dec. 21, 2020 Applicant: NETGEAR Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBBQZ-WTW-P20100749-1 Page No. 2 / 73 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and References ............................................................. 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Set Up ........................................................................................................................................ 17 4.1.6 EUT Operating Conditions ................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 39 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 39 4.2.2 Test Instruments ................................................................................................................................ 39 4.2.3 Test Procedures ................................................................................................................................. 40 4.2.4 Deviation from Test Standard ....................................................................…

Text truncated - open the document above for the full version.

Report No.: RFBBQZ-WTW-P20100749-2 Page No. 1 / 25 Report Format Version: 6.1.1 FCC Test Report (Co-Located) Report No.: RFBBQZ-WTW-P20100749-2 FCC ID: PY320200499 Test Model: EX6250v2 Series Model: EX6400v3 (refer to item 3.1 for more details) Received Date: Nov. 18, 2020 Test Date: Jan. 20 ~ Jan. 22, 2021 Issued Date: Jan. 22, 2021 Applicant: NETGEAR, INC. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBBQZ-WTW-P20100749-2 Page No. 2 / 25 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Description of Support Units ............................................................................................................. 12 3.3.1 Configuration of System under Test .................................................................................................. 12 3.4 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ..........................................................................................................…

Text truncated - open the document above for the full version.