PY323100585Quad-band WiFi 7 Orbi 9 Router & Quad-band WiFi 7 Orbi 9 Satellite

Device Manager Network Map Security WiFi Settings Parental Controls On Devices (8) Activated “ORBI66” Internet Speed Let’s get started Download the Orbi app and install your Orbi WiFi system Check out everything you can do on the Orbi app! Pause the Internet, run a speed test, set smart parental controls, and more. (Availability of software services can vary by region.) On your mobile phone, download the Orbi app and follow the setup instructions. 1 Secure your devices with NETGEAR Armor TM 2 Do more with the app 3 NETGEAR Armor protects your family’s WiFi with an automatic shield of security across your connected devices. Tap the Security icon in your Orbi app to verify that your subscription is activated. 1 7 6 2 3 4 5 ContentsOverview Orbi Router Ethernet cablePower adapter (2 for RBE972S) (3 for RBE973S /RBE973SB) Orbi Router 1 Sync button 2 Reset button 3 Gigabit Ethernet LAN ports 4 10G Ethernet port 5 10G Internet port 6 Power LED 7 7 Power connection Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA © NETGEAR, Inc., NETGEAR, the NETGEAR Logo and the Orbi logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only. NETGEAR INTERNATIONAL LTD Floor 6, Penrose Two, Penrose Dock, Cork, T23 YY09, Ireland March 2023 Regulatory and Legal Troubleshooting If you’re having problems with the installation, try the following: • If you already own another Orbi router and you used the Orbi app before, go to the dashboard and tap > SET UP A NEW ORBI SYSTEM. • Turn off your modem and Orbi router and disconnect them. Reboot your modem. Reconnect your Orbi router to your modem, and try installing with the Orbi app again. • If you’re still unable to install your Orbi router using the Orbi app, manually install it using the router web interface. Visit orbilogin.com to access the router web interface. For more information, visit netgear.com/orbihelp. 1 2 3 4 7 6 Orbi SatelliteOrbi Satellite (2 for RBE973S /RBE973SB) Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy‑policy. By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms‑and‑conditions. If you do not agree, return the device to your place of purchase within your return period. Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925‑7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. a. FCC regulations restrict the operation of this device to indoor use only. b. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. c. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. This device cannot operate as a subordinate between separate buildings or structures.

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-05-26 FCC ID: PY323100585 To the attention of: Federal Communications Commission Authorization and Evaluation Division 6ID / 6PP Attestation Letter We, NETGEAR, INC., attest that this device under FCC ID: PY323100585 complies with device protocol requirements and operational restrictions for Indoor Access Point Devices (6ID) and Indoor Subordinate Devices (6PP). a) When configured for Indoor Access Point mode, the method used by this indoor access point to control the associated client/subordinate power control is as follows: An 11ax IEEE AP's Transmit Power Envelope element has information fields for Power/PSD limits for connecting client/subordinate devices. The TPE information is contained in this device signals and used by connecting client/subordinate to ensure that it knows the regulatory TX powers it is allowed to transmit at. There is a regulatory info field in this device beacon and probe response frames which details this device type when the client/subordinate associates to this device. b) When configured for Indoor Subordinate mode: 1) This device will always be under the control of a low-power indoor AP and will only initiate brief messages to be under the control of an indoor low-power AP. These brief messages will only occur if the subordinate has detected a low-power indoor AP operating on a channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. 2) Once under control of an indoor access point, this device will initiate connections with clients, other access points, or other subordinate devices at a lower power or equal to the power advertised by the access point controlling this device and never above the maximum output power allowed by the FCC grant for equipment class 6PP 3) The method this device uses to inform the associated client/subordinate of its permitted maximum power is the same as described in point a) above c) This device is supplied power from a wired connection, has an integrated antenna, is not battery- powered, and does not have a weatherized enclosure. d) We acknowledge this device is subject to and in full compliance with the device restrictions listed below. All users are notified of these restrictions through the user manual. 4) This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. 5) This device is prohibited for control of or communications with unmanned aircraft systems, including drones. NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA e) When configured for subordinate mode, this device has no direct connection to the internet. WAN port is software configured to operate as a LAN port only. If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you! Sincerely yours, ----------------------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

350 East Plumeria Drive San Jose, CA 95134 TEL: +1 408 907 8000 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-02-14 FCC ID: PY3 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing NETGEAR, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing NETGEAR, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive, San Jose, CA 95134 Contact Person: David Kay Tel.: +1 408 890 3657 Email: [email protected] Signed: Andrew Kim, Chief Legal Officer

350 East Plumeria Drive San Jose, CA 95134 TEL: +1 408 907 8000 U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: NETGEAR, Inc. Grantee Code or FCC ID: PY3 Contact Name: David Kay Street Address: 350 E Plumeria Drive City/State/Zip: San Jose, CA 95134 Telephone No: 408 890 3657 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: February 9, 2023 Signed by (printed name): Andrew Kim, Chief Legal Officer

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-05-26 FCC ID: PY323100585 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-05-26 FCC ID: PY323100585 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Internal Photos Test Setup photos User’s manual Sincerely yours, ----------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-05-26 FCC ID: PY323100585 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: NETGEAR, INC. hereby authorizes Trista TSAI / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Trista TSAI / Specialist of BV CPS Taoyuan on NETGEAR, INC.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-05-26 FCC ID: PY323100585 Declaration Letter We, NETGEAR, INC. declare that the device will enable only WLAN 2.4G, 5G and 6G function through the applicant’s proprietary firmware and is not user changeable. If you have any questions regarding the authorization, please do not hesitate to contact us. Thank you! ----------------------------------- David Kay, Regulatory Compliance Director Netgear Incorporated Tel: 4088903657 Fax: 4089078097 E-mail: [email protected]

Reference No.: BBQZ-WTW-P22100778_EXT Page 1 of 21 CONSTRUCTION PHOTOS OF EUT Brand: NETGEAR / Model: RBE971, RBE970 For RBE971 Reference No.: BBQZ-WTW-P22100778_EXT Page 2 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 3 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 4 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 5 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 6 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 7 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 8 of 21 For RBE970 Reference No.: BBQZ-WTW-P22100778_EXT Page 9 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 10 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 11 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 12 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 13 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 14 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 15 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 16 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 17 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 18 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 19 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 20 of 21 Reference No.: BBQZ-WTW-P22100778_EXT Page 21 of 21

Brand: NETGEAR Model name: RBE971, RBE970 FCC ID: PY323100585 IC: 4054A-23100585 Bottom of the EUT: EUT Label location RBE971: RBE970:

Reference No.: BBQZ-WTW-P22100778_INT Page 1 of 49 CONSTRUCTION PHOTOS OF EUT Brand: NETGEAR / Model: RBE971, RBE970 For RBE971 Reference No.: BBQZ-WTW-P22100778_INT Page 2 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 3 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 4 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 5 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 6 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 7 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 8 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 9 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 10 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 11 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 12 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 13 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 14 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 15 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 16 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 17 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 18 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 19 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 20 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 21 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 22 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 23 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 24 of 49 For RBE970 Reference No.: BBQZ-WTW-P22100778_INT Page 25 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 26 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 27 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 28 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 29 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 30 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 31 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 32 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 33 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 34 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 35 of 49

Reference No.: BBQZ-WTW-P22100778_INT Page 36 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 37 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 38 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 39 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 40 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 41 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 42 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 43 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 44 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 45 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 46 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 47 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 48 of 49 Reference No.: BBQZ-WTW-P22100778_INT Page 49 of 49

Report No.: MFBBQZ-WTW-P22100778 Page No. 1 / 11 Report Format Version: 7.1.0 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1091) Report No.: MFBBQZ-WTW-P22100778 FCC ID: PY323100585 Product: Quad-band WiFi 7 Orbi 9 Router & Quad-band WiFi 7 Orbi 9 Satellite Brand: NETGEAR Model No.: RBE971 Series Model: RBE970 Received Date: 2022/11/2 Test Date: 2023/4/19 Issued Date: 2023/5/31 Applicant and Manufacturer: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kewi Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 Approved by: , Date: 2023/5/31 Jeremy Lin / Project Engineer This test report consists of 11 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Gina Liu / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBBQZ-WTW-P22100778 Page No. 2 / 11 Report Format Version: 7.1.0 Table of Contents Release Control Record ....................................................................................................................................................... 3 1 Certificate .................................................................................................................................................................... 4 2 Measurement Uncertainty ......................................................................................................................................... 5 3 Applicable RF Exposure Limit .................................................................................................................................. 5 4 Test Results ................................................................................................................................................................ 9 4.1 RF Exposure ............................................................................................................................................................. 9 5 Conclusion ................................................................................................................................................................ 10 6 Information of the Testing Laboratories ................................................................................................................ 11 Report No.: MFBBQZ-WTW-P22100778 Page No. 3 / 11 Report Format Version: 7.1.0 Release Control Record Issue No. Description Date Issued MFBBQZ-WTW-P22100778 Original release. 2023/5/31 Report No.: MFBBQZ-WTW-P22100778 Page No. 4 / 11 Report Format Version: 7.1.0 1 Certificate Product: Quad-band WiFi 7 Orbi 9 Router & Quad-band WiFi 7 Orbi 9 Satellite Brand: NETGEAR Test Model: RBE971 Series Model: RBE970 Sample Status: Engineering sample Applicant: NETGEAR, Inc. Test Date: 2023/4/19 FCC Rule Part: FCC Part 2 (Section 2.1091) Standard: KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Report No.: MFBBQZ-WTW-P22100778 Page No. 5 / 11 Report Format Version: 7.1.0 2 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT. Measurement Specification Expanded Uncertainty (k=2) (±) RF Exposure 1 GHz ~ 2.5 GHz 1.2 dB 2.5 GHz ~ 8 GHz 1.3 dB 3 Applicable RF Exposure Limit § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part …

Text truncated - open the document above for the full version.

Report No.: RFBBQZ-WTW-P22100778-5 Page No. 145 / 285 Report Format Version: 7.1.0 For U-NII-7 Contention Based Protocol Measurement Operation Mode Channel Bandwidth (MHz) Channel Number Channel Freq. (MHz) Injected Signal (AWGN) Antenna Gain (dBi) Path Loss (dB) (Note 3) Adjusted Power (dBm) Detection Limit EUT TX Status Freq. (MHz) Power (dBm) 802.11be 20 149 6695 6695 -60.36 2.39 0 -62.75 -62 OFF -70.36 2.39 0 -72.75 -62 Minimal -79.61 2.39 0 -82 -62 ON 320 127 6585 6430 -60.36 2.39 0 -62.75 -62 OFF -62.36 2.39 0 -64.75 -62 Minimal -79.61 2.39 0 -82 -62 ON 6585 -60.36 2.39 0 -62.75 -62 OFF -62.36 2.39 0 -64.75 -62 Minimal -79.61 2.39 0 -82 -62 ON 6740 -60.36 2.39 0 -62.75 -62 OFF -62.36 2.39 0 -64.75 -62 Minimal -79.61 2.39 0 -82 -62 ON Notes: 1. After investigation (consider antenna gain and path loss), the one representative port (Chain 3) was measured and presented in the report. 2. Adjusted Power (dBm) = Injected Signal (AWGN) Power (dBm) - Antenna Gain (dBi) + Path Loss (dB) 3. Antenna gain values include all the applicable path losses. Contention Based Protocol Detection Probability Operation Mode Channel Bandwidth (MHz) AWGN Signal Freq. (MHz) #01 #02#03#04#05#06#07#08#09#10 Detection Probability Detection Limit Test Result 802.11be 20 6695 v v vvvvvvvv100% 90% Pass 320 6430 v v vxvvvvvv 90% 90% Pass 6585 v v vvvvvvvv100% 90% Pass 6740 v v vvvvvvxv 90% 90% Pass Plots of EUT Tx waveform 802.11be (HE20) / CH149 802.11be (HE320) / CH127 Report No.: RFBBQZ-WTW-P22100778-5 Page No. 146 / 285 Report Format Version: 7.1.0 Plots of Injected signal (AWGN) level 802.11be (HE20) / CH149 802.11be (HE320) / CH127(Low Edge) 802.11be (HE320) / CH127(Middle) 802.11be (HE320) / CH127(High Edge) Plots of EUT ceased transmission in the time domain 802.11be (HE20) / CH149 802.11be (HE320) / CH127(Low Edge) 802.11be (HE320) / CH127(Middle) 802.11be (HE320) / CH127(High Edge) *That shall be EUT’s channel hopping behavior and signal coupling issue, we’ve verified it several times internally and found that the data transmission will be hopped to adjacent channels after the interference signal is detected and confirmed that the data transmission marked in blue comes from adjacent channels(signal coupling). Injected Interference signal at 1 sec Injected Interference signal at 1 sec Injected Interference signal at 1 sec Injected Interference signal at 1 sec Report No.: RFBBQZ-WTW-P22100778-5 Page No. 147 / 285 Report Format Version: 7.1.0 For U-NII-8 Contention Based Protocol Measurement Operation Mode Channel Bandwidth (MHz) Channel Number Channel Freq. (MHz) Injected Signal (AWGN) Antenna Gain (dBi) Path Loss (dB) (Note 3) Adjusted Power (dBm) Detection Limit EUT TX Status Freq. (MHz) Power (dBm) 802.11be 20 209 6995 6995 -60.61 2.22 0 -62.83 -62 OFF -70.61 2.22 0 -72.83 -62 Minimal -79.78 2.22 0 -82 -62 ON 320 191 6905 6750 -60.61 2.22 0 -62.83 -62 OFF -65.61 2.22 0 -67.83 -62 Minimal -79.78 2.22 0 -82 -62 ON 6905 -60.61 2.22 0 -62.83 -62 OFF -65.61 2.22 0 -67.83 -62 Minimal -79.78 2.22 0 -82 -62 ON 7060 -60.61 2.22 0 -62.83 -62 OFF -65.61 2.22 0 -67.83 -62 Minimal -79.78 2.22 0 -82 -62 ON Notes: 1. After investigation (consider antenna gain and path loss), the one representative port (Chain 2) was measured and presented in the report. 2. Adjusted Power (dBm) = Injected Signal (AWGN) Power (dBm) - Antenna Gain (dBi) + Path Loss (dB) 3. Antenna gain values include all the applicable path losses. Contention Based Protocol Detection Probability Operation Mode Channel Bandwidth (MHz) AWGN Signal Freq. (MHz) #01 #02#03#04#05#06#07#08#09#10 Detection Probability Detection Limit Test Result 802.11be 20 6995 v v vvvvvvvv100% 90% Pass 320 6750 v v vvvvvvvv100% 90% Pass 6905 v v vvvvvvvv100% 90% Pass 7060 x v vvvvvvvv 90% 90% Pass Plots of EUT Tx waveform 802.11be (HE20) / CH209 802.11be (HE320) / CH191 Report No.: RFBBQZ-WTW-P22100778-5 Page No. 148 / 285 Report Format Version: 7.1.0 Plots of Injected signal (AWGN) level 802.11be (HE20) / CH209 802.11be (HE320) / CH191(Low Edge) 802.11be (HE320) / CH191(Middle) 802.11be (HE320) / CH191(High Edge) Plots of EUT ceased transmission in the time domain 802.11be (HE20) / CH209 802.11be (HE320) / CH191(Low Edge) 802.11be (HE320) / CH191(Middle) 802.11be (HE320) / CH191(High Edge) *That shall be EUT’s channel hopping behavior and signal coupling issue, we’ve verified it several times internally and found that the data transmission will be hopped to adjacent channels after the interference signal is detected and confirmed that the data transmission marked in blue comes from adjacent channels(signal coupling). Injected Interference signal at 1 sec Injected Interference signal at 1 sec Injected Interference signal at 1 sec Injected Interference signal at 1 sec Report No.: RFBBQZ-WTW-P22100778-5 Page No. 149 / 285 Report Format Version: 7.1.0 Mode B For U-NII-5 Contention Based Protocol Measurement Operation Mode Channel Bandwidth (MHz) Channel Number Channel Freq. (MHz) Injected Signal (AWGN) Antenna Gain (dBi) Path Loss (dB) (Note 3) Adjusted Power (dBm) Detection Limit EUT TX Status Freq. (MHz) Power (dBm) 802.11be 20 65 6275 6275 -60.4 2.17 0 -62.57 -62 OFF -71.4 2.17 0 -73.57 -62 Minimal -79.83 2.17 0 -82 -62 ON 320 63 6265 6110 -60.4 2.17 0 -62.57 -62 OFF -67.4 2.17 0 -69.57 -62 Minimal -79.83 2.17 0 -82 -62 ON 6265 -60.4 2.17 0 -62.57 -62 OFF -67.4 2.17 0 -69.57 -62 Minimal -79.83 2.17 0 -82 -62 ON 6420 -60.4 2.17 0 -62.57 -62 OFF -67.4 2.17 0 -69.57 -62 Minimal -79.83 2.17 0 -82 -62 ON Notes: 1. After investigation (consider antenna gain and path loss), the one representative port (Chain 0) was measured and presented in the report. 2. Adjusted Power (dBm) = Injected Signal (AWGN) Power (dBm) - Antenna Gain (dBi) + Path Loss (dB) 3. Antenna gain values include all the applicable p…

Text truncated - open the document above for the full version.