PY323200597Wireless Module

350 East Plumeria Drive San Jose, CA 95134 TEL: +1 408 907 8000 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-02-14 FCC ID: PY3 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing NETGEAR, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing NETGEAR, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive, San Jose, CA 95134 Contact Person: David Kay Tel.: +1 408 890 3657 Email: [email protected] Signed: Andrew Kim, Chief Legal Officer

350 East Plumeria Drive San Jose, CA 95134 TEL: +1 408 907 8000 U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division Applicant / Designated U.S Agent Company Name: NETGEAR, Inc. Grantee Code or FCC ID: PY3 Contact Name: David Kay Street Address: 350 E Plumeria Drive City/State/Zip: San Jose, CA 95134 Telephone No: 408 890 3657 Email: [email protected] This letter is to confirm that the Applicant has designated itself as the U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Signature: Date: February 9, 2023 Signed by (printed name): Andrew Kim, Chief Legal Officer

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: June 15, 2023 We, Netgear Incorporated, declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: PY323200597 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-06-15 FCC ID: PY323200597 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-06-15 FCC ID: PY323200597 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Internal Photos Test Setup photos User’s manual Sincerely yours, ----------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-06-15 FCC ID: PY323200597 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Netgear Incorporated hereby authorizes Trista TSAI / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Trista TSAI / Specialist of BV CPS Taoyuan on Netgear Incorporated’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Regards, ----------------------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

FCC ID: PY323200597 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch June 20, 2023 Dear Application Examiner, Netgear Incorporated, FCC ID: PY323200597 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of KDB996369 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip MT7921. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is chip MT7921. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via test tool. Please see section Photographs of Test Configuration in the test report, the EUT was linked to test tools. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: PY323200597 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Trista Tsai / Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2023-06-23 Cover Letter for Referencing Test Data To Whom It May Concern: The reference device (initial application) has been granted according to 47CFR Part 15C, 15E for FCC ID: PY322100553; Granted on 04/08/2022. The variant device to be granted in this new application (FCC ID: PY323200597). For more details listed below (Reference device & Variant Device different portions), please refer to Operation Description exhibit. 1. General Descriptions of EUT 2. Device Materials 3. Device Form Factor & Photos 4. PCB Photos 5. Referencing test items 6. Spot- Check Test Plan We are taking full responsibility that the test data represents compliance for the variant device (FCC ID: PY323200597). If you have any questions, feel free to contact us. Thank you. Sincerely yours, ----------------------------------- David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: [email protected]

Reference No.: BBQZ-WTW-P23050326_Ext Page 1/13 CONSTRUCTION PHOTOS OF EUT Test tool Reference No.: BBQZ-WTW-P23050326_Ext Page 2/13 Reference No.: BBQZ-WTW-P23050326_Ext Page 3/13 Reference No.: BBQZ-WTW-P23050326_Ext Page 4/13 EUT module Reference No.: BBQZ-WTW-P23050326_Ext Page 5/13 Reference No.: BBQZ-WTW-P23050326_Ext Page 6/13 Reference No.: BBQZ-WTW-P23050326_Ext Page 7/13 Reference No.: BBQZ-WTW-P23050326_Ext Page 8/13 Model: 907X00747X22(580) Reference No.: BBQZ-WTW-P23050326_Ext Page 9/13 Model: 907X00747X11(580) Reference No.: BBQZ-WTW-P23050326_Ext Page 10/13 Reference No.: BBQZ-WTW-P23050326_Ext Page 11/13 Model: 907X00747X88 Reference No.: BBQZ-WTW-P23050326_Ext Page 12/13 Model: 907X00747X35 Reference No.: BBQZ-WTW-P23050326_Ext Page 13/13

Brand: NETGEAR Model name: MB12X FCC ID: PY323200597 IC: 4054A-23200597 Top of EUT EUT Label location

Reference No.: BBQZ-WTW-P23050326_Int Page 1/17 CONSTRUCTION PHOTOS OF EUT Reference No.: BBQZ-WTW-P23050326_Int Page 2/17 Reference No.: BBQZ-WTW-P23050326_Int Page 3/17 Reference No.: BBQZ-WTW-P23050326_Int Page 4/17 Reference No.: BBQZ-WTW-P23050326_Int Page 5/17 Reference No.: BBQZ-WTW-P23050326_Int Page 6/17 Reference No.: BBQZ-WTW-P23050326_Int Page 7/17 Reference No.: BBQZ-WTW-P23050326_Int Page 8/17 Reference No.: BBQZ-WTW-P23050326_Int Page 9/17 Reference No.: BBQZ-WTW-P23050326_Int Page 10/17 Reference No.: BBQZ-WTW-P23050326_Int Page 11/17 Reference No.: BBQZ-WTW-P23050326_Int Page 12/17 Reference No.: BBQZ-WTW-P23050326_Int Page 13/17 Reference No.: BBQZ-WTW-P23050326_Int Page 14/17 Reference No.: BBQZ-WTW-P23050326_Int Page 15/17 Reference No.: BBQZ-WTW-P23050326_Int Page 16/17 Reference No.: BBQZ-WTW-P23050326_Int Page 17/17 Model: ACA-5036-A2-CC-S

Report No.: MFBBQZ-WTW-P21120286A Page No. 1 / 10 Report Format Version: 7.1.0 Reference No.: BBQZ-WTW-P23050326 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1091) Report No.: MFBBQZ-WTW-P21120286A FCC ID: PY323200597 Product: Wireless Module Brand: NETGEAR Model No.: MB12X Received Date: 2023/5/11 Test Date: 2023/6/7 Issued Date: 2023/6/17 Applicant: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 Approved by: , Date: 2023/6/17 May Chen / Manager This test report consists of 10 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Phoebe Wang / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBBQZ-WTW-P21120286A Page No. 2 / 10 Report Format Version: 7.1.0 Reference No.: BBQZ-WTW-P23050326 Table of Contents Release Control Record ....................................................................................................................................................... 3 1 Certificate .................................................................................................................................................................... 4 2 Applicable RF Exposure Limit .................................................................................................................................. 5 3 Test Results ................................................................................................................................................................ 8 3.1 RF Exposure ............................................................................................................................................................. 8 4 Conclusion .................................................................................................................................................................. 9 5 Information of the Testing Laboratories ................................................................................................................ 10 Report No.: MFBBQZ-WTW-P21120286A Page No. 3 / 10 Report Format Version: 7.1.0 Reference No.: BBQZ-WTW-P23050326 Release Control Record Issue No. Description Date Issued MFBBQZ-WTW-P21120286A Original release. 2023/6/17 Report No.: MFBBQZ-WTW-P21120286A Page No. 4 / 10 Report Format Version: 7.1.0 Reference No.: BBQZ-WTW-P23050326 1 Certificate Product: Wireless Module Brand: NETGEAR Test Model: MB12X Sample Status: Engineering sample Applicant: NETGEAR, Inc. Test Date: 2023/6/7 FCC Rule Part: FCC Part 2 (Section 2.1091) Standard: KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Report No.: MFBBQZ-WTW-P21120286A Page No. 5 / 10 Report Format Version: 7.1.0 Reference No.: BBQZ-WTW-P23050326 2 Applicable RF Exposure Limit § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatialaverage SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the pea…

Text truncated - open the document above for the full version.

Customers: NETGEAR Inc. Customer Model No.: Master Wave Model No.907X00747X22 Product Description: Issue Date: R EV.: 00 承 認 書 APPROVAL SHEET 2022/01/21 2+5G銅管天線 2008.6.23 核准Approve主管Chief承辦Responsible MangoMattHero 客戶承認用印權億承認用印 20 22.01.21 MASTER WAVE TECHNOLOGY CO., LTD. 權億科技股份有限公司 Address: No.81-8, Longshou St., Taoyuan City, Taoyuan County 330, Taiwan (R.O.C.) Tel: +886-3-3600306 Fax: +886-3-3600979 Shengyih Electronic Plastic Co. Ltd (Shou Zhou) 聲億電子塑膠有限公司(蘇州廠) Address: No.95 Wusong south Rd of Luzhi Town Wu zhong Area Suzhou City, China Tel：+86-512-65046030 Fax：+86-512-65046033 Shengyih Electronic Co. Ltd(Dongguan) 聲億電子有限公司(東莞廠) Address: Mu-Lun Administration Area, Changping Town,Dongguan City.Guangdong Province,China Tel：+86-769-83914045 Fax：+86-769-83914046 Table of Contents Item 1. Antenna Specifications -Drawing 2. Test Report -Electrical test -Antenna Efficiency (2G) -Pattern test -Antenna Efficiency (5G) -Pattern test 3. Material Certifications -Connector -Cable 4. Packing -PE Bag -Carton Modification History: REV.Content 00 Date 2018/9/7 Electrical Test (裸測) Antenna Efficiency 2D Radiation Pattern-2.4G XZ Plane 2D Radiation Pattern-2.4G YZ Plane 2D Radiation Pattern-2.4G XY Plane Antenna Efficiency 2D Radiation Pattern-5G XZ Plane 2D Radiation Pattern-5G YZ Plane 2D Radiation Pattern-5G XY Plane 線材規格 CABLE SPECIFICATION

Customers: NETGEAR Inc. Customer Model No.: Master Wave Model No.:907X00747X11 Product Description: Issue Date: REV.: 00 承 認 書 APPROVAL SHEET 2022/01/21 2+5G銅管天線 2008.6.23 核准 Approve 主管 Chief 承辦 Responsible Mango Matt Hero 客戶承認用印 權億承認用印 2022.01.21 MASTER WAVE TECHNOLOGY CO., LTD. 權億科技股份有限公司 Address: No.81-8, Longshou St., Taoyuan City, Taoyuan County 330, Taiwan (R.O.C.) Tel: +886-3-3600306 Fax: +886-3-3600979 Shengyih Electronic Plastic Co. Ltd (Shou Zhou) 聲億電子塑膠有限公司 (蘇州廠 ) Address: No.95 Wusong south Rd of Luzhi Town Wu zhong Area Suzhou City, China Tel：+86-512-65046030 Fax：+86-512-65046033 Shengyih Electronic Plastic Manufactory (Dongguan) 聲億電子塑膠製品廠 (東莞廠) Address: Mu-Lun Administration Area, Changping Town,Dongguan City.Guangdong Province,China Tel：+86-769-83914045 Fax：+86-769-83914046 Table of Contents Item 1. Antenna Specifications -Drawing 2. Test Report -Electrical test -Antenna Efficiency -Pattern test 3. Material Certifications -Connector -Cable 4. Packing -PE Bag -Carton Modification History: REV.Content 00 Date 2022/01/21 Electrical Test (裸測) Antenna Efficiency (裸測) 2D Radiation Pattern XZ 2D Radiation Pattern YZ 2D Radiation Pattern XY Antenna Efficiency (裸測) 2D Radiation Pattern XZ 2D Radiation Pattern YZ 2D Radiation Pattern XY 線材規格 CABLE SPECIFICATION

Customers:NETGEAR Inc. Customer Model No.: Master Wave Model No.: 907X00747X88 Product Description: Issue Date: REV.:00 承 認 書 APPROVAL SHEET 2+5G 銅管天線 2022.01.21 2008.6.23 核准Approve主管Chief承辦Responsible AliceTonyLarry MASTER WAVE TECHNOLOGY CO., LTD. 權億科技股份有限公司 Address: No. 19, Hezun N. Rd., Zhongli Dist., Taoyuan City 320, Taiwan (R.O.C.) Tel: +886-3-4529998Fax: +886-3-4522866 Suzhou ShengyihElectronics Plastic Co. Ltd (Shou Zhou) 聲億電子塑膠有限公司(蘇州廠) Address: No.95 Wusong south Rd of Luzhi Town Wu zhong Area Suzhou City, China Tel：+86-512-65046030 Fax：+86-512-65046033 Shengyih Electronic Co. Ltd(Dongguan) 聲億電子有限公司(東莞廠) Address: Mu-Lun Administration Area, Changping Town,Dongguan City.Guangdong Province,China Tel：+86-769-83914045 Fax：+86-769-83914046 客戶承認用印 Customer Approved 權億承認用印 Confirmation Signature 2022.01.21 Table of Contents Item 1. Antenna Specifications -Drawing 2. Packing -PE Bag -Carton 3. Material Certifications -Connector -Cable Modification History: REV.Content 002022.01.21 Date Electrical Test Antenna Efficiency 2D Radiation Pattern 2400.2450.2500 MHz XZ Plane 2D Radiation Pattern 2400.2450.2500 MHz YZ Plane 2D Radiation Pattern 2400.2450.2500 MHz XY Plane 2D Radiation Pattern 5150~5850 MHz XZ Plane 2D Radiation Pattern 5150~5850 MHz YZ Plane 2D Radiation Pattern 5150~5850 MHz XY Plane 1 ᖙ㖾Տъ㋮ᇶ⭥ᆀ˄ᰶኡ˅ᴹ䲀ޜਨ 打" MARK "标示 位置示意图 10 2 4 5 6 7 8 9 11 3 12 線材規格 CABLE SPECIFICATION

Customers: NETGEAR Inc. Customer Model No.: Master Wave Model No.907X00747X35 Product Description: Issue Date: REV.: 01 承 認 書 APPROVAL SHEET 2022/01/21 2+5G銅管天線 核准 Approve 主管 Chief 承辦 Responsible Grace Matt Hero 客戶承認用印 權億承認用印 20 22.01.21 MASTER WAVE TECHNOLOGY CO., LTD. 權億科技股份有限公司 Address: No. 19, Hezun N. Rd., Zhongli Dist., Taoyuan City 320, Taiwan (R.O.C.) Tel: +886-3-4529998 Fax: +886-3-4522866 Shengyih Electronic Plastic Co. Ltd (Shou Zhou) 聲億電子塑膠有限公司 (蘇州廠 ) Address: No.95 Wusong south Rd of Luzhi Town Wu zhong Area Suzhou City, China Tel：+86-512-65046030 Fax：+86-512-65046033 Shengyih Electronic Co. Ltd (Dongguan) 聲億電子有限公司 (東莞廠) Address: Mu-Lun Administration Area, Changping Town,Dongguan City.Guangdong Province,China Tel：+86-769-83914045 Fax：+86-769-83914046 Table of Contents Item 1. Antenna Specifications -Drawing 2. Test Report -Electrical test -Antenna Efficiency -Pattern test 3. Material Certifications -Connector -Cable 4. Packing -PE Bag -Carton Modification History: REV.Content 00 01線長290mm更改為200mm， 更改電氣值 Date 2019/3/14 2019/5/9 Electrical Test (裸測) Antenna Efficiency (裸測) 2D Radiation Pattern-2G xy (θ = 90°) 2D Radiation Pattern-2G xz (φ = 0°) 2D Radiation Pattern-2G yz (φ = 90°) Antenna Efficiency (裸測) 2D Radiation Pattern-5G xy (θ = 90°) 2D Radiation Pattern-5G xz (φ = 0°) 2D Radiation Pattern-5G yz (φ = 90°) 線材規格 CABLE SPECIFICATION

UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm DRAWN BY： 黃琬珮 CHECKED BY：楊奇峰 DESIGNED BY：謝立庭 APPROVED BY：蔡岳霖 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：ACA-5036-A2-CC-S Specification NO. ENS000023010 A0 PAGE 1 OF 9 - ACA-5036-A2-CC-S Specification 1. APPLICATION: WLAN, 802.11b/g, Bluetooth, etc... 2. Explanation of part number : AC A 5036 A2 CCS (1) (2) _ (3) _ (4) _ (5) _ (6) (7) (1) Product Type：Chip Antenna (2) Center Frequency/Band Code : A--2.45GHz group (3) Size Code: 5.0mm(Length) x 3.6mm(Width) (4) Design Revision Code: Rev.2 (5) CC= Coupling Ceramics Type (6) Special Code: S=RoHS Compliant (7) Suffix For Special Requirements 3. Electrical Specification : ITEM SPECIFICATION Frequency Band 2.40GHz～2.50GHz VSWR Less than 2.5 Polarization Linear Layout A3 dBi Typ. *Peak Gain Layout B2.1 dBi Typ. Layout A80% Typ. *Peak Efficiency Layout B74% Typ Impedance 50Ω Typ. * Test condition: Test board size 80*40 mm Matching circuit: Pi matching circuit will be required 4. Physical Dimension : (Unit:mm) TOP view Bottom view Chip Antenna L W A B L1 W1 H ACA5036 5.2±0.3 3.7±0.3 0.45±0.25 0.45±0.25 1.1±0.20 0.55±0.20 0.70±0.15 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm DRAWN BY： 黃琬珮 CHECKED BY：楊奇峰 DESIGNED BY：謝立庭 APPROVED BY：蔡岳霖 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：ACA-5036-A2-CC-S Specification NO. ENS000023010 A0 PAGE 2 OF 9 - 5. Recommend PCB Layout : (Unit:mm) Terminal name Terminal Dimensions Pad (Feed) 1.2 X 0.75 Pad (GND) 3.8 X 1.15 Pad (GND) 3.8 X 1.15 Terminal name Terminal Dimensions Feed 1.1 X 0.55 GND 3.7 X 0.45 GND 3.7 X 0.45 PCB pad dimensions Antenna pad dimensions Pad (Feed) Pad (GND) Clearance Area (5.0 x 7.3 mm) Ground Matching Circuit Feed Line 50Ω Pad (GND) *The slot is used for tuning frequency in very limited extreme case. In most real application, this slot is not necessary. *Slot Layout A UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm DRAWN BY： 黃琬珮 CHECKED BY：楊奇峰 DESIGNED BY：謝立庭 APPROVED BY：蔡岳霖 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：ACA-5036-A2-CC-S Specification NO. ENS000023010 A0 PAGE 3 OF 9 - Terminal name Terminal Dimensions Pad (Feed) 1.2 X 0.75 Pad (GND) 3.8 X 1.15 Pad (GND) 3.8 X 1.15 Terminal name Terminal Dimensions Feed 1.1 X 0.55 GND 3.7 X 0.45 GND 3.7 X 0.45 PCB pad dimensions Antenna pad dimensions Layout B Pad (Feed) Pad (GND) Clearance Area (7.3 x 5.3 mm) Ground Matching Circuit Feed Line 50Ω Pad (GND) *The slot is used for tuning frequency in very limited extreme case. In most real application, this slot is not necessary. *Slot UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm DRAWN BY： 黃琬珮 CHECKED BY：楊奇峰 DESIGNED BY：謝立庭 APPROVED BY：蔡岳霖 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：ACA-5036-A2-CC-S Specification NO. ENS000023010 A0 PAGE 4 OF 9 - UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm DRAWN BY： 黃琬珮 CHECKED BY：楊奇峰 DESIGNED BY：謝立庭 APPROVED BY：蔡岳霖 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：ACA-5036-A2-CC-S Specification NO. ENS000023010 A0 PAGE 5 OF 9 - 6. Electrical Characteristics : Layout A：VSWR Layout B：VSWR Radiation Pattern The Gain pattern is measured in INPAQ’s FAR-field chamber. DUT is placed on the table of rotator, a standard horn antenna and Vector Network Analyzer is used to collect data. ◎ 3D Gain Pattern (2450 MHz) Layout A： Layout B： Mark Frequency VSWR 1 2400 MHz 1.65 2 2450 MHz 1.08 3 2500 MHz 1.73 MarkFrequency VSWR 1 2400 MHz 1.82 2 2450 MHz 1.33 3 2500 MHz 2.02 3D Chamber Definition UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm DRAWN BY： 黃琬珮 CHECKED BY：楊奇峰 DESIGNED BY：謝立庭 APPROVED BY：蔡岳霖 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：ACA-5036-A2-CC-S Specification NO. ENS000023010 A0 PAGE 6 OF 9 - ◎ 2D Gain Pattern (2450 MHz) . X-Y Plane X-Z Plane Y-Z Plane UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm DRAWN BY： 黃琬珮 CHECKED BY：楊奇峰 DESIGNED BY：謝立庭 APPROVED BY：蔡岳霖 THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：ACA-5036-A2-CC-S Specification NO. ENS000023010 A0 PAGE 7 OF 9 - 7. Taping Package and Label Marking: (unit: mm) (1) Quantity/Reel: 2000pcs/Reel (2) Carrier tape dimensions (3) Taping reel dimensions A0= 4.00±0.10 mm B0= 5.40±0.10 mm K0=1.02±0.10 mm UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ ANGLES＝± HOLEDIA＝± INPAQ TECHNOLOGY CO., LTD. SCALE： ----- UNIT：mm DRAWN BY： 黃琬珮 C…

Text truncated - open the document above for the full version.

Report No.: RFBBQZ-WTW-P21120286 Page No. 1 / 72 Report Format Version:7.1.0 Reference No.: BBQZ-WTW-P21120286 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart C (Section 15.247) Report No.: RFBBQZ-WTW-P21120286 FCC ID: PY322100553 Model No.: MM32X Received Date: 2022/1/20 Test Date: 2022/2/23 ~ 2022/3/11 Issued Date: 2022/4/1 Applicant and Manufacturer: NETGEAR, Inc. Address: 350 East Plumeria Drive San Jose, CA 95134 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 Approved by: , Date: 2022/4/1 Clark Lin / Technical Manager This test report consists of 72 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Cherry Chuo / Specialist This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribe…

Text truncated - open the document above for the full version.