PY326200664Nighthawk 5G M8 Pro

SAR and Power Density Test Report Report Format Version 8.0.0 Page No. : 1 of 50 Report No. : SFBBQZ-WTW-P26040594 Issued Date : Aug. 10, 2026 SAR and Power Density Test Report FCC Rule Part : CFR §2.1093 Standards : IEEE Std 1528:2013, IEC TR 63170:2018, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 941225 D01 v03r01, KDB 941225 D05 v02r05, KDB 941225 D06 v02r01 Report No. : SFBBQZ-WTW-P26040594 Applicant and Manufacturer : NETGEAR, INC. Address : 3553 N. First St., San Jose, California 95134, United States Product : Nighthawk 5G M8 Pro FCC ID : PY326200664 Brand : NETGEAR Model No. : MR8400 Sample Received Date : May 06, 2026 Date of Testing : May 22, 2026 ~ Jun. 09, 2026 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan FCC Accredited No. : TW0003 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Gordon Lin / Manager This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR and Power Density Test Report Report Format Version 8.0.0 Page No. : 2 of 50 Report No. : SFBBQZ-WTW-P26040594 Issued Date : Aug. 10, 2026 Table of Contents Release Control Record ............................................................................................................................................................... 4 1. Test Reference Guidance ...................................................................................................................................................... 5 2. Summary of Maximum SAR and Power Density Value ...................................................................................................... 6 3. Description of Equipment Under Test ................................................................................................................................. 8 4. SAR Measurement System ................................................................................................................................................... 9 4.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 9 4.2 SPEAG DASY6 System ............................................................................................................................................... 9 4.2.1 Robot ............................................................................................................................................................. 10 4.2.2 Probes ........................................................................................................................................................... 11 4.2.3 Data Acquisition Electronics (DAE) ................................................................................................................ 11 4.2.4 Phantoms ....................................................................................................................................................... 11 4.2.5 Device Holder ................................................................................................................................................ 12 4.2.6 System Validation Dipoles ............................................................................................................................. 13 4.2.7 Power Source ................................................................................................................................................ 13 4.2.8 Tissue Simulating Liquids .............................................................................................................................. 14 4.3 SAR System Verification ........…

Text truncated - open the document above for the full version.

Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 120 / 206 Report Format Version: 7.2.0 Plots of EUT Tx waveform 802.11be (EHT20) / CH193 802.11be (EHT320) / CH191 Plots of Injected signal (AWGN) level 802.11be (EHT20) / CH193 802.11be (EHT320) / CH191(Low Edge) 802.11be (EHT320) / CH191(Middle) 802.11be (EHT320) / CH191(High Edge) Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 121 / 206 Report Format Version: 7.2.0 Plots of EUT ceased transmission in the time domain 802.11be (EHT20) / CH193 802.11be (EHT320) / CH191(Low Edge) 802.11be (EHT320) / CH191(Middle) 802.11be (EHT320) / CH191(High Edge) Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 122 / 206 Report Format Version: 7.2.0 For Verify bandwidth reduction Plots of EUT ceased transmission in the frequency domain 802.11be (EHT320) / CH191(Low Edge) A 10 MHz AWGN signal (centered at 6750 MHz) is injected. The channel reduces to a 160 MHz channel centered around 6985 MHz. 802.11be (EHT320) / CH191(Middle) A 10 MHz AWGN signal (centered at 6905 MHz) is injected. The channel completely ceases operation. 802.11be (EHT320) / CH191(High Edge) A 10 MHz AWGN signal (centered at 7060 MHz) is injected. The channel reduces to a 80 MHz channel centered around 6945 MHz. Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 123 / 206 Report Format Version: 7.2.0 7.7 AC Power Conducted Emissions RF Mode 802.11be (EHT320) Channel CH 63：6265 MHz Frequency Range 150 kHz ~ 30 MHz Detector Function & Resolution Bandwidth Quasi-Peak (QP) / Average (AV), 9 kHz Input Power 120 Vac, 60 Hz Environmental Conditions 25 °C, 75% RH Tested By Vanness Huang Phase Of Power : Line (L) No Frequency Correction Factor Reading Value (dBuV) Emission Level (dBuV) Limit (dBuV) Margin (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.18910 9.76 29.52 18.18 39.28 27.94 64.08 54.08 -24.80 -26.14 2 0.23586 9.76 29.04 19.50 38.80 29.26 62.24 52.24 -23.44 -22.98 3 0.26836 9.77 25.29 17.64 35.06 27.41 61.17 51.17 -26.11 -23.76 4 0.44273 9.78 20.26 14.65 30.04 24.43 57.01 47.01 -26.97 -22.58 5 0.67003 9.79 24.88 20.71 34.67 30.50 56.00 46.00 -21.33 -15.50 6 1.21505 9.83 20.22 16.67 30.05 26.50 56.00 46.00 -25.95 -19.50 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 124 / 206 Report Format Version: 7.2.0 RF Mode 802.11be (EHT320) Channel CH 63：6265 MHz Frequency Range 150 kHz ~ 30 MHz Detector Function & Resolution Bandwidth Quasi-Peak (QP) / Average (AV), 9 kHz Input Power 120 Vac, 60 Hz Environmental Conditions 25 °C, 75% RH Tested By Vanness Huang Phase Of Power : Neutral (N) No Frequency Correction Factor Reading Value (dBuV) Emission Level (dBuV) Limit (dBuV) Margin (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16096 9.78 30.04 16.59 39.82 26.37 65.41 55.41 -25.59 -29.04 2 0.19301 9.76 26.06 13.47 35.82 23.23 63.91 53.91 -28.09 -30.68 3 0.25557 9.77 17.30 8.16 27.07 17.93 61.57 51.57 -34.50 -33.64 4 0.51313 9.79 16.44 12.17 26.23 21.96 56.00 46.00 -29.77 -24.04 5 0.64657 9.79 19.53 16.51 29.32 26.30 56.00 46.00 -26.68 -19.70 6 1.38318 9.82 19.86 15.96 29.68 25.78 56.00 46.00 -26.32 -20.22 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 125 / 206 Report Format Version: 7.2.0 7.8 Unwanted Emissions below 1 GHz Mode A RF Mode 802.11be (EHT320) Channel CH 63：6265 MHz Frequency Range 30 MHz ~ 1 GHz Detector Function & Bandwidth QP: RB=120 kHz, DET=Quasi-Peak Input Power 120 Vac, 60 Hz Environmental Conditions 23 °C, 68% RH Te s t e d B y Edison Lee Antenna Polarity & Test Distance : Horizontal at 3 m No Frequency (MHz) Emission Level (dBuV/m) Limit (dBuV/m) Margin (dB) Antenna Height (m) Table Angle (Degree) Raw Value (dBuV) Correction Factor (dB/m) 1 46.87 22.7 QP 40.0 -17.3 1.50 H 238 31.6 -8.9 2 186.04 23.8 QP 43.5 -19.7 1.00 H 294 34.4 -10.6 3 285.86 26.4 QP 46.0 -19.6 2.00 H 176 34.2 -7.8 4 597.94 28.2 QP 46.0 -17.8 1.00 H 344 29.4 -1.2 5 621.84 28.9 QP 46.0 -17.1 1.00 H 192 29.3 -0.4 6 759.61 33.4 QP 46.0 -12.6 1.50 H 342 30.8 2.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The other emission levels were very low against the limit of frequency range 30 MHz ~ 1 GHz. 5. The frequency range 9 kHz ~ 30 MHz: all emissions are more than 20 dB below the limit, therefore do not be recorded in this report. Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 126 / 206 Report Format Version: 7.2.0 RF Mode 802.11be (EHT320) Channel CH 63：6265 MHz Frequency Range 30 MHz ~ 1 GHz Detector Function & Bandwidth QP: RB=120 kHz, DET=Quasi-Peak Input Power 120 Vac, 60 Hz Environmental Conditions 23 °C, 68% RH Te s t e d B y Edison Lee Antenna Polarity & Test Distance : Vertical at 3 m No Frequency (MHz) Emission Level (dBuV/m) Limit (dBuV/m) Margin (dB) Antenna Height (m) Table Angle (Degree) Raw Value (dBuV) Correction Factor (dB/m) 1 30.00 27.2 QP 40.0 -12.8 1.50 V 230 37.5 -10.3 2 52.49 27.4 QP 40.0 -12.6 1.00 V 356 36.1 -8.7 3 152.30 20.3 QP 43.5 -23.2 1.00 V 242 28.9 -8.6 4 299.91 23.2 QP 46.0 -22.8 1.00 V 7 30.6 -7.4 5 467.20 25.5 QP 46.0 -20.5 2.00 V 222 29.6 -4.1 6 761.01 32.6 QP 46.0 -13.4 1.00 V 316 30.0 2.6 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Lev…

Text truncated - open the document above for the full version.

Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 112 / 206 Report Format Version: 7.2.0 Plots of EUT ceased transmission in the time domain 802.11be (EHT20) / CH33 802.11be (EHT320) / CH31(Low Edge) 802.11be (EHT320) / CH31(Middle) 802.11be (EHT320) / CH31(High Edge) Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 113 / 206 Report Format Version: 7.2.0 For U-NII-6 Contention Based Protocol Measurement Operation Mode Channel Bandwidth (MHz) Channel Number Channel Freq. (MHz) Injected Signal (AWGN) Antenna Gain (dBi) Path Loss (dB) (Note 3) Adjusted Power (dBm) Detection Limit EUT TX Status Freq. (MHz) Power (dBm) 802.11be 20 97 6435 6435 -70 1.19 0 -71.19 -62 OFF -73 1.19 0 -74.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 320 95 6425 6270 -73 1.19 0 -74.19 -62 OFF -76 1.19 0 -77.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 6425 -67 1.19 0 -68.19 -62 OFF -71 1.19 0 -72.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 6580 -70 1.19 0 -71.19 -62 OFF -76 1.19 0 -77.19 -62 Minimal -81 1.19 0 -82.19 -62 ON Notes: 1. After investigation (consider antenna gain and path loss), the one representative port (Chain 1) was measured and presented in the report. 2. Ad justed Power (dBm) = Injected Signal (AWGN) Power (dBm) - Antenna Gain (dBi) + Path Loss (dB) 3. Antenna gain values include all the applicable path losses. 4. This device does not use the channel puncturing mechanism for incumbent avoidance, but instead employs the bandwidth reduction mechanism to perform its function. Contention Based Protocol Detection Probability Operation Mode Channel Bandwidth (MHz) AWGN Signal Freq. (MHz) #01 #02 #03 #04 #05 #06 #07 #08 #09 #10 Detection Probability Detection Limit Te s t Result 802.11be 20 6435 v v v v v v v x v v 90% 90% Pass 320 6270 v v v v x v v v v v 90% 90% Pass 6425 v v v x v v v v v v 90% 90% Pass 6580 v v v v v v v v x v 90% 90% Pass Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 114 / 206 Report Format Version: 7.2.0 Plots of EUT Tx waveform 802.11be (EHT20) / CH97 802.11be (EHT320) / CH95 Plots of Injected signal (AWGN) level 802.11be (EHT20) / CH97 802.11be (EHT320) / CH95(Low Edge) 802.11be (EHT320) / CH95(Middle) 802.11be (EHT320) / CH95(High Edge) Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 115 / 206 Report Format Version: 7.2.0 Plots of EUT ceased transmission in the time domain 802.11be (EHT20) / CH97 802.11be (EHT320) / CH95(Low Edge) 802.11be (EHT320) / CH95(Middle) 802.11be (EHT320) / CH95(High Edge) Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 116 / 206 Report Format Version: 7.2.0 For U-NII-7 Contention Based Protocol Measurement Operation Mode Channel Bandwidth (MHz) Channel Number Channel Freq. (MHz) Injected Signal (AWGN) Antenna Gain (dBi) Path Loss (dB) (Note 3) Adjusted Power (dBm) Detection Limit EUT TX Status Freq. (MHz) Power (dBm) 802.11be 20 161 6755 6755 -68 1.19 0 -69.19 -62 OFF -72 1.19 0 -73.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 320 159 6745 6590 -74 1.19 0 -75.19 -62 OFF -77 1.19 0 -78.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 6745 -67 1.19 0 -68.19 -62 OFF -71 1.19 0 -72.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 6900 -66 1.19 0 -67.19 -62 OFF -69 1.19 0 -70.19 -62 Minimal -81 1.19 0 -82.19 -62 ON Notes: 1. After investigation (consider antenna gain and path loss), the one representative port (Chain 1) was measured and presented in the report. 2. Ad justed Power (dBm) = Injected Signal (AWGN) Power (dBm) - Antenna Gain (dBi) + Path Loss (dB) 3. Antenna gain values include all the applicable path losses. 4. This device does not use the channel puncturing mechanism for incumbent avoidance, but instead employs the bandwidth reduction mechanism to perform its function. Contention Based Protocol Detection Probability Operation Mode Channel Bandwidth (MHz) AWGN Signal Freq. (MHz) #01 #02 #03 #04 #05 #06 #07 #08 #09 #10 Detection Probability Detection Limit Te s t Result 802.11be 20 6755 v v v v v x v v v v 90% 90% Pass 320 6590 v v v v v v v x v v 90% 90% Pass 6745 v v v x v v v v v v 90% 90% Pass 6900 v v v v v v v v v x 90% 90% Pass Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 117 / 206 Report Format Version: 7.2.0 Plots of EUT Tx waveform 802.11be (EHT20) / CH161 802.11be (EHT320) / CH159 Plots of Injected signal (AWGN) level 802.11be (EHT20) / CH161 802.11be (EHT320) / CH159(Low Edge) 802.11be (EHT320) / CH159(Middle) 802.11be (EHT320) / CH159(High Edge) Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 118 / 206 Report Format Version: 7.2.0 Plots of EUT ceased transmission in the time domain 802.11be (EHT20) / CH161 802.11be (EHT320) / CH159(Low Edge) 802.11be (EHT320) / CH159(Middle) 802.11be (EHT320) / CH159(High Edge) Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 119 / 206 Report Format Version: 7.2.0 For U-NII-8 Contention Based Protocol Measurement Operation Mode Channel Bandwidth (MHz) Channel Number Channel Freq. (MHz) Injected Signal (AWGN) Antenna Gain (dBi) Path Loss (dB) (Note 3) Adjusted Power (dBm) Detection Limit EUT TX Status Freq. (MHz) Power (dBm) 802.11be 20 193 6915 6915 -69 1.19 0 -70.19 -62 OFF -72 1.19 0 -73.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 320 191 6905 6750 -74 1.19 0 -75.19 -62 OFF -77 1.19 0 -78.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 6905 -62 1.19 0 -63.19 -62 OFF -66 1.19 0 -67.19 -62 Minimal -81 1.19 0 -82.19 -62 ON 7060 -72 1.19 0 -73.19 -62 OFF -76 1.19 0 -77.19 -62 Minimal -81 1.19 0 -82.19 -62 ON Notes: 1. After investigation (consider antenna gain and path loss), the one representative port (Chain 1) was measured and presented in the report. 2. Ad justed Power (dBm) = Injected Signal (AWGN) Power (dBm) - Antenna Gain (dBi) + Path Loss (dB) 3. Antenna gain values include all the applicable path losses. 4. This device does not use the channel puncturing mechanism for incumbent avoidance, but instead employs the bandwidth reduction mechanism to perform its function. Contention Based Protocol Detection Probability Operation Mode Channel Bandwidth (MHz) AWGN Signal Freq. (MHz) #01 #02 #03 #04 #05 #06 #07 #08 #09 #10 Detection Probability Detection Limit Te s t Re…

Text truncated - open the document above for the full version.

Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 1 / 206 Report Format Version: 7.2.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart E (Section 15.407) Report No.: RFBBQZ-WTW-P26040594-6 FCC ID: PY326200664 Product: Nighthawk 5G M8 Pro Brand: NETGEAR Model No.: MR8400 Received Date: 2026/5/6 Test Date: 2026/5/26 ~ 2026/7/17 Issued Date: 2026/8/6 Applicant and Manufacturer: NETGEAR, INC. Address: 3553 N. First St., San Jose, California 95134, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City 244, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 333, Taiwan FCC Registration / Desi gnation Number: 788550 / TW0003 Approved by: , Date: 2026/8/6 Jeremy Lin / Project Engineer This test report consists of 206 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared b y : Vera Huang / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBBQZ-WTW-P26040594-6 Pa ge No. 2 / 206 Report Format Version: 7.2.0 Table of Contents Release Control Record ....................................................................................................................................................... 4 1 Certificate .................................................................................................................................................................... 5 2 Summary of Test Results .......................................................................................................................................... 6 2.1 Measurement Uncertainty ........................................................................................................................................ 6 2.2 Supplementary Information ...................................................................................................................................... 6 3 General Information ................................................................................................................................................... 7 3.1 General Description of EUT ..................................................................................................................................... 7 3.2 Antenna Description of EUT ..................................................................................................................................... 9 3.3 Channel List ............................................................................................................................................................ 10 3.4 Test Mode Applicability and Tested Channel Detail ................................................................................................ 14 3.5 Duty Cycle of Test Signal........................................................................................................................................ 16 3.6 Test Program Used and Operation Descriptions .................................................................................................... 17 3.7 Connection Diagram of EUT and Peripheral Devices ............................................................................................ 17 3.8 Configuration of Peripheral Devices and Cable Connections ................................................................................ 17 4 Test Instruments ...................................................................................................................................................... 18 4.1 Maximum RF Output Power ................................................................................................................................... 18 4.2 Maximum Power Spectral Density ......................................................................................................................... 18 4.3 Emission Bandwidth ............................................................................................................................................... 18 4.4 In-B…

Text truncated - open the document above for the full version.

DATASHEET Platform information Brand Model Number NETGEAR MR8400 WIFI Antenna information Vendor Type Antenna Part number (WLAN0) Antenna Part number (WLAN1) Pegatron WLAN0: Monopole WLAN1: PIFA 1415-0BNL0NR 1415-0BNL0NR WNC 81XYBH15.GCD 81XYBH15.GCD 2026 PEGATRON Table of Contents 1. Specifications 2. Antenna Placement 2.1 All antenna positions on the DUT 2.2 WLAN0/WLAN1 on the PCBA 3. Performance Data 3.1 Return Loss 3.2 Peak gain summary 3.3 Max 2D Radiation Pattern Plane 4. Antenna Gain Measurement Setting 4.1 Test equipment 4.2 Measurement System Far-Field Information 4.3 Test method 1. Specifications Description Antenna type WLAN0 Antenna Monopole Antenna type WLAN1 Antenna PIFA Peak Gain WLAN0 Antenna See the table 3.2.1 Peak Gain WLAN1 Antenna See the table 3.2.2 2. Antenna Placement 2.1 All Antenna Positions on the DUT Overview 2.2 WLAN0/WLAN1 on the PCBA WLAN0 WIFI7 ANT3_WWAN L/M/H/UH ANT2_WWAN M/H/UH ANT0_WWAN L/M/H/UH ANT1_WWAN M/H/UH WLAN1 WIFI7 GPS L1 IO Side PCBA ANT0_WWAN L/M/H/UH WLAN0 WIFI7 ANT1_WWAN M/H/UH WLAN1 WIFI7 IO 3. Performance Data 3.1 Return Loss 3.1.1 WLAN0 Antenna 3.1.2 WLAN1 Antenna 3.2 Peak Gain summary Table 3.2.1 PolarizationLinear Frequency (MHz) 2402-0.03 24400.54 24780.24 2483.50.24 51602.91 52002.95 52503.04 53003.06 54703.11 55503.18 56203.71 57253.65 57853.6 58003.54 58503.52 58653.48 58953.31 59253.25 61753 62002.86 64252.45 64752.33 65252.27 66952.16 68751.93 69951.85 71151.79 WIFI band WLAN0 Gain (dBi) Table 3.2.2 PolarizationLinear Frequency (MHz) 24020.69 24400.31 24780.16 2483.50.16 5160-0.08 5200-0.1 5250-0.3 5300-0.25 54700.35 55500.95 56201.44 57251.41 57851.38 58001.37 58501.36 58651.36 58951.35 59251.32 61751.2 62001.19 64251.67 64751.68 65251.95 66952.31 68752.01 69951.53 71151.26 WIFI band WLAN1 Gain (dBi) 3.3 Max 2D Radiation Pattern Plane ⚫ WLAN0 X-Y plan X-Z plan Y-Z plan 2.4G highest value : 2440 MHz X-Y plan X-Z plan Y-Z plan 5G highest value : 5620 MHz X-Y plan X-Z plan Y-Z plan 6G highest value : 6200 MHz ⚫ WLAN1 X-Y plan X-Z plan Y-Z plan 2.4G highest value : 2402 MHz X-Y plan X-Z plan Y-Z plan 5G highest value : 5620 MHz X-Y plan X-Z plan Y-Z plan 6G highest value : 6695 MHz 4. Antenna Gain Measurement Setting 4.1 Test Equipment The pieces of test equipment and software used are as follows: ⚫ The MVG SG-24-S 3D fully anechoic chamber, also known as a Satimo chamber. ⚫ Keysight ENA E5063A Network analyzer ⚫ MVG measurement software: WaveStudio 23.3 The pieces of test equipment calibration information are as follows: ⚫ MVG SG-24-S calibration date : 2025/ 11 / 25 ⚫ MVG SG-24-S expired date : 2026/ 12 / 31 ⚫ MVG SG-24-S calibration name of personnel : MVG Charles ⚫ ENA E5063A Network analyzer calibration date : 2025 / 02 / 03 ⚫ ENA E5063A Network analyzer expired date : 2027 / 02 / 02 ⚫ ENA E5063A Network analyzer calibration name of personnel : Keysight Freddy Hsu 4.2 Measurement System far-field information Based on the formulas for far-field and near-field calculations, the far-field information for the SG-24S 3D Chamber is as follows : 4.3 Test Method EIRP measurement is based on industry-standard method described in CTIA OTA Test Plan (current version 3.9.4). Peak gain is calculated by subtracting Conducted Power from the measured maximum EIRP. Testing is performed with Antenna integrated in the product Below is the measurement summary from the specification: Test date : 2026/04/11 The list of antenna engineers performed antenna passive measurement activities : - Pegatron Aries_Lin - Pegatron Junwei_Huang

Report No.: MFBBQZ-WTW-P26040594 Pa ge No. 1 / 12 Report Format Version: 7.1.0 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1091) Report No.: MFBBQZ-WTW-P26040594 FCC ID: PY326200664 Product: Nighthawk 5G M8 Pro Brand: NETGEAR Model No.: MR8400 Received Date: 2026/5/6 Test Date: 2026/7/8 ~ 2026/8/20 Issued Date: 2026/8/20 Applicant and Manufacturer: NETGEAR, INC. Address: 3553 N. First St., San Jose, California 95134, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City 244, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 333, Taiwan FCC Registration / Desi gnation Number: 788550 / TW0003 Approved by: , Date: 2026/8/20 Jeremy Lin / Project Engineer This test report consists of 12 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared b y : Polly Chien / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this repor…

Text truncated - open the document above for the full version.