PY3AC791LMobile Hot Spot

Notification of Compliance Regulatory Compliance Information This document includes user requirements for operating NETGEAR products in accordance with national laws including usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable national regulatory authority. The NETGEAR product firmware limits operation to only the channels allowed in a particular region or country. Therefore, all options described in this document may not be available in your version of the product. This document applies to both Class A and Class B devices:  Class A devices are intended to be used in a commercial or industrial environment. They are not intended to be used in a residential home or be available for general public use.  Class B devices are intended to be used in a residential setting, and may also be used in commercial and industrial applications. Examples of Class B devices are telephones, personal computers, and residential data gateways.  Fuses should only be installed by service personnel.  NETGEAR recommends the use of 26 AWG or larger gauge phone line cords. Europe – EU Declaration of Conformity This section applies to products bearing the CE or CE! mark: Products bearing the CE or CE! mark comply with the following EU directives:  EMC Directive 2004/108/EC  Low Voltage Directive 2006/95/EC  Ecodesign Directive 2009/125/EC  RoHS Directive 2011/65/EU If the product has telecommunications functionality, it also complies with the requirement of the following EU directive:  R&TTE Directive 1999/5/EC Compliance with these directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity. The EU CE Declaration of Conformity may be found at http://support.netgear.com/app/answers/detail/a_id/11621/. Caution for installing this equipment outdoors: (Valid in all EU member states, EFTA states, and Switzerland.) Be aware that outdoor installations require special attention and will only be handled by trained and qualified installation personnel. No one from the general public is permitted to install NETGEAR wireless products outdoors when external antennas, power and grounding must be installed for use. Particular attention has to be given allowed operational frequencies. Contact NETGEAR for instructions on how to contact an installer for outdoor operations if this product requires the special considerations for outdoor installations. For detailed information concerning installations in France, the user should contact the national spectrum authority in France (http://www.arcep.fr/ ) The following paragraphs apply to WN2500RP: This device is a 2.4GHz and 5GHz wideband transmission system (transceiver), intended for indoor use only in all EU member states, EFTA states, and Switzerland. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for applying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10mW EIRP in the frequency range of 2454-2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. The following paragraph applies to the LG2210: External antenna requirement: Net gain (antenna + cable) of external antenna is required to be less than 1.14dBi (minimum gain of internal antenna). Warning NETGEAR Class A products that may be utilized in domestic/residential environments may cause radio interference in which case the user may be required to take adequate measures. FCC Requirements for Operation in the United States Information in this section applies to products bearing the FCC mark (or statement): FCC Information to User This NETGEAR product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. The following statement applies to these products:  C6300  FS305v2  R6200v3  WNDR3400v3  C7000BMX  FS308v2  R6220  WNDR3700v5  D3600  FS605v4  R7500  WNDR4300v2  D3610  FS608v4  R8000  WNDR4500v3  D6000  GS205v2  STS7000  WNR2010  D6010  GS208v2  VEGN2200  WNR2020  D6200V2  GS305  VMB3000  WNR614  D7000  GS308v2  VMC3010  WNR618  EX2700  GS605v5  VMC3030  EX3700  GS608v4  WN370  EX6100  HMNC100  WN1000v4  EX6150  JNR1010v2  WN2500RP  EX6200  JR6150  WN3000RPv2  EX7000  JWNR2000v5  WN3500RP  FS205v2  JWNR2010v5  WNA1000Mv2  FS208v2  R6050  WNDA3100v3 This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. FCC Guidelines for Human Exposure The NETGEAR product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. The following statement applies to this product:  C6300BD This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 35cm between the radiator and your body. The following statement applies to this product:  C6300XB3  D7000 This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with minimum distance of 25cm between the radiator and your body. The following statement applies to this product:  R8000  C7000 This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. The dev…

Text truncated - open the document above for the full version.

Home Screen Network Signal Strength Indicator Network Technology Indicator displays when you are connected to the 4G LTE network. Activity Indicator appears when data is being transferred between the Xxxxx network and your yyyyyyy. Roaming indicator appears when you are roaming. Messages Indicator appears when you have unread Xxxxx system messages. Connected Device Indicator displays the number of devices connected to your yyyyyyy. Tethered Mode Indicator displays when your yyyyyyy has a tethered connection. Battery Indicator displays the remaining battery charge and battery charging status. Wi-Fi — View Wi-Fi Name/ Password. Connected Devices — View currently connected/blocked device details. Data Usage — View data usage and billing cycle details. Settings — View/change basic yyyyyyy and Wi-Fi settings. Universal Charging — Displays universal charging status. Software Update — View current software version and check for updates. Messages — View/delete system messages. About yyyyyyy — Displays device details/Internet status. Help — Displays Help, Tips, and Advanced features. OperationsActions Power OnTo turn ON, press and hold the Power button for 2 seconds. Power OffTo turn OFF, press and hold the Power button for 3 seconds. Display Wake-Up When the display is on, the first quick press of the Power button puts the display to sleep. Power Indicator When the yyyyyyy is powered on, the Power indicator light will blink. Get to Know Your Device yyyyyy Overview WARNING! Use only an approved charger to charge your yyyyyyy. Improper handling of the charging port, as well as the use of an incompatible charger, may cause damage to your device and void the warranty.NOTE: Appearance of device might vary. Power Button Accessory Port Accessory Port Home Screen Display Device Display Universal Charging Port & yyyyyyy Charge/Tether Select Center Option Power Indicator Navigate Left/Up Select Left Option Universal Charging Cable Connect This End To yyyyyyy Navigate Right/Down Select Right Option Step 1. Insert the Battery Align the gold contacts. Press down gently to secure the battery. Step 2. Replace the Back Cover Line up the 2 tabs on the back cover with the slots at the bottom of the yyyyyyy, and then press down along the edges to secure the cover. Step 3. Power On Your yyyyyyy Press and hold the Power button for 2 seconds. The display will illuminate. Status Bar Data Usage & Alert Panel Getting StartedGetting StartedOperation Status CAROUSEL ICONS 5 Power Button Bottom View/Top view Display Indicators STATUS ICONS Ready — A SIM card is installed and your device is ready to use. No SIM — The device does not detect a SIM. SIM Locked — You must enter a PIN to unlock the SIM and use the device. SIM Error — The device cannot read the SIM that is installed. SIM Blocked — The wrong PIN was entered too many times. Contact customer service to get the code to unblock the SIM. SIM Rejected — The device can read the SIM, but the network rejects it. SIM ICONS 4G LTE Mobile Hotspot - AC791L Connect This End To Device USB Cable Para la version en español, visite xxxxxwireless.com/support. System Requirements Your computer, tablet, or other wireless devices need Wi-Fi capability and Internet browser software only. Your yyyyyyy is compatible with all major operating systems and the latest versions of browsers. Wi-Fi Name/Password Menu You can view your yyyyyyy’s Wi-Fi name (SSID) and password using the following steps. 1. Power on your yyyyyyy by pressing and holding the Power button for 2 seconds. 2. Open the Wi-Fi Name/Password menu . Connecting to the Internet 1. Power on the yyyyyyy. 2. Open the Wi-Fi application or controls on the computer or Wi-Fi–capable device you want to connect to the yyyyyyy and find the Wi-Fi network (SSID) named “Xxxxxx-791L-XXXX.” 3. Select Connect and enter the Wi-Fi password. Your Wi-Fi–capable device is now connected to the Internet. User Guide To download a User Guide go to xxxxxxwireless.com/support and find your device. To access the User Guide from the yyyyyyy Admin website, select My yyyyyyy Home and select the Device Support Page & User Guide link under Help & Support. Get Help Using Your yyyyyyy View Help content right from your yyyyyyy. Customer Service Web http://xxxxxxwireless.com/ Support. Call (800) 922-0204. Follow us @xxxSupport. Using Your yyyyyyy Important: The default Admin password is the same as the default Wi-Fi password. To change either password, sign in to the yyyyyyy Admin website (see Accessing Advanced Settings). Managing Wi-Fi Networks and Connections When connected to the 4G LTE network, the default settings allow 15 Wi-Fi–capable devices to connect wirelessly to the primary network, one Wi-Fi–capable device to connect wirelessly to the guest network, and one additional tethered device via USB. The guest network is turned off on initial start-up. To use the guest network, you must turn it on in the Wi-Fi option of the Settings menu. To change the number of devices that can connect to either network, follow the steps below: 1. Sign in to the yyyyyyy Admin website and select yyyyyyy Settings > Wi-Fi . 2. Choose a Wi-Fi profile and then expand the Options. Monitoring Data Usage You can monitor your yyyyyyy data usage and set up usage alerts through your My Xxxxx account. You can also see current usage details on your yyyyyyy Home screen or by scrolling to the Data Usage icon and opening the menu item. SIM Card Access A SIM card is preinstalled in your yyyyyyy. If you need to replace your SIM card, remove the back cover and battery then gently push the SIM card out of SIM slot. Customer Information the other end of the USB cable to the device you wish to charge. 3. Select your charging preference: Continuous or Timed Charge. Accessing Advanced Settings To access advanced settings and manage the yyyyyyy, sign in to the yyyyyyy Admin website using the following steps: 1. Connect your Wi-Fi–capable device to the yyyyyyy using the steps outlined in the Connecti…

Text truncated - open the document above for the full version.

Netgear Incorporated Date:2015/5/8 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. SIEMIC, INC. 775 Montague Expressway Milpitas, CA 95035 To whom it may concern: I, the undersigned, hereby authorize Murphy Wang, Director of A Test Lab Techno Corp. and hereafter referred to as ATL, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Murphy Wang, Director of A Test Lab Techno Corp. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing ATL as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, David Kay Netgear Incorporated REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Netgear Incorporated 350 East Plumeria Drive, San Jose, California, United States 95134 Attestation for FCC Declaration of Conformity Brand: Netgear Model Number: AC791L Date: 2015/5/8 FCC ID: PY3AC791L Please be notified that we, Netgear Incorporated would like to declare that the composite portion categorized as computer peripheral has been authorized under the FCC Declaration of Conformity procedures. Testing in regards to this report was done by A Test Lab Techno Corp., located in No.140-1 Changan Str., Bade City Taoyuan County Taiwan, which has been accredited in accordance to all of the requirements of 47 CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, Client’s signature : Client’s name / title : David Kay / Regulatory Compliance Manager Contact information / address: 350 East Plumeria Drive, San Jose, California, United States 95134

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Netgear Incorporated Date: 2015/5/8 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Netgear Incorporated hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product description: Mobile Hot Spot , model name: AC791L FCC ID: PY3AC791L Sincerely, Client’s signature : Client’s name / title : David Kay Contact information / address: 350 East Plumeria Drive, San Jose, California, United States 95134

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 3.0 Netgear Incorporated Date: 2015/05/08 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID : PY3AC791L We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description (Antenna Information, Software Security Description) - Tune up Procedure - B.O.M The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ____________________________ David Kay Netgear Incorporated 350 East Plumeria Drive, San Jose, California, United States 95134 SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 3.0 Netgear Incorporated Date: 2015/05/08 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID : PY3AC791L To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - User Manual - Internal Photo - External Photo - Test Setup Photo The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, __________________________________ David Kay Netgear Incorporated 350 East Plumeria Drive, San Jose, California, United States 95134

Netgear Incorporated Date:2015/07/15 From: 350 East Plumeria Drive, San Jose, California, 95134,United States To: FCC C.C SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA RE: Supersede Request Letter FCC ID: PY3AC791L We would like to remove the trade mark “Verizon” in user manual and product external photos of this certified product, FCC ID: PY3AC791L We request to supersede below exhibits due to remove the trade mark “Verizon” mentioned above, and the others remain the same. (1) User Manual (2) External Photo Please kindly let us know if you have any question. Sincerely, Client’s signature : Client’s name / title : David Kay Regulatory Compliance Manager Contact information / address: 350 East Plumeria Drive, San Jose, California, United States 95134 Company Name: Netgear Incorporated TEL: 4088903160 FAX: 4089078097 Email: [email protected] Date:2015/07/15

1 of 8 External Photos Model Number: AC791L FCC ID: PY3AC791L 2 of 8 EUT Photo 1 ) EUT Photo 2 ) WWAN Antenna WLAN Antenna2 14mm WLAN Antenna1 45mm 3 of 8 EUT Photo 3 ) EUT Photo 4 ) 4 of 8 EUT Photo 5 ) EUT Photo 6 ) 5 of 8 EUT Photo 7 ) EUT Photo 8 ) 6 of 8 EUT Photo 9 ) EUT Photo 10 ) 7 of 8 EUT Photo 11 ) EUT Photo 12 ) 8 of 8 EUT Photo 13 )

ID Label info & Label Location FCC ID : PY3AC791L BACK VIEW: INSIDE

1 of 9 Internal Photos Model Number: AC791L FCC ID: PY3AC791L 2 of 9 EUT Photo 1 ) EUT Photo 2 ) 3 of 9 EUT Photo 3 ) EUT Photo 4 ) 4 of 9 EUT Photo 5 ) EUT Photo 6 ) WWAN Antenna 5 of 9 EUT Photo 7 ) EUT Photo 8 ) WLAN Antenna2 WLAN Antenna1 6 of 9 EUT Photo 9 ) EUT Photo 10 ) 7 of 9 EUT Photo 11 ) EUT Photo 12 ) 8 of 9 EUT Photo 13 ) EUT Photo 14 ) 9 of 9 EUT Photo 15 ) EUT Photo 16 )

A Test Lab Techno Corp. Changan Lab：No. 140 -1, Changan Street, Bade City, Taoyuan County, Taiwan R.O.C. Te l：886-3-271-0188 / Fax：886-3-271-0190 SAR EVALUATION REPORT Test Report No. ： 1506FS11-02 Applicant ： Netgear Inc. Product Type ： Mobile Hot Spot Trade Name ： NETGEAR Model Number ： AC791L Date of Received ： Apr. 20, 2015 Test Period ： Apr. 23 ~ Jun. 19, 2015 Date of Issued ： Jul. 06, 2015 Test Environment ： Ambient Temperature： 22 ± 2 ° C Relative Humidity：40 - 70 % Standard ： ANSI/IEEE C95.1-1999 IEEE Std. 1528-2003 IEEE Std. 1528a-2005 47 CFR Part §2.1093; KDB 865664 D01 v01r03 / KDB 865664 D02 v01r01 KDB447498 D01 v05r02 / KDB 941225 D01 v03 KDB 941225 D05 v02r03 / KDB 941225 D06 v02 KDB 248227 D01 v02r01 Test Lab Location ： Chang-an Lab 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. The test results in the report only apply to the tested sample. Approved By ： Tested By ： (Bill Hu) (Sky Chou) Report Number: 1506FS11-02Page 1 of 444 ©2015 A Test Lab Techno Corp. Contents 1. Summary of Maximum Reported SAR Value................................................................................................. 4 2. Description of Equipment under Test (EUT).................................................................................................. 5 3. Introduction..................................................................................................................................................... 7 3.1 SAR Definition ..................................................................................................................................... 7 4. SAR Measurement Setup.............................................................................................................................. 8 4.1 DASY E-Field Probe System............................................................................................................... 9 4.1.1 E-Field Probe Specification ................................................................................................................. 9 4.1.2 E-Field Probe Calibration process .................................................................................................... 10 4.2 Data Acquisition Electronic (DAE) System ........................................................................................ 11 4.3 Robot ................................................................................................................................................. 11 4.4 Measurement Server......................................................................................................................... 11 4.5 Device Holder .................................................................................................................................... 12 4.6 Oval Flat Phantom - ELI 5.0 .............................................................................................................. 12 4.7 Data Storage and Evaluation............................................................................................................. 13 4.7.1 Data Storage ..................................................................................................................................... 13 4.7.2 Data Evaluation ................................................................................................................................. 14 5. Tissue Simulating Liquids............................................................................................................................ 16 5.1 Ingredients......................................................................................................................................... 17 5.2 Recipes.............................................................................................................................................. 17 5.3 Liquid Depth ...................................................................................................................................... 18 6. SAR Testing with RF Transmitters................................................................................................................ 19 6.1 SAR Testing with GSM/GPRS/EGPRS Transmitters ........................................................................ 19 6.2 SAR Testing with WCDMA Transmitters ........................................................................................... 19 6.3 SAR Testing with HSDPA Transmitters ............................................................................................. 19 6.4 SAR Testing with CDMA2000 Transmitters....................................................................................... 22 6.5 SAR Testing with LTE-FDD Transmitters .......................................................................................... 23 6.6 LTE Frequency range and channel bandwidth..................................................................................24 6.6.1 Maximum power reduction (MPR)..................................................................................................... 27 6.7 Power reduction ................................................................................................................................ 27 6.8 SAR Testing with 802.11 Transmitters............................................................................................... 28 6.9 Conducted P o wer ....................................................…

Text truncated - open the document above for the full version.

Appendix C - Calibration All of the instruments Calibration information are listed below. z Dipole _ D835V2 SN:4d082 Calibration No.D835V2-4d082_Jul14 z Dipole _ D1750V2 SN:1023 Calibration No.D1750V2-1023_Jun14 z Dipole _ D1900V2 SN:5d111 Calibration No.D1900V2-5d111_Jul14 z Dipole _ D2450V2 SN:712 Calibration No.D2450V2-712_Mar15 z Dipole _ D2600V2 SN:1007 Calibration No.D2600V2-1007_Sep14 z Dipole _ D5GHzV2 SN:1021 Calibration No.D5GHzV2-1021_Mar15 z Probe _ EX3DV4 SN:3847 Calibration No.EX3-3847_Jan15 z DAE _ DAE4 SN:541 Calibration No.DAE4-541_Feb15 Report Number: 1506FS11-02Page 372 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 373 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 374 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 375 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 376 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 377 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 378 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 379 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 380 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 381 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 382 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 383 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 384 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 385 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 386 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 387 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 388 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 389 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 390 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 391 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 392 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 393 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 394 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 395 of 444 ©2015 A Test Lab Techno Corp. Report Number: 1506FS11-02Page 396 of 444 ©2015 A Test Lab Techno Corp. Report Numb…

Text truncated - open the document above for the full version.