PZLM9665Land Mobile Repeater

June 30, 2002 LANGUAGE FOR APPROVAL BY EDSN. DISTANCES BELOW ARE NOMINAL AND MAY BE ADJUSTED AFTER RECEIVING SAR REPORT. FCC RF Exposure Compliance Requirements for Occupational Use Only: This Radio has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for Occupational Use/Controlled exposure environment. In addition, it complies with the following Standards and Guidelines: ◊ FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio Frequency Radiation. ◊ FCC OET Bulletin 65 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ◊ ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. ◊ ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave. 1. This radio is NOT approved for use by the general population in an uncontrolled environment. This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control its RF exposure conditions. 2. When transmitting, insure the radio antenna as 23 centimeters or more away from your head and body. 3. The radio must be used with a maximum operating duty cycle not exceeding 50%, in typical Push-to- Talk (PTT) configurations. The antenna must be mounted to maintain 23 cms from any person.

July 15, 2002 LANGUAGE FOR APPROVAL BY EDSN. DISTANCES BELOW ARE NOMINAL AND MAY BE ADJUSTED AFTER RECEIVING SAR REPORT. FCC RF Exposure Compliance Requirements for Occupational Use Only: This Radio has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for Occupational Use/Controlled exposure environment. In addition, it complies with the following Standards and Guidelines: ◊ FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio Frequency Radiation. ◊ FCC OET Bulletin 65 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ◊ ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. ◊ ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave. 1. This radio is NOT approved for use by the general population in an uncontrolled environment. This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control its RF exposure conditions. 2. When transmitting, insure the radio antenna is 33 centimeters or more away from your head and body. 3. The antenna must be mounted to maintain 3 3 centimeters from any person.

TRP/Cetecom bvba June 30, 2002 Federal Communications Commission 7435 Oakland Mills Rd Columbia, MD 21036 Re: Application Filing for FCCID:PZLMC9665CG2 Gentlemen: Gentlemen: Submitted herewith is an application for a Part 90 Land Mobile Transmitter operating in the frequency range of 440 to 490 MHz. This system is designed as a repeater to be used in conjunction with previously certified land mobile equipment manufactured by EADS. The repeater is designed to be transportable and is intended to provide a link between mobile users and a base station generally applicable in situations where communications links could not otherwise be established. The unit is designed as a "small suitcase package" and can be powered via external battery or via AC power when available. This equipment operates with a 12 kHz bandwidth and is subject to a spectral efficiency requirement. A description of the modulation characteristic discussing how the unit meets the spectral efficiency requirement has been submitted with the file together with the confirmation from the FCC that the explanation is shows the requirement is met. If there are any questions please contact me at the address above or via telephone at 410 531 3439 or email at [email protected]. Sincerely, Phillip Inglis Consultant 14085 Howard Rd Dayton, MD 21036

CONFIDENTIALITY REQUEST June 30, 2001 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Re:EADS-Defense & Security Networks application for a Part 90 base station transmitter FCC ID: PZLMC9665CG2 Gentlemen: EADS-Defense & Security Networks (EADS-DSN) herein submits an application for Equipment Authorization to be followed by submission of the necessary fees for certification of a base station transmitter under FCC Rules Part 90 as required by the FCC Rules. EADS-DSN requests, pursuant to 47CFR 0.459, post grant confidentiality for portions of the material contained in this application such that the identified material will be withheld from public inspection following the grant of this authorization. This material, as indicated by request for confidentiality of the items during the electronic submission process and further identified below, includes: 1. Circuit diagrams submitted as Equipment Authorization electronic filing attachment: Schematics Part 1 and Schematics Part 2. 2. Parts list submitted as Equipment Authorization electronic filing attachment: "Parts List". 3. Block diagram submitted as Equipment Authorization electronic filing attachment: "Block Diagram". 4. Technical description submitted as Equipment Authorization electronic filing attachment: "Operational Description -1 and Operational Description-2". 5. Technical description of spectral efficiency submitted as Equipment Authorization electronic filing attachment: "Spectrum Efficiency". 6. Users manual submitted as Equipment Authorization electronic filing attachment: Users Manual. Specifically, these exhibits contain information relating to circuit function and complexity that could be of benefit to competitors. The material contains trade secrets and confidential information that EADS-Defense & Security Networks does not customarily release to the public and which is otherwise not generally available to the public. Please contact the undersigned by telephone at 410-531-3439, by fax at 410-531-0807, by email at [email protected], or by correspondence at the address below if there are any further questions or additional information needed concerning this filing. Regards, (signed) Phillip Inglis, TRP/Cetecom b.v.b.a. 14085 Howard Rd. Dayton, MD. 21036

TRP/Cetecom bvba July 14, 2002 Federal Communications Commission 7435 Oakland Mills Rd Columbia, MD 21036 Re: Request to change the FCC ID for an application filed under FCCID:PZLMC9665CG2 Gentlemen: Submitted herewith is a request to change the referenced FCC ID to FCCID:PZLM9665. This modification reflects a change in the marketing strategy by EADS. A revised FCC ID label has been submitted to the file. EADS also requested a revision in the Manual wording regarding RF exposure. EADS wishes to ha ve the separation distance calculated without the 50% averaging interval normally associated with this equipment. A revised calculation and manual statement have been submitted to the file. All other file material continues to apply to the subject equipment. If there are any questions please contact me at the address above or via telephone at 410 531 3439 or email at [email protected]. Sincerely, Phillip Inglis Consultant 14085 Howard Rd Dayton, MD 21036

CONFIDENTIALITY REQUEST August 13, 2002 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Re:EADS-Defense & Security Networks application for a Part 90 base station transmitter FCC ID: PZLMC9665 Gentlemen: EADS-Defense & Security Networks (EADS-DSN) herein submits an application for Equipment Authorization to be followed by submission of the necessary fees for certification of a base station transmitter under FCC Rules Part 90 as required by the FCC Rules. EADS-DSN requests, pursuant to 47CFR 0.459, post grant confidentiality for portions of the material contained in this application such that the identified material will be withheld from public inspection following the grant of this authorization. This material, as indicated by request for confidentiality of the items during the electronic submission process and further identified below, includes: 1. Circuit diagrams submitted as Equipment Authorization electronic filing attachment: Schematics Part 1 and Schematics Part 2. 2. Parts list submitted as Equipment Authorization electronic filing attachment: "Parts List". 3. Block diagram submitted as Equipment Authorization electronic filing attachment: "Block Diagram". 4. Technical description submitted as Equipment Authorization electronic filing attachment: "Operational Description -1 and Operational Description-2". 5. Technical description of spectral efficiency submitted as Equipment Authorization electronic filing attachment: "Spectrum Efficiency". Specifically, these exhibits contain information relating to circuit function and complexity that could be of benefit to competitors. The material contains trade secrets and confidential information that EADS-Defense & Security Networks does not customarily release to the public and which is otherwise not generally available to the public. Please contact the undersigned by telephone at 410-531-3439, by fax at 410-531-0807, by email at [email protected], or by correspondence at the address below if there are any further questions or additional information needed concerning this filing. Regards, (signed) Phillip Inglis, TRP/Cetecom b.v.b.a. 14085 Howard Rd. Dayton, MD. 21036

CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 87 (135) Test site CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 88 (135) Test site CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 89 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 90 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 91 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 92 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 93 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 94 (135) Photographs of the equipment IDR G2 M9665 C G2

FCC ID: PZLM C 96 65CG2 55 mm 18 mm

FCC ID: PZLM9665CG2

FCC ID: PZLM96 65 55 mm 18 mm

CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 95 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 96 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 97 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 98 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 99 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 100 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 101 (135) Photographs of the equipment IDR G2 M9665 C G2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 102 (135) Photographs of the equipment IDR G2 M9665 C G2 AC_DC Filter CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 103 (135) Photographs of the equipment IDR G2 M9665 C G2 AC_DC_Filter_connectors CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 104 (135) Photographs of the equipment IDR G2 M9665 C G2 Circulator CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 105 (135) Photographs of the equipment IDR G2 M9665 C G2 Circulator_label ID CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 106 (135) Photographs of the equipment IDR G2 M9665 C G2 HU01_Duplexer CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 107 (135) Photographs of the equipment IDR G2 M9665 C G2 HU01_Duplexer_Label ID CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 108 (135) Photographs of the equipment IDR G2 M9665 C G2 LNA_external view CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 109 (135) Photographs of the equipment IDR G2 M9665 C G2 LNA_Board CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 110 (135) Photographs of the equipment IDR G2 M9665 C G2 LNA_Label ID CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 111 (135) Photographs of the equipment IDR G2 M9665 C G2 MU07_Duplexer CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 112 (135) Photographs of the equipment IDR G2 M9665 C G2 MU07_Duplexer_Label ID CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 113 (135) Photographs of the equipment IDR G2 M9665 C G2 PA_External View_2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 114 (135) Photographs of the equipment IDR G2 M9665 C G2 PA_External View_1 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 115 (135) Photographs of the equipment IDR G2 M9665 C G2 PA_external View_label ID CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 116 (135) Photographs of the equipment IDR G2 M9665 C G2 PA_control Board CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 117 (135) Photographs of the equipment IDR G2 M9665 C G2 PA_Control Board_Label ID CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 118 (135) Photographs of the equipment IDR G2 M9665 C G2 PA_Radio Board CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 119 (135) Photographs of the equipment IDR G2 M9665 C G2 PA_radio Board_Left part CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 120 (135) Photographs of the equipment IDR G2 M9665 C G2 PA_Radio Board_right part CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 121 (135) Photographs of the equipment IDR G2 M9665 C G2 Power supply CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 122 (135) Photographs of the equipment IDR G2 M9665 C G2 Power_supply_Label ID CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 123 (135) Photographs of the equipment IDR G2 M9665 C G2 TRx_external View_3 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 124 (135) Photographs of the equipment IDR G2 M9665 C G2 TRx Board_Top view_2 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 125 (135) Photographs of the equipment IDR G2 M9665 C G2 TRx Board_Top view_1 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 126 (135) Photographs of the equipment IDR G2 M9665 C G2 TRx Board_down View CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 127 (135) Photographs of the equipment IDR G2 M9665 C G2 Data processing_ Right Part_Top side CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 128 (135) Photographs of the equipment IDR G2 M9665 C G2 Data processing_Left Part_down side CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 129 (135) Photographs of the equipment IDR G2 M9665 C G2 Data processing_Left Part_top side CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 130 (135) Photographs of the equipment IDR G2 M9665 C G2 Data processing_right Part_down side CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 131 (135) Photographs of the equipment IDR G2 M9665 C G2 TRx_Label. ID CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 132 (135) Photographs of the equip…

Text truncated - open the document above for the full version.

July 15, 2002 LANGUAGE FOR APPROVAL BY EDSN. DISTANCES BELOW ARE NOMINAL AND MAY BE ADJUSTED AFTER RECEIVING SAR REPORT. FCC RF Exposure Compliance Requirements for Occupational Use Only: This Radio has been evaluated and found to comply with the Federal Communications Commission (FCC) RF exposure limits for Occupational Use/Controlled exposure environment. In addition, it complies with the following Standards and Guidelines: ◊ FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio Frequency Radiation. ◊ FCC OET Bulletin 65 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ◊ ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. ◊ ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave. 1. This radio is NOT approved for use by the general population in an uncontrolled environment. This radio is restricted to occupational use, work related operations only where the radio operator must have the knowledge to control its RF exposure conditions. 2. When transmitting, insure the radio antenna is 33 centimeters or more away from your head and body. 3. The antenna must be mounted to maintain 3 3 centimeters from any person.

RF exposure instructions Pursuant to Title 47 CFR Part 2 of the FCC Rules and Regulations, this equipment is subject to the radio frequency radiation exposure requirements specified in Section 2.1091 or 2.1093, as appropriate. The EADS repeater is intended to be located such that it will relay messages from a mobile unit located in an area that would otherwise be unserved due to lack of coverage by the base station. EADS certifies that it has determined that the configuration meets the RF hazard requirements applicable to this equipment, as specified in Section 1.1310, operating under the authority of 47 CFR Part 90 of the FCC Rules and Regulations. This determination is dependent upon installation, operation and use of the equipment in accordance with all instructions provided. The EADS system is defined by the FCC Rules as a mobile device which according to FCC definitions means that the device is designed to be used in other than fixed locations and generally in such a way that a separation distance of at least 20 cm (8 inches) is normally maintained between the transmitter's antenna and the body of the user or nearby persons. It is designed for use by knowledgeable individuals in an occupational/controlled environment. Pursuant to Section 1.1310, the applicable MPE limit is f/300 or 1.46 mW/cm 2 . The following calculations show the determination of compliance with the FCC Rules. The power output of the unit is 19.3 watts. The manufacturer specifies an omnidirectional rod antenna shall be used with 0 dBi gain. MPE calculated energy level: Using 19.3 Watts EIRP, 33 cm separation distance, the calculated power density computed by dividing the EIRP by the surface area of a sphere of 33 cm radius is 1.41 mW/cm 2 . This level is below the compliance level for occupational controlled exposure requirements. The unit is provided with a 7.5 meter antenna cable and is provided with instructions to locate the antenna such that at least 33 cm separation distance will be maintained by any individuals that may be in the vicinity of the repeater. Based on the above, EADS certifies that the FCC requirements for mobile MPE limits for RF Exposure are met by their product.

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6-10 . D-66117 SaarbrückenTelefon: +49 (0)681 598-9100Telefax: -9075 RSC11issue test report consist of 135 PagesPage 1 (135) TTI-P-G166/98 Accredited Bluetooth™ Test Facility (BQTF) Test report no.: 5_3928-01-05/02 FCC Part 2, 15, 90 FCCID:M9665CG2 CETECOM – ICT Services GmbH Untertürkheimerstr. 6-10 66117 Saarbrücken, Germany Telephone: + 49 (0) 681 / 598-0 Fax: + 49 (0) 681 / 9075 BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue date: 2002-05-17Page 2 (135) Table of Contents 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of applicant 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test report 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. 1.2Testing laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 - 10 66117 Saarbrücken Germany Telefone: + 49 681 598 - 9100 Telefax : + 49 681 598 - 9075 E-mail: [email protected] Internet: www.cetecom.de Accredited testing laboratory: The Test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025. DAR registration number: TTI-P-G-166/98 Accredited Bluetooth™ Test Facility (BQTF) BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue date: 2002-05-17Page 3 (135) 1.3Details of applicant Name : EADS Defence and Security Networks Street : Rue J.P Timbaud-MS01, BP 26 City : F 78392 Bois d’Arcy Cedex Country : France Telephone : +33 1 34 60 88 94 Telefax : +33 1 34 60 78 98 Contact : Yann Lebail Telephone : +33 1 34 60 88 94 1.4Application details Date of receipt of application : 2002-04-10 Date of receipt of test item : 2002-05-15 Date of test : 2002-05-15 1.5Test item Type of equipment : Independant Digital Repeater IDR G2 M9665 C G2 Type designation: RB1756BD/HR6005BDA02 with HR6106F (HU01) or HR6106R (MU07) Duplexer Manufacturer: applicant Street: City: Country: Serial number: HR6005 BDA02 021100160 with Duplexer HU01 HR6106FAA02 021000738or Duplexer MU07 HR6106RAA02 029 Additional informations: : Frequency: 440 - 490 MHz Type of modulation: 12K0F1D Number of channels : 4000 Antenna: PK1429A Power supply: 13.2 V DC vehicle battery or AC 115V power supply Output power: 15.0 W Type of equipment: HR6005BDA02 with soft version RRIU310208 Temperature range : -30°C - +60°C Serial Number of each subpart : Mechanical Part HR6005BDA02 021100160 Power supply HR5884CAA02 021000285 Power amplifier HR6084BAA04 02090048 TransceiverHR5873BAD05 020600344 UGR Board HR6014AAB02 020800027 Circulator HR6105BAA02 02021000737 Low Noise Amplifier HR6006BBA01 014800004 Duplexer HU01 HR6106FAA02 021000738 Duplexer MU07HR6106RAA02 029 1.6Test standards: FCC Part 2, 15, 90 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue date: 2002-05-17Page 4 (135) 2 Technical test Rx: The radiated measurements were performed vertical and horizontal over the whole frequency range. We start at 1 m high with vertical receiving antenna and rotate the dish continuously. During rotation we use the antenna lift system to vary the hight from 1 to 4 m. So thus we find maximum radiation output. At this points we do manual remeasurements. After this we do the same measurements in horizontal position of the receiving antenna. This (horizontal and vertical) is made for all the three planes of the test sample. We use the maximum received results. The detector function and selection of bandwidth are according ANSI C63.2-1996 item 8.2.1 and ANSI C63.4-1992 Item 4.2. Antennas are conform with ANSI C63.2-1996 item 15. 150 kHz - 30 MHz: Quasi Peak measurement, 9kHz Bandwidth, passive loop antenna. 30 MHz - 200 MHz: Quasi Peak measurement, 120KHz Bandwidth, biconical antenna 200MHz - 1GHz: Quasi Peak measurement, 120KHz Bandwidth, log periodic antenna 1GHz: Average, RBW 1MHz, VBW 10 MHz, wave guide horn Tx: All measurements was done based on ANSI C63.4. 2.1Summary of test results No deviations from the technical specification(s) were ascertained in the course of the tests performed. Final verdict : PASS Technical responsibility for area of testing : 29.05.02RSC 8411 Berg M. DateSectionNameSignature Technical responsibility for area of testing : 29.05.02RSC8414Ames H. DateSectionNameSignature CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue date: 2002-05-17Page 5 (135) 2.2Testreport TEST REPORT Test report no. : 5_3928-01-05/02 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue date: 2002-05-17Page 6 (135) TEST REPORT REFERENCE LIST OF MEASUREMENTS PARAMETER TO BE MEASUREDPAGE RF Power Vs. DC Power InputSUBCLAUSE § 2.9937 OCCUPIED BANDWIDTH§2.9898 MAXIMUM PEAK OUTPUT POWER SUBCLAUSE § 2.104616 CONDUCTED SPURIOUS EMISSIONS§ 2.99125 CONDUCTED SPURIOUS EMISSIONS§ 2.99126 RADIATED SPURIOUS EMISSION§2.99334 FREQUENCY STABILITY Vs. TEMPERATURE § 2.99551 FREQUENCY STABILITY Vs. VOLTAGE § 2.99153 TRANSIENT FREQUENCY BEHAVIOR §90.21457 RECEIVER SPURIOUS RADIATION conducted § 15.21160 RECEIVER SPURIOUS EMISSIONS) § 15.20965 Conducted emissions§ 15.107/20782 TEST EQUIPMENT AND ANCILLARIES USED FOR TESTS84 Photographs of the equipment86 CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 7 (135) Equipment under test : IDR G2 M9665 C G2 Ambient temperature : 23° °° °C Relative humidity : 40% REFE…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report no.: 5_3928-01-05/02Issue Date: 2002-05-17Page 86 (135) Photographs of the equipment Test site