PZWBHT1100Barcode Handy Terminal

496487-6550 ＢＨＴ-11００ Series Operator's Guide 조작 가이드 操作手冊 Barcode Handy Terminal BHT-1170BWB BHT-1171BWB BHT-1172BWB Thank you for using the DENSO WAVE Barcode Handy Terminal. Please read this manual thoroughly prior to operation to ensure full use of the product’s functionality, and store safely in a convenient location for quick reference even after reading. This manual contains only the basic details required for operation. Please refer to the User’s Manual for further details on general operation. The User’s Manual can be downloaded free of charge from the DENSO WAVE Web site (QBdirect). http://www.qbdirect.net/ DENSO WAVE의 Barcode Handy Terminal을 사용해 주심에 감사드립니다. 본제품의 기능을 충분히 이용하기 위하여 조작 전 본서 읽어주시길 바랍니다. 또한, 필요한 때는 언제든지 참조할 수 있도록 잘 보관바랍니다. 본서에는 조작에 필요한 기본적인 내용만을 기재하고 있습니다. 조작 전반에 관한 상세한 내용은 취급설명서를 참조바랍니다. 취급설명서는 당사 홈페이지 QBdirect(회원 등록제：이용 무료)로부터 무상으로 다운로드 가능합니다 感谢您购买DENSO WAVE 的Barcode Handy Terminal 掌上型扫码器。 为了充分运用本产品的功能，操作前请仔细阅读本手册。并且，在阅读之后，还望妥善 保管本手册，以便随时参考。本手册仅介绍必要的基础操作知识。有关操作详情，请参考User's Manual。 User's Manual 可从本公司主页QBdirect（会员注册制：免费使用）免费下载。 Some of the pixels on the LCD touch screen may not illuminate or stay permanently illuminated. Furthermore, there may also be inconsistencies in color and brightness. None of these aspects represent an LCD defect. A thin Newton's ring (rainbow-like patterns) may appear on the touch panel. This does not necessarily indicate a problem with the touch panel. About This Manual • Due to changes and improvements, the content of this manual may be subject to change without prior notice. • The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent. • Please contact DENSO WAVE if this manual is lost. • Every attempt has been made to ensure that the content of this manual is thorough and up to date, however, we kindly ask you to report any questionable descriptions, mistakes or omissions, if any, to DENSO WAVE. Liability Limitations • DENSO WAVE INCORPORATED ("DENSO WAVE") does not assume any product liability (including damages for lost profits, interruption of operations, or the loss of business-related information) arising out of, or in connection with, the use of, or inability to use the BHT system software or related manuals. • DENSO WAVE takes reasonable precautions to ensure its products do not infringe upon any patents or other intellectual property rights of other(s), however, DENSO WAVE cannot be responsible for any patent or other intellectual property right infringement(s) or violation(s) arising from any of the following. (1) The use of DENSO WAVE’s products in connection or in combination with other components, products, devices, data processing systems or software not supplied by DENSO WAVE. (2) The use of DENSO WAVE’s products in a manner for which they were not intended nor designed. (3) The modification of DENSO WAVE’s products by parties other than DENSO WAVE. • If it is judged by DENSO WAVE that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the warranty period. Customer Registration To allow us to provide our customers with comprehensive service and support, we request that all customers complete a Member Registration Form. Registered members will be offered the following privileges. • The latest upgrade information • Free exhibition and event information for new products • Free web-information service “QBdirect.” QBdirect Service Contents Information searching service (FAQ) Offers detailed information on each product. Download service The latest OS systems for the BHT Series, repair software, and sample programs can be downloaded. E-mail inquiries Product related queries can be sent in by e-mail. * Please note that these privileges may be subject to change without prior notice. How to Register Access the URL below and follow the instructions provided. http://www.qbdirect.net/ Usage Precautions Usage environment restrictions • Do not use the BHT where it may be exposed to fire, high temperatures, or direct sunlight. (Failure to observe this may result in damage, overheating, explosion, or fire.) * When the BHT is stored in a high-temperature, high-humidity environment of 50 to 60°C, leave to sit in a location at room temperature and normal humidity for at least 1 day prior to use. Failure to observe this may cause a reading failure or damage the BHT. • Do not use the BHT in places with extreme temperature variations. (Failure to observe this may lead to BHT malfunction due to condensation.) * Leave the BHT for a short while prior to use when moved from a cold to a warm environment. • Do not use the BHT in places where it may be exposed to strong impact or significant static electricity. Keep the BHT away from electromagnetic waves and metallic objects. Wireless communication may not be possible in the following locations. • In the vicinity of the following devices operating on a 2.4GHz waveband (Communication may not be possible due to electromagnetic interference.) • Industrial, scientific, or medical equipment such as microwave ovens • Wireless LAN devices • Logistics systems in places such as plants or warehouses • Wireless devices such as personal or amateur radio stations • In the vicinity of household appliances emitting electromagnetic waves such as computers or televisions (Communication may not be possible due to electromagnetic noise.) • In the vicinity of metallic objects, in places with high levels of metallic dust, or in places surrounded my metal walls (Communication may not be possible due to the presence of metallic objects.) SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Meaning of Symbols Alerts you to those conditions which could cause serious bodily injury or death if the instructions are not followed correctly. Alerts you to those conditions which could cause minor bodily injury or substantial property damage if the instructions are not fo…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Model: BHT-1170BWB-CE Page 2 Model: BHT-1172BWB-CE Page 3 Model: BHT-1171BWB-CE Page 4

Information for model BCG certification Rated Nameplate 2/2 Certification Label The certification number is example.

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18

FCC ID: PZWBHT1100 Report No.: RF120109C19 Operational Description This device is a Hand Held Terminal, which operates in 2.4GHz bands for WLAN and Bluetooth; the maximum data rate could be up to 65Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 65Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by DC 3.7V from batteries. The antenna is Printed PCB without antenna connectors. The other instruction, please have a look at the users manual.

FCC SAR Test Report Report Format Version 4.1.0 Page No. : 1 of 22 Report No. : SA110801C10A Reference No.: 120109C19 Issued Date : Feb. 01, 2012 Revision : R01 FCC SAR Test Report Report No. : SA110801C10A Applicant : DENSO WAVE INCORPORATED Address : 1 Yoshiike Kusagi Agui-cho,Chita-gun Aichi 470-2297, Japan Product : Barcode Handy Terminal FCC ID : PZWBHT1100 Brand : DENSO Model No. : BHT-1170BWB-CE, BHT-1171BWB-CE, BHT-1172BWB-CE Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) KDB 248227 D01 v01r02 Date of Testing : Jan. 14, 2012 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. This test report consists of 22 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Prepared By : Andrea Hsia / Specialist Approved By : Roy Wu / Manager FCC SAR Test Report Report Format Version 4.1.0 Page No. : 2 of 22 Report No. : SA110801C10A Reference No.: 120109C19 Issued Date : Feb. 01, 2012 Revision : R01 Table of Contents Release Control Record............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR)................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder................................................................................................................................................... 10 3.2.6 System Validation Dipoles................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................... 14 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 14 3.4.2 Volume Scan Procedure................................................................................................................................... 14 3.4.3 Power Drift Monitoring...................................................................................................................................... 14 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 15 3.4.5 SAR Averaged Methods................................................................................................................................... 15 4. SAR Measurement Evaluation ............................................................................................................................................ 16 4.1 EUT Configuration and Setting................................................................................................................................... 16 4.2 EUT Testing Position .................................................................................................................................................. 16 4.3 Tissue Verification ...................................................................................................................................................... 18 4.4 System Verification..................................................................................................................................................... 18 4.5 Conducted Power Results................…

Text truncated - open the document above for the full version.

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/01/14 System Check_H2450_120114 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 716 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450_0114 Medium parameters used: f = 2450 MHz; σ = 1.85 mho/m; ε r = 39.3; ρ = 1000 kg/m 3 Ambient Temperature：21.6 °C; Liquid Temperature：20.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.73, 7.73, 7.73); Calibrated: 2011/02/25 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 22.2 mW/g Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 109.5 V/m; Power Drift = -0.005 dB Peak SAR (extrapolated) = 29.3 W/kg SAR(1 g) = 13.7 mW/g; SAR(10 g) = 6.2 mW/g Maximum value of SAR (measured) = 21.2 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/01/14 System Check_B2450_120114 DUT: Dipole 2450 MHz; Type: D2450V2; SN: 716 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: B2450_0114 Medium parameters used: f = 2450 MHz; σ = 1.93 mho/m; ε r = 52.5; ρ = 1000 kg/m 3 Ambient Temperature：21.6 °C; Liquid Temperature：20.5 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.91, 7.91, 7.91); Calibrated: 2011/02/25 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1039 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 20.3 mW/g Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 102.4 V/m; Power Drift = -0.014 dB Peak SAR (extrapolated) = 26.4 W/kg SAR(1 g) = 13 mW/g; SAR(10 g) = 5.99 mW/g Maximum value of SAR (measured) = 19.1 mW/g

Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/01/14 P01 802.11b_Right Cheek_Ch11_BHT-1171BWB-CE_Battery1_Cover1 DUT: 120109C19 Communication System: 802.11b; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium: H2450_0114 Medium parameters used: f = 2462 MHz; σ = 1.86 mho/m; ε r = 39.2; ρ = 1000 kg/m 3 Ambient Temperature：21.5 °C; Liquid Temperature：20.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.73, 7.73, 7.73); Calibrated: 2011/02/25 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch11/Area Scan (51x131x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.250 mW/g Ch11/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.76 V/m; Power Drift = 0.144 dB Peak SAR (extrapolated) = 0.340 W/kg SAR(1 g) = 0.181 mW/g; SAR(10 g) = 0.095 mW/g Maximum value of SAR (measured) = 0.242 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/01/14 P02 802.11b_Right Cheek_Ch11_BHT-1171BWB-CE_Battery2_Cover2 DUT: 120109C19 Communication System: 802.11b; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium: H2450_0114 Medium parameters used: f = 2462 MHz; σ = 1.86 mho/m; ε r = 39.2; ρ = 1000 kg/m 3 Ambient Temperature：21.5 °C; Liquid Temperature：20.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.73, 7.73, 7.73); Calibrated: 2011/02/25 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch11/Area Scan (51x131x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.238 mW/g Ch11/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.94 V/m; Power Drift = 0.063 dB Peak SAR (extrapolated) = 0.288 W/kg SAR(1 g) = 0.159 mW/g; SAR(10 g) = 0.087 mW/g Maximum value of SAR (measured) = 0.217 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/01/14 P03 802.11b_Right Tilted_Ch11_BHT-1171BWB-CE_Battery1_Cover1 DUT: 120109C19 Communication System: 802.11b; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium: H2450_0114 Medium parameters used: f = 2462 MHz; σ = 1.86 mho/m; ε r = 39.2; ρ = 1000 kg/m 3 Ambient Temperature：21.5 °C; Liquid Temperature：20.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.73, 7.73, 7.73); Calibrated: 2011/02/25 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch11/Area Scan (51x131x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.196 mW/g Ch11/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.39 V/m; Power Drift = 0.035 dB Peak SAR (extrapolated) = 0.223 W/kg SAR(1 g) = 0.117 mW/g; SAR(10 g) = 0.065 mW/g Maximum value of SAR (measured) = 0.165 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/01/14 P04 802.11b_Left Cheek_Ch11_BHT-1171BWB-CE_Battery1_Cover1 DUT: 120109C19 Communication System: 802.11b; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium: H2450_0114 Medium parameters used: f = 2462 MHz; σ = 1.86 mho/m; ε r = 39.2; ρ = 1000 kg/m 3 Ambient Temperature：21.4 °C; Liquid Temperature：20.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.73, 7.73, 7.73); Calibrated: 2011/02/25 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch11/Area Scan (51x131x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.162 mW/g Ch11/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.23 V/m; Power Drift = 0.074 dB Peak SAR (extrapolated) = 0.357 W/kg SAR(1 g) = 0.120 mW/g; SAR(10 g) = 0.060 mW/g Maximum value of SAR (measured) = 0.164 mW/g Ch11/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.23 V/m; Power Drift = 0.074 dB Peak SAR (extrapolated) = 0.206 W/kg SAR(1 g) = 0.113 mW/g; SAR(10 g) = 0.062 mW/g Maximum value of SAR (measured) = 0.155 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/01/14 P05 802.11b_Left Tilted_Ch11_BHT-1171BWB-CE_Battery1_Cover1 DUT: 120109C19 Communication System: 802.11b; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium: H2450_0114 Medium parameters used: f = 2462 MHz; σ = 1.86 mho/m; ε r = 39.2; ρ = 1000 kg/m 3 Ambient Temperature：21.4 °C; Liquid Temperature：20.4 °C DASY4 Configuration: - Probe: EX3DV4 - SN3590; ConvF(7.73, 7.73, 7.73); Calibrated: 2011/02/25 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn861; Calibrated: 2011/08/29 - Phantom: SAM Phantom_Front; Type: SAM V4.0; Serial: TP 1654 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch11/Area Scan (51x131x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.225 mW/g Ch11/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 8.72 V/m; Power Drift = 0.185 dB Peak SAR (extrapolated) = 0.238 W/kg SAR(1 g) = 0.135 mW/g; SAR(10 g) = 0.071 mW/g Maximum value of SAR (measured) = 0.181 mW/g Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2012/01/14 P06 802.11b_Right Cheek_Ch11_BHT-1170BWB-CE_Battery1_Cover1 DUT: 120109C19 Communication System: 802.11b; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium: H2450_0114 Medium parameters used: f = 2462 MHz; σ = 1.86 mho/m; ε r = 39.2; ρ = 1000 kg/m 3 Ambient Temperature：21.5 °C; Liquid Temperature：20.4 …

Text truncated - open the document above for the full version.

Report No.: RF110801C10A-1 1 Report Format Version 4.1.0 Reference No.: 120109C19 FCC TEST REPORT (Bluetooth) REPORT NO.: RF110801C10A-1 MODEL NO.: BHT-1170BWB-CE (refer to item 3.1 for more details) FCC ID: PZWBHT1100 RECEIVED: Jan. 09, 2012 TESTED: Jan. 11 ~ Jan. 18, 2012 ISSUED: Jan. 20, 2012 APPLICANT: DENSO WAVE INCORPORATED ADDRESS: 1 Yoshiike Kusagi Agui-cho, Chita-gun Aichi 470-2297, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 53 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110801C10A-1 2 Report Format Version 4.1.0 Reference No.: 120109C19 TABLE OF CONTENTS RELEASE CONTROL RECORD...............................................................................................4 1. CERTIFICATION ...........................................................................................................5 2. SUMMARY OF TEST RESULTS ...................................................................................6 2.1 MEASUREMENT UNCERTAINTY ................................................................................6 3. GENERAL INFORMATION............................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ..............................................................................7 3.2 DESCRIPTION OF TEST MODES ................................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................8 3.2.2 DESCRIPTION OF SUPPORT UNITS ..........................................................................8 3.2.3 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................10 4. TEST TYPES AND RESULTS ..................................................................................... 11 4.1 RADIATED EMISSION MEASUREMENT ................................................................... 11 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................. 11 4.1.2 TEST INSTRUMENTS.................................................................................................12 4.1.3 TEST PROCEDURES .................................................................................................13 4.1.4 DEVIATION FROM TEST STANDARD .......................................................................13 4.1.5 TEST SETUP...............................................................................................................14 4.1.6 EUT OPERATING CONDITIONS ................................................................................14 4.1.7 TEST RESULTS ..........................................................................................................15 4.2 NUMBER OF HOPPING FREQUENCY USED ...........................................................22 4.2.1 LIMIT OF HOPPING FREQUENCY USED..................................................................22 4.2.2 TEST SETUP...............................................................................................................22 4.2.3 TEST INSTRUMENTS.................................................................................................22 4.2.4 TEST PROCEDURES .................................................................................................22 4.2.5 DEVIATION FROM TEST STANDARD .......................................................................22 4.2.6 TEST RESULTS ..........................................................................................................22 4.3 DWELL TIME ON EACH CHANNEL ...........................................................................25 4.3.1 LIMIT OF DWELL TIME USED ....................................................................................25 4.3.2 TEST SETUP...............................................................................................................25 4.3.3 TEST INSTRUMENTS.................................................................................................25 4.3.4 TEST PROCEDURES .................................................................................................25 4.3.5 DEVIATION FROM TEST STANDARD .......................................................................25 4.3.6 TEST RESULTS ..........................................................................................................26 4.4 CHANNEL BANDWIDTH .............................................................................................34 4.4.1 LIMITS OF CHANNEL BANDWIDTH ..........................................................................34 4.4.2 TEST SETUP...............................................................................................................34 4.4.3 TEST INSTRUMENTS.................................................................................................34 4.4.4 TEST PROCEDURE....................................................................................................34 4.4.5 DEVIATION FROM TEST STANDARD .......................................................................34 4.4.6 EUT OPERATING CONDITION ..................................................................................34 4.4.7 TEST RESULTS .....................................................................…

Text truncated - open the document above for the full version.

Report No.: RF110801C10A 1 Report Format Version 4.1.0 Reference No.: 120109C19 FCC TEST REPORT REPORT NO.: RF110801C10A MODEL NO.: BHT-1170BWB-CE (refer to item 3.1 for more details) FCC ID: PZWBHT1100 RECEIVED: Jan. 09, 2012 TESTED: Jan. 11 ~ Jan. 18, 2012 ISSUED: Jan. 20, 2012 APPLICANT: DENSO WAVE INCORPORATED ADDRESS: 1 Yoshiike Kusagi Agui-cho, Chita-gun Aichi 470-2297, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 38 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110801C10A 2 Report Format Version 4.1.0 Reference No.: 120109C19 TABLE OF CONTENTS RELEASE CONTROL RECORD...............................................................................................4 1. CERTIFICATION ...........................................................................................................5 2. SUMMARY OF TEST RESULTS ...................................................................................6 2.1 MEASUREMENT UNCERTAINTY..................................................................................6 3. GENERAL INFORMATION............................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ..............................................................................7 3.2 DESCRIPTION OF TEST MODES ................................................................................8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ...........................................................8 3.2.2 DESCRIPTION OF SUPPORT UNITS ..........................................................................8 3.2.3 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .............................................10 4. TEST TYPES AND RESULTS ..................................................................................... 11 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT...................................... 11 4.1.1 LIMITS OF RADIATED AND BANDEDGE EMISSION MEASUREMENT ................... 11 4.1.2 TEST INSTRUMENTS.................................................................................................12 4.1.3 TEST PROCEDURES .................................................................................................13 4.1.4 DEVIATION FROM TEST STANDARD ........................................…

Text truncated - open the document above for the full version.