PZWBHT300WBScanner with Bluetooth and 802.11 transmitters

2 „ DENSO WAVE INCORPORATED does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. „ If it is judged by DENSO WAVE INCORPORATED that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the warranty period. „ Intellectual Property Precaution DENSO WAVE INCORPORATED ("DENSO WAVE") takes reasonable precautions to ensure its products do not infringe upon any patent of other intellectual property rights of other(s), but DENSO WAVE cannot be responsible for any patent or other intellectual property right infringement(s) or violation(s) which arise from (i) the use of DENSO WAVE's product(s) in connection or in combination with other component(s), product(s), data processing system(s) or equipment or software not supplied from DENSO WAVE; (ii) the use of DENSO WAVE's products in a manner for which the same were not intended nor designed; or (iii) any modification of DENSO WAVE's products by other(s) than DENSO WAVE. Bluetooth ® is a trademark owned by its proprietor. DENSO WAVE uses Bluetooth ® wireless technology under license. Related Publications BHT-300BWB User’s Manual (Contained in the Manual Pack CD. Download available at our URL printed on the back cover of this operator’s guide.) Instructions for using the handy terminal (BHT-300BWB) and optical communication unit (CU-300). BHT-BASIC Programmer’s Manual (BHT-300 series) (Contained in the BHT-BASIC Compiler CD and Manual Pack CD) Description for developing application programs of the handy terminal in BHT-BASIC. BHT-BASIC 4.0 Transfer Utility Guide (that comes with BHT-BASIC 4.0 Transfer Utility) Description about software that transmits data and programs between the handy terminal and computer. 3 Related Publications BHT-300BWB User's Manual (Contained in the Manual Pack CD. Download available at our URL printed on the back cover of this operator's guide.) Instructions for using the handy terminal (BHT-300BWB) and optical communication unit (CU-300). BHT-BASIC Programmer's Manual (BHT-300 series) (Contained in the BHT-BASIC Compiler CD and Manual Pack CD) Description for developing application programs of the handy terminal in BHT-BASIC. BHT-BASIC 4.0 Transfer Utility Guide (that comes with BHT-BASIC 4.0 Transfer Utility) Description about software that transmits data and programs between the handy terminal and computer. 4 Contents SAFETY PRECAUTIONS...........................................................................................................5 Components and Functions........................................................................................................9 Reading 2D Codes and Bar Codes..........................................................................................11 Using Radio Link and Bluetooth ® Wireless Communication Link.............................................13 Using Infrared Link....................................................................................................................14 Setting the Backlight.................................................................................................................15 Adjusting the LCD Contrast & Beeper Volume and Switching the Beeper & Vibrator..............16 Displaying the Battery Voltage Level........................................................................................17 Loading the Battery Cartridge...................................................................................................18 Battery Replacement Notes......................................................................................................19 BHT Turning-off Notes..............................................................................................................20 Error Messages........................................................................................................................21 Proper Care of the BHT............................................................................................................26 Handling Notes.........................................................................................................................27 US and Canada Regulations....................................................................................................28 Labeling....................................................................................................................................29 Customer Registration Form.....................................................................................................30 5 SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Strict observance of these warnings and cautions is a MUST for preventing accidents that could result in bodily injury and substantial property damage. Make sure you fully understand all definitions of these terms and symbols given below before you proceed to the text itself. Alerts you to those conditions that could cause serious bodily injury or death if the instructions are not followed correctly. Alerts you to those conditions that could cause minor bodily injury or substantial property damage if the instructions are not followed correctly. Meaning of Symbols A triangle () with a picture inside alerts you to a warning of danger. Here you see the warning for electrical shock. A diagonal line through a circle () warns you of something you should not do; it may or may not have a picture inside. Here you see a screwdriver inside the circle, meaning that you should not disassemble. A black circle () with a picture inside alerts you to something you MUST do. This example shows that you MUST unplug the power cord. 6 To System Designers: • When introducing BHTs in those systems that could affect human lives (e.g., medicines management system), develop applications carefully through redundancy and safe…

Text truncated - open the document above for the full version.

2 „ DENSO WAVE INCORPORATED does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. „ If it is judged by DENSO WAVE INCORPORATED that malfunction of the product is due to the product having been dropped or subjected to impact, repairs will be made at a reasonable charge even within the warranty period. „ Intellectual Property Precaution DENSO WAVE INCORPORATED ("DENSO WAVE") takes reasonable precautions to ensure its products do not infringe upon any patent of other intellectual property rights of other(s), but DENSO WAVE cannot be responsible for any patent or other intellectual property right infringement(s) or violation(s) which arise from (i) the use of DENSO WAVE's product(s) in connection or in combination with other component(s), product(s), data processing system(s) or equipment or software not supplied from DENSO WAVE; (ii) the use of DENSO WAVE's products in a manner for which the same were not intended nor designed; or (iii) any modification of DENSO WAVE's products by other(s) than DENSO WAVE. Bluetooth ® is a trademark owned by its proprietor. DENSO WAVE uses Bluetooth ® wireless technology under license. The shape of the projected area marker differs according to the original target market. This hand-held scanner with built-in area marker (five-point) is designed for use in the United States and Canada only and should not be used in any other country. 3 Related Publications BHT-300QWB User's Manual (Contained in the Manual Pack CD. Download available at our URL printed on the back cover of this operator's guide.) Instructions for using the handy terminal (BHT-300QWB) and optical communication unit (CU-300). BHT-BASIC Programmer's Manual (BHT-300 series) (Contained in the BHT-BASIC Compiler CD and Manual Pack CD) Description for developing application programs of the handy terminal in BHT-BASIC. BHT-BASIC 4.0 Transfer Utility Guide (that comes with BHT-BASIC 4.0 Transfer Utility) Description about software that transmits data and programs between the handy terminal and computer. 4 Contents SAFETY PRECAUTIONS...........................................................................................................5 Components and Functions........................................................................................................9 Reading 2D Codes and Bar Codes..........................................................................................11 Using Radio Link and Bluetooth ® Wireless Communication Link.............................................13 Using Infrared Link....................................................................................................................14 Setting the Backlight.................................................................................................................15 Adjusting the LCD Contrast & Beeper Volume and Switching the Beeper & Vibrator..............16 Displaying the Battery Voltage Level........................................................................................17 Loading the Battery Cartridge...................................................................................................18 Battery Replacement Notes......................................................................................................19 BHT Turning-off Notes..............................................................................................................20 Error Messages........................................................................................................................21 Proper Care of the BHT............................................................................................................26 Handling Notes.........................................................................................................................27 US and Canada Regulations....................................................................................................28 Labeling....................................................................................................................................29 Customer Registration Form.....................................................................................................30 5 SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Strict observance of these warnings and cautions is a MUST for preventing accidents that could result in bodily injury and substantial property damage. Make sure you fully understand all definitions of these terms and symbols given below before you proceed to the text itself. Alerts you to those conditions that could cause serious bodily injury or death if the instructions are not followed correctly. Alerts you to those conditions that could cause minor bodily injury or substantial property damage if the instructions are not followed correctly. Meaning of Symbols A triangle () with a picture inside alerts you to a warning of danger. Here you see the warning for electrical shock. A diagonal line through a circle () warns you of something you should not do; it may or may not have a picture inside. Here you see a screwdriver inside the circle, meaning that you should not disassemble. A black circle () with a picture inside alerts you to something you MUST do. This example shows that you MUST unplug the power cord. 6 To System Designers: • When introducing BHTs in those systems that could affect human lives (e.g., medicines management system), develop applications carefully through redundancy and safety design which avoids the feasibility of affecting human lives even if a data error occurs. Handling the battery cartridge • Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could cause battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury. • Do not carry or store the battery cartridge together with metallic ball-p…

Text truncated - open the document above for the full version.

FCC ID:PZWBHT300WB Model No: BHT-300BWB Denso Wave Incorporated External Photo Front Side Rear Side FCC ID:PZWBHT300WB Model No: BHT-300BWB Denso Wave Incorporated External Photo Left Side Right Side Bottom Side Upper Side

FCC ID:PZWBHT300WB Model No: BHT-300QWB Denso Wave Incorporated External Photo Front Side Rear Side FCC ID:PZWBHT300WB Model No: BHT-300QWB Denso Wave Incorporated External Photo Left Side Right Side Bottom Side Upper Side

Label Layout and Label location of BHT-300BWB Fig. Label Layout of BHT-300BWB Label Location Fig. Label Location Label Layout and Label location of BHT-300QWB Fig. Label Layout of BHT-300QWB Label Location Fig. Label Location

FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo Assembring Case of Ber-code Handy Terminal FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo Component Side of Main Board Solder Side of Main Board FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo LCD Panel Key Board Solder Side of Component Side FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo Wireless LAN Bluetooth Board FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo Bluetooth Board Wireless LAN Front of Component Side Bluetooth Board Wireless LAN Rear of Solder Side FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo Bluetooth Module IC Rear of Bluetooth Module IC FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo Component side of Wireless LAN FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo Solder side (with RF shield) of Wireless LAN FCC ID:PZWBHT300WB Model No: BHT-300BWB/ BHT-300QWB Denso Wave Incorporated Internal Photo Solder side (without RF shielded) of Wireless LAN

Test report No. : 25HE0109-HO-12 Page : 2 of 71 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 CONTENTS PAGE SECTION 1 : Client information...............................................................................................................................................3 SECTION 2 : Equipment under test .........................................................................................................................................4 SECTION 3 : Requirements for compliance testing defined by the FCC ..............................................................................9 SECTION 4 : Dosimetry assessment setup ...............................................................................................................................9 SECTION 5 : Test system specifications.................................................................................................................................13 SECTION 6: Test setup of EUT ..............................................................................................................................................14 SECTION 7 : Measurement uncertainty ................................................................................................................................19 SECTION 8 : Simulated tissue liquid parameter ...................................................................................................................20 SECTION 9 : System validation data......................................................................................................................................21 SECTION 10 : Evaluation procedure .....................................................................................................................................22 SECTION 11 : Exposure limit .................................................................................................................................................23 SECTION 12 : SAR Measurement results..............................................................................................................................24 SECTION 13 : Equipment & calibration information ..........................................................................................................26 SECTION 14 : References........................................................................................................................................................27 APPENDIX 1 : Photographs of test setup ............................................................................................................................ 28 APPENDIX 2 : SAR Measurement data............................................................................................................................... 37 APPENDIX 3 : Validation Measurement data..................................................................................................................... 50 APPENDIX 4 : System Validation Dipole (D2450V2,S/N: 765).......................................................................................... 52 APPENDIX 5 : Dosimetric E-Field Probe Calibration (ET3DV6,S/N: 1684).................................................................... 62 Test report No. : 25HE0109-HO-12 Page : 3 of 71 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 SECTION 1 : Client information Company Name : DENSO WAVE INCORPORATED Brand Name : DENSO Address : 1-1, Showa-cho, Kariyashi, Aichi-ken 448-8661 Japan Telephone Number : +81-566-61-3816 Facsimile Number : +81-566-25-4741 Contact Person : Hiroshi Hayami Test report No. : 25HE0109-HO-12 Page : 4 of 71 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 SECTION 2 : Equipment under test 2.1 Identification of E.U.T. Applicant : DENSO WAVE INCORPORATED Type of Equipment : Handy Terminal Model No. : BHT-300BWB Serial No. : 4963103310500132 Country of Manufacture : Japan Receipt Date of Sample : July 14,2005 Category Identified : Portable device Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Battery option : Only one model with EUT Type : Li-ion Battery Model name : 496461-0450 BT-20L V/mAh : 3.7V / 1700mAh Photograph of EUT Front Back Left side Test report No. : 25HE0109-HO-12 Page : 5 of 71 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 2.2 Product Description 1 We tested the EUT with which Wireless LAN adapter and Bluetooth module were inserted. The shortest distance between the surface of EUT and the antenna of Wireless LAN adapter is 6.42mm. Details of Wireless LAN adapter and Bluetooth module used while we are testing SAR is shown in the following. 2.2.1 Information of Wireless LAN adapter Wireless LAN adapter is located beside EUT. Type of Equipment : Wireless LAN adapter Model No. : KCS Serial No. : K036440004A1C1 Manufacture : DENSO WAVE INCORPORATED Tx Frequency : 2412MHz – 2462MHz Modulation : DSSS Rating : DC 3.3 – 3.5V Max.Output Power Tested : 16.28 dBm peak Conducted Antenna Type : Inverted F type multi-layer antenna Antenna Gain : Max 2.02dBi Test report No. : 25HE0109-HO-12 Page : 6 of 71 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 2.2.2 Information of Bluetooth module Bluetooth module is located beside EUT. Type of …

Text truncated - open the document above for the full version.

Test report No. : 25HE0109-HO-11 Page : 2 of 74 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 CONTENTS PAGE SECTION 1 : Client information...............................................................................................................................................3 SECTION 2 : Equipment under test .........................................................................................................................................4 SECTION 3 : Requirements for compliance testing defined by the FCC ..............................................................................9 SECTION 4 : Dosimetry assessment setup ...............................................................................................................................9 SECTION 5 : Test system specifications.................................................................................................................................13 SECTION 6: Test setup of EUT ..............................................................................................................................................14 SECTION 7 : Measurement uncertainty ................................................................................................................................19 SECTION 8 : Simulated tissue liquid parameter ...................................................................................................................20 SECTION 9 : System validation data......................................................................................................................................21 SECTION 10 : Evaluation procedure .....................................................................................................................................22 SECTION 11 : Exposure limit .................................................................................................................................................23 SECTION 12 : SAR Measurement results..............................................................................................................................24 SECTION 13 : Equipment & calibration information ..........................................................................................................26 SECTION 14 : References........................................................................................................................................................27 APPENDIX 1 : Photographs of test setup ............................................................................................................................ 28 APPENDIX 2 : SAR Measurement data............................................................................................................................... 40 APPENDIX 3 : Validation Measurement data..................................................................................................................... 53 APPENDIX 4 : System Validation Dipole (D2450V2,S/N: 713).......................................................................................... 55 APPENDIX 5 : Dosimetric E-Field Probe Calibration (ET3DV6,S/N: 1684).................................................................... 65 Test report No. : 25HE0109-HO-11 Page : 3 of 74 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 SECTION 1 : Client information Company Name : DENSO WAVE INCORPORATED Brand Name : DENSO Address : 1-1, Showa-cho, Kariyashi, Aichi-ken 448-8661 Japan Telephone Number : +81-566-61-3816 Facsimile Number : +81-566-25-4741 Contact Person : Hiroshi Hayami Test report No. : 25HE0109-HO-11 Page : 4 of 74 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 SECTION 2 : Equipment under test 2.1 Identification of E.U.T. Applicant : DENSO WAVE INCORPORATED Type of Equipment : Handy Terminal Model No. : BHT-300QWB Serial No. : 549690004450027 Country of Manufacture : Japan Receipt Date of Sample : March 22,2005 Category Identified : Portable device Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Battery option : Only one model with EUT Type : Li-ion Battery Model name : 496461-0450 BT-20L V/mAh : 3.7V / 1700mAh Photograph of EUT Front Back Left side Test report No. : 25HE0109-HO-11 Page : 5 of 74 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 2.2 Product Description 1 We tested the EUT with which Wireless LAN adapter and Bluetooth module were inserted. The shortest distance between the surface of EUT and the antenna of Wireless LAN adapter is 4.47mm. Details of Wireless LAN adapter and Bluetooth module used while we are testing SAR is shown in the following. 2.2.1 Information of Wireless LAN adapter Wireless LAN adapter is located beside EUT. Type of Equipment : Wireless LAN adapter Model No. : KCS Serial No. : 000B6B19DCED Manufacture : DENSO WAVE INCORPORATED Tx Frequency : 2412MHz – 2462MHz Modulation : DSSS Rating : DC 3.3 – 3.5V Max.Output Power Tested : 16.48 dBm peak Conducted Antenna Type : Inverted F type multi-layer antenna Antenna Gain : Max 2.02dBi Test report No. : 25HE0109-HO-11 Page : 6 of 74 Issued date : August 11, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 2.2.2 Information of Bluetooth module Bluetooth module is located beside EUT. Type of Eq…

Text truncated - open the document above for the full version.

Test report No. : 25HE0109-HO-9a Page : 1 of 61 Issued date : August 11, 2005 Revised date : August 24, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) EMI TEST REPORT Test Report No. : 25HE0109-HO-9a Applicant : DENSO WAVE INCORPORATED Type of Equipment : Handy Terminal Model No. : BHT-300QWB Test standard : FCC Part 15 Subpart C Section 15.207, Section 15.247 : 2005 FCC ID : PZWBHT300WB Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Apex Co., Ltd. 2. The results in this report apply only to the sample tested. 3. This equipment is in compliance with above regulation. We hereby certify that the data contain a true representation of the EMC profile. 4. The test results in this report are traceable to the national or international standards. Date of test: March 31 to July 25, 2005 Tested by: Makoto Kosaka EMC Service Yutaka Yoshida EMC Service Norihisa Hashimoto EMC Service Approved by : Naoki Sakamoto Group Leader of EMC Service Test report No. : 25HE0109-HO-9a Page : 2 of 61 Issued date : August 11, 2005 Revised date : August 24, 2005 FCC ID : PZWBHT300WB UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(01.06.05) CONTENTS PAGE SECTION 1: Client information ...................................................................................................................3 SECTION 2: Equipment under test (E.U.T.)...............................................................................................3 SECTION 3: Test specification, procedures & results ...............................................................................4 SECTION 4: Operation of E.U.T. during testing ........................................................................................7 SECTION 5: Conducted Emission................................................................................................................8 SECTION 6: Spurious Emission ...................................................................................................................9 SECTION 7: Bandwidth ................................................................................................................................9 SECTION 8: Maximum Peak Output Power ............................................................................................10 SECTION 9: Carrier Frequency Separation[FHSS].................................................................................10 SECTION 10: Number of Hopping Frequency[FHSS]..............................................................................10 SECTION 11: Dwell time[FHSS].................................................................................................................10 SECTION 12: Peak Power Density[DSSS]..................................................................................................10 APPENDIX 1: Photographs of test setup ...................................................................................................11 Conducted Emission ...............................................................................................................................................11 Spurious Emission (Radiated) .............................................................................................................................. 12 Worst Case Position (Y-axis:Horizontal / Z-axis:Vertical)................................................................................. 13 APPENDIX 2:Test instruments ...................................................................................................................14 APPENDIX 3: Data of EMI test...................................................................................................................15 Conducted Emission ...............…

Text truncated - open the document above for the full version.