Q2USNT250Dual BandGSM W/ GPS Tracking & BeaconTechnology

25 GeoTrax Protection LLC July 15, 2005 Volume 1, Issue 4 Automated, Advanced, Assured...We’Ve Got you’re a’s Covered A Guided Tour of the Mobile Tracking Device and Its Accompanying Service StealthTracker TM GT1040: User’s Manual and Installation Guide GeoTrax Protection Confidential and Proprietary – Do Not Disclose Page 27 of 27 Table of Contents Introduction 28 Getting Started With the StealthTracker™ 28 Turning the StealthTracker™ On 28 Turning the StealthTracker™ Off 29 Device Essentials 29 Battery Level Indicator Error! Bookmark not defined. GPS/GSM Strength Indicator Error! Bookmark not defined. Full Charge Indicator 29 Charging Indicator 29 Event Button Error! Bookmark not defined. Reprogramming Connector Error! Bookmark not defined. External Power Connector 29 Charging the StealthTracker™ Device 30 Device Do’s and Don’ts 30 Getting Started with the StealthTracker™ Service 30 Your First Login 31 Using the Site 31 Money Tracker Frame Description: 32 Troubleshooting 35 Device Problems Error! Bookmark not defined. Device Does Not Turn On Error! Bookmark not defined. The Battery Level Indicator Light Does Not Flash Error! Bookmark not defined. The GPS/GSM Strength Indicator Does Not Flash Error! Bookmark not defined. Web Problems 35 Cannot Login 35 Specifications Error! Bookmark not defined. Certification Error! Bookmark not defined. Device Markings Error! Bookmark not defined. GeoTrax Protection Confidential and Proprietary – Do Not Disclose Page 28 of 28 Introduction Thank you for choosing the StealthTracker™ by GeoTrax for your covert tracking needs. Your investment in this system will allow you improved awareness and up-to-date location of your assets and enable tracking in a wide range of applications. Please read these instructions completely and thoroughly as the StealthTracker™ has many advanced features. Keep this manual handy for future reference or for information on how to contact GeoTrax for support or help. GeoTrax and its technology, sales and marketing partners have created a mobile device for the tracking and recovery of high-value assets. The StealthTracker™ device and its associated web service is a tool for security and law enforcement officials to recoup stolen assets and bring those responsible to justice. Thousands of thefts every year occur without any recovery or arrest because the valuable items are impossible to track after they have been stolen. The StealthTracker™ was developed to use state-of-the-art tracking and communications technology to help aid in the recovery of the stolen goods. We at GeoTrax are dedicated to making this device as straightforward as possible giving you, the consumer, the benefit of advanced tracking capability without having to understand complex jargon or complicated operating instructions. We look forward to many years of meeting your covert tracking needs with this innovative and capable product. Getting Started With the StealthTracker™ The SteathTracker™ is shipped to you with all of the tools necessary to successfully track the mobile device. The included equipment allows you to charger the unit while either at home, the office or in your car. Also included are two keys so that the device can be locked into the On or Off position. Additionally, an information card is included instructing you on how to access the tracking information on the GeoTrax website. A list of the included pieces are below and you should verify that all of these were in the shipment with your StealthTracker™ device. Contents of the StealthTracker™ Box Item Description 1 SteathTracker™ Device 2 Wall Charger Unit 3 Auto-Charger Unit 4 On/Off Switch Keys (2) 5 This manual Turning the StealthTracker™ On Your StealthTracker™ a dongle control its on/off status. It is shipped to you with the On/Off switch “Finally, a self- contained, autonomous tracking device that is not only affordable but easy to use.”” GeoTrax Protection Confidential and Proprietary – Do Not Disclose Page 29 of 29 in the “Off” position (dongle connected). The device should be partially charged when it is shipped to you. The On/Off dongle connector (circled on the left) has a water-resistant cover (when dongle is not in place) and a single dongle was provided along with the StealthTracker™ device. Remove the dongle by rotating it counter-clockwise and pull gently. Follow the instructions in the “Getting Started with the StealthTracker™ Service” to see your tracking information. Turning the StealthTracker™ Off When not using the StealthTracker™ it can be locked into the Off position by inserting the dongle provided into the external connector and turning clockwise. The StealthTracker™ can be stored in this configuration for months without battery recharge (assuming that the battery was near full charge when it was turned off). However, to enable tracking the device must ALWAYS be turned back on prior to use. Device Essentials It is important that you familiarize yourself with the operation of the StealthTracker™. There is a single indicator on the top panel that give you important information on the current status of the StealthTracker™. You can use this indicator to determine the charging status. Full Charge Indicator When an external charger is connected to the device (either the wall charger or car charger) this indicator will turn GREEN on when the battery is fully charged. Note that while the charging adpater is in the device, the device is powered off. Charging Indicator When an external charger is connected to the device (either the wall charger or car charger) this indicator will turn on. When the battery is fully charged this indicator will go out. Note that this indicator will indicate the charging status even when the device is powered On or Off. External Power Connector This connetor is where either the wall charger or the car charger is inserted GeoTrax Protection Confidential and Proprietary – Do Not Disclose Page 30 of 30 to recharge the battery. It is necessary to keep the …

Text truncated - open the document above for the full version.

GeoTrax Protection LLC * PO Box 6021, Scottsdale, AZ 85261 Tel 480.477-4950 * Fax 480.477-4950 * www.geotrax.com Date: October 9, 2006 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize the Testing Division of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS Testing Division as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, GeoTrax Protection LLC * PO Box 6021, Scottsdale, AZ 85261 Tel 480.477-4950 * Fax 480.477-4950 * www.geotrax.com discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, ___________________________________________ Richard A Fuller Senior Vice-President GeoTrax Protection LLC

GeoTrax Protection LLC * PO Box 6021, Scottsdale, AZ 85261 Tel 480.477-4950 * Fax 480.477-4951 * www.geotrax.com October 9, 2006 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality Gentlemen: In reference to the application under FCC ID:Q2USNT250, and pursuant to Sections 0.457(d)(l)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below: Schematics Block Diagrams Theory of Operation, Parts List These documents contain detailed system and equipment description and related information about the product that GeoTrax Protection LLC considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, GeoTrax Protection LLC considers that this information would be of benefit to its competitors, and that disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, ___________________________________________ Richard A Fuller Senior Vice-President GeoTrax Protection LLC

1 Chris Harvey From: Claire Hoque [[email protected]] Sent: Tuesday, January 30, 2007 5:57 PM To: Chris Harvey Cc: Julia Luke Subject: answer: GEOTRAX PROTECTION LLC, FCC ID: Q2USNT250, Assessment NO.: AN06T6304, Notice#2 Attachments: GSM0108 - FCC Part 24 report.pdf; GSM0108 - FCC Part 22 report.pdf; 06U0619-1C FCC PART 22 and 24 Report.pdf; Comparison Photos.pdf; GSM0108MG800_Schematic RevB.PDF; additional internal photos.pdf; User Manual(revised).pdf; 06U10619-2 FCC PART 95 Report.pdf; SNT250-Parts_List.pdf; GT1040-parts_list.pdf; GSM0108 module Parts List.PDF; Confidentiality Letter(revised).pdf; FCC Label(revised).pdf; Theory of Op.(revised).pdf GSM0108 - FCC Part 24 report.p... GSM0108 - FCC Part 22 report.p... 06U0619-1C FCC PART 22 and 24 ... Comparison Photos.pdf (259 KB). GSM0108MG800_Sc hematic RevB.PD... additional internal photos.pdf... User ual(revised).pdf (2 M 06U10619-2 FCC PART 95 Report... SNT250-Parts_List. pdf (38 KB) GT1040-parts_list.p df (38 KB) GSM0108 module Parts List.PDF ... Confidentiality Letter(revised... FCC el(revised).pdf (66 K Theory of Op.(revised).pdf (26. Hi Chris, Pls see answe below, thanks. -----Original Message----- From: Chris Harvey Sent: Monday, December 04, 2006 5:36 AM To: Michael Heckrotte Cc: Chris Harvey; Claire Hoque; Thu Chan Subject: GEOTRAX PROTECTION LLC, FCC ID: Q2USNT250, Assessment NO.: AN06T6304, Notice#2 Dear Michael Heckrotte, You are listed as the technical contact for the above referenced TCB application. The following is an updated list of items that are needed before the application review can be completed: 1. This application is for a new, original certification of a composite device operating in FCC Parts 22H, 24E and 90. The RF test report for Pt. 22/24 states: "Since the EUT used the same output powers as previously and the antenna with a maximum gain of 0dBi, thus all tests were performed only on radiated emissions." However, since this application is for an original device, the entire application must stand alone, documenting complete compliance with all of the appropriate Rule Parts. <answer>report is revised, attached. Attached pls also find module reports. 2. There is a description of 2 models (SNT-250 and GT1040) indicating that the GT1040 has a larger case (both plastic), more batteries and no magnet. There appear to not have been photos submitted of the GT1040. Please submit photos of the GT1040 unit and comparison photo between the 2 versions and an indication as to why these are considered electrically identical. The Theory of Operation exhibit indicates that this application contains a Class II Permissive Change, which is not correct, since this is a new FCC ID. <answer>The two models are electrically identical,they have the same schematic, identical parts-lists and the same board layouts. Client would like to include 2 models (SNT-250 and GT1040)in this application. 2 Attached pls find comparision photos and revised Theory of Operation. 3. The Schematic Diagram exhibit submitted has a component location for the Enfora GSM module, but the schematic for that module has not been provided. <answer>attached pls find module schematic(pls keep it confidential). 4. The Internal Photos show the Enfora module attached to the larger PC Board. Please provide photographs of both sides of the Enfora GSM module as well as the circuit board under the GSM module with the module removed. <answer>pls see additional internal photos. 5. Please submit an RF Exposure exhibit that documents compliance with the FCC's RF Exposure requirements for this composite device and the RF Exposure guidance in the Users Manual. <answer>report is updated with MPE, and manual is also revised with RF Exposure guidance. 6. The ERP and EIRP power values listed in the test report do not match the values listed on the application Form 731. Please correct this discrepancy. <answer>731 form is updated. 7. This application is filed as a single application, but this will cover both TCB Scopes B1 (PCB) and B2 (TNB). Please confirm that administratively this can be handled as a single application or if this will need to be submitted as 2 applications using the same FCC ID? <answer>this is a single application which covers both TCB Scopes B1 (PCB) and B2 (TNB). 8. Please provide an Emission Designators for the both the GSM Pt. 22/24 and Pt. 95 transmitters along with an explanation and justification of the Emissions Designators. <answer>731 form now has Emission Designator info. The GSM transceiver of Pt. 22/24 has an emissions designator of 320KG7W and 313KG7W, phase modulation, with two or more channels of quantized digital data, and it can support facsimile, telephony, and data transmissions (although only data transmissions are used in this application) The Pt. 95 transmitter has an emissions designator of 2K55P0N, with a sequence of unmodulated pulses, no modulating signal, and no information transmitted 9. Please submit a complete RF Parts List for this device, including the previously approved modules installed. <answer>complete Parts Lists are attached, confidential letter is revised to include Parts List. 10. Please submit the information required about disclosure and labeling for the Pt. 95 LPRS device in accordance with FCC 95.1015 and 95.1017. <answer>revised label is attached. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best regards, Chris Harvey [email protected]

SNT-250 Top GT1040 Top SNT-250 Bottom GT1040 Bottom

FCC Label FCC Label Location

16 5.0 Parts and Tuneup Procedure 5.1 GSM Module Tuneup Procedure Each modem is tested during routine supplier testing; • The modems are tested to GSM standards using an Agilent 8960 GSM test set. • Multiple channels and power levels are tested and if correction is necessary. • If correction is necessary, the "Automatic Power Control" software tables are adjusted in the modem's Flash memory. • After passing all tests, the modem is labeled and assigned an IMEI During final assembly of the SNT-250, the signal power is verified to be within 5 dB of nominal levels. 5.2 GPS Section Tuneup Procedure During final assembly if the SNT-250, the signal levels of actual GPS satellites are recorded. These are compared to past results and if they are within 5 dB. 5.3 RF Beacon Section Tuneup Procedure Each completed SNT-250 is tested for RF Beacon operation. A beacon receiver (Wildlife Materials model TRX-3S) is used during final assembly to verify that the power level is normal for its sole operating power level. Normal is indicated by the peak number of LEDs lit during beacon operation. 5.4 Device Tuneup Procedure Results from sections 5.1, 5.2 and 5.3 are combined and if all levels are within normal operating parameters a label is printed and adhered to the device. An electronic record is made that the device has passed inspection and the signal levels of the tests.

FCC CFR47 PART 95 SUBPART G LOW POWER RADIO SERVICE CERTIFICATION TEST REPORT FOR GSM MULTI-BAND SELF-CONTAINED GPS TRACKING DEVICE WITH BEACON TECHNOLOGY MODEL NAME: GT1040 & SNT-250 FCC ID: Q2USNT250 REPORT NUMBER: 06U10619-2 ISSUE DATE: NOVEMBER 08, 2006 Prepared for GEOTRAX PROTECTION LLC PO BOX 6021 SCOTTSDALE, AZ 85261, USA Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD MORGAN HILL, CA 95037, USA TEL: (408) 463-0885 FAX: (408) 463-0888 *Details of specific model(s) tested and model differences are identified in body of report REPORT NO: 06U10619-2 DATE: NOVEMBER 08, 2006 EUT: GSM MULTI-BAND SELF-CONTAINED GPS TRACKING DEVICE FCC ID: Q2USNT250 Page 2 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. Revision History Rev. Issue Date Revisions Revised By -- 11/08/06 Initial Issue Thu REPORT NO: 06U10619-2 DATE: NOVEMBER 08, 2006 EUT: GSM MULTI-BAND SELF-CONTAINED GPS TRACKING DEVICE FCC ID: Q2USNT250 Page 3 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................................ 4 2. TEST METHODOLOGY..................................................................................................................... 5 3. FACILITIES AND ACCREDITATION .............................................................................................. 5 4. CALIBRATION AND UNCERTAINTY ............................................................................................ 5 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................................. 5 4.2. MEASUREMENT UNCERTAINTY ............................................................................................... 5 5. EQUIPMENT UNDER TEST .............................................................................................................. 6 5.1. DESCRIPTION OF EUT ..............................................................................................................6 5.2. MANUFACTURER’S DESCRIPTION OF MODEL DIFFERENCES.......................................... 6 5.3. WORST-CASE CONFIGURATION AND MODE......................................................................... 6 5.4. MAXIMUM OUTPUT POWER .................................................................................................... 6 5.5. DESCRIPTION OF AVAILABLE ANTENNAS ............................................................................. 7 5.6. SOFTWARE AND FIRMWARE .................................................................................................... 7 5.7. DESCRIPTION OF TEST SETUP ................................................................................................ 7 6. TEST AND MEASUREMENT EQUIPMENT .................................................................................... 9 7. LIMITS AND RESULTS ................................................................................................................... 10 7.1. OCCUPIED BANDWIDTH ........................................................................................................ 10 7.1. RF POWER OUTPUT.................................................................................................................12 7.2. FREQUENCY STABILITY .......................................................................................................... 14 7.3. SPURIOUS EMISSION AT ANTENNA TERMINAL................................................................... 16 7.4. FIELD STRENGTH OF SPURIOUS RADIATION..................................................................... 18 8. SETUP PHOTOS................................................................................................................................ 21 REPORT NO: 06U10619-2 DATE: NOVEMBER 08, 2006 EUT: GSM MULTI-BAND SELF-CONTAINED GPS TRACKING DEVICE FCC ID: Q2USNT250 Page 4 of 24 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: GEOTRAX PROTECTION LLC P O BOX 6021 SCOTTSDALE AZ 85261, U.S.A EUT DESCRIPTION: GSM MULTI-BAND SELF-CONTAINED GPS TRACKIG DEVICE WITH BEACON TECHNOLOGY MODEL TESTED: GT1040 SERIAL NUMBER: 010666000084422 DATE TESTED: OCTOBER 9-13, 2006 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 95 SUBPART G NO NON-COMPLIANCE NOTED Compliance Certification Services, Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification Services will constitute fraud and shall nullify the document. No part of this report may be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any government agency. Approved & Released For CCS By: Tested By: THU CHAN CHIN PANG EMC SUPERVISOR EMC ENGINEER COMPLIANCE CERTIFICATION SERVICES COMPLIANCE CERTIFICATION SERVICES REPORT NO: 06U10619-2 DATE: NOVEMBER 08, 2006 EUT: GSM MULTI-B…

Text truncated - open the document above for the full version.