
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Page 1 of 15 Thermo King Corporation Proprietary Information REB Installation Guide Revision No.4 Approval Signature Date PROPRIETARY NOTICE This document contains information proprietary to Thermo King Corporation. It is submitted in confidence and is to be used solely for the purpose for which it is furnished and returned upon request. This document and such information is not to be reproduced, transmitted, disclosed or used otherwise in whole or in part without the written authorization of Thermo King Corporation. Revision History: Revision Level Description Date 1 S. Ed. Tan Draft Dec. 14, 2011 2 S. Ed. Tan March 13, 2010 3 S. Ed. Tan For 3G install January, 19, 2015 4 S. Ed. Tan Add SAR note April 3, 2015 Page 2 of 15 Thermo King Corporation Proprietary Information Page 3 of 15 Thermo King Corporation Proprietary Information Regulatory Statements: FCC Rules: This device complies with (Part 15.19) of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications made to this equipment not expressly approved by Thermo King Corporation may void the FCC authorization to operate this equipment. Compliance Statement (Part 15.105(b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Page 4 of 15 Thermo King Corporation Proprietary Information Industry Canada (IC) regulatory information: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ‘Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.’ ‘Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.’ Class B digital notice This Class B digital apparatus complies with Canadian ICES-003, RSS-Gen and RSS-210 Cet appareli numeriques de la classe B est conforme a La norme NMB-003, CNR-Gen et CNR-210 du Canada CAN ICES-3 (B) / NMB-3 (B Page 5 of 15 Thermo King Corporation Proprietary Information 1. Introduction: This document will describe how REB and the antenna system are installed in the Thermo King unit in the factory and in the field. 2. Installation of REB to the mother board SR3 controller. a. Plug- in REB with plastic housing to the SR3 controller board via connector RJ98. b. Secure board to the SR3 controller board using two screws provided in the kit. c. Mount the boards to the metal control box. See drawing for details. d. Connect antenna connectors to corresponding REB connectors. Please review connection and make sure the label match antenna and REB. e. Route Antenna cable as shown in the drawing below. f. Plug-in back-up battery. Page 6 of 15 Thermo King Corporation Proprietary Information Page 7 of 15 Thermo King Corporation Proprietary Information Note: The antenna system located on the top of a Thermo King Refrigeration Unit- installed on the side of a trailer body at least 10 feet from a human body (driver inside the tractor and technician in the ground). Therefore: 1. Safe from radio frequency exposure 2. Meets SAR guidelines. 3. REB Wi-Fi Configuration: 3.1 Required Materials: REB – Radio Expansion Board TDAC- Tracking Diagnost…
Text truncated - open the document above for the full version.