Q47-MCROEMCONTACTLESS SMART CARD READER

Page 1 of 21 EMC Technologies Pty Ltd ABN 82 057 105 549 Unit 3/87 Station Road Seven Hills NSW 2147 Australia Telephone +61 2 9624 2777 Facsimile +61 2 9838 4050 Email [email protected] www.emctech.com.au Melbourne 57 Assembly Drive Tullamarine Vic 3043 Tel: +61 3 9335 3333 Fax: +61 3 9338 9260 Sydney Unit 3/87 Station Road Seven Hills NSW 2147 Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Brisbane 1/15 Success Street Acacia Ridge Qld 4110 Tel: +61 7 3875 2455 Fax: +61 7 3875 2466 Auckland (NZ) 47 MacKelvie Street Grey Lynn Auckland Tel: +64 9 360 0862 Fax: +64 9 360 0861 APPENDIX I OF TEST REPORT T50915R_F Installation Manual FCC ID: Q47-MCROEM Manufacturer: ERG Transit Systems Test Sample: Contact less Smart Card Readers Model: MCR_OEM Serial No: 14.7456MHz Unit: Antenna - 0350435, Main Board - 04273566 and 22.1184MHz Unit: Antenna - 05129574, Main Board - 0504009 Date: 27 th October 2005 Device Product Group MCROEM User Manual Document No: DPG-00604 Category: 431 Revision: 1.0 ERG Approvals Author Process Manager Manager Name: Dan Zorde Stefan Walter Gino Bertino Signature: Date: This material is confidential to ERG and may not be disclosed in whole or in part to any third party nor used in any manner whatsoever other than for the purposes expressly consented to by ERG in writing. This material is also copyright and may not be reproduced, stored in a retrieval system or transmitted in any form or by any means in whole or in part without the express written consent of ERG. Device Product Group Security Level 3 MCROEM User Manual DPG-00604 ERG Confidential © ERG 2005 Page 2 of 20 Revision 1.0 / 11 October 2005 Document History Revision Revision Date Description Author 0.1 8 Aug 2005 Draft Dan Zorde 0.2 2 Sep 2005 Updates to Section 4.4 and onwards Dan Zorde 0.3 21 Sep 2005 Updates as per advice from EMC Tech Dan Zorde 0.4 11 Oct 2005 Change FCC ID to Q47-MCROEM Dan Zorde 1.0 11 Oct 2005 First release Dan Zorde Device Product Group Security Level 3 MCROEM User Manual DPG-00604 ERG Confidential © ERG 2005 Page 3 of 20 Revision 1.0 / 11 October 2005 Table of Contents 1 INTRODUCTION ....................................................................................................................................... 6 1.1 PURPOSE............................................................................................................................................. 6 1.2 SCOPE................................................................................................................................................. 6 1.3 TERMINOLOGY..................................................................................................................................... 6 2 OVERVIEW OF THE MCR ........................................................................................................................ 7 3 MODULE ARCHITECTURE ...................................................................................................................... 9 3.1 ELECTRICAL SPECIFICATION.................................................................................................................. 9 3.2 HOST SERIAL COMMUNICATION INTERFACE............................................................................................ 9 3.3 POWER SUPPLY................................................................................................................................. 10 3.4 RF CONTROLLER................................................................................................................................10 3.4.1 Transmitter ............................................................................................................................... 10 3.4.2 Receiver ................................................................................................................................... 10 3.4.3 Card Interface .......................................................................................................................... 10 4 INTERFACE CONNECTIONS................................................................................................................. 11 4.1 SUPPORTED COMMUNICATIONS INTERFACES....................................................................................... 11 4.1.1 Communications Interface Connector ..................................................................................... 11 4.1.2 Communications Interface Connection .................................................................................... 11 4.2 SUPPORTED LCD INTERFACE............................................................................................................. 11 4.2.1 LCD Interface Connector .........................................................................................................11 4.2.2 LCD Interface Connection........................................................................................................12 4.3 SUPPORTED I/O INTERFACES.............................................................................................................. 12 4.3.1 I/O Interface Connector............................................................................................................ 12 4.3.2 I/O Interface Connection .......................................................................................................... 13 4.4 INTERCONNECTING CABLE................................................................................................................... 14 5 MECHANICAL SPECIFICATION ............................................................................................................ 15 5.1 PHYSICAL DIMENSIONS....................................................................................................................... 15 5.1.1 Size .......................................................................................................................................... 15 5.1.2 Mounting Holes ..…

Text truncated - open the document above for the full version.

Page 1 of 3 EMC Job No. T50915 EMC Technologies Pty. Ltd A.C.N. 057 105 549 Unit 3, 87 Station Road, Seven Hills, N.S.W. 2147. Australia. Ph +612 9624 2777 Fax +612 9838 4050 Mobile 0407 553 218 email [email protected] Victoria 57 Assembly Drive Tullarmarine, Victoria Australia 3043 Telephone +61 3 9335 3333 Facsimile +61 3 9338 9260 Accredited Testing and Competent Body Service 16 th November 2005 Request for Modular Approval for FCC ID: Q47-MCROEM The device we are looking for modular approval for are two smart card readers. Details of the device are provided in Technical User Manual in Appendix I of the EMC report. The unit complies with notice DA00-1407 for Part 15 Unlicensed Modular Transmitter Approval in the following ways: 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with Part 15 limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Answer 1 The unit was tested stand alone. The only external device is a ferrite core, which is provided with the device in the cable harness. Details of the ferrite and installation are provided in Appendix K of the EMC Report. The unit has been designed with screening in mind as the multi layed PCB have been used to limit both emissions from the unit and its susceptibility from other devices. Metal screens are provided on the Antenna and Control boards. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Answer 2 The transmitter/Receiver is buffered in the assembly. The only data connection is and RS 232 or RS 485 interface. No direct connection is provided to the Tx/Rx. 3. The modular transmitter must have its own power supply regulation. This is intended to ensure that the module will comply with Part 15 requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. Answer 3 The unit has its own supply regulation details of the power supply are provided in Appendix G section 2.5 and on the circuit diagram Appendix E page 9. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Any antenna used with the module must be approved with the module, either at the time of initial authorization or through a Class II permissive change. The “professional installation” provision of Section 15.203 may not be applied to modules. Answer 4 The antenna is part of the unit in the form of a PCB, which is connected to the Tx/Rx via a cable. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits 3 regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). Answer 5 The unit was tested stand-alone. The cable proved with Ferrite was representative and will be provided with the unit. The unit was tested with a switch mode PSU to represent the typical final installation. The data cable and the supply were greater than 10cm in length. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Answer 6 ERG in there Installation Manual have provided details of the installation of the unit and the labelling required. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Answer 7 The transmitter…

Text truncated - open the document above for the full version.

To: TIMCO ENGINEERING INC. Attention: Bruno Clavier FCC ID: Q47-MCROEM No of pages: 1 EMC Ref: T50915 Date: 16 th November 2005 Subject: Certification application – Requested information REFERENCE: JOB 2280AC5 Based upon our review of this application we have the following questions: 1. FCC ID: Please be advised that the FCC ID for this application is not acceptable. The underscore ( _ ) is not an acceptable character. Please advise the applicant and resubmit the application with the underscore removed. All correspondence and documents have been revised and show correct FCC ID. 2. The following documents were not received: Block Diagram & Operational Description Exhibits – Block Diagram and Operational Description have been included in revised submission 3. FYI- Please be advised that the PCB Layout exhibit is not required. However, we will submit it to the FCC for this application and as a confidential document. Noted. 4. Please confirm that the RF portion of the 14M and 20M boards is electrically identical. Two models can be marketed under the same FCCID if they are electrically identical according to part 2.924 and the differences between models do not fall under the prohibited changes as listed under 2.1043 (i.e. differences in power output or field strength, modulator, freq. determining and stabilization circuitry, etc.). The manufacturer has confirmed that the RF portion of both readers is exactly the same. The only difference between the two readers is the speed at which the main processor operates. The speed of the main processor is totally independent of the actual MF RC531chip that handles all the RF, this operates of its own 13.56MHz crystal. EMC Technologies Pty Ltd ABN 82 057 105 549 57 Assembly Drive Tullamarine Victoria Australia 3043 Ph: + 613 9335 3333 Fax: + 613 9338 9260 email: [email protected]

Page 1 of 5 EMC Technologies Pty Ltd ABN 82 057 105 549 Unit 3/87 Station Road Seven Hills NSW 2147 Australia Telephone +61 2 9624 2777 Facsimile +61 2 9838 4050 Email [email protected] www.emctech.com.au Melbourne 57 Assembly Drive Tullamarine Vic 3043 Tel: +61 3 9335 3333 Fax: +61 3 9338 9260 Sydney Unit 3/87 Station Road Seven Hills NSW 2147 Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Brisbane 1/15 Success Street Acacia Ridge Qld 4110 Tel: +61 7 3875 2455 Fax: +61 7 3875 2466 Auckland (NZ) 47 MacKelvie Street Grey Lynn Auckland Tel: +64 9 360 0862 Fax: +64 9 360 0861 APPENDIX C OF TEST REPORT T50915R_F Photographs of Test Sample (Exterior) FCC ID: Q47-MCROEM Manufacturer: ERG Transit Systems Test Sample: Contact less Smart Card Readers Model: MCR_OEM Serial No: 14.7456MHz Unit: Antenna - 0350435, Main Board - 04273566 and 22.1184MHz Unit: Antenna - 05129574, Main Board - 0504009 Date: 27 th October 2005 FCC ID: Q47-MCROEM Report No. T50915R_F Appendix C Page 2 of 5 APPENDIX C1 TEST SETUP PHOTOS – 14MHz FCC ID: Q47-MCROEM Report No. T50915R_F Appendix C Page 3 of 5 APPENDIX C2 TEST SETUP PHOTOS – 14MHz FCC ID: Q47-MCROEM Report No. T50915R_F Appendix C Page 4 of 5 APPENDIX C3 TEST SETUP PHOTOS – 22MHz FCC ID: Q47-MCROEM Report No. T50915R_F Appendix C Page 5 of 5 APPENDIX C4 TEST SETUP PHOTOS Power Supply Label

Page 1 of 2 EMC Technologies Pty Ltd ABN 82 057 105 549 Unit 3/87 Station Road Seven Hills NSW 2147 Australia Telephone +61 2 9624 2777 Facsimile +61 2 9838 4050 Email [email protected] www.emctech.com.au Melbourne 57 Assembly Drive Tullamarine Vic 3043 Tel: +61 3 9335 3333 Fax: +61 3 9338 9260 Sydney Unit 3/87 Station Road Seven Hills NSW 2147 Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Brisbane 1/15 Success Street Acacia Ridge Qld 4110 Tel: +61 7 3875 2455 Fax: +61 7 3875 2466 Auckland (NZ) 47 MacKelvie Street Grey Lynn Auckland Tel: +64 9 360 0862 Fax: +64 9 360 0861 APPENDIX G OF TEST REPORT T50915R_F Test Sample Labelling - Location FCC ID: Q47-MCROEM Manufacturer: ERG Transit Systems Test Sample: Contact less Smart Card Readers Model: MCR_OEM Serial No: 14.7456MHz Unit: Antenna - 0350435, Main Board - 04273566 and 22.1184MHz Unit: Antenna - 05129574, Main Board - 0504009 Date: 27 th October 2005

Page 1 of 13 EMC Technologies Pty Ltd ABN 82 057 105 549 Unit 3/87 Station Road Seven Hills NSW 2147 Australia Telephone +61 2 9624 2777 Facsimile +61 2 9838 4050 Email [email protected] www.emctech.com.au Melbourne 57 Assembly Drive Tullamarine Vic 3043 Tel: +61 3 9335 3333 Fax: +61 3 9338 9260 Sydney Unit 3/87 Station Road Seven Hills NSW 2147 Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Brisbane 1/15 Success Street Acacia Ridge Qld 4110 Tel: +61 7 3875 2455 Fax: +61 7 3875 2466 Auckland (NZ) 47 MacKelvie Street Grey Lynn Auckland Tel: +64 9 360 0862 Fax: +64 9 360 0861 APPENDIX D OF TEST REPORT T50915R_F Photographs of Test Sample (Interior) FCC ID: Q47-MCROEM Manufacturer: ERG Transit Systems Test Sample: Contact less Smart Card Readers Model: MCR_OEM Serial No: 14.7456MHz Unit: Antenna - 0350435, Main Board - 04273566 and 22.1184MHz Unit: Antenna - 05129574, Main Board - 0504009 Date: 27 th October 2005 FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 2 of 13 APPENDIX D1 TEST SETUP PHOTOS – 14MHz FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 3 of 13 APPENDIX D2 TEST SETUP PHOTOS – 14MHz FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 4 of 13 APPENDIX D3 TEST SETUP PHOTOS – 14MHz Antenna Board Antenna Board (S/N) FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 5 of 13 APPENDIX D4 TEST SETUP PHOTOS – 14MHz FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 6 of 13 APPENDIX D5 TEST SETUP PHOTOS – 14MHz Main Board FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 7 of 13 APPENDIX D6 TEST SETUP PHOTOS – 14MHz Main Board (S/N) FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 8 of 13 APPENDIX D7 TEST SETUP PHOTOS – 22MHz FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 9 of 13 APPENDIX D8 TEST SETUP PHOTOS – 22MHz FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 10 of 13 APPENDIX D9 TEST SETUP PHOTOS – 22MHz FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 11 of 13 APPENDIX D10 TEST SETUP PHOTOS – 22MHz FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 12 of 13 APPENDIX D11 TEST SETUP PHOTOS – 22MHz FCC ID: Q47-MCROEM Report No. T50915_F Appendix D Page 13 of 13 APPENDIX D12 TEST SETUP PHOTOS – 22MHz

Page 1 of 2 EMC Technologies Pty Ltd ABN 82 057 105 549 Unit 3/87 Station Road Seven Hills NSW 2147 Australia Telephone +61 2 9624 2777 Facsimile +61 2 9838 4050 Email [email protected] www.emctech.com.au Melbourne 57 Assembly Drive Tullamarine Vic 3043 Tel: +61 3 9335 3333 Fax: +61 3 9338 9260 Sydney Unit 3/87 Station Road Seven Hills NSW 2147 Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Brisbane 1/15 Success Street Acacia Ridge Qld 4110 Tel: +61 7 3875 2455 Fax: +61 7 3875 2466 Auckland (NZ) 47 MacKelvie Street Grey Lynn Auckland Tel: +64 9 360 0862 Fax: +64 9 360 0861 APPENDIX A OF TEST REPORT T50915R_F Measurement Instrumentation FCC ID: Q47-MCROEM Manufacturer: ERG Transit Systems Test Sample: Contact less Smart Card Readers Model: MCR_OEM Serial No: 14.7456MHz Unit: Antenna - 0350435, Main Board - 04273566 and 22.1184MHz Unit: Antenna - 05129574, Main Board - 0504009 Date: 27 th October 2005 Page 2 of 2 APPENDIX A MEASUREMENT INSTRUMENTATION DETAILS Equipment Type Make/Model Serial Number Last Cal. DD/MM/YY Due Date DD/MM/YY EMI Receivers HP8546A CISPR Receiver S/N: 3549A00288 24/06/05 24/06/06 *2 ESCI EMI Receiver Rohde & Schwarz S/N: 100011 16/09/05 16/09/06 *2 LISN: EMCO 3825/2 SN 94112274 31/03/05 31/03/06 *3 Rohde & Schwarz ESH3-Z5 S/N 832479/014 31/03/05 31/03/06 *3 Antennas EMCO 3146 Log Periodic S/N 9603-4415 300-1000MHz 23/02/05 23/02/06 *3 EMCO 3110B Biconical S/N 9603-2350 20-300 MHz 23/02/05 23/02/06 *3 Active Loop EMCO, Model: 6502 S/N: 9108-2660 29/04/05 29/04/08 Preamplifier PRA1000-25B, S/N: 628 04/11/04 04/11/05 *3 Limiter Transient 11947A, S/N: 3107A01261 07/04/05 07/04/06 *2 60Hz Source Harmonic & Flicker Test System HP 6843A, S/N: 3531A00172 14/01/05 14/01/06 *2 Note *1 : National Measurements Institute calibration Note *2 : NATA Calibration by Hewlett Packard (Aust) Ltd Note *3 : In-house calibration. Traceable to Australian National Standards. TEST SITES Equipment Type Make/Model Serial Number Last Cal. DD/MM/YY Due Date DD/MM/YY Shielded Room/ Test Laboratory 7.23m × 4.83m × 2.45m N/A N/A Open Area Test Site (OATS) 3/10/30 metre site. 1-4 metre antenna mast. 1.2 metre/1.2 Tonne turntable. (Situated at Upper Colo, NSW) 26/11/04 26/11/05

Page 1 of 18 EMC Technologies Pty Ltd ABN 82 057 105 549 Unit 3/87 Station Road Seven Hills NSW 2147 Australia Telephone +61 2 9624 2777 Facsimile +61 2 9838 4050 Email [email protected] www.emctech.com.au Melbourne 57 Assembly Drive Tullamarine Vic 3043 Tel: +61 3 9335 3333 Fax: +61 3 9338 9260 Sydney Unit 3/87 Station Road Seven Hills NSW 2147 Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Brisbane 1/15 Success Street Acacia Ridge Qld 4110 Tel: +61 7 3875 2455 Fax: +61 7 3875 2466 Auckland (NZ) 47 MacKelvie Street Grey Lynn Auckland Tel: +64 9 360 0862 Fax: +64 9 360 0861 APPENDIX H OF TEST REPORT T50915R_F Graphs of EMI Measurements FCC ID: Q47-MCROEM Manufacturer: ERG Transit Systems Test Sample: Contact less Smart Card Readers Model: MCR_OEM Serial No: 14.7456MHz Unit: Antenna - 0350435, Main Board - 04273566 and 22.1184MHz Unit: Antenna - 05129574, Main Board - 0504009 Date: 27 th October 2005 FCC ID: Q47-MCROEM Report No. T50915R_F Appendix H Page 2 of 18 APPENDIX H LIST of GRAPHS of EMI MEASUREMENTS Conducted EMI Graph 1: Active Line, 0.145 to 30.5 MHz, 22MHz, Antenna Connected Graph 2: Neutral Line, 0.145 to 30.5 MHz, 22MHz, Antenna Connected Graph 3: Active Line, 0.145 to 30.5 MHz, 14MHz, Antenna Connected Graph 4: Neutral Line, 0.145 to 30.5 MHz, 14MHz, Antenna Connected Graph 5: Active Line, 0.145 to 30.5 MHz, 14MHz, Antenna Disconnected Graph 6: Neutral Line, 0.145 to 30.5 MHz, 14MHz, Antenna Disconnected Graph 7: Active Line, 0.145 to 30.5 MHz, 22MHz, Antenna Disconnected Graph 8: Neutral Line, 0.145 to 30.5 MHz, 22MHz, Antenna Disconnected Radiated EMI Graph 9: Ambient Emissions, 0.009 to 30 MHz, 14MHz Graph 10: Carrier, 13.554 to 13.564 MHz, 14MHz Graph 11: Vertical Polarisation, 29 to 1000 MHz, 14MHz Graph 12: Horizontal Polarisation, 29 to 1000 MHz, 14MHz Graph 13: Ambient Emissions, 0.009 to 30 MHz, 22MHz Graph 14: Carrier, 13.554 to 13.564 MHz, 22MHz Graph 15: Vertical Polarisation, 29 to 1000 MHz, 22MHz Graph 16: Horizontal Polarisation, 29 to 1000 MHz, 22MHz EMC Technologies Pty. Ltd. - Global Product CertificationFCC Class B Job No:T50915 R_F Test Date: 12/10/05 GRAPH No. 1 p:\PCF\T50915F_1.PCF EMC Technologies (Sydney) 3/87 Station Rd, Seven Hills, NSW, 2147, NSW, Australia Phone +(612) 9624 2777 Fax+(612) 9838 4050 ERG Transit Systems Contactless Smart Card Reader (22.1184MHz). Model: MCR_OEM. Antenna connected. Serial No: 05129574(antenna) & 05040099(main board). Conducted Emissions (dBuV) 50915cx1 Limits: Legend: Source: _ FCCN_BQP FCC CLASS B QP CONDUCTED LIMITS (CISPR) _ FCCN_BAV FCC CLASS B AV CONDUCTED LIMITS (CISPR) __ Active Line 7 8 9 Ver 5.5 Build 107 t:L0110306 c1:C0020906 c2:NONE p:NONE a:L0100406Site ID: Syd Room#2,3/87 Station Rd, Seven Hills, NSW Test Officer:Jodie Foyle Peaks:No Freq Peak Qp Val FCCN_BQP dL1 Av Val FCCN_BAV dL2 (MHz) (dBuV) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dB) 1 13.56 72.4 72.1 60.0 12.1 72.2 50.0 22.2 2 27.12 40.5 38.8 60.0 -21.2 38.8 50.0 -11.2 3 0.150 41.7 38.8 66.0 -27.3 23.4 56.0 -32.6 4 0.173 40.9 36.2 64.8 -28.6 21.9 54.8 -32.9 5 0.172 40.0 36.1 64.9 -28.8 21.9 54.9 -33.0 6 0.173 40.6 36.2 64.8 -28.6 21.8 54.8 -33.0 7 13.70 72.4 42.0 60.0 -18.0 16.3 50.0 -33.7 8 0.194 38.2 33.2 63.9 -30.7 20.0 53.9 -33.9 9 0.160 42.1 36.3 65.5 -29.2 21.4 55.5 -34.1 10 13.42 47.4 39.6 60.0 -20.4 15.3 50.0 -34.7 Frequency (MHz) 1 10 .145 30.5 10 20 30 40 50 60 70 80 90 v ^ 1 ~ * v ^ 2 ~ * v ^ 3 ~ * v ^ 4 ~ * v ^ 5 ~ * v ^ 6 ~ * v ^ 7 ~ * v ^ 8 ~ * v ^ 9~ * v ^ 10 ~ * EMC Technologies Pty. Ltd. - Global Product CertificationFCC Class B Job No:T50915 R_F Test Date: 12/10/05 GRAPH No. 2 p:\PCF\T50915F_2.PCF EMC Technologies (Sydney) 3/87 Station Rd, Seven Hills, NSW, 2147, NSW, Australia Phone +(612) 9624 2777 Fax+(612) 9838 4050 ERG Transit Systems Contactless Smart Card Reader (22.1184MHz). Model: MCR_OEM. Antenna connected. Serial No: 05129574(antenna) & 05040099(main board). Conducted Emissions (dBuV) 50915cx1 Limits: Legend: Source: _ FCCN_BQP FCC CLASS B QP CONDUCTED LIMITS (CISPR) _ FCCN_BAV FCC CLASS B AV CONDUCTED LIMITS (CISPR) __ Neutral Line 10 11 12 Ver 5.5 Build 107 t:L0110306 c1:C0020906 c2:NONE p:NONE a:L0100406Site ID: Syd Room#2,3/87 Station Rd, Seven Hills, NSW Test Officer:Jodie Foyle Peaks:No Freq Peak Qp Val FCCN_BQP dL1 Av Val FCCN_BAV dL2 (MHz) (dBuV) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dB) 1 13.56 70.7 70.4 60.0 10.4 70.5 50.0 20.5 2 27.12 40.3 38.6 60.0 -21.5 38.5 50.0 -11.5 3 11.69 31.0 28.3 60.0 -31.7 26.9 50.0 -23.1 4 13.63 49.9 42.6 60.0 -17.5 18.7 50.0 -31.3 5 0.150 42.1 38.4 66.0 -27.6 22.6 56.0 -33.4 6 0.173 41.1 36.3 64.8 -28.6 21.0 54.8 -33.8 7 0.174 41.1 36.0 64.8 -28.8 20.9 54.8 -33.9 8 0.166 41.2 36.3 65.2 -28.9 21.2 55.2 -34.0 9 0.193 38.1 33.2 63.9 -30.8 19.3 53.9 -34.6 10 13.45 70.6 37.2 60.0 -22.8 15.4 50.0 -34.6 11 0.201 38.1 33.3 63.6 -30.2 18.9 53.6 -34.7 Frequency (MHz) 1 10 .145 30.5 10 20 30 40 50 60 70 80 90 v ^ 1 ~ * v ^ 2 ~ * v ^ 3 ~ * v ^ 4 ~ * v ^ 5 ~ * v ^ 6 ~ * v ^ 7 ~ * v ^ 8 ~ * v ^ 9~ * v ^ 10 ~ * v ^ 11 ~ * EMC Technologies Pty. Ltd. - Global Product CertificationFCC Class B Job No:T50915 R_F Test Date: 12/10/05 GRAPH No. 3 p:\PCF\T50915F_3.PCF EMC Technologies (Sydney) 3/87 Station Rd, Seven Hills, NSW, 2147, NSW, Australia Phone +(612) 9624 2777 Fax+(612) 9838 4050 ERG Transit Systems Contactless Smart Card Reader (14.7456MHz) Model: MCR_OEM. Antenna connected. Serial No: 03504035(antenna) & 04273566(main board). Conducted Emissions (dBuV) 50915cx1 Limits: Legend: Source: _ FCCN_BQP FCC CLASS B QP CONDUCTED LIMITS (CISPR) _ FCCN_BAV FCC CLASS B AV CONDUCTED LIMITS (CISPR) __ Active Line 13 14 15 Ver 5.5 Build 107 t:L0110306 c1:C0020906 c2:NONE p:NONE a:L0100406Site ID: Syd Room#2,3/87 Station Rd, Seven Hills, NSW Test Officer:Jodie Foyle Peaks:No Freq Peak Qp Val FCCN_BQP dL1 Av Val FCCN_BAV dL2 (MHz) (dBuV) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dB) 1 13.56 73.8 73.5 60.0 13.5 73.7 50.0 23.7 2 27.12 48.5 48.0 60.0 -12.0 48.1 50.0 -1.9 3 13.63 52.9 45.8 60.0 -14.2 19.3 50.0 -30.7 4 0.150 43.2 38…

Text truncated - open the document above for the full version.

Page 1 of 25 EMC Technologies Pty Ltd ABN 82 057 105 549 Unit 3/87 Station Road Seven Hills NSW 2147 Australia Telephone +61 2 9624 2777 Facsimile +61 2 9838 4050 Email [email protected] www.emctech.com.au Melbourne 57 Assembly Drive Tullamarine Vic 3043 Tel: +61 3 9335 3333 Fax: +61 3 9338 9260 Sydney Unit 3/87 Station Road Seven Hills NSW 2147 Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Brisbane 1/15 Success Street Acacia Ridge Qld 4110 Tel: +61 7 3875 2455 Fax: +61 7 3875 2466 Auckland (NZ) 47 MacKelvie Street Grey Lynn Auckland Tel: +64 9 360 0862 Fax: +64 9 360 0861 Replacement Test Report for T50915_F EMI TEST REPORT for CERTIFICATION of FCC PART 15.225 & FCC PART 15.207 TRANSMITTER FCC ID: Q47-MCROEM Manufacturer: ERG Transit Systems Test Sample: Contactless Smart Card Readers Model: MCR_OEM Serial No’s: 14.7456MHz Unit: Antenna - 0350435, Main Board - 04273566 and 22.1184MHz Unit: Antenna - 05129574, Main Board - 0504009 Date: 20 th October 2005 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. All samples tested were in good operating condition throughout the entire test program. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, interferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. The tests, calibrations or measurements covered by this document have been performed in accordance with NATA requirements which include the requirements of ISO/IEC 17025 and are traceable to national standards of measurement. This document shall not be reproduced, except in full. NATA Accredited Laboratory Number: 5292 FCC ID: Q47-MCROEM Report No. T50915R_F Page 2 of 25 EMI TEST REPORT FOR CERTIFICATION FOR CERTIFICATION OF FCC Part 15.225 & FCC PART 15.207 TRANSMITTER FCC ID: Q47-MCROEM EMC Technologies Report No. T50915R_F Date: 20 th October 2005 CONTENTS 1. SUMMARY of TEST RESULTS 2. GENERAL INFORMATION 3. CONDUCTED EMI RESULTS 4. RADIATED EMI RESULTS 5. FREQUENCY TOLERANCE 6. CONCLUSION APPENDIX A. MEASUREMENT INSTRUMENTATION DETAILS APPENDIX B. PHOTOGRAPHS TEST SETUP APPENDIX C. PHOTOGRAPHS TEST SAMPLE (EXTERIOR) APPENDIX D. PHOTOGRAPHS TEST SAMPLE (INTERIOR) APPENDIX E. TEST SAMPLE SCHEMATICS APPENDIX F. TEST SAMPLE PCB LAYOUTS APPENDIX G. LABELLING – LOCATION APPENDIX H. GRAPHS of EMI MEASUREMENT APPENDIX I. INSTALLATION MANUAL APPENDIX J. OPERATION DESCRIPTION APPENDIX K. BLOCK DIAGRAM EMC Technologies Pty Ltd Unit 3, 87 Station Road Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 FCC ID: Q47-MCROEM Report No. T50915R_F Page 3 of 25 EMI TEST REPORT FOR CERTIFICATION OF FCC PART 15.225 & FCC PART 15.207 TRANSMITTER Report Number: T50915R_F Test Sample Name: Contactless Smart Card Readers Model Number: MCR_OEM Serial Number’s: 14.7456MHz Unit: Antenna - 03504035, Main Board - 04273566 and 22.1184MHz Unit: Antenna - 05129574, Main Board - 0504009 FCC ID: Q47-MCROEM Manufacturer: ERG Transit Systems Tested For: ERG Transit Systems Address: 247 Balcatta Road Balcatta WA 6021 Phone: (08) 9273 1100 Fax: (08) 9273 1570 Responsible Party: Mr Dan Zorde/Mr Gino Bertino Test Standards: FCC Part 15.225 Intentional Radiators FCC Part 15.207…

Text truncated - open the document above for the full version.