Q54CDR0193XRF Card & Fingerprint Terminal

1/4033 Smart FingerPrint Reader CDR-CDR-0193X / CFN-1000 User Manual (Ver2.0) S1 Corporation 2/4033 Safety precautions These precautions aim at preventing users from being injured, experiencing discomfort or having property damaged. Be sure to read them thoroughly.  Warning If this notice is ignored, the user may be fatally injured.  Caution If this notice is ignored, the user may be injured and/or damaged in properties Warning ●DO NOT randomly move or relocate the system. If you want to move or relocate the system, please be sure to contact us to prevent any dangerous situation such as a system failure, electric shock, or fire. (You will be billed the additional relocation costs.) ●DO NOT place the system near a high-heat source. The system may melt, causing an electric short, spark or fire. ●DO NOT randomly disassemble, repair, or remodel the system. This may cause a system failure, electric short, or fire. For any repairs, please contact us. ●To prevent an electric shock: DO NOT handle the system with wet hands nor expose the system to any liquids (water, beverage, etc.). This may result in fire or an electric short or spark. Caution ●Be sure to install the system directly away from sun rays. If not, the external façade may deteriorate or the lifecycle may be shortened. ●DO NOT install the system in a place with high humidity and/or much dust. This may cause an electric shock or system failure. ●DO NOT install the system in any place with wide temperature fluctuations. The system may be damaged, causing failure. ●DO NOT impact or shake the system. This may result in a system failure. ●DO NOT use the system for other purposes than access. The system may be damaged, causing a failure. 3/4033 Caution ●DO NOT allow children to mishandle the system. An accident may occur or a system failure. ●Be sure to frequently clean the system of dust. ●Be sure to protect your fingers from the sharp edges of the card. ●Be sure to keep the card with you. If lost, please notify us. ●DO NOT make scribblings on the card or allow it to be tainted or disfigured. ●DO NOT allow children access to the card or place it around any magnetized appliance such as a TV, refrigerator, etc. ●DO NOT warp, cut or otherwise mangle the card. ●DO NOT put the system around magnetized objects. This may cause a system failure and/or malfunction. ●DO NOT press buttons with pointy objects such as a needle or pencil. This may cause a system failure ●DO NOT put any sharp object on the system such as a knife. The surface may get scratched. ●DO NOT put water directly on the system or use benzene, thinner, or alcohol to clean the system. This may cause an electric short or fire. ●DO NOT spray any pesticide or flammable spray on or near the system. This may cause a system failure and/or fire. ●Be sure to contact us once you experience any system failure or other problems. LABELLING REQUIREMENTS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. 4/4033 Before system use: Familiarize yourself with the names of the system components. ▼ Smart Fingerprint reader LCD Display the currentreader status. LED Entrance/exit : turns green in powerprovisionand gets blinking duringuserauthentication. Abnormalconditions : turns red in readerabnormalities. Setconditions : turns yellow in activatedcrimeprevention function. Cardreadingpart Put thecardnear thepart. Keypad ( to enter numbers) 0 ~ 9 : number button Esc, Enter : See how to use buttons Attendance mgmt button Attendance management Fingerprint Put your fingerprint here 5/4033 1. Input/Output Spec. X RT(- )+RT(- )+T+T-R+R- 1234 17 56789101112 LO CKEXIT 13141516 - External Input/Output Terminal NoNameInput/O utputSpecification 1+Input Power 2(- )Input 3TInputRS-422 Receive (Rx) 4ROutputRS-422 Send (Tx) 5+Input Power 6(- )Input 7TInputRS-422 Receive (Rx) 8ROutputRS-422 Send (Tx) 9R- Input/O utputRJ-45 Output 10R+ 11T- 12T+ 13 EXIT Input Ifreaderdirectlycontro l the door :EXITButton 14Input 15Notused 16 LO CK No voltage Output For onlysingletype, used for Electric magneticlock. ¡Ø By using Electric magneticlock type selection switch, selectNO(NormalOpen) or NC(NormalClose) 17 No voltage Output 6/4033 2. Interface Diagram X RT(- )+RT(- )+T+T-R+R- 1234 17 56789101112 LO CKEXIT 13141516 Electric Magnetic Lock Exit Buttion Server Connection (T CP /IP LAN) RED Black ¡Ø Appending Product VCTF 2C Auxiliary Power ¡Û ¡Û +24V / +12V (-) Reader + - T R R- R+ T- T+ X LOCK 5 6 7 8 9 10 11 12 EXIT 13 14 17 16 7/4033 Before system use: How to use buttons Enter button: enables you to select a menu or enter a number. If SBMS is connected, you can use this button for set/release. Esc button: enables you to delete/modify an entered number, to cancel a selection in menu mode, or to go back to a previous menu. To change to attendance mgmt/ attendance & exit (or access) mode, press and hold the button for over two seconds.  If a menu remains unused for more than five seconds, the screen will revert to the previous menu or go into attendance mgmt/access mode.  To select a menu, you can press a corresponding number button. If you see the (▼) symbol at the bottom right of the screen, you can scroll the screen by pressing the "0" button. Signal tones in operation No Type Generated tonesOperations 1 Beep " Beep" Button operation/motion check 2 Beep Error " Bee-beep" Error indication 3 Beep Ready "Bee-reek" Successful entrance 4 Beep OK "Bee-ri-reek" Successful verification and crime prevention setting request in registration When you initially use this product... In this case, the reader has no data for a master (administrator) or a user. Once the installed reader is…

Text truncated - open the document above for the full version.

ONETECH Corp. http://www.onetech.co.kr 505 SK APT Factory, 223-28 Sangdaewon 1-Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do 462-121, Korea [ Tel ] 82-31-746-8500, [ Fax ] 82-31-746-8700 ONETECH October 12, 2004 FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner Reviewing Engineer Re: Request for confidentiality per Section 0.459 of FCC Rules Applicant: S1 Corporation FCC ID: Q54CDR0193X To whom it may concern, Request is hereby submitted, on behalf of my client, S1 Corporation, to withhold from public review certain portions of the application for equipment certification for the referenced FCC identifier. In particular, the following sections of the application and report is requested to be kept confidential: Schematics Rationale for request for confidentiality: S1 Corporation has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the confidential portions of this application to competitors would give them competitive advantage in developing similar products. If you have questions or need further information, please contact the undersigned. Sincerely yours, Y.K. Kwon / Chief Engineer Onetech Corp. Email: [email protected]

1 Helen Zhao Subject:FW: Revised! RE: S1 Corporation, FCC ID: Q54CDR0193X, Assessment NO.: AN04T4276, Notice#2 User_s Manual(CDR-0193X).doc OP By USA Lab.pdfQ54CDR0193X_REP ORT.doc CDR-0193X_CONFI DENTIAL LETTER.... -----Original Message----- From: Y. G. Gwon Sent: Tuesday, October 26, 2004 8:00 PM To: Helen Zhao Subject: Re: Revised! RE: S1 Corporation, FCC ID: Q54CDR0193X, Assessment NO.: AN04T4276, Notice#2 Dear Helen, Thank you for your kind information. Enclosed please find a revised our test report, confidential letter, manual, and operational description. If you have any comments regarding this project, please inform me that. Best Regards, Y.G. Gwon ONETECH Testing & Eval. Lab. > -----Original Message----- > From: Y. G. Gwon > Sent: Monday, October 25, 2004 6:55 PM > To: Helen Zhao > Subject: Re: Revised! RE: S1 Corporation, FCC ID: Q54CDR0193X, > Assessment NO.: AN04T4276, Notice#2 > > > Dear Helen, > > Thank you for your quick response. > Regarding your questions for this project, I would like to answer those at > the bottom of your original text. > If you need more information, please inform me that in detail. > > Have a great week! > > Best Regards, > Y.G. Gwon > ONETECH Testing & Eval. Lab. > > > > > -----Original Message----- > > From: Compliance Certification Services [mailto:[email protected]] > > Sent: Monday, October 25, 2004 3:16 PM > > To: Helen Zhao 2 > > Subject: S1 Corporation, FCC ID: Q54CDR0193X, Assessment NO.: AN04T4276, > > Notice#1 > > > > > > Question #1: Based upon FCC15.31(a), radiated emission measurements below > 30 > > MHz should be made by a loop antenna. But loop antenna was not on the test > > equipment list. Please explain. > ==> I am sorry that. I revised our test report. Enclosed please find that. > > > Question #2: The block diagram and test report indicates that the rated > > supply voltage of the EUT is DC12/24V, but only one set of power line > > conducted emission test data was provided in the report. Please provide > > additional test data and indicate clearly the rated voltage the test data > > are associated with. > ==> We compared difference of test data between 12Vdc and 24Vdc, but we > observed a little difference. So we provided a little worse test data in our > report. > For your reference, the power of the EUT will be supplied by the output of > PBX or UPS, but the section 15.207 requires test data. So we tested the EUT > at each voltage. > > > Question #3: The user manual does not provide any information as what kind > > power source the EUT will come with. Is AC/DC adapter be provided to the > > user? If the AC/DC adapter will be provided to the user, please explain > why DC power supply, instead of a AC/DC adapter, was used during the test. > ==> I request your requirement to our client. After getting that I will send > that to you again. > > > Question #4: Please provide a bandwidth plot to show bandedge compliance. > > ==> I cannot find the bandwidth requirement in the section 15.225. Could > you please inform me why do you need this test data. > (Answer) Based upon 15.215(c), "Intentional radiators operating under the > alternative provisions to the general emission limits, as contained in §§ > 15.217 through 15.257 and in Subpart E of this part, must be designed to > ensure that > the 20 dB bandwidth of the emission is contained within the frequency band > designated in the rule section under which the equipment is operated." For > your information, this is one of the requirements listed on FCC check list. > > > Question #5: Except the functional block diagram, the Operational > > Description contains nothing but the incomplete information that was > > extracted from the user manual. Please provide information based on the > > functional block diagram to explain how the device works. > ==> I will request the document to our client. After getting that, I will > send that to you again. > > > Question #6: This is for your information only. The correct "Equipment of > > Class" should be "DXX". Please also fill in frequency range in unit MHz > > (from 13.56 to 13.56) on the FCC form 731. In future please do not leave > it blank. > > ==> O. K. I will inform that to our colleague. Thanks a lot. > > > > Best regards, > > Helen Zhao > > > > > > The items indicated above must be submitted before processing can continue 3 > > on the above referenced application. Failure to provide the requested > > information within 30 days of the original e-mail date may result in > > application dismissal and forfeiture of the filing fee. Also, please note > > that partial responses increase processing time and should not be > submitted. > > Any questions about the content of this correspondence should be directed > to > > the e-mail address listed below the name of the sender. > > >

FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab.

FCC ID. : Q54CDR0193X Report No.: E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. IDENTIFICATION LABEL: PROPOSED FCC ID LABEL Due to the product size, only the FCC ID shall be permanently affixed to the rear side of the equipment and other information shall be placed in the instruction manual. FCC ID : Q54CDR0193X FCC ID Location FCC ID Location

FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +8…

Text truncated - open the document above for the full version.

Operational Description 1. This system is B-Type attendance & absence system for smart card. Avoiding attendance & absence modification coming from misusage of RF Card of Attendance & Absence Reader, this system uses both card input method and “Card + Fingerprint” input method for user authentication 2. Cooperate by using operating program for attendance & absence management. 3. About B-Type Fingerprint attendance & absence Reader, it is operated as attendance & absence Reader when connected with operating system by using LAN and operated as B-Type Fingerprint Reader for Smart Card only when connected with SBMS. 4. B-Type Fingerprint attendance & absence Reader can use either double authentication method which stores fingerprint into smart card or smart card only method.

Page 1 of 20 FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. ELECTROMAGNETIC EMISSION C OMPLIANCE REPORT FOR LOW-POWER, NON-LICENSED TRANSMITTER Test Report No. : E04OR-041 Applicant : S1 Corporation Address : S1 Bldg., 168, Sunhwa-Dong, Jung-Gu, Seoul Korea 100-130 Manufacturer : S1 Corporation Address : S1 Bldg., 168, Sunhwa-Dong, Jung-Gu, Seoul Korea 100-130 Type of Equipment : RF Card & Fingerprint Terminal FCC ID : Q54CDR0193X Model Name : CDR-0193X Multiple Model Name : CFN-1000 Serial number : N/A Total page of Report : 20 pages (including this page) Date of Incoming : August 10, 2004 Date of Issuing : October 12, 2004 SUMMARY The equipment complies with the requirements of FCC CFR 47 PART 15 SUBPART C, SECTION 15.225. This test report contains only the result of a single test of the sample supplied for the examination. It is not a general valid assessment of the features of the respective products of the mass-production. Prepared by: Reviewed by: G. W. Lee/ Chief Engineer Y. K. Kwon/ Director EMC Div. EMC Div. ONETECH Corp. ONETECH Corp. Page 2 of 20 FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. CONTENTS Page 1. VERIFICATION OF COMPLIANCE .............................................................................................................................4 2. GENERAL INFORMATION............................................................................................................................................5 2.1 PRODUCT DESCRIPTION.................................................................................................................................................5 2.2 MODEL DIFFERENCES:..................................................................................................................................................5 2.3 RELATED SUBMITTAL(S) / GRANT(S)............................................................................................................................5 2.4 TEST SYSTEM DETAILS..................................................................................................................................................6 2.5 TEST METHODOLOGY....................................................................................................................................................6 2.6 TEST FACILITY...............................................................................................................................................................6 3. SYSTEM TEST CONFIGURATION...............................................................................................................................6 3.1 JUSTIFICATION...............................................................................................................................................................6 3.2 EUT EXERCISE SOFTWARE............................................................................................................................................6 3.3 EQUIPMENT MODIFICATIONS........................................................................................................................................6 3.5 ANTENNA REQUIREMENT..............................................................................................................................................7 4. PRELIMINARY TEST ......................................................................................................................................................8 4.1 AC POWER LINE CONDUCTED EMISSIONS TESTS.........................................................................................................8 4.2 RADIATED EMISSIONS TESTS.........................................................................................................................................8 5. FINAL RESULT OF MEASURMENT ............................................................................................................................9 5.1 CONDUCTED EMISSION TEST.........................................................................................................................................9 5.2 FIELD STRENGTH OF THE CARRIER TEST...................................................................................................................11 5.3 SPURIOUS EMISSION TEST...........................................................................................................................................12 5.4 BANDWIDTH OF THE OPERATING FREQUENCY............................................................................................................13 6. FREQUENCY STABILITY WITH TEMPERATURE VARIATION........................................................................15 6.1 OPERATING ENVIRONMENT.........................................................................................................................................15 6.2 TEST SET-UP.................................................................................................................................................................15 6.3 TEST EQUIPMENT USED.........................................................................…

Text truncated - open the document above for the full version.

FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. Conducted Emission Test FCC ID. : Q54CDR0193X Report No. : E04OR-041 It should not reproduced except in full, written approval of ONETECH. FCC-003 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Gyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Gwangju-City, Gyunggi-Do 464-860 Korea. (TEL: +82-31-765-8289, FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. Radiated Emission Test