Q5ETM2210H5DMR Mobile Radio

TM2210 DMR Mobile Radio I TM2210Digital Mobile Radio User Manual Thank you for choosing Taitmobile ra dio. We believe that the pro duct will bri ng much convenience to your work and life. Taitmobile ra dios adopt advanced technology and fine technique. We hope that you will be satisfied with the quality and functions of the pro duct. TM2210 Digital Mobile RadioInstruction Manual II III TM2210 Digital Mobile RadioInstruction ManualTM2210 Digital Mobile RadioInstruction Manual Notice ◆Pl ease re ad the manual care fully beforeusing the pro duct. We consider that you have acquainted with the manual when you start to use the pro duct. ◆Pl ease keep the manual well for furt her re fere nce. ◆To pre vent infri ngement to your legal ri ghts, please fill in the Warranty Cardcare fully and faithfully and acquirea purc hase voucher when you buy the pro duct. ◆The intellectual pro pert y of all part s of the pro duct, including accessori es, is owned by and its authori zed subjects. Without permission ofand such subjects, no copy, extra ction or tra nslation of such part s is allowed. ◆The pro duct is subject to change because of upgra ding or impro vement.re serv es the ri ght to change the specifications of softwareand hardwarementioned in the manual fro m time to time without pri or notification. The specifications and information in the manual is only for your re fere nce. ◆Despite of care ful veri fication, the manual might contain mista kes.re serv es the ri ght of final interp re tation of the manual. Safety Precaution Accord ing to govern mental decre es, it is pro hibited to opera te ra dio tra nsmitters without permission within the are a of its juri sdiction. Vi olation to such stipulations may re sult in penalty or be arrest. Maintenance on the pro duct can be perf ormed only by pro fessional technicians. For safety, it is import ant that a user learn s knowledge of common hazard s in using a ra dio tra nsmitter. Warning: Power off the ra dio in explosive enviro nment with dange ro us gas, dust or mist, for example, when re fueling or park ing at a gas station. TaitTait Tait Tait IV Battery To pre vent fire , personal injury and damage to the ra dio, please abide by the followings. ◆It is suggested to have the ra dio to tra nsmit continuously for 1 minute and re ceive continuously for 4 minutes at most at a time. Tra nsmissions for a long time or continuous opera tion under high power will re sult in overh eat at the back of the ra dio. ◆Never disassemble this ra dio. ◆Keep the ra dio away fro m dire ct sunshine for a long time. Do not place it near a heater. ◆Do not place t he ra dio in a place with a lot of dust, damp or splash of water, or on an unstable surf ace. ◆Power off the ra dio immediately in case it gives out smell or smoke, and then contact the local dealer. 1 CONTENTS 1. UNPACKING ................................................................................................................................ 3 2. OVE RVI EW ................................................................................................................................... 5 2.1 A PPEARANCE ................................................................................................................................. 5 2.2 P ROGRAMMINGKEYS ..................................................................................................................... 6 2.3 I CONS ........................................................................................................................................... 9 2.4 LED I NDICATOR ........................................................................................................................... 11 3. INSTALLATION ........................................................................................................................... 11 4. BASIC FUNCTIONS ..................................................................................................................... 13 4.1 P OWERON/OFF .......................................................................................................................... 13 4.2 S ELECTING AZONE ....................................................................................................................... 14 4.3 S ELECTING ACHANNEL .................................................................................................................. 14 4.4 R EGULATINGVOLUME .................................................................................................................. 15 4.5 V OLUME/CHANNELKNOB ............................................................................................................. 15 4.6 I NITIATING ACALL ........................................................................................................................ 15 4.7 R ECEIVING/REPLYING TO ACALL ..................................................................................................... 16 5. ADVA NCED FUNCTIONS ........................................................................................................... 17 5.1 S HORTMESSAGE ......................................................................................................................... 17 TM2210 Digital Mobile RadioInstruction Manual TM2210 Digital Mobile Radio Instruction Manual 5.2 SCANNINGCHANNELS ................................................................................................................... 19 5.3 E MERGENCYALARM ..................................................................................................................... 22 5.4 CALL LOGS(DIGITALMODEONLY) .................................................................................................. 25 5.5 SETTINGS .................................................................................................................................... 27 5.6 A PPLICATION ...............................................................…

Text truncated - open the document above for the full version.

Kirisun Communication Co.,Ltd. * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter January 7, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: Q5ETM2210H5 FRN: 0008873473 Per section 2.911(d)(7) of the FCC rules, (“ Kirisun Communication Co.,Ltd.”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: Tait North America Inc Physical U.S. Company Address: 1414 Elkmont Dr Wylie, TX 75098 United States Agent name: Mr Mark A Reeves Agent Email Address: [email protected] FRN: 0033506585 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Jessica Wang Printed name: Mr Mark A Reeves Title: Product Manager Title: Senior System Design Engineer Company Name: Kirisun Communication Co.,Ltd. Company Name: Tait North America Inc Date: December 20, 2023 Date: 2023-12-20

Kirisun Communication Co.,Ltd. Covered Equipment Certification Attestation Letter 12/20/2023 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: Q5ETM2210H5 (Kirisun Communication Co.,Ltd. ) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. (Kirisun Communication Co.,Ltd. ) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Jessica Wang Title: Product Manager Company Name: Kirisun Communication Co.,Ltd. Date: 12/20/2023

Kirisun Communication Co.,Ltd. Add: 3rd Floor, Building A, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Tel: 0755-86096055 Attestation letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Kirisun Communication Co.,Ltd. hereby declare that our product: DMR Mobile Radio FCC ID: Q5ETM2210H5 is capable of supporting a voice channel and a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. DMR interphone’s bandwidth is 12.5 kHz, and it has a double time slot, one is the speech time slot, one is the data time slot, just language sequence is satisfied with 4800 bps/6.25 kHz BW. For Part 90 frequency user, the radio is disabled 25kHz channel bandwidth mode by radio firmware at factory in order to comply with FCC mandate for part 90 frequencies. Sincerely, Jessica Wang Signature: 2023-12-20

Differences Declaration To whom concern, We company Kirisun Communication Co.,Ltd. Here by declares: The product model(s) TM2210-H5-BNC, TM2210-H5-MUHF is the same PCB layout, electronic schematic and Antenna with TM2210-H5, which tested in Shenzhen Huatongwei International Inspection Co., Ltd., the only difference is different model names for commercial purpose. Sincerely yours, Name (in print): Jessica Wang Company name: Kirisun Communication Co.,Ltd. Company address: 3rd Floor, Building A, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Tel: 0755-86096055 E-Mail: [email protected]

Kirisun Communication Co.,Ltd. Add: 3rd Floor, Building A, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Tel: 0755-86096055 Extended Frequencies Justification Date: 2023-12-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, The DMR Mobile Radio, LMR with FCC ID: Q5ETM2210H5 was designed to operate in the frequency bands 400MHz~406MHz, 406.1MHz~470MHz. To aid equipment authorization in other countries which accept the United States FCC Grant for certification, Kirisun Communication Co.,Ltd. is requesting that the FCC lists the frequencies 400MHz~406MHz, 406.1MHz~470MHz, under FCC Rules Parts 90 on the FCC Grant. Kirisun Communication Co.,Ltd. attests that the radio will not be marketed to USA users with the frequency band which is not allowed by the rule part 90. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range (MHz) FCC Rule Part 400-406 For Federal 406.1-420 90 420-421 90 421-430 90 430-450 90 450-470 90 470-470 For Federal Sincerely, Signature: Typed or Printed Name: Jessica Wang E‐mail: [email protected]

2023-12-20 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Shenzhen Huatongwei International Inspection Co., Ltd./ 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China / Xu Yang,. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Kirisun Communication Co.,Ltd. / 3rd Floor, Building A, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Agency agreement expiration date: 2024-12-20 By: Jessica Wang Signature Printed Title: Product Manager On behalf of : Kirisun Communication Co.,Ltd. Telephone: 0755-86096055

2023-12-20 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: Q5ETM2210H5 Product Name: DMR Mobile Radio Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description  PCB Layout  PCB Placement  BOM  Tune up These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. By: Jessica Wang Signature Printed Title: Product Manager On behalf of : Kirisun Communication Co.,Ltd. Telephone: 0755-86096055

Report No.: CHTEW23100110 Page: 35 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) 7 EXTERNAL AND INTERNAL PHOTOS 7.1 EXTERNAL PHOTOS Report No.: CHTEW23100110 Page: 36 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09)

Report No.: CHTEW23100110 Page: 37 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) 7.2 INTERNAL PHOTOS Report No.: CHTEW23100110 Page: 38 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) Report No.: CHTEW23100110 Page: 39 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) Report No.: CHTEW23100110 Page: 40 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) 8 APPENDIX REPORT

FCC ID: Q5ETM2210H5 RF Exposure Evaluation 1 TEST CONDITIONS AND RESULTS 1.1. Limit KDB 447498 D04 Interim General RF Exposure Guidance v01 Appendix B Exemptions for Single RF Sources B.3 MPE-based Exemption and B.4 SAR-based Exemption: f is in GHz, d is the separation distance (cm), and ERP20cm is per Formula (B.1). The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength(V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 - - f/300 6 1500–100,000 - - 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 - - f/1500 30 1500–100,000 - - 1.0 30 Note: f = frequency in MHz FCC ID: Q5ETM2210H5 EVALUATION METHOD Transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW, G = gain of antenna in linear scale; Pi = 3.1416, R = distance between observation point and center of the radiator in cm TEST RESULT Passed Not Applicable Radio Type Frequency (MHz) Conducted Power(dBm)* Conducted Maximum Tune-up(dBm) Ant Gain(dBi) Maximum ERP/EIRP (dBm) Maximum ERP/EIRP (mW) Minimum Separation Distance(cm) Pth (mW) Bluetooth 2480 7.75 8.00 2.00 10.00 10.00 1.0 10.39 Radio Type Frequency (MHz) Conducted Average Power (dBm)* Maximum Tune-up (dBm) r (m) Power Density (mW/cm2) Limit (mW/cm2) Result PMR 400.025 44.3 44.5 0.42 1.271 1.333 Pass PMR 435.000 44.4 44.5 0.40 1.402 1.450 Pass PMR 469.975 44.3 44.5 0.38 1.553 1.567 Pass Note: 1) r is the distance from observation point to the antenna which is declared by the applicant. 2) *: refer to the RF report. 3) Antenna Gain is 0dBi. If the gain of the antenna is 0dBi, the separation distance is at least 0.42m from body and the antenna, so meet this standard requirement. FCC ID: Q5ETM2210H5 1.2. Measurement Procedure 1. Polarization of the EUT’s antenna was vertical, which is its polarization in actual use. 2. The EUT at the chosen modulation was set to transmit at the chosen frequency at maximum RF power and at 50% duty cycle (50% duty cycle is simulated either by lowering the radio’s power by 3dB or by using a 3 dB pad on the output of the radio). During preliminary measurements, we set the distance between the power density probe and the investigated EUT’s antenna equal to the average calculated Rsafe applicable either for controlled or uncontrolled environments. 3. Power density measurements were taken at different heights of the probe from the ground (0.1 to 2 meters) while rotating versus azimuth (from 0° to 360°) the antenna. 4. The azimuth between the probe and the antenna position corresponding to the highest MPE level was chosen as the “worst case” position for the final measurements. 5. For the final measurements, we adjusted the distance between the test probe and the tested antenna to the real safe distance, Rreal, such that the measured highest power density in the “worst case” position was the same or slightly less than the test limit. 6. The measurement results of final measurements conducted at the chosen azimuth and different heights of the probe above the ground. 7. Average values of power density were calculated for the imaginary whole human body (0.1–2.0 m), for the lower part of the body (0.1–0.9 m) and for the upper part of the body (1.0–2.0 m). FCC ID: Q5ETM2210H5 1.3. Test Results EME Data: Measuring Antenna Height(cm) FCC Part 2.1091 Controlled RF Exposure(mW/cm 2 ) 0dBi Antenna 42.00cm 0dBi Antenna 52.00cm 0dBi Antenna 62.00cm 10 0.21 0.18 0.16 20 0.40 0.28 0.23 30 0.62 0.53 0.42 40 0.80 0.64 0.55 50 0.90 0.70 0.61 60 0.94 0.92 0.78 70 0.98 0.97 0.85 80 0.95 0.90 0.72 90 0.93 0.86 0.74 100 0.91 0.80 0.77 110 0.82 0.77 0.72 120 0.78 0.75 0.67 130 0.73 0.62 0.50 140 0.62 0.50 0.38 150 0.50 0.46 0.34 160 0.42 0.30 0.28 170 0.30 0.24 0.23 180 0.27 0.20 0.18 190 0.24 0.16 0.14 200 0.18 0.14 0.12 EME for Body Parts: Part of the body/averaging points(m) FCC Part 2.1091 Controlled RF Exposure 0dBi Antenna 42.00cm (mW/cm 2 ) Whole body (0.1 to 2.0 ) 0.98 Lower body (0.1 to 0.9) 0.98 Upper body (1.0 to 2.0 ) 0.91 1.4. Conclusion The User Manual shall include RF radiation safety warnings: The antenna of this device must be installed on the roof or trunk of the vehicle. If the gain of the used antenna is 0dBi, the minimum mobile separation distance Rsafe =42.00cm. FCC ID: Q5ETM2210H5 2 TEST SETUP PHOTOS OF THE EUT

Page: 1 of 40 TEST REPORT Report No. ....................................... : CHTEW23100110 Report verification: Project No. ................................. : SHT2309011206EW FCC ID ............................................ : Q5ETM2210H5 Applicant’s name ........................... : Kirisun Communication Co.,Ltd. Address.............................................: 3rd Floor, Building A, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Product name ................................. : DMR Mobile Radio Trade Mark ....................................... : TAIT Model No. ......................................... : TM2210-H5 Listed Model(s) ................................. : TM2210-H5-BNC, TM2210-H5-MUHF Standard .......................................... : FCC CFR Title 47 Part 90 Date of receipt of test sample.........: Sep.13, 2023 Date of testing.............................: Sep.18, 2023- Oct.27, 2023 Date of issue...............................: Oct.31, 2023 Result ................. ........................: PASS Compiled by (Position-Printed name-Signature) : File administrators Caspar Chen Supervised by (Position-Printed name-Signature) : Project Engineer Caspar Chen Approved by (Position-Printed name-Signature) : RF Manager Xu Yang Testing Laboratory Name .............. : Shenzhen Huatongwei International Inspection Co., Ltd. Address ............................................ : Building 7, Baiwang Idea Factory, No.1051, Songbai Road, Yangguang Community, Xili Subdistrict, Nanshan District, Shenzhen, Guangdong, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report merely correspond to the test sample. Report No.: CHTEW23100110 Page: 2 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) Contents 1 T E S T S T A N D A R D S A N D RE P O R T V E R S I O N 3 1.1. Test standard 3 1.2. Report revised information 3 2 T E S T D E S C R I P T I O N 4 3 S U M M A R Y 5 3.1 Client information 5 3.2 Product description 5 3.3 Radio Specification Description *1 5 3.4 Testing laboratory information 6 4 T E S T C O N F I G U R A T I O N 7 4.1 Test frequency list 7 4.2 Operation mode 7 4.3 Support unit used in test configuration and system 8 4.4 Testing environmental condition 9 4.5 Measurement uncertainty 9 4.6 Equipment used during the testing 10 5 T E S T C O N D I T I O N S A N D R E S U L T S 12 5.1 Conducted carrier output power 12 5.2 99% occupied bandwidth & 26dB bandwidth 13 5.3 Emission mask 15 5.4 Modulation limit 17 5.5 Audio frequency response 18 5.6 Frequency stability VS temperature 20 5.7 Frequency stability VS voltage 21 5.8 Transmitter frequency behavior 22 5.9 Transmit conducted spurious emission 24 5.10 Transmitter radiated spurious emission 25 6 T E S T S E T U P P H O T O S 34 7 E X T E R N A L A N D I N T E R N AL P H O T O S 35 7.1 E X T E R N A L P H O T O S 35 7.2 I N T E R N A L P H O T O S 37 8 A P P E N D I X R E P O R T 40 Report No.: CHTEW23100110 Page: 3 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) 1 TEST STANDARDS AND REPORT VERSION 1.1. Test standard The tests were performed according to following standards: FCC Rules Part 90: Private land mobile radio services. FCC Rules Part 2: Frequency allocations and radio treaty matters; General rules and regulations ANSI C63.26-2015: American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services ANSI/TIA-603-E-2016: Land Mobile FM or PM Communications Equipment and Performance Standards ANSI C63.4-2014: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz 1.2. Report revised information Revised No. Date of issued Description N/A 2023-10-31 Original Report No.: CHTEW23100110 Page: 4 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) 2 TEST DESCRIPTION Section Test Item Section Result Test Engineer 5.1 Conducted carrier output power Part 90.205 Part 2.1046(a) Pass Caspar Chen 5.2 99% occupied bandwidth & 26dB bandwidth Part 90.209 & 210 Part 2.1049 Pass Caspar Chen 5.3 Emission mask Part 90.209 & 210 Part 2.1049 Pass Caspar Chen 5.4 Modulation limit Part 2.1047(b) Pass Caspar Chen 5.5 Audio frequency response Part 2.1047(a) Pass Caspar Chen 5.6 Frequency stability VS temperature Part 90.213 Part 2.1055 Pass Caspar Chen 5.7 Frequency stability VS voltage Part 90.213 Part 2.1055 Pass Caspar Chen 5.8 Transient frequency behavior Part 90.214 Pass Caspar Chen 5.9 Transmit conducted spurious emission Part 90.210 Part 2.1051 Pass Caspar Chen 5.10 Transmit radiated spurious emission Part 90.210 Part 2.1053 Pass Yifan Wang Note: The measurement uncertainty is not included in the test result. Report No.: CHTEW23100110 Page: 5 of 40 Issued: 2023-10-31 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V06(2023-09) 3 SUMMARY 3.1 Client information Applicant: Kirisun Communication Co.,Ltd. Address: 3rd Floor, Building A, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China Manufacturer: Kirisun Communication Co.,Ltd. Address: 3rd Floor, Building A, Tongfang Information Habour, No.11 Langshan Road, Nanshan District, Shenzhen 518057, P.R.China 3.2 Product description Main unit information: Prod…

Text truncated - open the document above for the full version.

Appendix Report FCC PART 90 Test Form QRE315 V 3.1 (2019-11) Appendix clause Test Result (PASS/FAIL) APASS BPASS CPASS DPASS EPASS FPASS GPASS HPASS IPASS Auditor YPHT23090112001 Model No. TM2210-H5 2023/10/11 Finish date 2023/10/25 Frequency Stability Test & Temperature Frequency Stability Test & Voltage Test sample No. Start test date Emission Mask 49% Test Item Test date （M/D) Maximum Transmitter Power Temperature 23.9°C Humidity Test Engineer Project No. SHT2309011206EW 10/25 Transmitter Frequency Behavior Spurious Emission On Antenna Port 10/25 10/25 10/25 10/25 10/25 10/25 10/25 10/25 Modulation Limit Audio Frequency Response Occupied Bandwidth Appendix Page:1 of 25 Project No.:SHT2309011206EW Appendix A:Maximum Transmitter Power Operation Mode Modulatio n Type Test Channel Measured Power(dBm ) Measured Power(W) Rated Power(W) Percentage(% ) Limit (%)Result TX-DNH4FSK CH L 44.326.9225.007.7±20PASS TX-DNH4FSK CH M 44.427.5425.0010.2±20PASS TX-DNH4FSK CH H 44.326.9225.007.7±20PASS TX-DNL4FSK CH L 40.410.9610.009.6±20PASS TX-DNL4FSK CH M 40.210.4710.004.7±20PASS TX-DNL4FSK CH H 40.711.7510.0017.5±20PASS TX-ANHFM CH L 44.226.0025.004.0±20PASS TX-ANHFM CH M 43.924.5525.00-1.8±20PASS TX-ANHFM CH H 44.125.7025.002.8±20PASS TX-ANLFM CH L 40.310.6410.006.4±20PASS TX-ANLFM CH M 39.58.9910.00-10.1±20PASS TX-ANLFM CH H 40.310.7210.007.2±20PASS Appendix Page:2 of 25 Project No.:SHT2309011206EW Appendix B:Occupied Bandwidth 99%(kHz)26dB(kHz) TX-DNH4FSK CH L 6.3908.922 ≤11.25 PASS TX-DNH4FSK CH M 6.5779.325 ≤11.25 PASS TX-DNH4FSK CH H 6.3668.657 ≤11.25 PASS TX-DNL4FSK CH L 6.2158.568 ≤11.25 PASS TX-DNL4FSK CH M 6.4769.006 ≤11.25 PASS TX-DNL4FSK CH H 6.3489.122 ≤11.25 PASS TX-ANHFM CH L 9.90010.140 ≤11.25 PASS TX-ANHFM CH M 9.88910.140 ≤11.25 PASS TX-ANHFM CH H 5.28610.120 ≤11.25 PASS TX-ANLFM CH L 9.89710.140 ≤11.25 PASS TX-ANLFM CH M 9.88910.130 ≤11.25 PASS TX-ANLFM CH H 7.56710.130 ≤11.25 PASS Operation Mode Test Channel Occupied Bandwidth 99% Limit(kHz) Result Modulation Type Appendix Page:3 of 25 Project No.:SHT2309011206EW Appendix B:Occupied Bandwidth Operation Mode Modulation Type Test Channel TX-DNH4FSK CH L TX-DNH4FSK CH M TX-DNH4FSK CH H TEST PLOT RESULT Appendix Page:4 of 25 Project No.:SHT2309011206EW Appendix B:Occupied Bandwidth Operation Mode Modulation Type Test Channel TEST PLOT RESULT TX-DNL4FSK CH L TX-DNL4FSK CH M TX-DNL4FSK CH H Appendix Page:5 of 25 Project No.:SHT2309011206EW Appendix B:Occupied Bandwidth Operation Mode Modulation Type Test Channel TEST PLOT RESULT TX-ANHFM CH L TX-ANHFM CH M TX-ANHFM CH H Appendix Page:6 of 25 Project No.:SHT2309011206EW Appendix B:Occupied Bandwidth Operation Mode Modulation Type Test Channel TEST PLOT RESULT TX-ANLFM CH L TX-ANLFM CH M TX-ANLFM CH H Appendix Page:7 of 25 Project No.:SHT2309011206EW Appendix C:Emission Mask Operation Mode Modulatio n Type Test Channel TEST PLOT RESULT TX-DNH4FSK CH L TX-DNH4FSK CH L TX-DNH4FSK CH M Appendix Page:8 of 25 Project No.:SHT2309011206EW Appendix C:Emission Mask Operation Mode Modulatio n Type Test Channel TEST PLOT RESULT TX-DNH4FSK CH M TX-DNH4FSK CH H TX-DNH4FSK CH H Appendix Page:9 of 25 Project No.:SHT2309011206EW Appendix C:Emission Mask Operation Mode Modulatio n Type Test Channel TEST PLOT RESULT TX-DNL4FSK CH L TX-DNL4FSK CH L TX-DNL4FSK CH M Appendix Page:10 of 25 Project No.:SHT2309011206EW Appendix C:Emission Mask Operation Mode Modulatio n Type Test Channel TEST PLOT RESULT TX-DNL4FSK CH M TX-DNL4FSK CH H TX-DNL4FSK CH H Appendix Page:11 of 25 Project No.:SHT2309011206EW Appendix C:Emission Mask Operation Mode Modulatio n Type Test Channel TEST PLOT RESULT TX-ANHFM CH L TX-ANHFM CH L TX-ANHFM CH M Appendix Page:12 of 25 Project No.:SHT2309011206EW Appendix C:Emission Mask Operation Mode Modulatio n Type Test Channel TEST PLOT RESULT TX-ANHFM CH M TX-ANHFM CH H TX-ANHFM CH H Appendix Page:13 of 25 Project No.:SHT2309011206EW Appendix C:Emission Mask Operation Mode Modulatio n Type Test Channel TEST PLOT RESULT TX-ANLFM CH L TX-ANLFM CH L TX-ANLFM CH M Appendix Page:14 of 25 Project No.:SHT2309011206EW Appendix C:Emission Mask Operation Mode Modulatio n Type Test Channel TEST PLOT RESULT TX-ANLFM CH M TX-ANLFM CH H TX-ANLFM CH H Appendix Page:15 of 25 Project No.:SHT2309011206EW Appendix D:Modulation Limit 300Hz1004Hz1500Hz2500 Hz TX-ANHFM CH M -200.1050.1870.2690.4312.5PASS TX-ANHFM CH M -150.1280.3040.4490.752.5PASS TX-ANHFM CH M -100.1710.5050.7761.3172.5PASS TX-ANHFM CH M -50.2730.861.3291.9512.5P…

Text truncated - open the document above for the full version.