Q5ETP620Two Way Radio

TP620 Digital Portable Radio Quick Instruction Manual II FCC ID:Q5ETP620 II Quick Instruction Manual TP620 We are very grateful for your purchasing KIRISUN brand two-way radios produced by Kirisun Communications Co., Ltd. We believe KIRISUN two-way radio, which always incorporates the latest technology, can bring great convenience to your life and work. We also believe that the quality and function of KIRISUN two-way radio can meet your demands for reliable communication. Quick Instruction Manual Frequency:400-470MHz 1 Declaration of Conformity CE0700! We, Kirisun Communications Co.,Ltd. 3-6Flrs, ROBETA Building, No.1, QiMin Road, Song Ping Shan Area, Science&Industry Park, Nanshan District Shenzhen 518057 P.R. China Declare on our sole responsibility that this equipment complies with the Annex IV of Council Directive 1999/5/EC on radio equipment and telecommunications equipment and the mutual recognition of their conformity, and that any applicable Essential Test Suits measurement has been performed. Description of equipment: UHF DMR Portable Model No.: Kirisun/TP620 This compliances is based on conformity with the following harmonized standards or documents: （1）.ETSI EN 300 086-2 V1.3.2 ETSI EN 300 113-2 V1.5.1 (2). ETSI EN 301 489-1 V1.9.2(2011-09) ETSI EN 301 489-5 V1.3.1(2002-08) (3) EN 60950-1:2006+A11:2009+A1:2010+A12:2011 Quick Instruction Manual TP620 Digital Portable Radio Quick Instruction Manual 2 (4) EN 50385:2002 FCC We, Kirisun Communications Co.,Ltd. 3-6Flrs, ROBETA Building, No.1, QiMin Road, Song Ping Shan Area, Science&Industry Park, Nanshan District Shenzhen 518057 P.R. China Declare on our sole responsibility that this equipment complies with the FCC Part15 rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct. The interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is 3 connected. ● Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1.This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note:” Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” 1. Safety Before using this radio, read this operating instruction carefully for safe and convenient usage. This product can only be maintained by the professional technicians. Do not disassemble the radio by yourself. To avoid of the problems caused by electromagnetic interference or electromagnetic compatibility, turn off the radio in any facilities where posted notices instruct you to do so, such as hospital and other health care facilities. And when on board an aircraft, turn off the radio if instructed to do so too. Quick Instruction Manual 4 In the vehicle with an air bag, do not place the radio in the area over an air bag or in the air bag deployment area. Turn off the radio before entering any area with a potentially explosive atmosphere or blasting caps. Do not operate the radio, disassemble or charge the battery in the potentially flammable and explosive atmosphere (such as gas station, coal gas station, etc.). Do not place the radio under the direct sunlight or near the area with heating devices. Do not place the radio in the area with great dust, moisture or drips, or on the unstable surface. Contact us or your local dealer for help if you want to redevelop or modify the radio. Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Make sure the antenna is correctly installed when using. The radio without antenna may cause damage in the process of transmission. 2. First Use 2.1 Unpacking and Checking „ Standard Accessories Please unpack carefully and check all the items listed in the following table before discarding the Quick Instruction Manual 5 packing material. If any damage or loss occurs during shipment, please contact your dealer. Item Quantity Antenna 1 Belt Clip 1 Charger 1 Battery 1 Hand Strap 1 Power Adapter 1 Instruction Manual 1 2.2 Product Overview „ Identification of buttons Battery Antenna Charger Hand strap Power Adapter Belt Clip andScrews Quick Instruction Manual 6 No Part Name No Part Name 1 LED Indicator 5 Side Button1 2 Power/Volume Switch 6 Side Button2 3 Channel Knob 7 Top Button 4 PTT Button 8 External speaker / microphone interface Quick Instruction Manual 7 „ Programmable Buttons Authorized Dealer can program the programmable buttons as shortcuts to various radio features. Each button can has two features and can be activated through Long Press or Short Press. „ LED Status Indicator The LED indicator shows the operational status of your radio. Solid red – Radio is transmitting Solid green- Radio is powering up or receiving a non-privacy-enabled call or data, or detecting activity over the air. 2.3 Preparing your product for use „ Charging the Battery Note： Short Press – Pressing and releasing quickly Long press – Pressing and holding for the programmed duration Quick Instruction Manual 8 Please refer to the following steps to charge your batter. 1) Plug the adaptor in the rear power jack of th…

Text truncated - open the document above for the full version.

Kirisun Communications Co., Ltd 3-6F ROBETA Building, No. 1, QiMin Road,Song Ping Shan A rea,Science & Industry Park,Nanshan District Shenzhen,China Tel: 755-8609 6055 Fax: 755-8609 6018 Sep.17.2014 To: Federal Communication Commission Authorization and Evaluation Division Subject: Attestation statement regarding the Land Mobile Radio frequency TYPE OF QEUIPMENT: Licensed Non-Broadcast Transmitter Held to Face FCC ID: Q5ETP620 Dear Sir or Madam I attest that the product has one antenna, one battery capacity and one body- worn and audio accessories. And that the product could program the frequence on computer through interface by manufacturer, is incapable of tuning, or readily being altered, by the end-user. Please contact the undersigned if you have any questions or need any further information. Regards Kirisun Communications Co., Ltd Signature: Name, Job Title and Dept.: Chen Xin / Manager

Sep.17, 2014 Federal Communication Commission Authorization and Evaluation Division FCC ID: Q5ETP620 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Parts List 4.Operational Description 5.Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Kirisun Communications Co., Ltd Contact person: Chen Xin Title: Manager

External Photos TOTAL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

Internal Photos OPEN VIEW-1 OF EUT OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT

FCC ID APPLIC Produc Brand Model Client Date of STAND REPOR A CAUTIO This rep laborato CATION PUR ct Designati Name Name f Issue DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA Re : RPOSE : ion : : : : : : : tion of G ot be repro all not be q R Te port No.:A Q5ETP62 Original E DMR Tw o Kirisun TP620 Kirisun C o Sep. 26,2 0 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o est AGC0060 0 Equipment o Way Radio ommunicatio 014 1528:2003 2.1093 SI C95.1 Complia cept in full w of context. Rep 7140802 ons Co., Ltd ance(Sh without the port FH01 henzhen e written p t n) Co., L ermission Page 1 o Ltd. of the test of 102 Report No.:AGC00607140802FH01 Page 2 of 102 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 26,2014 Valid Original Report App App Man Man Prod Bran Mod Diffe EUT App Te st Perf Rep plicant Name plicant Addre nufacturer N nufacturer A duct Name nd Name del Name erence Desc T Voltage plicable Stan t Date formed Loca port Templat e ess Name Address cription ndard ation te Tes Kirisu 3-6Flr Indust Kirisu 3-6Flr Indust DMR T Kirisun TP620 N/A DC7.4 IEEE 47CF IEEE / Aug. 2 Attest 2F, Bu Street AGCR Teste Check e Authoriz st Rep n Communi rs, ROBETA try Park, Na n Communi rs, ROBETA try Park, Na Two Way Ra n 0 4 V by batte Std. 1528:2 R § 2.1093 /ANSI C95.1 27,2014 tation of Glo uilding 2, No t, Bao'an Dis RT-US-PTT/ d By ed By zed By port C cations Co., A Building, N anshan Distr cations Co., A Building, N anshan Distr adio ry 003 1 obal Complia o.1-No.4, Ch strict, Shenz /SAR (2014- Eric Zh Angela Solger Z Certific , Ltd o.1, QiMin R rict , Ltd o.1,QiMin R rict ance (Shenz haxi Sanwei zhen, China -04-01) hou a Li hang Report cation Road, Song Road, Song P zhen)Co., Ltd i Technical I Sep. 26,201 Sep. 26,201 Sep. 26,201 t No.:AGC00 n Ping Shan A Ping Shan A d. ndustrial Pa 4 4 4 0607140802 Page 3 o Area,Scienc Area,Science ark, Gushu, FH01 of 102 ce & e & Xixiang Report No.:AGC00607140802FH01 Page 4 of 102 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 6 2.1. EUT Description .................................................................................................................................... 6 2.2. Test Procedure ...................................................................................................................................... 7 2.3. Test Environment ................................................................................................................................... 7 3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 8 3.1. Specific Absorption Rate (SAR) ............................................................................................................. 8 3.2. SAR Measurement Procedure ............................................................................................................... 9 3.3. COMOSAR System Description .......................................................................................................... 10 3.4. COMOSAR E-Field Probe ................................................................................................................... 12 3.5. Isotropic E-Field Probe Specification .................................................................................................... 12 3.6. Robot .................................................................................................................................................. 12 3.7. Video Positioning System .................................................................................................................... 13 3.8. Device Holder...................................................................................................................................... 13 3.9. SAM Twin Phantom ............................................................................................................................. 14 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 15 4.1. The composition of the tissue simulating liquid ..................................................................................... 15 4.2. Tissue Calibration Result ..................................................................................................................... 16 4.3. Tissue Dielectric Parameters for Head and Body Phantoms ................................................................. 17 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 18 5.1. SAR System Validation Procedures ..................................................................................................... 18 5.2. SAR System Validation ........................................................................................................................ 19 6. EUT TEST POSITION ................................................................................................................................... 21 6.1. Body Worn Position ............................................................................................................................. 21 7. SAR EXPOSURE LIMITS ............................................................................................................................ 22 8. TEST EQUIPMENT LIST ............................................................................................................................. 23 9. MEASUREMENT UNCERTAINTY ..............................................................................…

Text truncated - open the document above for the full version.

Report No.:AGC00607140802FH01 Page 77 of 102 EUT PHOTOGRAPHS TOTAL VIEW OF EUT TOP VIEW OF EUT Report No.:AGC00607140802FH01 Page 78 of 102 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.:AGC00607140802FH01 Page 79 of 102 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.:AGC00607140802FH01 Page 80 of 102 RIGHT VIEW OF EUT OPEN VIEW-1 OF EUT Report No.:AGC00607140802FH01 Page 81 of 102 OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT Report No.:AGC00607140802FH01 Page 82 of 102 INTERNAL VIEW-2 OF EUT Report No.:AGC00607140802FH01 Page 83 of 102 APPENDIX D. PROBE CALIBRATION DATA Report No.:AGC00607140802FH01 Page 84 of 102 Report No.:AGC00607140802FH01 Page 85 of 102 Report No.:AGC00607140802FH01 Page 86 of 102 Report No.:AGC00607140802FH01 Page 87 of 102 Report No.:AGC00607140802FH01 Page 88 of 102 Report No.:AGC00607140802FH01 Page 89 of 102 Report No.:AGC00607140802FH01 Page 90 of 102 Report No.:AGC00607140802FH01 Page 91 of 102 Report No.:AGC00607140802FH01 Page 92 of 102 Report No.:AGC00607140802FH01 Page 93 of 102 APPENDIX E. DIPOLE CALIBRATION DATA Report No.:AGC00607140802FH01 Page 94 of 102 Report No.:AGC00607140802FH01 Page 95 of 102 Report No.:AGC00607140802FH01 Page 96 of 102 Report No.:AGC00607140802FH01 Page 97 of 102 Report No.:AGC00607140802FH01 Page 98 of 102 Report No.:AGC00607140802FH01 Page 99 of 102 Report No.:AGC00607140802FH01 Page 100 of 102 Report No.:AGC00607140802FH01 Page 101 of 102 Report No.:AGC00607140802FH01 Page 102 of 102

Page 1 of 74 FCC Part 90 Rules Test Report Report No.: AGC00607140802FE10 FCC ID : Q5ETP620 PRODUCT DESIGNATION : DMR Two Way Radio BRAND NAME : Kirisun MODEL NAME : TP620 CLIENT : Kirisun Communications Co., Ltd. DATE OF ISSUE : Sep.05, 2014 STANDARD(S) : FCC Part 90 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00607140802FE10 Page 2 of 74 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep.05, 2014Valid Original Report Report No.: AGC00607140802FE10 Page 3 of 74 VERIFICATION OF COMPLIANCE Applicant: Kirisun Communications Co., Ltd. 3-6Flrs, ROBETA Building, No.1, QiMin Road, Song Ping Shan Area, Science & Industry Park, Nanshan District Manufacturer: Kirisun Communications Co., Ltd. 3-6Flrs, ROBETA Building, No.1, QiMin Road, Song Ping Shan Area, Science & Industry Park, Nanshan District Product Designation: DMR Two Way Radio Brand Name: Kirisun Model Name: TP620 Date of Test: Aug.27, 2014 to Sep.04, 2014 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2009. The sample tested as described in this report is in compliance with the FCC Rules Part 90 requirements The test results of this report relate only to the tested sample identified in this report. Tested by Freddie Duan Sep.05, 2014 Checked By Kidd Yang Sep.05, 2014 Authorized By Solger Zhang Sep.05, 2014 Report No.: AGC00607140802FE10 Page 4 of 74 TABLE OF CONTENTS 1. GENERAL INFORMATION ......................................................................................................................... 6 1.1 PRODUCT DESCRIPTION ........................................................................................................................... 6 1.2 RELATED SUBMITTAL(S) / GRANT (S) ......................................................................................................... 7 1.3 TEST METHODOLOGY .............................................................................................................................. 7 1.4 TEST FACILITY ........................................................................................................................................ 7 1.5 SPECIAL ACCESSORIES ........................................................................................................................... 7 1.6 EQUIPMENT MODIFICATIONS .................................................................................................................... 7 2. SYSTEM TEST CONFIGURATION ............................................................................................................ 8 2.1 EUT CONFIGURATION .............................................................................................................................. 8 2.2 EUT EXERCISE ....................................................................................................................................... 8 2.3 GENERAL TECHNICAL REQUIREMENTS ...................................................................................................... 8 2.4 CONFIGURATION OF TESTED SYSTEM ...................................................................................................... 9 3. SUMMARY OF TEST RESULTS ............................................................................................................... 10 4. DESCRIPTION OF TEST MODES ............................................................................................................ 11 5. CONDUCTED LIMITS ............................................................................................................................... 12 5.1 PROVISIONS APPLICABLE ............................................................................................................... 12 5.2 MEASUREMENT PROCEDURE ........................................................................................................ 12 5.3 TEST SETUP BLOCK DIAGRAM ....................................................................................................... 13 5.4 TEST EQUIPMENT USED ......................................................................................................................... 13 5.5 TEST RESULT .................................................................................................................................... 14 6. FREQUENCY TOLERANCE .................................................................................................................... 16 6.1 PROVISIONS APPLICABLE ....................................................................................................................... 16 6.2 MEASUREMENT PROCEDURE ................................................................................................................. 16 6.3T EST EQUIPMENT USED: ......................................................................................................................... 17 6.4T EST RESULT ......................................................................................................................................... 18 7. EMISSION BANDWIDTH .......................................................................................................................... 24 7.1 PROVISIONS APPLICABLE ....................................................................................................................... 24 7.2 MEASUREMENT PROCEDURE ................................................................................................................. 24 7.3 TEST SETUP BLOCK DIAGRAM ...................................................................…

Text truncated - open the document above for the full version.

APPENDIX IV PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION TEST SETUP CONDUCTED EMISSION TEST SETUP