Q5K60232TR/C Catapult

External Photos

Label and Location

Internal Photos

Operation Description for R/C Catapult (49MHz) The transmitter for R/C Catapult is powered by 1 x 9V size battery. The radio frequency channel is 49.860MHz. There are two control sticks and one button on the EUT. When the control stick is pushed or the button is pressed, the EUT will transmit different radio control signal to the receiver. Referring to the transmitter circuit design, the circuit description is listed below: - U1 and its associated circuit act as an encoder and a RF amplifier. - Y1 and its associated circuit act as an oscillator. - Q1, D2 and its associated circuit act as a voltage regulator.

TEST REPORT Report No. : AJ014002-001 Date : 2007 June 20 Page 1 of 11 FCC ID: Q5K60232T This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Application No. : LJ212111(8) Applicant : K & B Intíl Ltd. Room 406, 4/F., Empire Centre, 68 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Sample Description : One(1) submitted sample(s) stated to be R/C Catapult of Model No. 60232 Radio Frequency : 49.860 Transmitter Rating : 1 x 9V size battery No. of submitted sample : One (1) piece(s) *** Date Received : 2007 May 22 Test Period : 2007 May 31 ñ 2007 June 07 Test Requested : FCC Part 15 Certification. Test Method : 47 CFR Part 15 (10-1-05 Edition) ANSI C63.4 ñ 2003 Test Result : See attached sheet(s) from page 2 to 11. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart C. For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : ____________________________________________________ Danny Chui Deputy Manager - EL. Division TEST REPORT Report No. : AJ014002-001 Date : 2007 June 20 Page 2 of 11 FCC ID: Q5K60232T This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Table of Contents 1 General Information .............................................................................................................................3 1.1 General Description .....................................................................................................................3 1.2 Location of the test site ................................................................................................................4 1.3 List of measuring equipment........................................................................................................5 2 Description of the radiated emission test .............................................................................................6 2.1 Test Procedure..............................................................................................................................6 2.2 Test Result....................................................................................................................................6 2.3 Radiated Emission Measurement Data ........................................................................................7 3 Description of the Line-conducted Test...............................................................................................8 3.1 Test Procedure..............................................................................................................................8 3.2 Test Result....................................................................................................................................8 3.3 Graph and Table of Conducted Emission Measurement Data .....................................................8 4 Photograph ...........................................................................................................................................9 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission ......................9 4.2 Photographs of the External and Internal Configurations of the EUT.........................................9 5 Supplementary document ...................................................................................................................10 5.1 Bandwidth ..................................................................................................................................10 5.2 Duty cycle ..................................................................................................................................10 5.3 Transmission time ......................................................................................................................10 6 Appendices .........................................................................................................................................11 TEST REPORT Report No. : AJ014002-001 Date : 2007 June 20 Page 3 of 11 FCC ID: Q5K60232T This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1 General Information 1.1 General Description The equipment under test (EUT) is a transmitter for R/C Catapult. It operates at 49.860MHz and the oscillation of radio control is generated by a crystal. The EUT is powered by 1 x 9V size battery. There are two control sticks and one button on the EUT. When the control stick is pushed or the button is pressed, the EUT will transmit different control signal to the receiver. The brief circuit description is listed as follows: - U1 and associated circuit act as an encoder and a RF amplifier. - Q1, D2 and associated circuit act as a voltage regulator. - Y1 and associated circuit act as an oscillator. TEST REPORT Report No. : AJ014002-001 Date : 2007 June 20 Page 4 of 11 FCC ID: Q5K60232T This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1.2 Location of the test site Rad…

Text truncated - open the document above for the full version.

Job No. WF-EL-EMC-15 Edition 1 2006 April 12 Page of Bandwidth Plot Bandwidth 1

Job No. WF-EL-EMC-15 Edition 1 2006 April 12 Page of Duty Cycle Duty Cycle 1 Duty Cycle 2 Job No. WF-EL-EMC-15 Edition 1 2006 April 12 Page of Duty Cycle Duty Cycle 3

Test Setup Photos