Q6WBT039001Antenna

DS-1 / DS-3 / DS-4 (1-Way) DS-7 (2-Way Paging) DS-00 (ADD-ON MODULE) DATA START SYSTEMS INSTALLATION INSTRUCTIONS CONGRATULATIONS on your choice of a Data Start™ Remote Engine Starter and Keyless Entry with Data Port Technology by Crimestopper Security Products Inc. This system is designed to be used in conjunction with a Databus Bypass Module and WILL NOT work by itself as a stand alone remote starter. This booklet contains the information necessary for installing your system. Note: Some features will not be available on units with 1 button, 3 button, and 4 button remotes. DISCLAIMER: This installation book is designed for the installer or individual with an existing understanding of automotive electrical systems, along with the ability to test and connect wires for proper operation. To ease installation, we suggest that you READ THIS MANUAL before beginning your installation. This book is provided as a GENERAL GUIDELINE and the information contained herein may differ from your vehicle. Crimestopper Security Products, Inc. and its’ vendors shall not be liable for any accident resulting from the use of this product. This system is designed to be professionally installed into a vehicle in which all systems and associated components are in perfect working condition. TECHNICAL SUPPORT: (800) 998-6880 Monday - Friday 8:00am - 4:30pm Pacific Std. Time Web Site: www.crimestopper.com E-mail: [email protected] CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 S. TAPO STREET, SIMI VALLEY, CA. 93063 REV 08-2012 This device complies with FCC Rules part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification could void the user’s authority to use the equipment. BTR039A 2 TABLE OF CONTENTS Pre-Installation Considerations..................................................................................................................2 Installation Cautions & Warnings...............................................................................................................3 5 Pin Power Plug....................................................................................................................................3 Optional 8 Pin Plug...............................................................................................................................4-5 AUX Channel Output (Trunk release, Dome light or Hornhonk)......................................................................5 Door Lock Diagrams................................................................................................................................6 Smart TachlessMode...............................................................................................................................7 Tach Programming Options......................................................................................................................8 Option Programming Table.............. .......................................................................................................8-9 Option Descriptions...........................................................................................................................11-15 Antenna Diagram.................................................................................................................................15 Trans mitter Progr ammingand 2 Vehicle Programming...................................................................................16 Manual TransmissionMode....................................................................................................................17 System Wiring Diagram..........................................................................................................................18 Data Port............................................................................................................................................19 Remote Start Diagnostics.......................................................................................................................20 PRE-INSTALLATION CONSIDERATIONS BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS BRAKES, ENGINE / BODY COMPUTER AND BATTERY). PLAN OUT YOUR INSTALLATIONand determine most suitable locations for all components to be placed. These components include: the module itself, valet/program button, possible relays, and antenna/receiver (DS-1, DS-3, DS-4 and DS-7 only, theDS-00model does not include antenna or remotes.) Allow enough wire to create a service loop with strain relief, should servicing be required. This will also allow easier access and mounting. DAMAGE to the Data Start unitresulting from incorrect installation or failure to follow guidelines stated in this book will not be covered under warranty and will be subject to repair or replacement charges. USE A VOLT OHM METER to test and locate all connections. Test Lights can damage a vehicle’s computer systems. ADDITIONAL PARTS, which are not inc luded with this unit, may be needed for your particular vehicle. These itemsmay include extra relays or Anti-Theft System Bypass modules. 3 INSTALLATION CAUTIONS & WARNINGS This System is a Low Current Remote Start that only works in Data Mode with a Bypass Module. DO NOT route any wiring that may become entangled with brake, gas pedals, steering column or any other moving parts in the vehicle. DO NOT exceed the rated output current of any circuit on the Remote start module. Failure to observe this warning will result in damage to the unit not covered under warranty. DO NOT remote start the vehicle in a closed garage! Make sure that the garage door is open…

Text truncated - open the document above for the full version.

Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 18 of 30 8 Photographs - EUT Constructional Details TX &RX Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 19 of 30 Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 20 of 30 TX: Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 21 of 30 Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 22 of 30 RX: Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 23 of 30 Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 24 of 30 Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 25 of 30

Label and Location The text will be silk-screen on the product FCC ID: Q6WBT039001 Label Location

Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 26 of 30 TX: Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 27 of 30 Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 28 of 30 Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 29 of 30 RX: Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 30 of 30 ------End of report------

China Certification & Inspection Services Co., Ltd. Report No: CCIS12110026201 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT Applicant: GUANGDONG STEELMATE SECURITY CO., LTD Address of Applicant: Renan Street, Dong fu Road, Dongfeng Town,Zhongshan, 528425 China. Equipment Under Test (EUT) Product Name: Antenna Model No.: BTR039A Trade mark: Steelmate FCC ID: Q6WBT039001 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.231:2011 Date of sample receipt: 20 Nov., 2012 Date of Test: 22 Nov., to 05 Dec., 2012 Date of report issue: 05 Dec., 2012 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 30 2 Version Version No. Date Description 00 05 Dec., 2012 Original Prepared By: Date: 05 Dec., 2012 Report Clerk Check By: Date: 05 Dec., 2012 Project Engineer Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 30 3 Contents Page 1 COVER PAGE ......................................................................................................................................................... 1 2 VERSION .................................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................................. 3 4 TEST SUMMARY .................................................................................................................................................... 4 5 GENERAL INFORMATION ................................................................................................................................... 5 5.1 CLIENT INFORMATION ....................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................. 5 5.3 TEST MODE ....................................................................................................................................................... 5 5.4 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 6 5.5 TEST FACILITY ................................................................................................................................................... 6 5.6 TEST LOCATION ................................................................................................................................................ 6 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .................................................................................. 6 5.8 TEST INSTRUMENTS LIST .................................................................................................................................. 7 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 6.1 ANTENNA REQUIREMENT: ................................................................................................................................. 8 6.2 RADIATED EMISSION ......................................................................................................................................... 9 6.2.1 Field Strength Of The Fundamental Signal ......................................................................................... 11 6.2.2 Spurious Emissions ................................................................................................................................. 11 6.3 20DB BANDWIDTH........................................................................................................................................... 13 6.4 DWELL TIME: ................................................................................................................................................... 15 7 PHOTOGRAPHS-TEST SETUP PHOTO .......................................................................................................... 17 8 PHOTOGRAPHS - EUT CONSTRUCTIONAL DETAILS ............................................................................... 18 Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 30 4 Test Summary Test Item Section in CFR 47 Result Antenn…

Text truncated - open the document above for the full version.

Report No: CCIS12110026201 China Certification & Inspection Services Co., Ltd. Project No.:CCIS121100262RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 17 of 30 7 Photographs-test setup photo Radiated Emission(below 1G) Radiated Emission(above 1G)