Q78-AC2787CDMA 2000 Wireless Data Terminal

CDMA2000 1X EV-DO Wireless Data Terminal User Guide ZTE Corporation http://www.zte.com.cn CDMA2000 1X EV-DO Wireless Data Terminal User Guide This User Guide is used for Wireless Data Terminal of AC2787. CDMA2000 1X EV-DO Wireless Data Terminal User Guide ZTE Corporation http://www.zte.com.cn Copyright Statement Copyright © 2009 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. CDMA2000 1X EV-DO Wireless Data Terminal User Guide ZTE Corporation 1 http://www.zte.com.cn 1. Introduction Thank you for choosing ZTE Corporation‟s CDMA2000 Wireless Data Terminal (hereinafter referred to as Data Terminal). Data Terminal supports both CDMA2000 1X EV-DO and CDMA2000 1X network. In the area where there is signal, it allows you to go surfing on the Internet, send & receive short messages, and make & receive phone calls. The pictures in this help are only used to demonstrate your Data Terminal‟s functions, so they are maybe different from what you see on your Data Terminal. Please refer to your Data Terminal if they are differences. 2. Precautions  Use the original accessories or those authenticated by the manufacturer. Using any unauthenticated accessories may affect the data terminal‟s performance, violate the warranty provisions or relevant national regulations about telecom terminals, or even cause body injury.  Do not disassemble, modify, frequently pull/plug the antenna, stretch, rotate or bend the antenna with great force.  Before pulling out the data terminal, please use Windows safely removing the hardware and make sure to exit the application. Do not directly pull out the terminal to avoid the damage of data terminal or the influence on the normal operation of operating system.  Do not forcefully plug/pull the data terminal to avoid the damage of connector.  Do not use your data terminal near weak signal or high-precision electronic devices. Radio wave interference may cause misoperation of electronic devices or other problems.  Turn off your data terminal on airplane where it‟s forbidden to use it. The data terminal may affect the normal operation of electronic devices, therefore please follow the relevant regulations when using your mobile phone on airplane.  Turn off your data terminal in hospital where it‟s forbidden to use it. The data terminal may affect the normal operation of medical apparatus, therefore please follow the relevant regulations when using your mobile phone in hospital.  Please do not use the data terminal near flammable or explosive materials; otherwise it might cause failure or fire.  Keep your data terminal away from water. This may cause overheating or failure if water or any other kind of liquid enters your mobile phone. Please do not use your data terminal near high temperature, damp or dusty place.  Keep your data terminal away from children to avoid shock, plunge or impact. It may cause body injury when the data terminal is used as a toy. CDMA2000 1X EV-DO Wireless Data Terminal User Guide ZTE Corporation 2 http://www.zte.com.cn 3. Appearance 3.1 Introduction 3.2 Insert R-UIM Card Note: If your data terminal doesn‟t need R-UIM card, please skip this section. 1. Pull out the tap； 2. Take out the R-UIM card cover in the direction indicated by the arrow； 3. Insert R-UIM card as below figure； Side View Rear View CDMA2000 1X EV-DO Wireless Data Terminal User Guide ZTE Corporation 3 http://www.zte.com.cn 4. Push back R-UIM card cover. 3.3 Operation Guide of Data Cable Generally, the Data Terminal could be directly connected with USB port. You could also connect the Data Terminal with PC by using the accompanying data cable, as shown in the following figure. Connect Interface ① with Data Terminal, and interface ② with PC's USB port. If the power supply from USB port is insufficient, connect both interface ② and ③ with USB port together. 4. Install and Uninstall 4.1 System Requirements The Data Terminal supports the following operating system:  Windows 2000  Windows XP  Windows Vista PC minimum configurations: CPU Pentium-II/233MHz USB interface 2.0 (USB1.0 and 1.1 compatible) Optical Drive CD-ROM (for installation only) Memory 64 MB Disk Space 50 MB (used for installation of application) 4.2 Installation Guide Take Windows XP for example. Under other operating systems, please refer to the installation CDMA2000 1X EV-DO Wireless Data Terminal User Guide ZTE Corporation 4 http://www.zte.com.cn under Windows XP. Do not insert the Data Terminal before installation. 4.2.1 Install 1. Please connect Data Terminal to PC through USB interface. You could use the data cable to connect. 2. The installation driver will automatically run. Please install according to the installation wizard. 3. The system will automatically find new hardware and install the driver. Wait for a while. Click "Finish" after the installation is completed. Note: Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the optimal performance. If necessary, adjust the Data Terminal's position. 4.2.2 Uninstall 1. Select StartAll ProgramsZTEMTUninstall ZTEMT UI, and you will be asked if you want to remove the program. Click “Yes”. 2. Please wait and then click “OK” when un-installation is completed. 5. Run the Application After the application is installed successfully, the application icon will appear on your desktop. Double-click this icon or select from Start Programs ZTEMT ZTEMT. UI Run the application to display the user interface. The icons on the interface are used to access the function, which indicate as below: Connect Value Add Voice Call Voice Log Short Message Net Connect Net Log Phone book Setting …

Text truncated - open the document above for the full version.

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China Date: May 23, 2011 Power of Attorney To whom it may concern, Please be notified that I, Royce Wang have designated Jones Tsai in Sporton International Inc. and David Gong in ZTE CORPORATION as the persons responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jones Tsai in Sporton International Inc., and David Gong in ZTE CORPORATION on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. This authorization is limited to the product of as following: FCC ID: Q78-AC2787 Any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Royce Wang ZTE CORPORATION Tel: +86-755-26770345 Fax: +86-755-26770347 E-Mail: [email protected]

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China Tel: +86-755-86360379 ; Fax: +86-755-86360298 Date: May 23, 2011 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: Q78-AC2787 To Whom It May Concern: We, ZTE CORPORATION, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Sincerely yours, David Gong

Rev. 1/1/03 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China Tel: +86-755-86360379 ; Fax: +86-755-86360298 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: Q78-AC2787. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics (file: AC2787_Schem.pdf) Block Diagram (file: AC2787_BlkDia.pdf) Parts List (file: AC2787_PartsLst.pdf) Operation Description (file: AC2787_OpDes.doc) Tune Up Procedure (file: AC2787_TunPro.doc) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________________ David Gong Attached: Copy of FCC Confidentiality Policy

1/1 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District, Shenzhen, Guangdong, P.R.China Tel: +86-755-86360379 ; Fax: +86-755-86360298 Date: May 23, 2011 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : Q78-AC2787 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos (file: AC2787_ExtPho.pdf)  Internal Photos (file: AC2787_IntPho.pdf)  Test Setup Photos (file: AC2787_Tsup.pdf)  User Manual (file: AC2787_UserMan.pdf) The application contains technical information, which ZTE CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, David Gong

Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 1 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 1. External Photograph of EUT Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 2 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 3 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 4 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 5 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 6 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787

Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 7 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 2. Internal Photograph of EUT Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 8 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 9 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 10 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 11 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 12 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 13 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Main Antenna Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 14 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 15 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 AUX. Antenna Photographs of EUT Report No.: EP150615 Brand Name: ZTE / Model Name: AC2787 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 16 of 16 TEL : 86-0512-5790-0158 Report Issued Date : May 24, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787

SPORTON INT TEL : 86-0512- FAX : 86-0512 FCC ID : Q78- APPL EQU BRA MO D FCC STA N The p SPOR evalu appli c The t writte be rep Revi e TERNATIONAL -5790-0158 -5790-0958 -AC2787 FCC SA F LICANT IPMENT AND NAME DEL NAME ID NDARD product was RTON INTER ated in ac cable techn test results en approval produced ex ewed by: Jones T s SP No. 3- L (KUNSHAN) I AR Test Re FCC : : E : E : : : s received o RNATIONAL ccordance w ical standar in this rep of SPORTO xcept in full sai / Manage PORTON -2, PingXia NC. eport SAR ZTE COR cdma 200 ZTE AC2787 Q78-AC2 FCC 47 C IEEE C95 IEEE 152 FCC OET on May 05, L INC., woul with the p rds. port apply e ON INTERNA . er N INTERN ang Road, R Tes RPORATIO 00 Wireles 787 CFR Part 2 5.1-1991 8-2003 T Bulletin 6 2011 and c ld like to de rocedures exclusively ATIONAL (K NATIONA , Kunshan st Re ON ss data ter 2 (2.1093) 65 Supple completely t eclare that and show n to the test KUNSHAN) I AL (KUNS n, Jiangsu Page Numb Report Issu Report Vers epor rminal ement C (E tested on M the tested s n the com ed model / NC., the te s SHAN) IN u Province ber : 1 o ued Date : Ma sion : Re Report No. rt Edition 01 May 12, 201 sample ha s pliance wit / sample. W st report sh NC. e, P.R.C. of 29 ay 25, 2011 ev. 01 : FA150615 -01) 1. We, s been th the Without all not 5 SPORTON INT TEL : 86-0512- FAX : 86-0512 FCC ID : Q78- Revision His 1. Stateme 2. Adminis 2.1 T 2.2 A 2.3 M 2.4 A 3. General 3.1 D 3.2 P 3.3 A 3.4 D 3.5 T 3 3 4. Specific 4.1 In 4.2 S 5. SAR Me 5.1 E 5 5 5.2 D 5.3 R 5.4 M 5.5 P 5.6 D 5.7 D 5 5 5.8 T 6. Tissue S 7. Uncerta 8. SAR Me 8.1 P 8.2 S 8.3 V 9. DUT Tes 10. Measure 10.1 S 10.2 A 10.3 V 10.4 S 10.5 P 11. SAR Tes 11.1 C 11.2 T 12. Referen Appendix A . Appendix B. Appendix C. Appendix D. Appendix E. Appendix F. TERNATIONAL -5790-0158 -5790-0958 -AC2787 FCC SA story ............. ent of Compli stration Data Testing Labora Applicant ........ Manufacturer . Application De Information Description of Product Photos Applied Standa Device Catego Test Conditions 3.5.1 Ambient 3.5.2 Te s t C on c Absorption ntroduction .... SAR Definition easurement S E-Field Probe. 5.1.1 E-Field P 5.1.2 E-Field P Data Acquisitio Robot ............. Measurement Phantom ........ Device Holder Data Storage a 5.7.1 Data Sto 5.7.2 Data Eva Test Equipmen Simulating Li ainty Assessm easurement E Purpose of Sys System Setup Validation Res sting Position ement Proced Spatial Peak S Area & Zoom S Volume Scan P SAR Averaged Power Drift Mo st Results .... Conducted Pow Test Records f ces ............... . Plots of Sys . Plots of SAR . DASY Calib . Product Pho . Test Setup P . FCC 3G SAR L (KUNSHAN) I AR Test Re ...................... iance ............. ...................... atory .............. ..................... ..................... etails .............. ..................... . Device Under s ................... ards .............. ory and SAR L s ................... t Condition .... nfiguration ..... Rate (SAR) .. . ..................... n .................... System ........... ..................... Probe Specific Probe Calibrat on Electronics ..................... Server .......... ..................... ..................... and Evaluation orage ............ aluation ........ nt List ............ iquids ............ ment .............. Evaluation ..... stem Performa ..................... ults ............... n .................... dures ............ SAR Evaluatio Scan Procedu Procedures ... d Methods ..... onitoring ........ ..................... . wer (Unit: dBm for Body SAR ...................... stem Perform R Measureme ration Certifi otos Photos R Measureme NC. eport Table ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... r Test (DUT) ... ...................... ...................... Limits ............. ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... cation ............ tion ................ (DAE) ........... ...................... ...................... ...................... ...................... n .................... ...................... ...................... ...................... ...................... ...................... ...................... ance check ... ...................... ...................... ...................... ...................... n ................... res ................ ...................... ...................... ...................... ...................... m) .................. Test .............. ...................... mance Check ent cate ent Procedure e of Con ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... ...................... es ntents ...................... ...................... ...................... ..................... ..................... ....................…

Text truncated - open the document above for the full version.

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011-5-12 System Check_Body_835MHz_110512 DUT: Dipole 835 MHz Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: MSL_835_110512 Medium parameters used: f = 835 MHz; σ = 0.977 mho/m; ε r = 54.4; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：21.4 °C DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(5.99, 5.99, 5.99); Calibrated: 2010-9-21 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1210; Calibrated: 2010-11-18 - Phantom: SAM1; Type: SAM; Serial: TP-1479 - Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Pin=250mW/Area Scan (61x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 2.73 mW/g Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 54.8 V/m; Power Drift = -0.00559 dB Peak SAR (extrapolated) = 3.52 W/kg SAR(1 g) = 2.49 mW/g; SAR(10 g) = 1.65 mW/g Maximum value of SAR (measured) = 2.69 mW/g

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011-5-12 #01 CDMA2000 BC0_RTAP 153.6_Horizontal Up_0.5cm_Ch1013 DUT: 150501 Communication System: CDMA2000; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium: MSL_835_110512 Medium parameters used: f = 825 MHz; σ = 0.967 mho/m; ε r = 54.4; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：21.4 °C DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(5.99, 5.99, 5.99); Calibrated: 2010-9-21 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1210; Calibrated: 2010-11-18 - Phantom: SAM1; Type: SAM; Serial: TP-1479 - Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Ch1013/Area Scan (31x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.01 mW/g Ch1013/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.3 V/m; Power Drift = 0.101 dB Peak SAR (extrapolated) = 2.51 W/kg SAR(1 g) = 0.905 mW/g; SAR(10 g) = 0.570 mW/g Maximum value of SAR (measured) = 1 mW/g Ch1013/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.3 V/m; Power Drift = 0.101 dB Peak SAR (extrapolated) = 1.3 W/kg SAR(1 g) = 0.875 mW/g; SAR(10 g) = 0.558 mW/g Maximum value of SAR (measured) = 0.934 mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011-5-12 #02 CDMA2000 BC0_RTAP 153.6_Horizontal Down_0.5cm_Ch1013 DUT: 150501 Communication System: CDMA2000; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium: MSL_835_110512 Medium parameters used: f = 825 MHz; σ = 0.967 mho/m; ε r = 54.4; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：21.4 °C DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(5.99, 5.99, 5.99); Calibrated: 2010-9-21 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1210; Calibrated: 2010-11-18 - Phantom: SAM1; Type: SAM; Serial: TP-1479 - Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Ch1013/Area Scan (31x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.948 mW/g Ch1013/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18 V/m; Power Drift = -0.070 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 0.831 mW/g; SAR(10 g) = 0.510 mW/g Maximum value of SAR (measured) = 0.913 mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011-5-12 #03 CDMA2000 BC0_RTAP 153.6_Vertical Front_0.5cm_Ch1013 DUT: 150501 Communication System: CDMA2000; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium: MSL_835_110512 Medium parameters used: f = 825 MHz; σ = 0.967 mho/m; ε r = 54.4; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：21.4 °C DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(5.99, 5.99, 5.99); Calibrated: 2010-9-21 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1210; Calibrated: 2010-11-18 - Phantom: SAM1; Type: SAM; Serial: TP-1479 - Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Ch1013/Area Scan (31x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.467 mW/g Ch1013/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.6 V/m; Power Drift = -0.00198 dB Peak SAR (extrapolated) = 0.629 W/kg SAR(1 g) = 0.429 mW/g; SAR(10 g) = 0.283 mW/g Maximum value of SAR (measured) = 0.454 mW/g Ch1013/Zoom Scan (5x5x7)/Cube 1: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.6 V/m; Power Drift = -0.00198 dB Peak SAR (extrapolated) = 0.631 W/kg SAR(1 g) = 0.403 mW/g; SAR(10 g) = 0.252 mW/g Maximum value of SAR (measured) = 0.440 mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011-5-12 #04 CDMA2000 BC0_RTAP 153.6_Vertical Back_0.5cm_Ch1013 DUT: 150501 Communication System: CDMA2000; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium: MSL_835_110512 Medium parameters used: f = 825 MHz; σ = 0.967 mho/m; ε r = 54.4; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：21.4 °C DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(5.99, 5.99, 5.99); Calibrated: 2010-9-21 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1210; Calibrated: 2010-11-18 - Phantom: SAM1; Type: SAM; Serial: TP-1479 - Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Ch1013/Area Scan (31x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.654 mW/g Ch1013/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.74 V/m; Power Drift = -0.036 dB Peak SAR (extrapolated) = 0.786 W/kg SAR(1 g) = 0.556 mW/g; SAR(10 g) = 0.352 mW/g Maximum value of SAR (measured) = 0.617 mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011-5-12 #05 CDMA2000 BC0_RTAP 153.6_Tip Mode_0.5cm_Ch1013 DUT: 150501 Communication System: CDMA2000; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium: MSL_835_110512 Medium parameters used: f = 825 MHz; σ = 0.967 mho/m; ε r = 54.4; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：21.4 °C DASY5 Configuration: - Probe: ET3DV6 - SN1788; ConvF(5.99, 5.99, 5.99); Calibrated: 2010-9-21 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1210; Calibrated: 2010-11-18 - Phantom: SAM1; Type: SAM; Serial: TP-1479 - Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Ch1013/Area Scan (41x41x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.162 mW/g Ch1013/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.4 V/m; Power Drift = -0.042 dB Peak SAR (extrapolated) = 0.457 W/kg SAR(1 g) = 0.150 mW/g; SAR(10 g) = 0.066 mW/g Maximum value of SAR (measured) = 0.170 mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2011-5-12 #06 CDMA2000 BC0_RTAP 153.6_Horizontal Up_0.5cm_Ch384 DUT: 150501 Communication System: CDMA2000; Frequency: 836.52 MHz;Duty Cycle: 1:1 Me…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY

SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : F1 of F6 TEL : 86-0512-5790-0158 Report Issued Date : May 25, 2011 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-AC2787 FCC SAR Test Report Report No. : FA150615 Appendix F. FCC CDMA2000 SAR Measurement Procedures Conducted Output Power: The EUT was tested according to the requirements of the FCC 3G procedures and the 3.1.2.3.4. A detailed analysis of the output power verification is provided as the table below: Function Type Reverse Traffic Channel Test Mode Radio Configuration Service Option Data Rates (kbps) Power Control Low Ch Mid. Ch High Ch Forward Traffic Channel (Fwd) Reverse Traffic Channel (Rvs) 1013 384 777 CDMA2000 Cellular FCH 1 1 1 55 Full All Up 24.31 23.87 24.11 3 3 3 55 Full All Up 24.34 23.76 24.00 F-SCH 3 3 3 32 FCH:Full,SCH 9.6 All Up 24.30 23.75 24.00 SCH 3 3 3 32 FCH:Full,SCH 9.6 All Up 24.35 23.77 24.02 EVDO Rev.0* Subtype:0 RTAP 153.6 All Up 24.36 23.95 24.12 EVDO Rev.A* Subtype:0 RETAP 4096 All Up 24.33 23.92 …

Text truncated - open the document above for the full version.