Q78-ALARMBOXALARM BOX

Alarm Box User Manual Version V5.0 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R . C h i n a 518057 Tel: (86) 755 26771900 Fax: (86) 755 26770801 URL: http://ensupport.zte.com.cn E-mail: [email protected] LEGAL INFORMATION Copyright © 2006 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein. ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice. Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information. The ultimate right to interpret this product resides in ZTE CORPORATION. Revision History Revision No. Revision Date Revision Reason R1.0 20091030-R1.0 First Edition Serial Number: Preface About This Manual This manual introduces the components of an alarm system and guides the readers in installing, configuring, operating, and upgrading the alarm box. Moreover, it provides several networking scenarios of the alarm box. What Is in This Manual This manual contains the following chapters: Chapter Summary Chapter 1 Overview Introduces the components of an alarm system and the functions of the alarm box. Chapter 2 Alarm Box Installation Introduces how to install the alarm box and how to connect the power cable and network cable. Chapter 3 Typographical Conversions Introduces how to perform initial configurations on the alarm box. Chapter 4 Common Operations Introduces the alarm box menu and some common operations. Chapter 5 Telnet Commands Introduces how to telnet the alarm box from a PC to configure the alarm box. Chapter 6 Alarm Box Networking Scenarios Introduces the typical networking scenarios of the alarm box, including the remote deployment, multi-office-in-one, and cross-VLAN networking. Appendix A Alarm Box Upgrade Introduces how to upgrade the alarm box by using the HyperTerminal through FTP. Appendix B Acronyms and Abbreviations Lists the acronyms and abbreviations. Conventions 1. Typographical Conversions 2. Mouse Operation Conversions Action Meaning Click Refers to clicking the primary mouse button (usually the left mouse button) once. Double-click Refers to quickly clicking the primary mouse button (usually the left mouse button) twice. Right-click Refers to clicking the secondary mouse button (usually the right mouse button) once. Drag Refers to pressing and holding a mouse button and moving the mouse. Click Refers to clicking the primary mouse button (usually the left mouse button) once. Typeface Meaning Bold Menus, menu options, function names, input parameters, option button names, check boxes, drop-down lists, dialog box names, window names. Italic Variables for you supply values  Note: Provides additional information about a certain topic. Caution: Provides alerts about a certain topic. In this situation, improper operations may result in equipment damage or loss of data. -i- Contents Chapter 1 Overview .................................................................................................................... 1-1 1.1 Introduction ...................................................................................................................... 1-1 1.2 Alarm System Components ............................................................................................. 1-1 1.3 Alarm Box Functions ........................................................................................................ 1-2 1.4 Technical Specifications ................................................................................................... 1-4 Chapter 2 Alarm Box Installation ................................................................................................. 2-1 2.1 Introduction ...................................................................................................................... 2-1 2.2 Installing the Alarm Box ................................................................................................... 2-1 2.3 Connecting Cables (AC Power Cable and Network Cable) ............................................. 2-4 2.4 Connecting Cables (DC Power Cable and Network Cable) ............................................. 2-6 Chapter 3 Initial Configuration .................................................................................................... 3-1 3.1 Introduction ...................................................................................................................... 3-1 3.2 Keys, Alarm Indicators, and Alarm Server Indicators ....................................................... 3-1 3.3 Icons on the LCD Screen ................................................................................................. 3-3 3.4 Configuring the Alarm Box .....................…

Text truncated - open the document above for the full version.

Date: 08 th January, 2010 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The ZTE Corporation , the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the ZTE Corporation solely in matters relating to the application for an FCC equipment authorization for FCC ID: Q78-ALARMBOX including the signing of documents in connection with this Application. Necessary acts carried out by ZTE Corporation on our behalf of the ZTE Corporation in connection with the Application shall have the same effect as acts of the ZTE Corporation. The ZTE Corporation also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely, ____________ Royce Wang ZTE product approval manager

Date: 08 th January, 2010 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: ZTE Corporation FCC ID: Q78-ALARMBOX FCC Part 22&24 Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. ZTE Corporation requests that the following documents regarding this submission for FCC ID: Q78-ALARMBOX be kept confidential: Exhibit Type File Name Block Diagram CONF APPENDIX Q78-ALARMBOX_Block Diagram.pdf Schematics CONF APPENDIX Q78-ALARMBOX_Schematics.pdf Operational Description CONF APPENDIX Q78-ALARMBOX_Operational Description.pdf Part list CONF APPENDIX Q78-ALARMBOX_BOM.pdf Tune-Up-Procedure CONF APPENDIX Q78-ALARMBOX_Tune up procedure.pdf Those documents contain detailed system and equipment description and related information about the product which ZTE Corporation considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, ZTE Corporation considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Royce Wang ZTE product approval manager

External Photos 1. Front View of EUT 2. Back View of EUT 3. All Side View of EUT

Label Label Location

Internal Photos

FCC ID: Q78-ALARMBOX Page 1 of 2 Prediction of MPE limit at given distance Product Descritpion: Alarm Box Type: Alarm Box 1. Introduction Equation from page 18 of OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 2. Limits for Maximum Permissible Exposure According to FCC Part 1.1307, systems operating under the provisions of this section shall be operated in a manner the ensures that the public is not exposed to radio frequency energy level in excess of the commission’s guidelines. According to FCC Part 1.1310 RF exposure is calculated. Limits for General Population/ Uncontrolled Exposure Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength(E)(V/m) Magnetic Field Strength (H)(A/m) Power Density (S)(mW/cm 2 ) 0.3-1.34 614 1.63 (100)* 1.34-30 824/f 2.19/f (180/f2)* 30-300 27.5 0.073 0.2 300-1500 f/1500 1500-100,000 1.0 FCC ID: Q78-ALARMBOX Page 2 of 2 3. Test result GSM 850MHz Maximum peak output power at antenna input terminal(dBm): 30.64 Maximum peak output power at antenna input terminal(mW): 1158 Prediction distance(cm): 20 Predication frequency(MHz): 836.5 Antenna Gain (typical) (dBi): 2 Power density at predication frequency at 20 cm(mW/cm 2 ): 0.460 MPE limit for RF exposure at prediction frequency(mW/cm 2 ): 0.558 GSM 1900MHz Maximum peak output power at antenna input terminal(dBm): 30.25 Maximum peak output power at antenna input terminal(mW): 1059 Prediction distance(cm): 20 Predication frequency(MHz): 1880 Antenna Gain (typical) (dBi): 2 Power density at predication frequency at 20 cm(mW/cm 2 ): 0.42 MPE limit for RF exposure at prediction frequency(mW/cm 2 ): 1.0 4. Conclusion Test result is passed.

Report No.: SZ09120099E01 Page 2 of 39 TABLE OF CONTENTS 1. TEST CERTIFICATION ........................................................................................................... 3 2. GENERAL INFORMATION .................................................................................................... 4 2.1 EUT Description ......................................................................................................................... 4 2.2 Test Standards and Results........................................................................................................ 5 2.3 Facilities and Accreditations ..................................................................................................... 6 3. 47 CFR PART 2, PART 22H REQUIREMENTS .................................................................... 7 3.1 Frequencies ................................................................................................................................. 7 3.2 Conducted RF Output Power .................................................................................................. 11 3.3 99% Occupied Bandwidth ....................................................................................................... 15 3.4 Frequency Stability .................................................................................................................. 19 3.5 Conducted Out of Band Emissions ......................................................................................... 21 3.6 Band Edge ................................................................................................................................. 25 3.7 Transmitter Radiated Power (EIRP/ERP) ............................................................................. 28 3.8 Radiated Out of Band Emissions ............................................................................................ 33 Change History Issue Date Reason for change 1.0 January 11, 2010 First edition Report No.: SZ09120099E01 Page 4 of 39 2. GENERAL INFORMATION 2.1 EUT Description EUT Type ............................. : Alarm Box Model Name ......................... : Alarm Box Serial No. .............................. : (n.a, marked #1 by test site) Hardware Version ................. : V5.0 Software Version .................. : V5.0 Frequency Range .................. : GSM 850MHz: Tx: 824.20 - 848.80MHz (at intervals of 200kHz); Rx: 869.20 - 893.80MHz (at intervals of 200kHz) GSM 1900MHz: Tx: 1850.20 - 1909.80MHz (at intervals of 200kHz); Rx: 1930.20 - 1989.80MHz (at intervals of 200kHz) Modulation Type................... : GMSK Emission Designators ........... : 300KGXW Power Supply ....................... : Input: DC ±48V, 40W Note 1: The transmitter (Tx) frequency arrangement of the Cellular 850MHz band used by the EUT can be represented with the formula F(n)=824.2+0.2*(n-128), 128<=n<=251; the lowest, middle, highest channel numbers (ARFCHs) used and tested in this report are separately 128 (824.2MHz), 190 (836.6MHz) and 251 (848.8MHz). Note 2: The transmitter (Tx) frequency arrangement of the PCS 1900MHz band used by the EUT can be represented with the formula F(n)=1850.2+0.2*(n-512), 512<=n<=810; the lowest, middle and highest channel numbers (ARFCHs) used and tested in this report are separately 512 (1850.2MHz), 661 (1880.0MHz) and 810 (1909.8MHz). Note 3: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. Report No.: SZ09120099E01 Page 5 of 39 2.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 2, Part 22 and Part 24 for the EUT FCC ID Certification: No. Identity Document Title 1 47 CFR Part 2 (10-1-05 Edition) Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 2 47 CFR Part 22 (10-1-05 Edition) Public Mobile Services 3 47 CFR Part 24 (10-1-05 Edition) Personal Communications Services Test detailed items/section required by FCC rules and results are as below: No. Section Description Result 1 2.106 22.905 24.229 Frequencies PASS 2 2.1046 Conducted RF Output Power PASS 3 2.1049 20dB Occupied Bandwidth PASS 4 2.1055 22.355 24.235 Frequency Stability PASS 5 2.1051 2.1057 22.917 24.238 Conducted Out of Band Emissions PASS 6 2.1051 2.1057 22.917 24.238 Band Edge PASS 7 22.913 24.232 Transmitter Radiated Power (EIPR/ERP) PASS 8 2.1053 2.1057 22.917 24.238 Radiated Out of Band Emissions PASS Report No.: SZ09120099E01 Page 6 of 39 2.3 Facilities and Accreditations 2.3.1 Facilities Shenzhen Electronic Product Quality Testing Center Morlab Laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L1659. All measurement facilities used to collect the measurement data are located at Electronic Testing Building, Shahe Road, Xili, Nanshan District, Shenzhen 518055 CHINA. The test site is constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22; the FCC registration number is 741109. 2.3.2 Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 20 - 25 Relative Humidity (%): 40 - 60 Atmospheric Pressure (kPa): 96 Report No.: SZ09120099E01 Page 7 of 39 3. 47 CFR PART 2, PART 22H REQUIREMENTS 3.1 Frequencies 3.1.1 Requirement According to FCC section 22.905, the frequency blocks assignment for the cellular radiotelephone service is listed as below: (a) Channel Block A: Mobile 824 - 835MHz, Base 869 - 880MHz; Mobile 845 - 846.5MHz, Base 890 - 891.5MHz (b) Channel Block B: Mobile 835 - 845 MHz, Base 880 - 890MHz; Mobile 846.5 - 849 MHz, Base 891.5 - 894MHz According to FCC section 24.229, the frequencies available in the Broadband PCS services are listed as below, in accordance with the frequency allocations table of FCC sect…

Text truncated - open the document above for the full version.

Test Setup Photos 1. CSE 2. RSE