Q78-R212Vodafone Mobile Wi-Fi

Confidential and Proprietary Information of ZTE CORPORATION 1 Vodafone Mobile Wi-Fi R212 Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 2 LEGAL INFORMATION Copyright © 2013 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0 Edition Time : 2012.12 NOTE: Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use. 3 Getting to Know Your Device Appearance The following figure is only for your reference. The actual product may be different.  External Antenna Connector  Micro USB Port  OLED Screen  Power Switch  (U)SIM Card Slot  RESET Button / microSD Card Slot  WPS Button NOTES:  microSD logo is a trademark of SD Card Association.  Please use the original external antenna if necessary. Indicators When the device is powered on, the following icons will appear on the OLED screen, with the corresponding indicates listed in the table below: Icon Indication Network signal strength. 2G/3G/4G Network type. 2G, 3G, 4G icon will appear on the OLED screen according to the network being connected. Connect to the Internet automatically. Connect to the Internet manually. Roaming network indication. New message received. Wi-Fi Status and number of the connected users. Battery power indication. 4 Connection Scenario Your device supports two methods to go to Internet and supports multi-clients for surfing on the Internet at the same time. The following figure is only for your reference.  4G Mode: Use your (U)SIM card to access the Internet.  AP Station Mode: Your device will connect to other WLAN device (hotspot device, wireless router, etc.) via Wi-Fi to access the Internet. The WLAN device has already connected to the Internet. NOTE: The subnet must be deferent between your device and other WLAN device. 5 Installing Your Device 1. Insert the SIM card. 2. Insert the microSD card. 1) Open the microSD card cover. NOTE: Do not pull the cover rudely, as it is connected with the device. 2) Insert the microSD card into the microSD slot. The following picture shows the correct inserting direction. You will hear a click when the microSD card locks in place. 3) Close the microSD card cover. 6 Connecting to Your Device Via Wi-Fi 1. Power on your device directly. It will take 1~2 minutes to initialize. 2. Use your normal Wi-Fi application on the client to search for the available wireless networks. NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Configuring Your PC”, and then the client will get an IP address like “192.168.0.100”. 3. Select the SSID of your device, and then click Connect. The following picture is only for your reference. 4. Input the password, and then click Connect. NOTE:  There may require the password for Wi-Fi connection, please check the label on your device to get the default.  Double press the W PS button, and then the SSID and Wi-Fi key will display on the OLED screen. 7 5. Wait a moment, and then the client will connect to your device successfully. 8 Via USB Cable 1. Connect to the device. 2. Power on your device. 3. The OS detects and recognizes new hardware and finishes the installation automatically. NOTE: If the Windows operating system does not launch installation automatically, you can run the installation program in path of My Computer > ZTEMODEM. 4. Wait a moment, and then the client will connect to your device successfully. 9 Accessing the Internet 4G Mode After the client connected to your device successfully, you can access the Internet in the Automatic or Manual mode. The default mode is Automatic. Mode Operations Automatic Your device will connect to the Internet automatically, and your clients can surf on the Internet directly. Manual Login the webGUI configuration page, and select Settings > Network Settings > Dial-up Settings > Manual, and then click Home > Connect / Disconnect. NOTE: If you want to modify the detailed parameters of your device, please login the webGUI configuration page by visiting http://192.168.0.1 or http://m.home. The default password is admin. AP Station Mode 1. Login the webGUI configuration page. 2. Select Settings > AP Station. 3. Set the AP Station Switch and Preferred Network, and then click Apply. NOTE: You need to Enable the AP Station Switch and select Wi-Fi. 4. Connect to the WLAN device. There are two methods for your reference.  Select the listed SSID, and then click Connect.  Click Add, input the WLAN device information in the Add Wi-Fi Hotspot area, and then click Apply. 10 5. After your device connected to the WLAN device successfully, you can access the Internet. 11 Configuring Your PC Follow the following steps and figures for Windows XP to configure the Internet Protocol for your Wi-Fi connection. . 1. Right-click My Network Places, and then select Properties. 2. Right-click Wireless Network Connection, and then select Properties. 3. Select Internet Protocol(TCP/IP), and then click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK to finish the configuration. 12 13 Warning and Notice To the Owner  Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manu…

Text truncated - open the document above for the full version.

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Tel: +86-755-26770345 ; Fax: +86-755-26770347 Date: April 26, 2013 Power of Attorney To whom it may concern, Please be notified that I, Royce Wang, have designated Michael Lin in Sporton International Inc. and Yanli Chen in ZTE CORPORATION as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Michael Lin in Sporton International Inc. and Yanli Chen in ZTE CORPORATION on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: Q78-R212 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Contact Person: Royce Wang Company: ZTE CORPORATION TEL: +86-755-26770345 FAX: +86-755-26770347 E-mail: [email protected]

Rev. 1/1/03 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Shenzhen, Guangdong, 518057, P.R.China Tel: 029-88458594 ; Fax: 029-88458594 Date: April 26, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: Q78-R212 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics (file: R212_Schem.pdf) Block Diagram (file: R212_BlkDia.pdf) Parts List (file: R212_PartsLst.pdf) Operation Description (file: R212_OpDes.pdf) Tune up Procedure (file: R212_TunPro.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ________________________ Yanli Chen

1/1 ZTE CORPORATION Date: April 26, 2013 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : Q78-R212 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  Test set-up photos  External photos  Internal photos  Users Manual The application contains technical information, which ZTE CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Contact Person: Yanli Chen Company: ZTE CORPORATION TEL: 029-88458594 FAX: 029-88458594 E-mail: [email protected]

ZTE CORPORATION Date: April 26, 2013 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: Q78-R212 To Whom It May Concern: We, ZTE CORPORATION, declare that R212 I/O connect can only support charging. It can’t support USB with PC for data transfer. Sincerely yours, Contact Person: Yanli Chen Company: ZTE CORPORATION TEL: 029-88458594 FAX: 029-88458594 E-mail: [email protected]

Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 1 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 1. External Photograph of EUT Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 2 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 3 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 4 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 5 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 6 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 7 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 List of Accessory: Specification of Accessory AC Adapter Brand Name ZTE Model Name STC-A22O50I1500M5 Battery Brand Name ZTE中兴 Model Name Li3728T42P3h774771 USB Cable Signal Line Type 1.2m, shielded cable, without core Remark: For accessories equipped with this EUT, please refer to the following photos. 2. Photograph of Accessory Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 8 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 9 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 AC Adapter Photographs of EUT Report No.: EP312313 Brand Name: ZTE; Model Name: R212 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 10 of 33 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 Battery

MF93D电池盖透明膜 V1.0 Getting Connected... The Wi-Fi network key and SSID (Wi-Fi network identifier) is located below. Double tapping the power button will reveal your SSID and Wi-Fi Key. Managing your device... The Mobile Wi-Fi settings and status can be accessed when connected to the device via typing http://vodafonemobile.wifi into your web browser, with the default password found on your Wi-Fi reminder card.

SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 1 of 61 TEL : 86-755-8637-9589 Report Issued Date : Apr. 26, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : Q78-R212 FCC SAR Test Report Report No. : FA312313 FCC SAR Test Report APPLICANT : ZTE CORPORATION EQUIPMENT : Vodafone Mobile Wi-Fi BRAND NAME : ZTE MODEL NAME : R212 FCC ID : Q78-R212 STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was completely tested on Apr. 25, 2013. We, SPORTON INTERNATIONAL (SHENZHEN) INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL (SHENZHEN) INC., the test report shall not be reproduced except in full. SPORTON INTERNATIONAL (SHENZHEN) INC. No. 101, Complex Building C, Guanlong Village, Xili Town, Nanshan District, Shenzhen, Guangdong, P.R.C. Approved by: Jones Tsai / Manager Reviewed by: Eric Huang / Deputy Manager SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 2 of 61 TEL : 86-755-8637-9589 Report Issued Date : Apr. 26, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : Q78-R212 FCC SAR Test Report Report No. : FA312313 Table of Contents 1. Statement of Compliance ..............................................................................................................................................4 2. Administration Data .......................................................................................................................................................5 2.1 Testing Laboratory ...................................................................................................................................................5 2.2 Applicant .................................................................................................................................................................5 2.3 Manufacturer ...........................................................................................................................................................5 2.4 Application Details ...................................................................................................................................................5 3. General Information .......................................................................................................................................................6 3.1 Description of Equipment Under Test (EUT) ...........................................................................................................6 3.2 Maximum RF output power among production units ...............................................................................................7 3.3 Product Photos .....................................................................................................................................................10 3.4 Applied Standard ...................................................................................................................................................10 3.5 Device Category and SAR Limits ..........................................................................................................................10 3.6 Test Conditions ......................................................................................................................................................10 4. Specific Absorption Rate (SAR) ..................................................................................................................................11 4.1 Introduction ........................................................................................................................................................... 11 4.2 SAR Definition ....................................................................................................................................................... 11 5. SAR Measurement System ..........................................................................................................................................12 5.1 E-Field Probe ........................................................................................................................................................13 5.2 Data Acquisition Electronics (DAE) .......................................................................................................................14 5.3 Robot ....................................................................................................................................................................14 5.4 Measurement Server .............................................................................................................................................14 5.5 Phantom ................................................................................................................................................................15 5.6 Device Holder .......................................................................................................................................................16 5.7 Data Storage and Evaluation ................................................................................................................................17 5.8 Test Equipment List ...............................................................................................................................................19 6. Tissue Simulating Liquids ...........................................................................................................................................20 7. SAR System Verification .............................................................................................................................................22 7.1 Purpose …

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : C1 of C1 TEL : 86-755-8637-9589 Report Issued Date : Apr. 26, 2013 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : Q78-R212 FCC SAR Test Report Report No. : FA312313 Appendix C. DASY Calibration Certificate The DASY calibration certificates are shown as follows. SPORTON INTERNATIONAL (SHENZHEN) INC. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC Test Report D835V2, serial No. 4d091 Extended Dipole Calibrations Referring to KDB 450824, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D835V2 – serial no. 4d091 ʳ 835 Head 835 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 11.18.2011 -25.734 ʳ 50.867 ʳ -5.1504ʳ -22.318 ʳ47.082 ʳ -6.8594ʳ 11.17.2012 -25.917 0.7149.7731.09-5.13290.02 -22.4660.6648.683 1.60 -6.35980.50 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL (SHENZHEN) INC. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC Test Report <Dipole Verification Data> - D835V2, serial no. 4d091 835MHz - Head 835MHz – Body SPORTON INTERNATIONAL (SHENZHEN) INC. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC Test Report D1900V2, serial no. 5d118 Extended Dipole Calibrations Referring to KDB 450824, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D1900V2 – serial no. 5d118 1900 Head 1900 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Los s (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 11.21.2011 -22.535 53.449 6.9277 -22.401 47.82 7.1133 11.17.2012 -22.603 0.3053.491 -0.047.10090.17-22.45 0.2246.14 -1.68 6.7234-0.39 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL (SHENZHEN) INC. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC Test Report <Dipole Verification Data>- D1900V2, serial no. 5d118 1900MHz – Head 1900MHz - Body SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 FCC Test Report D2450V2, serial no. 736 Extended Dipole Calibrationsġ Referring to KDB 450824, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification of the extended calibration> D2450V2 – serial no. 736 ġ 2450 Head 2450 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 7.25.2011 -27.042 54.398 1.4805 -30.696 50.812 2.8262 7.25.2012 -27.950 -3.365 52.541 1.857 0.77343 0.707 -31.781 -3.535 50.572 0.24 1.5953 1.2309 The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 FCC Test Report <Dipole Verification Data> - D2450 V2, serial no. 736 (Date of Measurement : 7.25.2012) 2450 MHz - Head SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 FCC Test Report 2450 MHz – Body SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 FAX : 886-3-328-4978 D2600V2, serial no. 1008 Extended Dipole Calibrations Referring to KDB 450824, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Justification Procedure of Extended Dipole Calibration> 1. Setup a Network Analyzer (Agilent N5230A) and set the start frequency and stop frequency to Network Analyzer according to the dipole frequency, at least +/- 200MHz around the calibration point. 2. Using calibration kit to perform Network Analyzer Open, Short and Load calibration. 3. Connect the dipole with the calibrated Network Analyzer. 4. Place the dipole underneath the phantom which is filled with head-simulating or body-simulating liquid. 5. Set the Network Analyzer frequency by the dipole calibration frequency. Monitor the return-loss and impedance results with Log Magnitude format and Smith Chart, respectively. 6. Record the result and compare with the prior calibration. Please check the Appendix C for detail records. <Justification of the extended calibration> D2600V2 – serial no. 1008 2600 Head 2600 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (o…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 1 of 83 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 FCC RF Test Report Report No. : FR312313B FCC RF Test Report APPLICANT : ZTE CORPORATION EQUIPMENT : Vodafone Mobile Wi-Fi BRAND NAME : ZTE MODEL NAME : R212 FCC ID : Q78-R212 STANDARD : FCC Part 15 Subpart E §15.407 CLASSIFICATION : (NII) Unlicensed National Information Infrastructure The product was received on Jan. 23, 2013 and completely tested on Apr. 16, 2013. We, SPORTON INTERNATIONAL (KUNSHAN) INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL (KUNSHAN) INC., the test report shall not be reproduced except in full. Jones Tsai / Manager SPORTON INTERNATIONAL (KUNSHAN) INC. No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P.R.C. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 2 of 83 TEL : 86-0512-5790-0158 Report Issued Date : Apr. 26, 2013 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : Q78-R212 FCC RF Test Report Report No. : FR312313B TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Feature of Equipment Under Test ..................................................................................................... 5 1.4 Product Specification of Equipment Under Test ................................................................................ 6 1.5 Testing Site ........................................................................................................................................ 7 1.6 Applied Standards ............................................................................................................................. 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Carrier Frequency and Channel ........................................................................................................ 9 2.2 Pre-Scanned RF Power ................................................................................................................... 10 2.3 Test Mode ........................................................................................................................................ 12 2.4 Connection Diagram of Test System ............................................................................................... 13 2.5 Support Unit used in test configuration and system ........................................................................ 14 2.6 Description of RF Function Operation Test Setup ........................................................................... 14 2.7 Measurement Results Explanation Example ................................................................................... 15 3 TEST RESULT ........................................................................................................................................... 16 3.1 26dB Bandwidth Measurement ....................................................................................................... 16 3.2 Maximum Conducted Output Power Measurement ........................................................................ 26 3.3 Power Spectral Density Measurement ............................................................................................ 29 3.4 Peak Excursion Ratio Measurement ..…

Text truncated - open the document above for the full version.