Q78-X768MOBILE PHONE

ZTE-C X768 CDMA 2000 1X Digital Mobile Phone User Manual The manual is applicable for X768 mobile phone. 文档信息 版本 修订日修订软件版本 备注 1.0 2010年 4 丁雪 认证测试 版本 Copyright © 2010 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. Version 1.0 in April 2010 Contents BEFORE USE Safety Instructions 2 Precautions for using the mobile phone 3 Precautions for using the battery 7 Precautions for using the charger 8 Keys and parts 11 Inserting and Removing UIM Card 16 Insert and Remove Memory Card 17 Battery 19 Install the battery 19 Remove the battery 20 Charge the battery 20 Power On/Off 22 ENTER MENU COMMUNICATION Dial 27 Make a call 27 Answer calls 28 Call Options 28 Messages 30 Send New 30 My Movilnet space 31 View Message 32 Settings 32 Memory Info 34 Voice Mail 34 Contacts 35 All List 35 Find 36 Add Entry 36 Groups 38 Speed Dials 38 Memory Status 39 Call History 39 APPLICATION Settings 41 Display 41 Call 42 Security 45 Extras 47 Pen Calibration 49 Profiles 50 Organizer 52 Games 52 Alarm 52 Scheduler53 Stopwatch 54 Calculator 54 Unit Conversion 55 World Time 56 Neo Aplic 56 ENTERTAINMENT Media Player 57 Multimedia 58 Camera 58 Camera Recorder 59 Radio 59 Record 60 My Doc 61 Neo Nave 61 DIAL-UP INTERNET ACCESS INPUT METHODS Handwriting Input 64 Virtual Keypad Input 64 APPENDIX Clearance and Maintenance 67 Failure Analysis 69 Health and Safety Information 70 FCC Regulations 73 Declaration of RoHS Compliance 74 Before Use 1 Before Use Thank you for choosing ZTE-C X768 digital mobile phone. (Shortly referred to as “Mobile Phone”) To guarantee your mobile phone is always in its best condition, please read this manual carefully and keep it for future reference. The pictures in this user manual are only used to demonstrate the mobile phone’s functions, so they may be different from what you see on your mobile Before Use 2 phone. Safety Instructions If your mobile phone is lost or stolen, notify your service provider immediately to prevent others from abusing it. To protect your mobile phone against abuse, take the following precautions: l Set a phone lock code and modify it from time to time. l Keep your mobile phone with you at all times. Before Use 3 Precautions for using the mobile phone Road Safety l Pay attention to road safety and follow all local relevant laws and regulations while driving. Interference l Do not use your mobile phone near sensitive electronic equipment. Radio wave interference may cause electronic equipment to malfunction. Pay special attention when you use your mobile phone near audio-phones, pacemakers and/or other medical electronic equipment, fire detectors, automatic-doors and/or other automatic-control equipment. For details on the influence caused by your mobile phone on pacemakers or other medical electronic equipment, please consult the manufacturer or your local distributor. Before Use 4 l Do not use your mobile phone near TV sets, radios or office automated equipment to avoid interference. On an Aeroplane l Turn off your mobile phone on an aeroplane when use is forbidden. The mobile phone may affect the normal operation of electronic devices, therefore please follow the relevant regulations when using your mobile phone on an aeroplane. In Hospital l Turn off your mobile phone in hospital where it’s forbidden to use it. The mobile phone may affect the normal operation of medical apparatus, therefore please follow the relevant regulations when using your mobile phone in hospital. At the Petrol Station l Do not use your mobile phone in petrol station. Turn off your mobile Before Use 5 phone near fuels or chemicals. Waterproof l Keep your mobile phone away from water. This may cause overheating, electrical leakage or failure if water or any other kind of liquid enters your mobile phone. Disassemble l Do not disassemble or reassemble your mobile phone as this may cause damage, electrical leakage or circuit failure. Antenna l Do not use your mobile phone if your antenna is damaged as this may cause bodily harm. Away from Children l Keep your mobile phone from children. Do not allow children to use the mobile phone as a toy as this may be harmful to their health. Before Use 6 Original Accessories l Use the original accessories or those authenticated by the manufacturer. Using non-original accessories may affect the mobile phone’s performance, violate the warranty provisions or relevant national regulations on mobile phones, or even cause bodily harm. Areas where industrial explosives are used l Please strictly adhere to relevant laws and regulations to turn off your mobile phone in or near areas where explosive materials are used. Emergency Calls l Make sure your mobile phone is turned on and in the service area. Input the national emergency number and press the Send key to dial. Let others know where you are and do not hang up help has reached you. l Do not take your phone as the only tool to seek help. Before Use 7 Precautions for using the battery l Put the battery in a cool and ventilated place where there is no direct sunshine. l The battery life is usually limited, and it becomes shorter and shorter after the battery is charged over and over again. If the charging fails several times, this indicates that the battery is worn out and the replacement is advised. l Dispose the worn-out batteries in designated places according to specified regulations rather than throw them into residential garbage. l Do not throw the worn-out batteries into fire because this might cause fire or explosion. l Do not press with great force when installing the battery because this may result in leakage, overheating, explosion or fire. l Do not disassemb…

Text truncated - open the document above for the full version.

Date: 04 th May, 2010 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The ZTE Corporation, the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the ZTE Corporation solely in matters relating to the application for an FCC equipment authorization for FCC ID: Q78-X768 including the signing of documents in connection with this Application. Necessary acts carried out by ZTE Corporation on our behalf of the ZTE Corporation in connection with the Application shall have the same effect as acts of the ZTE Corporation. The ZTE Corporation also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely, Royce Wang ZTE product approval manager

Date: 04 th May, 2010 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: ZTE Corporation FCC ID: Q78-X768 FCC Part 22 Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. ZTE Corporation requests that the following documents regarding this submission for FCC ID: Q78-X768 be kept confidential: Exhibit Type File Name Block Diagram CONF APPENDIX Q78-X768_Block Diagram.pdf Schematics CONF APPENDIX Q78-X768_Schematics.pdf Operational Description CONF APPENDIX Q78-X768_Operational Description.pdf Part list CONF APPENDIX Q78-X768_BOM.pdf Tune-Up-Procedure CONF APPENDIX Q78-X768_Tune up procedure.pdf Those documents contain detailed system and equipment description and related information about the product which ZTE Corporation considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, ZTE Corporation considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Royce Wang ZTE product approval manager

External Photos 1. Front View of EUT 2. Back View of EUT 3. All Side View of EUT

Label Label Location

04 th May, 2010 Equipment Authorization Division Office of Engineering and Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Ref: FCC ID: Q78-X768 Dear Sirs: ZTE Corporation requests acceptance of the labeling proposal described below for cell phone bearing FCC identifier Q78-X768. The subject cell phone are compact handheld models as shown in figure 1, authorized under 47CFR Part 22 for GSM mobile services. Figure 1. Because the majority of the cell phone housing is composed of display, speaker, operating controls, camera and a removable battery pack, there is extremely limited space available to attach the required label carrying the FCC identifier. Attaching the label to the battery pack is not acceptable because the battery pack is a removable item. For this reason, ZTE Corporation proposes placing the label carrying the FCC identifier inside the battery compartment as shown in figure 2. Figure 2. The consumer packaging for these models includes the battery pack as a separate item, NOT installed on the radio. As such, the FCC identifier will be readily visible to the user before the battery pack is installed and whenever the battery pack is removed or replaced. In this location, the label will also be protected from physical abuse and remain readable for the anticipated life of the device. The consumer packaging for these models is a "gift box" which does not allow the transceiver to be seen at time of purchase. In order to meet the requirements of 47CFR Part 2.925 (d), ZTE Corporation will add the FCC identifier "Q78-X768" to the outside of the consumer "gift box" packaging. Thank you for your attention to this matter. Yours Sincerely, Royce Wang ZTE product approval manager

Internal Photos

Report No.: SZ10040017S01 Page 2 of 81 Contents 1. GENERAL INFORMATION....................................................................................................3 1.1. Notes.........................................................................................................................................3 1.2. Organization item....................................................................................................................3 1.3. Conclusion................................................................................................................................3 2. TESTING LABORATORY.......................................................................................................4 2.1. Identification of the Responsible Testing Laboratory..........................................................4 2.2. Identification of the Responsible Testing Location..............................................................4 2.3. Accreditation Certificate........................................................................................................4 2.4. List of Test Equipments..........................................................................................................4 3. TECHNICAL INFORMATION ...............................................................................................5 3.1. Identification of Applicant......................................................................................................5 3.2. Identification of Manufacturer..............................................................................................5 3.3. Equipment Under Test (EUT)................................................................................................5 3.3.1. Photographs of the EUT..................................................................................................6 3.3.2. Identification of all used EUTs........................................................................................6 4. TEST RESULTS.........................................................................................................................6 4.1. Applied Reference Documents...............................................................................................6 4.2. Test Environment/Conditions................................................................................................7 4.3. Operational Conditions During Test.....................................................................................7 4.3.1. Informations On The Testing..........................................................................................8 4.3.2. The Measurement System.............................................................................................10 4.3.3. Uncertainty Assessment.................................................................................................12 4.4. MEASUREMENT PROCEDURES....................................................................................16 4.4.1. Procedures Used To Establish Test Signal....................................................................16 4.5. Items used in the Test Results List.......................................................................................17 4.6. Test Results List.....................................................................................................................18 ANNEX A ACCREDITATION CERTIFICATE..........................................................................20 ANNEX B PHOTOGRAPHS OF THE EUT ................................................................................21 ANNEX C GRAPH TEST RESULTS ...........................................................................................24 Report No.: SZ10040017S01 Page 4 of 81 2. Testing Laboratory 2.1. Identification of the Responsible Testing Laboratory Company Name: Shenzhen Electronic Product Quality Testing Center Department: Morlab Laboratory Address: 3/F, Electronic Testing Building, Shahe Road, Nanshan District, Shenzhen, 518055 P. R. China Responsible Test Lab Manager: Mr. Shu Luan Telephone: +86 755 86130268 Facsimile: +86 755 86130218 2.2. Identification of the Responsible Testing Location Name: Shenzhen Electronic Product Quality Testing Center Morlab Laboratory Address: 3/F, Electronic Testing Building, Shahe Road, Nanshan District, Shenzhen, 518055 P. R. China 2.3. Accreditation Certificate Accredited Testing Laboratory: No. CNAS L1659 (see Annex A) 2.4. List of Test Equipments No. Instrument Type 1 PC Dell (Pentium IV 2.4GHz, SN:X10-23533) 2 Network Emulator Rohde&Schwarz (CMU200, SN:105894) 3 Voltmeter Keithley (2000, SN:1000572) 4 Synthetizer Rohde&Schwarz (SML_03, SN:101868) 5 Amplifier Nucl udes (ALB216, SN:10800) 6 Power Meter Rohde&Schwarz (NRVD, SN:101066) 7 Probe Antennessa (SN:SN_3708_EP80) 8 Phantom Antennessa (SN:SN_36_08_SAM62) 9 Liquid Antennessa (Last Calibration:21 08 04) Report No.: SZ10040017S01 Page 5 of 81 3. Technical Information Note: the following data is based on the information by the applicant. 3.1. Identification of Applicant Company Name: ZTE Corporation Address: ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,Nanshan District,Shenzhen,Guangdong,P.R.China 3.2. Identification of Manufacturer Company Name: ZTE Corporation Address: ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,Nanshan District,Shenzhen,Guangdong,P.R.China 3.3. Equipment Under Test (EUT) Brand Name: ZTE中兴 Type Name: ZTE中兴 Marking Name: ZTE-C X768 Hardware Version: X768V2MB_A Software Version: X768_S_RH8B3001_0026_Beta Frequency Bands: Tx:825.25 MHz—847.75MHz Rx: 870.25 MHz—892.75MHz Modulation Mode: CDMA Antenna type: Build inside Accessories: Charger; Battery Battery Model: Li3707T42P3h463848 Battery specification: 720mAh 3.7V Report No.: SZ10040017S01 Page 6 of 81 3.3.1. Photographs of the EUT Please see for photographs of the EUT. 3.3.2. Identification of all used EUTs The EUT Identity consists of numerical an…

Text truncated - open the document above for the full version.

Report No.: SZ10040017E02 Page 2 of 35 TABLE OF CONTENTS 2.1 Equipment under Test (EUT) Description ............................................................................... 5 2.2 Test Standards and Results........................................................................................................ 6 2.3 Facilities and Accreditations ..................................................................................................... 7 2.3.1 Facilities ................................................................................................................................... 7 2.3.2 Test Equipments ....................................................................................................................... 7 2.3.3 Test Environment Conditions ................................................................................................... 8 3.1 General Information .................................................................................................................. 9 3.1.1 Conducted Related Tests .......................................................................................................... 9 3.1.2 Radiated Power and Spurious Emission Tests ........................................................................ 10 3.1.3 Frequency Stability Test ......................................................................................................... 11 3.2 Frequencies ............................................................................................................................... 12 3.2.1 Requirement ........................................................................................................................... 12 3.2.2 Test Procedure ........................................................................................................................ 12 3.2.3 Test Result .............................................................................................................................. 12 3.3 Conducted RF Output Power .................................................................................................. 14 3.3.1 Requirement ........................................................................................................................... 14 3.3.2 Test Procedure ........................................................................................................................ 14 3.3.3 Test Result .............................................................................................................................. 14 3.4 Occupied Bandwidth ................................................................................................................ 17 3.4.1 Occupied Bandwidth Definition ............................................................................................. 17 3.4.2 Test Procedure ........................................................................................................................ 17 3.4.3 Test Result .............................................................................................................................. 17 3.5 Conducted Spurious Emission ................................................................................................ 20 3.5.1 Requirement ........................................................................................................................... 20 3.5.2 Test Procedure ........................................................................................................................ 20 3.5.3 Test Result .............................................................................................................................. 21 3.6 Transmitter Radiated Power (EIRP/ERP) ............................................................................. 26 3.6.1 Requirement ........................................................................................................................... 26 3.6.2 Test Procedure ........................................................................................................................ 26 3.6.3 Test Result .............................................................................................................................. 26 3.7 Radiated Spurious Emission ................................................................................................... 29 Report No.: SZ10040017E02 Page 3 of 35 3.7.1 Requirement ........................................................................................................................... 29 3.7.2 Test Procedure ........................................................................................................................ 29 3.7.3 Test Result .............................................................................................................................. 30 3.8 Frequency Stability .................................................................................................................. 34 3.8.1 Frequency Stability Requirement ........................................................................................... 34 3.8.2 Test Procedure ........................................................................................................................ 34 3.8.3 Test Result .............................................................................................................................. 35 Change History Issue Date Reason for change 1.0 April 30, 2010 First edition Report No.: SZ10040017E02 Page 5 of 35 2. General Information 2.1 Equipment under Test (EUT) Description Description ........................... : CDMA 1X digital mobile phone Model Name ......................... : ZTE-C X768 Serial No. .............................. : N/A Hardware Version ................. : X768V2MB_A Software Version................... : X768_S_RH8B3001_0026_Beta Emission Designator ............. : 1M25F9W Modulation ...................…

Text truncated - open the document above for the full version.

Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 1/26 Issue: A Date: 2009/10/05 1 COMOSAR E-FIELD PROBE CALIBRATION REPORT Prepared By: LUC Jérôme, SATIMO Project Description: SAR TEST BENCH Prepared For (End User): Shenzhen Morlab Communication Technology This document is issued by SATIMO, in confidence and is not to be reproduced in whole or in part without the prior written permission. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or in part without the prior written permission of SATIMO. Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 2/26 Issue: A Date: 2009/10/05 2 COMOSAR SEPT ISOTROPIC E-FIELD PROBE CALIBRATION REPORT DATE: 14/11/2008 REFERENCE: SN 37/08 EP80 OBJECT: COMOSAR SEPT ISOTROPIC E-FIELD PROBE MANUFACTURER: SATIMO SERIAL NUMBER: SN 37/08 EP80 CUSTOMER: Shenzhen Morlab Communication Technology CONTRACT: PF2130108b_SAR_Morlab DATE OF CALIBRATION: 2 3/09/2009 WARRANTY: This Calibration certificate may not be reproduced other than in full. Calibration certificates without signature and seal are not valid. This documentation contains property information which is protected by copyright. All right are reserved. No part of this document may be photocopied, reproduced without the prior written agreement of SATIMO. SATIMO shall not be liable for errors contained herein or for incidental or consequential in connection with the furnishing, performance or use of this material. Warranty doesn’t apply to Normal wear, Normal tear, Improper use, Improper maintain, Improper installation. Date SAR TEAM MANAGER Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 3/26 Issue: A Date: 2009/10/05 3 PRODUCT DESCRIPTION Frequency Range 100 MHz - 30 GHz Probe length 330 mm Length of one dipole 4.5 mm Maximum external diameter 8 mm Probe extremity diameter 6.5 mm Distance between dipoles/probe extremity < 2.7 mm Resistance of the three dipole (at the connector) Dipole 1: R1=1.4382 MΩ Dipole 2: R2=1.4894 MΩ Dipole 3: R3=1.4683 MΩ Connector (HIROSE series SR30) 6 wire male (Hirose SR30series) The probe could be checked by measuring the resistance of the three dipoles. CALIBRATION TEST EQUIPMENT TYPE IDENTIFICATION Calibration bench CALISAR Multimeter Keithley 2000 Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 4/26 Issue: A Date: 2009/10/05 4 MEASUREMENT PROCEDURE Probe calibration is realized, in compliance with CENELEC EN 50361 and IEEE 1528 std, with CALISAR, Antennessa proprietary calibration system. The calibration is performed with the EN 50361 annexe technique using reference guide at the five frequencies. Where : P fw = Forward Power P bw = Backward Power a and b = Waveguide dimensions
= Skin depth Keithley configuration: Rate = Medium; Filter =ON; RDGS=10; FILTER TYPE =MOVING AVERAGE; RANGE AUTO After each calibration, a SAR measurement is performed on a validation dipole and compared with a NPL calibrated probe, to verify it. Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 5/26 Issue: A Date: 2009/10/05 5 PROBE UNCERTAINTIES Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 6/26 Issue: A Date: 2009/10/05 6 1. Calibration at 450.00 MHz A. Calibration parameters. Label GSM450 Epsilon 43.33 Sigma 0.84 S/m Temperature 21°C Antenna gain 2.03 dB Antenna S11 -10.50 dB Low limit detection (CW) 0.72 V/m (0.47 mW/kg) Calibration curves ei=f(V) (i=1,2,3) allow to obtain E-field value using the formula: E=(e1*e1+e2*e2+e3*e3)pow(1/2) The following tables represent the calibration curves linearization by curve segment in CW signal. Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 7/26 Issue: A Date: 2009/10/05 7 Calibration coefficients for the three dipoles in CW: v1 e1 v2 e2 v3 e3 0.584004 419.557857 -0.696059 435.622023 0.541191 412.830715 0.467833 339.207465 -0.556278 351.381991 0.469757 336.297240 0.376994 276.348283 -0.452232 288.647980 0.378826 274.224190 0.302778 224.954643 -0.359005 232.397390 0.305842 224.365698 0.241038 182.154071 -0.286978 188.889931 0.246562 183.825274 0.192549 148.484090 -0.230386 154.650994 0.195712 148.993075 0.154033 121.674762 -0.185412 127.378480 0.157543 122.783107 0.123397 100.276479 -0.147311 104.193802 0.125866 100.956090 0.099878 83.770361 -0.118637 86.660489 0.101471 84.063863 0.081165 70.553219 -0.095250 72.263937 0.082289 70.694342 0.065166 59.152028 -0.076788 60.795323 0.066427 59.538957 0.051916 49.592416 -0.061280 51.041514 0.053353 50.232492 0.041968 42.297602 -0.048746 43.022565 0.042906 42.675214 0.033724 36.126757 -0.039149 36.748110 0.034686 36.605243 0.021855 26.962568 -0.024798 27.024723 0.022272 27.149463 0.018405 23.975145 -0.020856 24.085809 0.018755 24.141334 0.015467 21.515985 -0.017534 21.515985 0.015767 21.615299 0.013018 19.309065 -0.014750 19.398191 0.013276 19.487731 0.010938 17.408496 -0.012392 17.529166 0.011157 17.569575 0.009022 15.586953 -0.010228 15.658899 0.009215 15.676938 0.007353 13.956010 -0.008328 13.988181 0.007484 14.020428 0.005989 12.466979 -0.006801 12.495719 0.006111 12.567858 0.004890 11.214019 -0.005573 11.265779 0.005003 11.330818 0.004019 10.133541 -0.004570 10.121882 0.004099 10.168601 0.003279 9.094132 -0.003739 9.157170 0.003352 9.125596 0.002660 8.095827 -0.003041 8.293946 0.002769 8.265350 0.002126 7.324219 -0.002453 7.366500 0.002188 7.358024 0.001685 6.565400 -0.001947 6.580536 0.001724 6.542765 0.001300 5.784440 -0.001511 5.718225 0.001334 5.757862 0.001123 5.245191 -0.001307 5.269400 0.001174 5.275471 0.000891 4.701768 -0.001057 4.723470 0.000924 4.728912 0.000704 4.209798 -0.000850 4.226839 0.000736 4.243862 0.000574 3.790376 -0.000689 3.791428 0.000603 3.830551 0.000457 3.396200 -0.000570 3.434303 0.000483 3.421852 0.000365 3.050686 -0.000463 3.078014 0.000389 3.079630 0.000292 2.745766 -0.000369 2.726866 0.000311 2.759206 0.000236 2.486639 -0.000312 2.489933 0.000246 2.46…

Text truncated - open the document above for the full version.

Ref: CR-280-3-08-SATB-B COMOSAR Dipole 835 MHz Calibration Report Page: 1/6 Issue: B Date: 2009/10/05 1 DIPOLE 835 MHZ CALIBRATION REPORT Prepared By: LUC Jérôme, SATIMO Project Description: SAR TEST BENCH Prepared For (End User): Shenzhen Morlab Communication Technology This document is issued by SATIMO, in confidence and is not to be reproduced in whole or in part without the prior written permission. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or in part without the prior written permission of SATIMO. Ref: CR-280-3-08-SATB-B COMOSAR Dipole 835 MHz Calibration Report Page: 2/6 Issue: B Date: 2009/10/05 2 DIPOLE 835 MHz CALIBRATION REPORT DATE: 19/02/2009 REFERENCE: SN 36/08 DIPC99 OBJECT: COMOSAR IEEE REFERENCE DIPOLE MANUFACTURER: SATIMO SERIAL NUMBER: SN 36/08 DIPC99 CUSTOMER: Shenzhen Morlab Communication Technology CONTRACT: PF2130108b_SAR_Morlab DATE OF CALIBRATION: 2 3/09/2009 WARRANTY: This Calibration certificate may not be reproduced other than in full. Calibration certificates without signature and seal are not valid. This documentation contains property information which is protected by copyright. All right are reserved. No part of this document may be photocopied, reproduced without the prior written agreement of SATIMO. SATIMO shall not be liable for errors contained herein or for incidental or consequential in connection with the furnishing, performance or use of this material. Warranty doesn’t apply to Normal wear, Normal tear, Improper use, Improper maintain, Improper installation. Date SAR TEAM MANAGER Ref: CR-280-3-08-SATB-B COMOSAR Dipole 835 MHz Calibration Report Page: 3/6 Issue: B Date: 2009/10/05 3 PRODUCT DESCRIPTION Dimension: L=161 mm/ h=89.8mm / d=3.6 mm CALIBRATIO…

Text truncated - open the document above for the full version.