Q78-ZTECS185CDMA2000 1X Digital Mobile Phone

ZTE-C S185 cdma 1X Digital Mobile Phone Quick Start Guide ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26779999 URL: http://www.zte.com.cn E-mail: [email protected] LEGAL INFORMATION Copyright © 2011 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: 1.0 Edition Time: 03-31-2011 Manual No.: 07958450XXXX Phone Overview Earpiece LCD Screen Navigation keys (Left/Right/Up/Down) OK key Left soft key Right soft key Call key End key Number keys(0~9) * key # key LED Speaker USB/Charger jack Microphone Confidential and Proprietary Information of ZTE CORPORATION 1 Key Functions Key Function Description Call key • Make or answer a call. • Press the Call key in the standby mode to enter All Calls list. End key • End an active call or reject a call. • Hold to Power on/off the phone. Left soft key • Enter the main menu in the standby mode. • Switch to the options at lower left of the LCD. Right soft key • Enter the list of all the contacts in the standby mode. • Switch to the options at lower right of the LCD. Navigation keys • Move the cursor up, down, left and right. • In the standby mode, Used as hot keys to enter the designated functions. • In the standby mode, hold the Up key to open/close the LED. • In the contacts list, press the Left key or Right key to switch groups. • Press the Left key or Right key to adjust volume in conversation. • Used as direction key in games. OK key • Confirm the commands and options selected. • Confirm the character chosen while character inputting. • In the standby mode, press the OK key to browse the T WORLD website. Number keys • Key in numbers or characters. • Hold the 0 key to input + in the standby mode. • Hold to make a speed dial call (1~9) in the standby mode.(The 1-5 key is preset as the service call.) • Press to enter corresponding submenu. # key • Hold the # key in the standby mode to enable/disable vibration. • Press the # key to change the text mode while editing text. * key • Hold the * key in the standby mode to lock the keypad. • Press the * key to enter symbols in the text input mode. Confidential and Proprietary Information of ZTE CORPORATION 2 Open the Back Cover Remove the back cover as follows. Confidential and Proprietary Information of ZTE CORPORATION 3 Installing the Battery Install the battery as follows. Confidential and Proprietary Information of ZTE CORPORATION 4 Inserting the UIM Card Insert the UIM card as follows. Confidential and Proprietary Information of ZTE CORPORATION 5 Charging Your Phone 1. Insert the lead from the charger to the socket, and connect the charger to a standard wall AC socket. 2. After the completion of charging, disconnect the charger from the phone and AC socket. Confidential and Proprietary Information of ZTE CORPORATION 6 Switching On/Off 1. Hold the End key to switch on/off your phone. 2. The phone will automatically search for available networks. Confidential and Proprietary Information of ZTE CORPORATION 7 Indicators and Icons Icons Description Icons Description CDMA 1X signal strength New SMS Ring + Vibration mode Vibration mode In the call Silence mode Battery indicator Alarm enabled Confidential and Proprietary Information of ZTE CORPORATION 8 Keypad Lock If you activate Auto Keypad Lock, the keypad will be locked automatically according to your settings. Hold the * key to lock the keypad in the standby mode. Press the Right soft key and then press the * key to unlock the keypad. Notes: If the call is coming when the keypad is locked, you can press the Call key to answer. When the keypad is locked, calls may be possible to the official emergency number programmed into your device. Confidential and Proprietary Information of ZTE CORPORATION 9 Phone Code The phone code could protect your phone from illegal use. The default phone code is 0000. Please change it to your own as soon as possible. Notes: Please remember the code, otherwise some service expense may happen. Confidential and Proprietary Information of ZTE CORPORATION 10 PIN and PUK PIN Code PIN code could protect your UIM card from illegal use. When PIN lock is on, you should enter the PIN code when powering on the phone. The network provider offers you PIN code. You should change PIN code as soon as possible for security. PUK Code Consecutive inputting wrong PIN code for three times will cause locking of UIM card. To unlock, you need PUK code. Notes: PIN code and PUK code may be offered together with the UIM card. If not, please contact your network service provider. Please change default PIN code to your own as soon as possible. Confidential and Proprietary Information of ZTE CORPORATION 11 Text Your phone offers text input modes: abc, Abc, ABC, 123, eZi, Indic and Symbols. Operation Method Change input mode Press the # key to select another text mode, press the * key to enter the symbols mode. Input letters In the abc/Abc/ABC mode, press corresponding letter key till the letter appears. Input words In the eZi and Indic mode, you can press the keys to key in word. Predictive text input is based on a built-in dictionary. When you have finished writing the word and it is correct, confirm it by pressing the OK key. If the word is incorrect, press the Up key or Down key to view other matching words found in the dictionary. Input digits In the 123 mode, press digit key once. Input symbol Press the Navigation keys to switch symbols and press corresponding digit key. Or press the 1 key till the symbol (common symbols) appears except the 123 mode. Input space Press the 0 key, except the 123 mode. Erase character Press the Right soft …

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 3/23/2011 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ZTE Corporation _______(client’s company name)_________hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): (Product description, model name) CDMA2000 1X Digital Mobile Phone , FCC ID: Q78-ZTECS185 We affirm that between SIEMIC and __(client’s company name)___, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name / title ChenYanli/ Certificate engineer Contact information / address ZTE Corporation R&D Center(Xi'an), 10# South Tangyan Road, Hi-tech Industries Development Zone, Xi'an 710065, P.R. China

SCS-F19: Confidentiality Request Letter Rev 1.0 Nov 14, 2006 Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (current) 1.0 1.0 Nov-14-2006 SCS-F19: Confidentiality Request Letter Rev 1.0 Nov 14, 2006 ZTE Corporation 3/23/2011 To: Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: Q78-ZTECS185 We hereby request confidential treatment of information accompanying this application as outlined below: - ZTE-C S185 BOM - ZTE-C S185 schematic - ZTE-C S185_Block diagram - ZTE-C S185 USB BLOCK DIAGRAM - ZTE-C S185 Antenna Description - ZTE-C S185 operational description - ZTE-C S185 tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 and 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title ChenYanli/ Certificate engineer Contact information / address ZTE Corporation R&D Center(Xi'an), 10# South Tangyan Road, Hi-tech Industries Development Zone, Xi'an 710065, P.R. China

内部公开Internal Use Only▲ <以上所有信息均为中兴通讯股份有限公司所有，不得外传> All Rights reserved, No Spreading abroad without Permission of ZTE 第1页 Lable Lable Location

Annex B Internal Photos Cover off photo Main board (face) Main board (back) Adaptor (face) Adaptor (back) Main board (back) with antenna Antenna

China Telecommunication Technology Labs. ® TEST REPORT REPORT NUMBER: I11CA0146-FCC-SAR-2 ON Type of Equipment: CDMA 1X Digital Mobile Phone Type of Designation: ZTE-C S185 Manufacturer: ZTE Corporation ACCORDING TO FCC Part 2.1093: Radiofrequency radiation exposure evaluation: portable devices, 2009-10-01 FCC OET Bulletin 65 Supplement C (Edition 01-01): Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions IEEE Std 1528™-2003: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques China Telecommunication Technology Labs. Month date, year April 6, 2011 Signature He Guili Director FCC Part 2.1093 (2009-10-01), FCC OET 65C (01-01), IEEE Std 1528™-2003 Equipment: ZTE-C S185 REPORT NO.: I11CA0146-FCC-SAR-2 Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 2 of 79 China Telecommunication Technology Labs. ® FCC ID: Q78-ZTECS185 Report Date: 2011-04-06 Test Firm Name: China Telecommunication Technology Labs Registration Number: 840587 Statement The measurements shown in this report were made in accordance with the procedures described on test pages. All reported tests were carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47 Part 2.1093. The sample tested was found to comply with the requirements defined in the applied rules. FCC Part 2.1093 (2009-10-01), FCC OET 65C (01-01), IEEE Std 1528™-2003 Equipment: ZTE-C S185 REPORT NO.: I11CA0146-FCC-SAR-2 Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 3 of 79 China Telecommunication Technology Labs. ® Table of Contents 1. General Information ...................................................................... 4 1.1 NOTES ............................................................................................... 4 1.2 TESTERS ............................................................................................. 5 1.3 TESTING LABORATORY INFORMATION ............................................................ 6 1.4 DETAILS OF APPLICANT OR MANUFACTURER ..................................................... 7 2 Test Item ....................................................................................... 8 2.1 GENERAL INFORMATION ........................................................................... 8 2.2 OUTLINE OF EUT ................................................................................... 8 2.3 MODIFICATIONS INCORPORATED IN EUT ........................................................ 8 2.4 EQUIPMENT CONFIGURATION ..................................................................... 8 2.5 OTHER INFORMATION .............................................................................. 9 2.6 EUT PHOTOGRAPHS ................................................................................ 9 3 Measurement Systems .................................................................. 12 3.1 SAR MEASUREMENT SYSTEMS SETUP ......................................................... 12 3.2 E-FIELD PROBE ................................................................................... 13 3.3 PHANTOM .......................................................................................... 15 3.4 DEVICE HOLDER .................................................................................. 15 4 Test Results.................................................................................. 16 4.1 OPERATIONAL CONDITION ....................................................................... 16 4.2 TEST EQUIPMENT USED .......................................................................... 16 4.3 APPLICABLE LIMIT REGULATIONS ............................................................... 16 4.4 TEST RESULTS .................................................................................... 17 4.5 TEST SETUP AND PROCEDURES ................................................................. 17 4.6 TEST ENVIRONMENT AND LIQUID PARAMETERS ............................................... 17 4.7 SYSTEM VALIDATION CHECK .................................................................... 18 4.8 CONDUCTED POWER MEASUREMENT ........................................................... 19 4.9 TEST DATA ........................................................................................ 20 4.10 MEASUREMENT UNCERTAINTY.................................................................. 23 ANNEX A Photographs ..................................................................... 24 ANNEX B Graphical Results .............................................................. 27 Annex C System Performance Check Graphical Results .................... 63 ANNEX D Probes Calibration Certificates .......................................... 67 ANNEX E Deviations from Prescribed Test Methods .......................... 79 FCC Part 2.1093 (2009-10-01), FCC OET 65C (01-01), IEEE Std 1528™-2003 Equipment: ZTE-C S185 REPORT NO.: I11CA0146-FCC-SAR-2 Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 4 of 79 China Telecommunication Technology Labs. ® 1. General Information 1.1 Notes All reported tests were carried out on a sample equipment to demonstrate limited compliance with the requirements of FCC CFR 47 Part 2.1093. The test results of this test report relate exclusively to the item(s) tested as specified in section 2. The following deviations from, additions to, or exclusions from the test specifications have been made. See Annex E. China Telecommunication Technology Labs.(CTTL) authorizes the applicant or manufacturer (see section 1.4) to reproduce this report provided, and the test report may only be reproduced or p…

Text truncated - open the document above for the full version.

China Telecommunication Technology Labs. ® TEST REPORT REPORT NUMBER: I11CA0146-FCC-RF-1 ON Type of Equipment: CDMA 1X Digital Mobile Phone Type of Designation: ZTE-C S185 Manufacturer: ZTE Corporation ACCORDING TO FCC CFR Part 2, FREQUENCY ALLOCATIONS AND RADIO TREATY MATTERS; GENERAL RULES AND REGULATIONS. Oct, 1, 2009 PART 22, PUBLIC MOBILE SERVICES. Oct 1, 2009 China Telecommunication Technology Labs. Month date, year March 31, 2011 Signature He Guili Director FCC Parts 2, 22 Equipment: ZTE-C S185 REPORT NO.: I11CA0146-FCC-RF-1 Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 2 of 45 China Telecommunication Technology Labs. ® FCC ID: Q78-ZTECS185 Report Date: 2011-03-31 Test Firm Name: China Telecommunication Technology Labs Registration Number: 840587 Statement The measurements shown in this report were made in accordance with the procedures described on test pages. All reported tests were carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47 Parts 2, and 22. The sample tested was found to comply with the requirements defined in the applied rules. FCC Parts 2, 22 Equipment: ZTE-C S185 REPORT NO.: I11CA0146-FCC-RF-1 Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 3 of 45 China Telecommunication Technology Labs. ® CONTENTS 1 GENERAL INFORMATION ................................................................ 4 1.1 NOTES ......................................................................................... 4 1.2 TESTERS ....................................................................................... 5 1.3 TESTING LABORATORY INFORMATION ...................................................... 6 1.4 DETAILS OF APPLICANT OR MANUFACTURER ............................................... 7 2 TEST ITEM ...................................................................................... 8 2.1 GENERAL INFORMATION ..................................................................... 8 2.2 OUTLINE OF EUT ............................................................................. 8 2.3 MODIFICATIONS INCORPORATED IN EUT .................................................. 8 2.4 EQUIPMENT CONFIGURATION ............................................................... 8 2.5 OTHER INFORMATION ........................................................................ 8 3 SUMMARY OF TEST RESULTS .......................................................... 9 4 TEST RESULTS .............................................................................. 10 4.1 RADIATED SPURIOUS EMISSION ........................................................... 10 4.2 RADIATED RF POWER OUTPUT AND ERP ................................................. 15 4.3 OCCUPIED BANDWIDTH ..................................................................... 18 4.4 FREQUENCY STABILITY OVER TEMPERATURE VARIATION ................................ 23 4.5 FREQUENCY STABILITY OVER VOLTAGE VARIATION ...................................... 25 4.6 CONDUCTED RF POWER OUTPUT .......................................................... 27 4.7 CONDUCTED SPURIOUS EMISSION ........................................................ 29 4.8 BAND EDGE .................................................................................. 32 ANNEX A EXTERNAL PHOTOS ........................................................... 36 ANNEX B INTERNAL PHOTOS ........................................................... 41 ANNEX C DEVIATIONS FROM PRESCRIBED TEST METHODS .............. 45 FCC Parts 2, 22 Equipment: ZTE-C S185 REPORT NO.: I11CA0146-FCC-RF-1 Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 4 of 45 China Telecommunication Technology Labs. ® 1 General Information 1.1 Notes All reported tests were carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47 Parts 2 and 22. The test results of this test report relate exclusively to the item(s) tested as specified in section 2. The following deviation from, additions to, or exclusions from the test specifications have been made. See Annex C. China Telecommunication Technology Labs.(CTTL) authorizes the applicant or manufacturer (see section 1.4) to reproduce this report provided, and the test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CTTL Mr. He Guili. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. CTTL accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. FCC Parts 2, 22 Equipment: ZTE-C S185 REPORT NO.: I11CA0146-FCC-RF-1 Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 5 of 45 China Telecommunication Technology Labs. ® 1.2 Testers Name: Li Guoqing Position: Engineer Department: Department of EMC test Signature: Name: Pan Yang Position: Engineer Department: Department of EMC test Signature: Editor of this test report: Name: Li Guoqing Position: Engineer Department: Department of EMC test Date: 2011-03-31 Signature: Technical responsibility for area of testing: Name: Zou Dongyi Position: Manager Department: Department of EMC test Date: 2011-03-31 Signature: FCC Parts 2, 22 Equipment: ZTE-C S185 REPORT NO.: I11CA0146-FCC-RF-1 Address：11 YUE TAN NAN JIE, BEIJING, P.R.C,100045 Tel:+86 10 68094053 FAX:+86 10 68011404 Web:http://www.chinattl.com Page 6 of 45 China Telecommunication Technology Labs. ® 1.3 Testing Laboratory information 1.3.1 Location Name: China Telecommunication Technology Labs. Address: No. 11, Yue Tan Nan Jie, Xi Cheng District BEIJING P. R. CHINA, 100083 Tel: +86 10 68…

Text truncated - open the document above for the full version.

Test up for zte‐s815 Test up for zte‐s815