Q78-ZTEV875WCDMA/GSM(GPRS) Dual-Mode Digital Mobile Phone

V875 User Manual LEGAL INFORMATION Copyright © 2011 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. The Bluetooth ® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corporation is under license. Other trademarks and trade names are the property of their respective owners. Version No.: R1.0 Edition Time : 20110815 Manual No. : 07958450XXXX Notice The information contained in this manual is subject to change without notice. This handbook has been designed with the utmost care to ensure the accuracy of its content. However, all statements, information and recommendations contained therein do not constitute a warranty of any kind, either expressed or implied. Please refer to chapter "For Your Safety" to be sure to use your phone properly and safely. Disclaimer All content and services accessible through this device belong to third parties and are protected by copyright, patents, trademarks and/or other intellectual property laws. Such content and services are provided solely for your personal use and not for commercial use. You may not use them without the expressed permission of the content owner or service provider. Although this does not limit the foregoing, unless expressly authorized by the content owner or service provider concerned, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, distribute or exploit in any manner or medium any content or services displayed through this device. THE CONTENT AND SERVICES OF THIRD PARTIES ARE PROVIDED "AS IS". TO THE FULLEST EXTENT PERMITTED BY LOCAL LAW, ZTE CORPORATION DOES NOT WARRANT THE CONTENT OR SERVICES PROVIDED, EITHER EXPRESSED OR IMPLIED, FOR ANY PURPOSE. ZTE CORPORATION EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ZTE CORPORATION DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF THE CONTENT OR SERVICES PROVIDED THROUGH THIS DEIVCE AND UNDER NO CIRCUMSTANCES SHALL ZTE CORPORATION BE LIABLE, INCLUDING NEGLIGENCE, WHETHER UNDER CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING FROM, OR IN CONNECTION WITH, THE INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ZTE CORPORATION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE LIMITATION OF LEGAL RIGHTS OF THE CONSUMER, IT IS POSSIBLE THAT THESE EXCLUSIONS AND LIMITATIONS DO NOT APPLY. The services of third parties may be suspended or discontinued at any time, and ZTE CORPORATION does not guarantee that any content or service will remain available for a certain period. The content and services are provided by others via networks and transmission equipment outside the control of ZTE CORPORATION. Without limiting the generality of this disclaimer, ZTE CORPORATION expressly disclaims liability for any interruption or suspension of any content or service provided through this device. ZTE CORPORATION is not responsible for customer service related to content and services. Any question or request for service on the content or services must be addressed directly to the respective content and services providers. Downloading content without permission may infringe copyright and/or intellectual property right of the artist. ZTE CORPORATION shall not be held liable for offenses committed on copyright and intellectual property right resulting from downloading by the user. 6 Contents For Your Safety .......................................................................... 16 General Safety ..................................................................................... 16 Radio Frequency (RF) Exposure .......................................................... 17 General Statement on RF Energy................................................... 17 Regulatory Information .................................................................... 22 Distraction ............................................................................................ 23 Driving ............................................................................................. 23 Operating Machinery ....................................................................... 23 Product Handling .................................................................................. 23 General Statement on Handling and Use ....................................... 23 Small Children ................................................................................. 25 Demagnetization ............................................................................. 25 Electrostatic Discharge (ESD) ........................................................ 25 Antenna ........................................................................................... 26 Normal Use Position ....................................................................... 26 Air Bags .......................................................................................... 27 Seizures/ Blackouts ........................................................................ 27 Repetitive Motion Injuries ................................................................ 27 Emergency Calls ............................................................................. 28 7 Loud Noise ...................................................................................... 28 Phone Heating …

Text truncated - open the document above for the full version.

ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China. To: Federal Communications Commission Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 And American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: We, ZTE CORPORATION here declare that [V875] FCC ID: Q78-ZTEV875 [ZTE Corporation] Is only aiming at Brazil market. It has no plan to sell in North America. If ZTE sell this product to U.S in future, we will deliver the AC Adaptor STC-A22O50I700USBA-Z (please see pictures below) with V875 together, only the plug types of two AC Adaptors are different: STC-A22O50I700USBA-A STC-A22O50I700USBA-Z Declared BY: Date:2011-11-23 Company: ZTE Corporation Address: B109, #889, Bibo Rd, Zhangjiang Hi-Tech Park, Shanghai,China Tel:+86-21-68896840 Fax: +86-21-68896835

内部公开▲ 本文所有信息为中兴通讯股份有限公司内部信息，未经允许，不得外传 第1页，共1页 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China Date: Oct 8, 2011 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 And American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: TMC(Telecommunication Metrology Center of MII) is authorized to act on our behalf, until otherwise notified, for applications to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Sincerely yours, Royce Wang ZTE CORPORATION Tel: 0755-26770345 Fax: 0755-26770347 E-Mail: [email protected]

内部公开▲ 本文所有信息为中兴通讯股份有限公司内部信息，未经允许，不得外传 第1页，共1页 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China Date: Oct 8, 2011 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: Q78-LIGHTV9C To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely yours, Royce Wang ZTE CORPORATION Tel: 0755-26770345 Fax: 0755-26770347 E-Mail: [email protected] Q78-ZTEV875

! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !

Label Location !"#$%"&'()"' *(!"&$+&,-$+(&).&/01&,23423(5$2+ 6*16&7888888888888888 9,,&6:7&;<=>=7(9 ?@A7888888888888 *2!"'7&B= label

! ! ! ! ! ! !

Report No. 2011SAR120V3.0 Page 1 of 170 SAR TEST REPORT No. 2011SAR120 FCC ID: Q78- ZTE V875 Applicant: Product: Model: Issued Date: ZTE CORPORATION WCDMA/GSM（GPRS） Dual-Mode Digital Mobile Phone ZTE V875 2011-11-25 Test Laboratory: Shanghai Tejet Communications Technology Co., Ltd Testing Center. Room 6205-6208, Building 6, No.399 Cailun Rd. Zhangjiang Hi-Tech Park, Shanghai, China 210203 Tel: +86-21-61650880 Fax: +86-21-61650881 www.tejet.cn Note: The following test results relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of the test laboratory. TESTING CNAS L4963 Report No. 2011SAR120V3.0 Page 3 of 170 CONTENTS: 1. TEST LABORATORY ...................................................................................................... 5 1.1 TESTING LOCATION: ....................................................................................................................... 5 1.2 LABORATORY ENVIRONMENT ......................................................................................................... 5 1.3 TESTING DATE ................................................................................................................................ 5 2. CLIENT INFORMATION .................................................................................................. 6 2.1 APPLICANT INFORMATION .............................................................................................................. 6 2.2 MANUFACTURER INFORMATION ..................................................................................................... 6 3.EQUIPMENT UNDER TEST (EUT) AND ACCESSORY EQUIPMENT (AE) ............... 7 3.1 INFORMATION OF EUT ................................................................................................................... 7 3.2 INFORMATION OF AE ..................................................................................................................... 8 4. REFERENCE DOCUMENTS .......................................................................................... 9 4.1 REFERENCE DOCUMENTS FOR TESTING ....................................................................................... 9 5．OPERATIONAL CONDITIONS DURING TEST .......................................................... 11 5.1 GENERAL DESCRIPTION OF TEST PROCEDURES.......................................................................... 11 5.2 GSM TEST CONFIGURATION ....................................................................................................... 11 5.3 WCDMA TEST CONFIGURATION ................................................................................................. 11 5.3 BLUETOOTH TEST CONFIGURATION ............................................................................................ 13 5.4 WIFI (802.11B/G/N) TEST CONFIGURATION .............................................................................. 13 6. SAR MEASUREMENTS SYSTEM CONFIGURATION ................................................ 15 6.1 SAR MEASUREMENT SET-UP .................................................................................................... 15 6.2. DASY5 E-FIELD PROBE SYSTEM .............................................................................................. 16 6.2.1. Ex3DV3 Probe Specification ........................................................................................... 16 6.2.2. E-field Probe Calibration ................................................................................................. 17 6.3. OTHER TEST EQUIPMENT ........................................................................................................... 18 6.3.1. Device Holder for Transmitters ....................................................................................... 18 6.3.2. Phantom ............................................................................................................................. 18 6.4. SCANNING PROCEDURE .............................................................................................................. 19 6.5. DATA STORAGE AND EVALUATION .............................................................................................. 21 6.5.1. Data Storage ..................................................................................................................... 21 6.5.2. Data Evaluation by SEMCAD ......................................................................................... 21 6.6. SYSTEM CHECK........................................................................................................................... 23 6.7. EQUIVALENT TISSUES ................................................................................................................. 24 7. CHARACTERISTICS OF THE TEST ............................................................................ 26 7.1. APPLICABLE LIMIT REGULATIONS ............................................................................................... 26 7.2. APPLICABLE MEASUREMENT STANDARDS ................................................................................. 26 8. CONDUCTED OUTPUT POWER MEASUREMENT.................................................... 27 Report No. 2011SAR120V3.0 Page 4 of 170 8.1. SUMMARY ................................................................................................................................... 27 8.2. CONDUCTED POWER RESULTS .................................................................................................. 27 9 TEST RESULTS ............................................................................................................. 30 9.1. DIELECTRIC PERFORMANCE....................................................................................................... 30 9.2. SYSTEM CHECK RESULTS ...............................................................................................…

Text truncated - open the document above for the full version.

TEST REPORT No. 2011TAR520 for ZTE CORPORATION WCDMA/GSM（GPRS） Dual-Mode Digital Mobile Phone Model Name: V875 FCC ID: Q78-ZTEV875 with Hardware Version: V2.0 Software Version: GENERIC_P727D40V1.0.0B02 Issued Date: Oct 21, 2011 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. DGA-PL-114/01-02 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629A-1 TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China,100191. Tel:+86(0)10-62304633-2604, Fax:+86(0)10-62304793, Email:[email protected], web: www.emcite.com No.2011TAR520 Page2 of 80 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULTS ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER (§22.913(A)/§24.232(B)) ................................................................................ 11 A.2 EMISSION LIMT (§2.1051/§22.917§24.238) ............................................................................. 18 A.3 CONDUCTED EMISSION (§15.107§15.207) ............................................................................. 23 A.4 FREQUENCY STABILITY (§2.1055/§24.235) ........................................................................... 28 A.5 OCCUPIED BANDWIDTH (§2.1049(H)(I)) ................................................................................. 30 A.6 EMISSION BANDWIDTH (§22.917(B)/§24.238(B)) .................................................................. 42 A.7 BAND EDGE COMPLIANCE (§22.917(B)/§24.238(B)) ............................................................. 54 A.8 CONDUCTED SPURIOUS EMISSION (§2.1057/§22.917/§24.238) ............................................ 60 No.2011TAR520 Page3 of 80 1. Test Laboratory 1.1. Testing Location Company Name: TMC Beijing, Telecommunication Metrology Center of MIIT Address: 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China Postal Code: 100191 Telephone: 00861062304633 Fax: 00861062304793 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: Sep 10, 2011 Testing End Date: Oct 21, 2011 1.4. Signature Zi Xiaogang (Prepared this test report) Sun Xiangqian (Reviewed this test report) Lu Bingsong Deputy Director of the laboratory (Approved this test report) No.2011TAR520 Page4 of 80 2. Client Information 2.1. Applicant Information Company Name: ZTE CORPORATION Address /Post: ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China City: Shenzhen Country: China Telephone: 0086-21-61460890 Fax: 0086-21-61460602 2.2. Manufacturer Information Company Name: ZTE CORPORATION Address /Post: ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China City: Shenzhen Country: China Telephone: 0086-21-61460890 Fax: 0086-21-61460602 No.2011TAR520 Page5 of 80 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description WCDMA/GSM（GPRS） Dual-Mode Digital Mobile Phone Model Name V875 FCC ID Q78-ZTEV875 Frequency GSM 850MHz; PCS 1900MHz; WCDMA BANDV; Antenna Internal Power supply Battery or Charger (AC Adaptor) Output power 31.09 dBm maximum ERP measured for GSM850 Extreme vol. Limits 3.5VDC to 4.2VDC (nominal: 3.7VDC) Extreme temp. Tolerance -30°C to +50°C Note: Components list, …

Text truncated - open the document above for the full version.

No.2011TAR521 Page1 of 40 TEST REPORT No. 2011TAR521 for ZTE CORPORATION WCDMA/GSM（GPRS） Dual-Mode Digital Mobile Phone Model Name: V875 FCC ID: Q78-ZTEV875 with Hardware Version: 2.0 Software Version: GENERIC_P727D40V1.0.0B02 Issued Date: Oct 21, 2011 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of TMC Beijing. Test Laboratory: DAR accreditation (DIN EN ISO/IEC 17025): No. DGA-PL-114/01-02 FCC 2.948 Listed: No.733176 IC O.A.T.S listed: No.6629A-1 TMC Beijing, Telecommunication Metrology Center of Ministry of Industry and Information Technology 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China,100191. Tel:+86(0)10-62304633-2604, Fax:+86(0)10-62304793, Email:[email protected], web: www.emcite.com No.2011TAR521 Page2 of 40 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. GENERAL DESCRIPTION ............................................................................................................ 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 7 5. LABORATORY ENVIRONMENT ..................................................................................................... 8 6. SUMMARY OF TEST RESULTS ....................................................................................................... 9 7. TEST EQUIPMENTS UTILIZED .................................................................................................... 10 ANNEX A: MEASUREMENT RESULTS ................................................................................................. 11 A.1 OUTPUT POWER (§22.50(D)(2)) ................................................................................................ 11 A.2 EMISSION LIMT (§2.1051/§22.53(G)) ..................................................................................... 15 A.3 CONDUCTED EMISSION (§15.107§15.207) ............................................................................. 20 A.4 FREQUENCY STABILITY (§2.1055/§22.54) .......................................................................... 24 A.5 OCCUPIED BANDWIDTH (§2.1049(H)(I)) ............................................................................... 26 A.6 EMISSION BANDWIDTH (§22.917(B)/§24.238(B))................................................................ 28 A.7 BAND EDGE COMPLIANCE (§22.917(B)/§24.238(B)) .......................................................... 30 A.8 CONDUCTED SPURIOUS EMISSION (§2.1057/§22.917/§24.238) ......................................... 31 No.2011TAR521 Page3 of 40 1. Test Laboratory 1.1. Testing Location Company Name: TMC Beijing, Telecommunication Metrology Center of MIIT Address: 3/F Shou Xiang Technology Building, No.51 Xueyuan Road, Hai Dian District, Beijing, P. R. China Postal Code: 100191 Telephone: 00861062304633 Fax: 00861062304793 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: Sep 10, 2011 Testing End Date: Oct 21, 2011 1.4. Signature Zi Xiaogang (Prepared this test report) Sun Xiangqian (Reviewed this test report) Lu Bingsong Deputy Director of the laboratory (Approved this test report) No.2011TAR521 Page4 of 40 2. Client Information 2.1. Applicant Information Company Name: ZTE CORPORATION Address /Post: ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China City: Shenzhen Postal Code: 518057 Country: China Telephone: 0086 21 68895196 Fax: 0086 21 61460600 2.2. Manufacturer Information Company Name: ZTE CORPORATION Address /Post: ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, Guangdong, 518057, P.R.China City: Shenzhen Postal Code: 518057 Country: China Telephone: 0086 21 68895196 Fax: 0086 21 61460600 No.2011TAR521 Page5 of 40 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description WCDMA/GSM（GPRS） Dual-Mode Digital Mobile Phone Model Name V875 FCC ID Q78-ZTEV875 Frequency GSM 850MHz; PCS 1900MHz; WCDMA BAND V; Antenna Internal Power supply Battery or Charger (AC Adaptor) Output power 23.84 maximum EIRP measured for WCDMA BAND V Extreme vol. Limits 3.5VDC to 4.2VDC (nominal: 3.7V…

Text truncated - open the document above for the full version.

!"##$"%&#!'()* * !"##$"%&#!'()!* !"##$"%&#!'+),#-.,/0.* !"##$"%&#!'+),#-.* * !"##$"%&#!'+),#-(* !"##$"%&#!'+)#-('1232* !"##$"%&#!'456* *