Q78-ZXHNF680V9GPON ONT

ZXHNF680 GPONONT UserManual ManualNo:SJ-20190805153024-001 EditionTime:2019-11-06(R1.0) LEGALLEGAL LEGAL INFORMATIONINFORMATION INFORMATION Copyright©2019ZTECORPORATION. Thecontentsofthisdocumentareprotectedbycopyrightlawsandin- ternationaltreaties.Anyreproductionordistributionofthisdocumentor anyportionofthisdocument,inanyformbyanymeans,withouttheprior writtenconsentofZTECORPORATIONisprohibited.Additionally,the contentsofthisdocumentareprotectedbycontractualconfidentialityobli- gations. Allcompany,brandandproductnamesaretradeorservicemarks,or registeredtradeorservicemarks,ofZTECORPORATIONoroftheirre- spectiveowners. Thisdocumentisprovided“asis”,andallexpress,implied,orstatutory warranties,representationsorconditionsaredisclaimed,includingwithout limitationanyimpliedwarrantyofmerchantability,fitnessforaparticular purpose,titleornon-infringement.ZTECORPORATIONanditslicensors shallnotbeliablefordamagesresultingfromtheuseoforrelianceonthe informationcontainedherein. ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintel- lectualpropertyrightsorapplicationscoveringthesubjectmatterofthis document.Exceptasexpresslyprovidedinanywrittenlicensebetween ZTECORPORATIONanditslicensee,theuserofthisdocumentshallnot acquireanylicensetothesubjectmatterherein. ZTECORPORATIONreservestherighttoupgradeormaketechnical changetothisproductwithoutfurthernotice. UsersmayvisitZTEtechnicalsupportwebsitehttp://support.zte.com.cn toinquirerelatedinformation. TheultimaterighttointerpretthisproductresidesinZTECORPORATION. 1SafetyPrecautions Note: Beforeusingthedevice,readthefollowingsafetyprecautions.ZTEbearsno liabilitytotheconsequencesincurredbyviolationofthesafetyinstructions. UsageCautions �Readallthesafetycautionscarefullybeforeusingthedevice. �Onlyusetheaccessoriesincludedinthepackage,suchaspowersupply adapter. �Donotextendthepowercord,otherwisethedevicewillnotwork. �Thepowersupplyvoltagemustmeettherequirementsofthedeviceinput voltage(Thevoltagefluctuationrangeislessthan10%). �Keepthepowerplugcleananddrytopreventanyriskofelectricshockor otherdangers. �Disconnectallthecablesduringalightningstormtopreventthedevicefrom damage. �Poweroffandunplugthepowerplugwhenthedeviceisnotinuseforalong time. �Donotattempttoopenthecoversofthedevice.Itisdangeroustodoso whenthedeviceispoweredON. �Donotdirectlystareattheopticalinterfacetopreventanyeyeinjuries. �Poweroffandstopusingthedeviceundertheconditionssuchas,abnormal sound,smoke,andstrangesmell.Contacttheserviceproviderformainte- nanceifthedeviceisfaulty. EnvironmentRequirements �Ensureproperventilationtothedevice.Placethedeviceawayfromdirect sunlightandneverspillanyliquidonthedevice. �Donotplaceanyobjectonthedevicetopreventanydeformationordamage tothedevice. �Donotplacethedevicenearanysourceofheatorwater. �Keepthedeviceawayfromanyhouseholdapplianceswithstrongmagnetic orelectricfields,suchasmicrowaveovenandrefrigerator. CleaningRequirements �Beforecleaning,poweroffthedevice,andunplugallthecablesconnected tothedevice,suchaspowercable,opticalfiber,andEthernetcable. �Donotuseanyliquidorspraytocleanthedevice.Useasoftdrycloth. EnvironmentProtection �Donotdisposethedeviceorpoweradapterimproperly. �Observethelocalregulationsabouttheequipmentdisposalortreatment. EnvironmentalInformation Theequipmentyoupurchasedhasrequiredtheextractionanduseofnatural resourcesforitsproduction.Itmaycontainsubstancesthatarehazardousto people’shealthandtotheenvironment.Toavoidputtingsuchsubstancesinto ourenvironmentandtoreducepressureonournaturalresources,weaskthat youreuseorrecycleyourend-of-lifeequipmentbyusinganaccreditedelec- tronicstake-backsystem. Thesymbolsbelowindicatethatthisproductshouldbereusedorrecycledand notsimplydiscarded.Pleaselocateanduseanappropriatereuseandrecycling site. Ifyouneedmoreinformationoncollection,reuseandrecyclingsystems,con- tactyourlocalorregionalwasteadministration.Youmayalsocontactyour equipmentproviderformoreinformationontheenvironmentalperformancesof theseproducts. 2PackageContent PleasemakesuretheZXHNF680packagecontainsthefollowingitems. Item Quantity ZXHNF680unit One AC-DCpowersupplyadapter One RJ-45Ethernetcable One Usermanual One Note: Thelistisonlyforreference.Theactualcontentsmayvaryfromthelist. Ifanyoftheitemsincludedinthepackageisincorrect,lostordamaged,please contactyourserviceprovider.Ifyouneedtoreplacetheproduct,pleasekeep thepackageandalltheitemsingoodcondition. 3Indicator Figure3-1showstheindicatorsonthefrontpaneloftheZXHNF680unit. Figure3-1IndicatorsontheFrontPanel Table3-1describestheindicatorsonthefrontpaneloftheZXHNF680unit. Table3-1DescriptionsoftheIndicatorsontheFrontPanel Indicator Status Description Off Thedeviceisnotpoweredon. Power Solidgreen Thedeviceispoweredon. Off Thedevicehasnotstartedtheregistration processorthedeviceisnotpoweredon. SolidgreenThedeviceregistrationissuccessful. Flashing(2Hz) green Thedeviceisbeingregistered. PON Flashing(1Hz) green Thedeviceisbeingupgraded. Off Thedevicereceivedopticalpoweris normal. Solidred TheopticaltransmitterofthePONinterface ispoweredoff. LOS Flashingred Thedevicereceivedopticalpowerislower thantheopticalsensitivityofthereceiver. Indicator Status Description Off Thedeviceisnotpoweredonorthe Ethernetconnectiondoesnotexit. Solidgreen TheEthernetportisconnectedbutnodata istransmittedviatheEthernetport. Internet Flashinggreen Thedataistransmittedviainternet connection. Off thedeviceispoweredofforunableto registeronthesoftswitch/IMS. Solidgreen Thedevicehasregisteredonthe softswitch/IMSbutnotrafficisbeing transmitted. Phone1,Phone2 Flashinggreen Thevoiceservicetrafficisbeing transmittedorreceived. Off Thedeviceisnotpoweredonorthe networklinkisnotestablished. Solidgreen Thenetworklinkhasbeenestablishedbut nodataisbeingtransmittedorreceived. LAN1–LAN4 FlashinggreenDataisbeingtransmittedorreceived. Off Thedeviceisnotpoweredonorthe wirelessinterfaceisdisabled. SolidgreenThewirelessinterfaceisenabled. 2.4G FlashinggreenThedataisbeingtransmittedorreceived. Off Thedeviceisnotpoweredonorthe wirelessinterfaceisdisab…

Text truncated - open the document above for the full version.

The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited according to the ISO/IEC 17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Ryan Wang Authorized Signatory BTL INC. No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 TECHNICAL COMPLIANCE STATEMENT This is to certify that the product listed in follows was (were) tested in the BTL EMC Laboratory to comply with below FCC official limits. Equipment GPON ONT Brand Name ZTE Model Name ZXHN F680, ZXHN F689 Applicant ZTE Corporation Address ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R. China Standard(s) FCC Part 15, Subpart B ANSI C63.4-2014 Report(s) BTL-FCCE-1-2001H021

ZTECorporation AdHocModeDeclaration Date:2020-06-01 We,theundersignedcompany CompanyName:ZTECorporation Address:ZTEPlaza,Hi-TechPark,NanshanDistrict,Shenzhen,Guangdong,P.R.China Declarethat: Productdescription:GPONONT Typedesignation:ZXHNF680,ZXHNF689 Brand:ZTE FCCID:Q78-ZXHNF680V9 1.TheEUTdoesn’thaveAdHocModefunctionon“non-USfrequencies”.802.11a/nAdHoc modeshouldnotbesupportedevenonUSDFSfrequencies(5.25~5.35GHz/5.47~5.725GHz). 2.Inaddition,TheproductmeetsallotherrequirementsspecifiedinPart15ESection15.407andno configurationcontrolsareprovidedtochangethefrequencyofoperationsoutsidethegrantof certificationforUSoperation. 3.Onlychannels1~11willbeusedinUSA.Countrycodeselectionisdisabled. Ifyouhaveanyquestionsregardingtheauthorization,pleasedonothesitatetocontactus, thankyou~ Sincerely, Signature:________________________ Name:YumingXie Tel:+886-755-26777740 Email:[email protected]

ModelDeclarationLetter We,theundersigningcompany CompanyName:ZTECorporation Address:ZTEPlaza,Hi-TechPark,NanshanDistrict,Shenzhen,Guangdong,P.R.China Herebyconfirmthatthefollowingproducts: Productdescription:GPONONT Typedesignation:ZXHNF680,ZXHNF689 Trademark:ZTE That ZXHNF680havetwotypesduetothedifferentoutercoveringcolors: TypeA:ZXHNF680’soutercoveringcoloriswhite TypeB:ZXHNF689’soutercoveringcolorisblack TypeAandtypeBonlyusedifferentoutercoveringcolor. Allofthemodels’circuittheory,electricaldesignandthekeypiecesarethesame. Date:2020-06-01 Name:YumingXie Telephone:+886-755-26777740 E-mail:[email protected] Signature:

RF_160,Issue02 DeclarationofAuthorization We Name:ZTECorporation Address:ZTEPlaza,Hi-TechPark,NanshanDistrict, City:Shenzhen,Guangdong, Country:P.R.China Declarethat: NameRepresentativeofagent:Ms.RileyWei AgentCompanyname:BTLInc. Address:No.29,JintangRoad,TangzhenIndustryParkPudongNewArea City:Shanghai Country:China isauthorizedtoapplyforCertificationandsigningrelateddocumentsofthefollowingproduct(s), including731form(s): Productdescription:GPONONT Typedesignation:ZXHNF680,ZXHNF689 Trademark:ZTE FCCID:Q78-ZXHNF680V9 onourbehalf. Date:2020-06-01 City:Shenzhen Name:YumingXie Function:ProductCertificationManager Signature:. Notes: (1):RequiredforFCCapplication (2):ForFCCitmustbetheGranteeCode“owner”ortheauthorizedagent.

ZTECorporation Date:2020-06-01 FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:Q78-ZXHNF680V9 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: BlockDiagram Schematics OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. Sincerely, ----------------------------------- GranteeContact’sSignature YumingXie

Project No.: 2001H021 Page 1 of 19 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2001H021 Page 2 of 19 Model: ZXHN F680 Project No.: 2001H021 Page 3 of 19 Project No.: 2001H021 Page 4 of 19 Model: ZXHN F689 Project No.: 2001H021 Page 5 of 19 Project No.: 2001H021 Page 6 of 19 Project No.: 2001H021 Page 7 of 19

Label Label location

Project No.: 2001H021 Page 8 of 19 2.4G Ant.4 5G Ant.3 2.4G Ant.3 2.4G Ant.1 5G Ant.1 5G Ant.3 5G Ant.2 2.4G Ant.2 Project No.: 2001H021 Page 9 of 19 Project No.: 2001H021 Page 10 of 19 Project No.: 2001H021 Page 11 of 19 Project No.: 2001H021 Page 12 of 19 Project No.: 2001H021 Page 13 of 19 Project No.: 2001H021 Page 14 of 19 Project No.: 2001H021 Page 15 of 19 Project No.: 2001H021 Page 16 of 19 Project No.: 2001H021 Page 17 of 19 Project No.: 2001H021 Page 18 of 19 Project No.: 2001H021 Page 19 of 19

Report No.: BTL-FCCP-4-2001H021 Page 1 of 6 FCC RF EXPOSURE REPORT FCC ID: Q78-ZXHNF680V9 Project No. : 2001H021 Equipment : GPON ONT Brand Name : ZTE Test Model : ZXHN F680 Series Model : ZXHN F689 Applicant : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Manufacturer : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Date of Receipt : Jan. 17, 2020 Date of Test : Apr. 23, 2020 ~ Apr. 27, 2020 Issued Date : Jun. 11, 2020 Report Version : R01 Test Sample : Engineering Sample No.: SH2020030642, SH2020030642-1 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Krain Wu Approved by : Ryan Wang Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-4-2001H021 Page 2 of 6 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Jun. 05, 2020 R01 Modified the comments of the certification authority. Jun. 11, 2020 Report No.: BTL-FCCP-4-2001H021 Page 3 of 6 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For 2.4GHz: Ant. Brand Model Name Antenna Type Connector Gain(dBi) 1 N/A N/A PCB N/A 3 2 N/A N/A PCB N/A 3 3 N/A N/A PCB N/A 3 4 N/A N/A PCB N/A 3 Note: For Beamforming: (1) Antenna Gain=3 dBi. This EUT supports MIMO 4X4, any transmit signals are correlated with each other, so Directional gain = G ANT +10log(N)dBi, that is Directional gain=3+10log(4)dBi=9.02; So, the output power limit is 30-9.02+6=26.98, the power spectral density limit is 8-9.02+6=4.98. For Non-Beamforming: (2) This EUT supports CDD, and all antennas have the same gain, Directional gain= GANT+Array Gain, where Array Gain is as follows: For power spectral density measurements, NANT = 4, NSS = 1. So Directional gain = GANT+ Array Gain =10log (NANT/ NSS) dB =3+10log(4/1)dBi=9.02. Then, the power density limit is 8-(9.02-6)=4.98. For power measurements, Array Gain = 0 dB (NANT ≤ 4), so the Directional gain=3. Report No.: BTL-FCCP-4-2001H021 Page 4 of 6 For 5GHz: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A PCB N/A 3 2 N/A N/A PCB N/A 3 3 N/A N/A PCB N/A 3 4 N/A N/A PCB N/A 3 Note: For Beamforming: (1) Antenna Gain=3 dBi. This EUT supports MIMO 4X4, any transmit signals are correlated with each other, so Directional gain = G Ant. 10log(N)dBi, that is Directional gain=3+10log(4)dBi =9.02; So,the UNII-2A,UNII-2C output power limit is 24-9.02+6=20.98, the UNII-1,UNII-3 output power limit is 30-9.02+6=26.98. The UNII-1 power spectral density limit is 17-9.02+6=13.98, the UNII-2A,UNII-2C power spectral density limit is 11-9.02+6=7.98, the UNII-3 power spectral density limit is 30-9.02+6=26.98. For Non-Beamforming: (2) This EUT supports CDD, and all antennas have the same gain, Directional gain= G ANT +Array Gain, where Array Gain is as follows: For power spectral density measurements, N ANT = 3, N SS = 1. So Directional gain = G ANT + Array Gain = G ANT +10 log (N ANT / N SS ) dB =3+10log(4/1)dBi=9.02. Then, the UNII-1 power spectral density limit is 17-9.02+6=13.98, the UNII-2A,UNII-2C power spectral density limit is 11-9.02+6=7.98, the UNII-3 power spectral density limit is 30-9.02+6=26.98. For power measurements, Array Gain = 0 dB (NANT ≤ 4), so the Directional gain=3. Report No.: BTL-FCCP-4-2001H021 Page 5 of 6 2. TEST RESULTS For 2.4GHz Non-Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3 1.9953 26.00 398.1072 0.15811 1 Complies For 2.4GHz Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 9.02 7.9799 17.00 50.1187 0.07961 1 Complies For 5GHz UNII-1 Non-Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3 7.9799 27.00 501.1872 0.19904 1 Complies For 5GHz UNII-2A Non-Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3 7.9799 21.00 125.8925 0.05000 1 Complies For 5GHz UNII-2C Non-Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3 7.9799 21.00 125.8925 0.05000 1 Complies For 5GHz UNII-3 Non-Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 3 7.9799 27.00 501.1872 0.19904 1 Complies Report No.: BTL-FCCP-4-2001H021 Page 6 of 6 For 5GHz UNII-1 with Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 9.02 7.9799 27 501.1872 0.79607 1 Complies For 5GHz UNII-2A with Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 9.02 7.9799 21 125.8925 0.19996 1 Complies For 5GHz UNII-2C with Beamforming: Antenna Gain (dBi) Antenna Gain (numeric) Max. Tune up Power (dBm) Max. Tune up Power (mW) Power Density (S) (mW/c…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2001H021 Page 1 of 123 FCC Radio Test Report FCC ID: Q78-ZXHNF680V9 This report concerns: Original Grant Project No. : 2001H021 Equipment : GPON ONT Brand Name : ZTE Test Model : ZXHN F680 Series Model : ZXHN F689 Applicant : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Manufacturer : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Date of Receipt : Jan. 17, 2020 Date of Test : Apr. 23, 2020 ~ Apr. 27, 2020 Issued Date : Jun. 05, 2020 Report Version : R00 Test Sample : Engineering Sample No.: SH2020030642, SH2020030642-1 Standard(s) : FCC Part15, Subpart C (15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Krain Wu Approved by : Ryan Wang Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-1-2001H021 Page 2 of 123 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2001H021 Page 3 of 123 Table of Contents Page REPORT ISSUED HISTORY 6 1 . SUMMARY OF TEST RESULTS 7 1.1 TEST FACILITY 8 1.2 MEASUREMENT UNCERTAINTY 8 1.3 TEST ENVIRONMENT CONDITIONS 8 2 . GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF EUT 9 2.2 DESCRIPTION OF TEST MODES 11 2.3 PARAMETERS OF TEST SOFTWARE 12 2.4 DUTY CYCLE 13 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 2.6 SUPPORT UNITS 14 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 EUT OPERATION CONDITIONS 16 3.6 TEST RESULTS 16 4 . RADIATED EMISSIONS TEST 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 18 4.4 TEST SETUP 19 4.5 EUT OPERATION CONDITIONS 20 4.6 TEST RESULTS - 9 KHZ TO 30 MHZ 20 4.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 20 4.8 TEST RESULTS - ABOVE 1000 MHZ 20 5 . BANDWIDTH TEST 21 5.1 LIMIT 21 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM STANDARD 21 5.4 TEST SETUP 21 Report No.: BTL-FCCP-1-2001H021 Page 4 of 123 Table of Contents Page 5.5 EUT OPERATION CONDITIONS 21 5.6 TEST RESULTS 21 6 . MAXIMUM OUTPUT POWER TEST 22 6.1 LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 . CONDUCTED SPURIOUS EMISSIONS 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATION CONDITIONS 23 7.6 TEST RESULTS 23 8 . POWER SPECTRAL DENSITY TEST 24 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 . MEASUREMENT INSTRUMENTS LIST 25 10 . EUT TEST PHOTO 27 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 30 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 33 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 34 APPENDIX D - RADIATED EMISSION- ABOVE 1000 MHZ 37 APPENDIX E - BANDWIDTH 86 APPENDIX F - MAXIMUM OUTPUT POWER 91 APPENDIX G - CONDUCTED SPURIOUS EMISSIONS 98 Report No.: BTL-FCCP-1-2001H021 Page 5 of 123 Table of Contents Page APPENDIX H - POWER SPECTRAL DENSITY 115 Report No.: BTL-FCCP-1-2001H021 Page 6 of 123 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Jun. 05, 2020 Report No.: BTL-FCCP-1-2001H021 Page 7 of 123 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart C (15.247) Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.247(d) 15.205(a) 15.209(a) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.247(a)(2) Bandwidth APPENDIX E PASS ------ 15.247(b)(3) Maximum Output Power APPENDIX F PASS ------ 15.247(d) Conducted Spurious Emissions APPENDIX G PASS ------ 15.247(e) Power Spectral Density APPENDIX H PASS ------ 15.203 Antenna Requirement ------ PASS Note(2) Note: (1) “N/A” denotes test is not applicable in this test repor…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2001H021 Page 27 of 123 10. EUT TEST PHOTO Conducted Emissions Test Photos Report No.: BTL-FCCP-1-2001H021 Page 28 of 123 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-1-2001H021 Page 29 of 123 Radiated Emissions Test Photos Above 1 GHz