Q78-ZXV10B820CA15Hybrid STB

ZXV10B820C-A15 HybridSTB UserGuide _______________________________ ZTECORPORATION ZTEPlaza,KejiRoadSouth,Hi-TechIndustrialPark, NanshanDistrict,ShenZhen,P.R.China Postcode:518057 Tel:+86-755-26771900 URL:http://support.zte.com.cn E-mail:[email protected] LEGALINFORMATION Copyright©2019ZTECORPORATION. Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternational treaties.Anyreproductionordistributionofthisdocumentoranyportionofthis document,inanyformbyanymeans,withoutthepriorwrittenconsentofZTE CORPORATIONisprohibited.Additionally,thecontentsofthisdocumentare protectedbycontractualconfidentialityobligations. Allcompany,brandandproductnamesaretradeorservicemarks,orregistered tradeorservicemarks,ofZTECORPORATIONoroftheirrespectiveowners. Thisdocumentisprovided“asis”,andallexpress,implied,orstatutory warranties,representationsorconditionsaredisclaimed,includingwithout limitationanyimpliedwarrantyofmerchantability,fitnessforaparticularpurpose, titleornon-infringement.ZTECORPORATIONanditslicensorsshallnotbe liablefordamagesresultingfromtheuseoforrelianceontheinformation containedherein. ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectual propertyrightsorapplicationscoveringthesubjectmatterofthisdocument. ExceptasexpresslyprovidedinanywrittenlicensebetweenZTE CORPORATIONanditslicensee,theuserofthisdocumentshallnotacquireany licensetothesubjectmatterherein. ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangeto thisproductwithoutfurthernotice. UsersmayvisittheZTEtechnicalsupportwebsitehttp://support.zte.com.cnto inquireforrelatedinformation. TheultimaterighttointerpretthisproductresidesinZTECORPORATION. HistoryRevision RevisionNo.RevisionDateRevisionReason R1.02019-08-15Firstedition SerialNo.:SJ-20190813101222-001 Content Chapter1SafetyInstructions....................................................1 Chapter2PackingList................................................................4 Chapter3Panels.........................................................................5 3.1FrontPanel ..................................................................................................... 5 3.2RearPanel ...................................................................................................... 6 Chapter4ConnectingUp...........................................................7 4.1ConnectingNetwork ...................................................................................... 7 4.2VideoandAudioConnections ..................................................................... 7 4.3PowerON ........................................................................................................ 9 4.4Upgrade ........................................................................................................... 9 Chapter5Troubleshooting......................................................10 Chapter6TechnicalSpecification..........................................11 1 Chapter1SafetyInstructions SpecialNote •RemovetheplasticcoveringbeforeusingtheSTBtoprovidenormal ventilation. •UsethepoweradapterprovidedwiththeSTB. ImportantSafetyInstructions •Ensurethattheelectricvoltagemeetsthedevicerequirements.Checkthe cablesperiodically,replaceanydamagedcablesimmediately. •Topreventelectricshock,donotremovecover.Therearenouserserviceable partsinside.Referservicingtoqualifiedservice. •Donotusethisapparatusnearwater. •Cleanwithonlydrycloth. •Placethedeviceonaflatsurface.Donotplaceanyheavyobjectsonthe device. •Donotblockanyventilationopenings.Installaccordingtothemanufacturer’s instructions. •Donotinstallnearanyheatsources,suchasradiators,heatregisters,stoves, orotherapparatus(includingamplifiers)thatproduceheat. •Onlyuseattachments/accessoriesspecifiedbythemanufacturer. •Poweroffandpulloutthepowerplugifthedevicewillnotbeusedforalong timeandduringlightningstorms. •Afterpoweroff,waitatleast15secondsbetweenpoweroffandnextpower-on. •Fortheadapter,thesocket-outletshallbeinstalledneartheadapterandshall beeasilyaccessible. Service Donotdisassemblethedevice.Contacttheserviceproviderifthefollowing problemsoccur: 2 •Thepowercableorpowersocketisdamaged. •Thereisanyliquidleaksintothedevice. •Failstorunnormallyevenafterfollowingtheinstructions. •Thedeviceisphysicallydamaged. FCCStatement ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassB digitaldevice,pursuanttopart15oftheFCCrules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferenceinaresidential installation.Thisequipmentgenerates,usesandcanradiateradiofrequency energyand,ifnotinstalledandusedinaccordancewiththeinstructions,may causeharmfulinterferencetoradiocommunications.However,thereisno guaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthis equipmentdoescauseharmfulinterferencetoradioortelevisionreception, whichcanbedeterminedbyturningtheequipmentoffandon,theuseris encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing measures: •Reorientorrelocatethereceivingantenna. •Increasetheseparationbetweentheequipmentandreceiver. •Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected. •Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Toassurecontinuedcompliance,anychangesormodificationsnotexpressly approvedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthority tooperatethisequipment.(Example-useonlyshieldedinterfacecableswhen connectingtocomputerorperipheraldevices). FCCRadiationExposureStatement ThisequipmentcomplieswithFCCRFradiationexposurelimitssetforthforan uncontrolledenvironment.Thistransmittermustnotbeco-locatedoroperatingin conjunctionwithanyotherantennaortransmitter.Thisequipmentshouldbe installedandoperatedwithaminimumdistanceof20centimetersbetweenthe radiatorandyourbody. ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and (2)thisdevicemustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation. 3 RFExposureIn…

Text truncated - open the document above for the full version.

RF_160,Issue02 DeclarationofAuthorization We Name:ZTECorporation Address:ZTEPlaza,Hi-techPark,NanshanDistrict, City:Shenzhen,Guangdong Country:China Declarethat: NameRepresentativeofagent:Ms.RileyWei AgentCompanyname:BTLInc. Address:No.29,JintangRoad,TangzhenIndustryParkPudongNewArea City:Shanghai Country:China isauthorizedtoapplyforCertificationandsigningrelateddocumentsofthefollowingproduct(s), including731form(s): Productdescription:HybridSTB Typedesignation:ZXV10B820C-A15 Trademark:ZTE FCCID:Q78-ZXV10B820CA15 onourbehalf. Date:2020-02-22 City:Shenzhen,Guangdong Name:YumingXie Function:ProductCertificationManager Signature:. Notes: (1):RequiredforFCCapplication (2):ForFCCitmustbetheGranteeCode“owner”ortheauthorizedagent.

FCC,Requestfornon-disclosureDate:21-Nov-2018 RF_501,Issue8Page1of1 CompanyName:ZTECorporation Address:ZTEPlaza,Hi-techPark,NanshanDistrict, City:Shenzhen,Guangdong Country:China To:TeleficationB.V.,Dept.FCCTCB Edisonstraat12A 6902PKZEVENAAR TheNetherlands Subject:RequestforconfidentialityFCCID:Q78-ZXV10B820CA15 Referencenumber:###### DearFCCTCB, 1.Long-TermConfidentiality Pursuantto47CFRSection0.459(a)&(b),weherebyrequestsnon-disclosureandconfidentialtreatment ofthefollowingmaterialssubmittedinsupportofFCCcertificationapplication: Bill(s)ofMaterialBlockDiagrams OperationalDescriptionSchematicDiagramsTune-upProcedure Abovematerialscontainsecrets,proprietaryandtechnicalinformation,whichwouldcustomarilybe guardedfromcompetitorsunder47CFR,section0.457(d)(2).Disclosureorpublicationoranyportionof thiscompanyconfidentialmaterialtootherpartiescouldcausesubstantialcompetitiveharmandprovide unjustifiedbenefitsforcompetitors. 2.Short-TermConfidentiality(STC) PursuanttoPublicNoticeDA04-1705oftheCommission’spolicy,inordertocomplywiththemarketing regulationsin47CFR§2.803andtheimportationrulesin47CFR§2.1204,applicantherebyrequests Short-TermConfidentialtreatmentofthefollowingmaterials(Seenotesbelow): InternalPhotosUser’sManualTestSet-upPhotosExternalPhotos Justification: . PlannedReleaseDateSTC:(notes2,3,4,5) Date:2020/03/13Nameandsignatureofapplicant:YumingXie Notes: 1)AdocumentortypeofdocumentcanonlyhaveONEtypeofconfidentiality! 2)Short-Termconfidentialityisinprinciplefor45daysfromdateofgrant;itcanbeextendedmax3times(totaltime180daysmax.)! TheplanneddateshouldstatedintheRF731applicationform. 3)FCCmustbeinformedwhenmarketingbeginsearlier. 4)Releasetakesplaceautomaticallythusextensionmustberequestedintime.Teleficationdoesnotremindyouofthis! 5)RequestforextensionorforreleasemustbereceivedbyTeleficationatleast7daysbeforedateofactualmarketingorbefore expirationoftheSTCperiod

The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited according to the ISO/IEC 17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Kevin Li Authorized Signatory BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 TECHNICAL COMPLIANCE STATEMENT This is to certify that the product listed in follows was (were) tested in the BTL EMC Laboratory to comply with below FCC official limits. Equipment Hybrid STB Brand Name ZTE Model Name ZXV10 B820C-A15 Applicant ZTE Corporation Address ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Standard(s) FCC Part 15, Subpart B Class B ANSI C63.4-2014 Report(s) BTL-FCCE-1-1912H040

ZTECorporation AdHocModeDeclaration Date:2020-02-22 We,theundersignedcompany CompanyName:ZTECorporation Address:ZTEPlaza,Hi-techPark,NanshanDistrict,Shenzhen,GuangdongChina518057 Declarethat: Productdescription:HybridSTB Typedesignation:ZXV10B820C-A15 Brand:ZTE FCCID:Q78-ZXV10B820CA15 1.TheEUTdoesn’thaveAdHocModefunctionon“non-USfrequencies”.802.11a/nAdHoc modeshouldnotbesupportedevenonUSDFSfrequencies(5250MHz-5350MHz, 5470MHZ-5725MHZ). 2.Inaddition,TheproductmeetsallotherrequirementsspecifiedinPart15ESection15.407andno configurationcontrolsareprovidedtochangethefrequencyofoperationsoutsidethegrantof certificationforUSoperation. 3.Onlychannels1~11willbeusedinUSA.Countrycodeselectionisdisabled. Ifyouhaveanyquestionsregardingtheauthorization,pleasedonothesitatetocontactus, thankyou~ Sincerely, Signature:_______________ Name:YumingXie Tel:0086-755-26777740 Email:[email protected]

Report No.: 1912H040 Page 1 of 19 ATTACHMENT PHOTOGRAPHS OF EUT Report No.: 1912H040 Page 2 of 19 Report No.: 1912H040 Page 3 of 19 Report No.: 1912H040 Page 4 of 19 Report No.: 1912H040 Page 5 of 19 Report No.: 1912H040 Page 6 of 19 Report No.: 1912H040 Page 7 of 19 Model: RD1201000-C55-35MGD Report No.: 1912H040 Page 8 of 19 Report No.: 1912H040 Page 9 of 19 Report No.: 1912H040 Page 10 of 19 Model: MN012E-L120100 Report No.: 1912H040 Page 11 of 19 Report No.: 1912H040 Page 12 of 19

Report No.: 1912H040 Page 13 of 19 Report No.: 1912H040 Page 14 of 19 Report No.: 1912H040 Page 15 of 19 Report No.: 1912H040 Page 16 of 19 Report No.: 1912H040 Page 17 of 19 Report No.: 1912H040 Page 18 of 19 2.4G/5G Ant. BT Ant. Report No.: 1912H040 Page 19 of 19 2.4G/5G Ant.

Report No.: BTL-FCCP-6-1912H040 Page 1 of 3 FCC RF EXPOSURE REPORT FCC ID: Q78-ZXV10B820CA15 Project No. : 1912H040 Equipment : Hybrid STB Brand Name : ZTE Test Model : ZXV10 B820C-A15 Series Model : N/A Applicant : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Manufacturer : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Date of Receipt : Jan. 13, 2020 Date of Test : Jan. 13, 2020~Feb. 16, 2020 Issued Date : Feb. 28, 2020 Report Version : R00 Test Sample : Engineering Sample No.: SH201912301 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Iscaa Min Approved by : Krain Wu Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-6-1912H040 Page 2 of 3 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue Feb. 28, 2020 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna For 2.4G Wifi Ant. Brand Model Name Antenna Type Connector Gain(dBi) 1 N/A N/A Internal N/A 4.4 2 N/A N/A Internal N/A 4.3 Note: The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and receivers (2T2R), all transmit signals are completely correlated, then, Direction gain= Directional gain =10log[(10G1/20+10G2/20+...10GN/20)2/N]dBi, that is Directional gain=10log[(104.4/20+104.3/20)2/2]dBi =7.36. So, the output power limit is 30-7.36+6=28.64, the power spectral density limit is 8-7.36+6=6.64. For 5G Wifi Ant. Brand Model Name Antenna Type Connector Gain(dBi) 1 N/A N/A Internal N/A 4.9 2 N/A N/A Internal N/A 4.9 Note: Antenna Gain=4.9 dBi. This EUT supports MIMO 2X2, any transmit signals are correlated with each other, so Directional gain = GAnt. 1+10log(N)dBi, that is Directional gain=4.9+10log(2)dBi=7.9; So,the UNII-1, UNII-2A,UNII-2C output power limit is 24-7.9+6=22.1. The UNII-3 output power limit is 30-7.9+6=28.1,The UNII-1, UNII-2A,UNII-2C power spectral density limit is 11-7.9+6=9.1 the UNII-3 power spectral density limit is 30-7.9+6=28.1. For BT: Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Internal N/A 2 For LE Ant. Brand Model Name Antenna Type Connector Gain (dBi) 1 N/A N/A Internal N/A 2 Report No.: BTL-FCCP-6-1912H040 Page 3 of 3 2. TEST RESULTS For BT: Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2 1.5849 6.50 4.4668 0.00141 1 Complies For LE: Antenna Gain (dBi) Antenna Gain (numeric) Max. Peak Output Power (dBm) Max. Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2 1.5849 2.00 1.5849 0.00050 1 Complies For 2.4GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 7.36 5.4450 27.50 562.3413 0.60947 1 Complies For 5GHz: Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 7.9 6.1660 19.00 79.4328 0.09749 1 Complies For the max simultaneous transmission MPE: BT+LE+2.4G+5G Power Density (S) (mW/cm 2 ) Power Density (S) (mW/cm 2 ) Power Density (S) (mW/cm 2 ) Total Limit of Power Density (S) (mW/cm 2 ) Test Result BT 2.4GHz 5GHz 0.00141 0.60947 0.61088 1 Complies 0.00141 0.09749 0.0989 1 Complies Note: The calculated distance is 20 cm. Output power including tune up tolerance. End of Test Report

Report No.:BTL-FCCP-2-1912H040 Page 172 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5745 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 173 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5745 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 174 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5745 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 175 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5745 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 176 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5785 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 177 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5785 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 178 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5785 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 179 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5785 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 180 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5825 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 181 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5825 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 182 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5825 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 183 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT20) Mode 5825 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 184 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5755 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 185 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5755 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 186 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5755 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 187 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5755 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 188 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5795 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 189 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5795 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 190 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5795 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 191 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT40) Mode 5795 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 192 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT80) Mode 5775 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 193 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT80) Mode 5775 MHz Vertical REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 194 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT80) Mode 5775 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 195 of 241 Orthogonal Axis X Test Mode UNII-3_TX AC (VHT80) Mode 5775 MHz Horizontal REMARKS: (1) Measurement Value = Reading Level + Correct Factor. (2) Margin Level = Measurement Value - Limit Value. Report No.:BTL-FCCP-2-1912H040 Page 196 of 241 APPENDIX D - BANDWIDTH Report No.:BTL-FCCP-2-1912H040 Page 197 of 241 Test Mode UNII-1_TX A Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Emission Bandwidth (MHz) 36 5180 18.89 16.50 40 5200 18.85 16.50 48 5240 18.85 16.50 CH36 CH40 CH48 Test Mode UNII-2A…

Text truncated - open the document above for the full version.

Report No.:BTL-FCCP-2-1912H040 Page 1 of 241 FCC Radio Test Report FCC ID:Q78-ZXV10B820CA15 This report concerns: Original Grant Project No. : 1912H040 Equipment : Hybrid STB Brand Name : ZTE Test Model : ZXV10 B820C-A15 Series Model : N/A Applicant : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Manufacturer : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Date of Receipt : Jan. 13, 2020 Date of Test : Jan. 13, 2020~Feb. 16, 2020 Issued Date : Feb. 28, 2020 Report Version : R00 Test Sample : Engineering Sample No.: SH201912301 Standard(s) : FCC Part15, Subpart E(15.407) ANSI C63.10-2013 FCC KDB 789033 D02 General UNII Test Procedures New Rules v02r01 FCC KDB 662911 D01 Multiple Transmitter Output v02r01 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Iscaa Min Approved by : Krain Wu Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.:BTL-FCCP-2-1912H040 Page 2 of 241 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.:BTL-FCCP-2-1912H040 Page 3 of 241 Table of Contents Page REPORT ISSUED HISTORY 5 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 7 2 . GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF EUT 8 2.2 TEST MODES 11 2.3 PARAMETERS OF TEST SOFTWARE 14 2.4 DUTY CYCLE 16 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 18 2.6 SUPPORT UNITS 18 3 . AC POWER LINE CONDUCTED EMISSIONS TEST 19 3.1 LIMIT 19 3.2 TEST PROCEDURE 19 3.3 DEVIATION FROM TEST STANDARD 19 3.4 TEST SETUP 20 3.5 EUT OPERATION CONDITIONS 20 3.6 TEST RESULTS 20 4 . RADIATED EMISSIONS TEST 21 4.1 LIMIT 21 4.2 TEST PROCEDURE 22 4.3 DEVIATION FROM TEST STANDARD 22 4.4 TEST SETUP 23 4.5 EUT OPERATION CONDITIONS 25 4.6 TEST RESULTS - 30 MHz TO 1000 MHz 25 4.7 TEST RESULTS - ABOVE 1000 MHz 25 5 . BANDWIDTH TEST 26 5.1 LIMIT 26 5.2 TEST PROCEDURE 26 5.3 TEST PROCEDURE 26 5.4 TEST SETUP 27 5.5 EUT OPERATION CONDITIONS 27 Report No.:BTL-FCCP-2-1912H040 Page 4 of 241 Table of Contents Page 5.6 TEST RESULTS 27 6 . MAXIMUM OUTPUT POWER TEST 28 6.1 LIMIT 28 6.2 TEST PROCEDURE 29 6.3 DEVIATION FROM STANDARD 29 6.4 TEST SETUP 29 6.5 EUT OPERATION CONDITIONS 29 6.6 TEST RESULTS 29 7 . POWER SPECTRAL DENSITY TEST 30 7.1 LIMIT 30 7.2 TEST PROCEDURE 30 7.3 DEVIATION FROM STANDARD 30 7.4 TEST SETUP 31 7.5 EUT OPERATION CONDITIONS 31 7.6 TEST RESULTS 31 8 . MEASUREMENT INSTRUMENTS LIST 32 9 . EUT TEST PHOTOS 34 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 37 APPENDIX B - RADIATED EMISSION - 30 MHZ TO 1 GHZ 42 APPENDIX C - RADIATED EMISSION - ABOVE 1000 MHZ 47 APPENDIX D - BANDWIDTH 196 APPENDIX E - CONDUCTED OUTPUT POWER 205 APPENDIX F - POWER SPECTRAL DENSITY 227 Report No.:BTL-FCCP-2-1912H040 Page 5 of 241 REPORT ISSUED HISTORY Report Version Description Issued Date R00 Original Issue. Feb. 28, 2020 Report No.:BTL-FCCP-2-1912H040 Page 6 of 241 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part15, Subpart E(15.407) Standard(s) Section Test Item Test Result Judgement Remark 15.207 15.407(b) AC Power Line Conducted Emissions APPENDIX A PASS ------ 15.407(b) 15.205(a) 15.209(a) Radiated Emissions APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.407(a) 15.407(e) Spectrum Bandwidth APPENDIX E PASS ------ 15.407(a) Maximum Output Power APPENDIX F PASS ------ 15.407(a) Power Spectral Density APPENDIX G PASS ------ 15.203 Antenna Requirements ------ PASS NOTE (3) 15.407(c) Automatically Discontinue Transmission ------ PASS NOTE (3) Note: (1) “N/A” denotes test is not applicable in this test report. (2) The device what use a permanently attached antenna were considered sufficient to comply with the provisions of 15.203. (3) During no any information transmission, the EUT can automatically discontinue transmission and become standby mode for power saving. the EUT can detect the controlling signal…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-3-1912H040 Page 1 of 20 FCC DFS Test Report FCC ID:Q78-ZXV10B820CA15 This report concerns: Original Grant Project No. : 1912H040 Equipment : Hybrid STB Brand Name : ZTE Test Model : ZXV10 B820C-A15 Series Model : N/A Applicant : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Manufacturer : ZTE Corporation Address : ZTE Plaza, Hi-Tech Park, Nanshan District, Shenzhen, Guangdong, P.R.China Date of Receipt : Jan. 13, 2020 Date of Test : Jan. 13, 2020~Feb. 16, 2020 Issued Date : Feb. 28, 2020 Report Version : R00 Test Sample : Engineering Sample No.: SH201912301 Standard(s) : FCC Part 15, Subpart E (Section 15.407) / FCC 06-96 RSS-247 Section 6 FCC KDB 789033 D02 General U-NII Test Procedures New Rules v02r01 FCC KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 FCC KDB 905462 D03 UNII Clients Without Radar Detection New Rules v01r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Iscaa Min Approved by : Krain Wu Add: No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Web: www.newbtl.com Report No.: BTL-FCCP-3-1912H040 Page 2 of 20 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NIST, A2LA, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of …

Text truncated - open the document above for the full version.