Q78ZXR10W200AW200A Wireless Access Point

ZXR10 WAS (V1.0) IP Wireless Access System W200A Wireless Access Point User’s Manual ZTE CORPORATION ZXR10 WAS (V1.0) IP Wireless Access System W200A Wireless Access Point User’s Manual Manual Version 20040306-R1.0 Product Version V1.0 BOM ×××××××× Copyright © 2003 ZTE Corporation All rights reserved. No part of this documentation may be excerpted, reproduced, translated, annotated or duplicated, in any form or by any means without the prior written permission of ZTE Corporation. ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China Website: http://www.zte.com.cn Post code: 518057 Customer Support Center: (+86755) 26770800 800-830-1118 Fax: (+86755) 26770801 E-mail: [email protected] * * * * S.N.: DDDDDDDDD FAX ： 0086-755-26770160 Suggestions and Feedback To improve the quality of ZTE product documentation and offer better services to our customers, we hope you can give us your suggestions and comments on our documentation and fax this form to 0086-755-26770160; or mail to “ ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China”. Our postcode is 518057. Document Name ZXR10 WAS (V1.0) IP Wireless Access System W200A Wireless Access Point User’s Manual Product version V1.0 Document version 20040306-R1.0 Equipment installation time Your information Name Company Postcode Company address Telephone E-mail Good Fair Average Poor Bad Overall Instructiveness Index Correctness Completeness Structure Illustration Your evaluation of this documentation Readability Overall Instructiveness Index Correctness Completeness Structure Illustration Your suggestion on the improvement of this documentation Readability Your other suggestions on ZTE product documentation Preface About This Manual This manual is used for ZXR10 WAS (V1.0) IP Wireless Access System W200A Wireless Access Point (hereinafter called W200A). ZXR10 (V1.0) IP Wireless Access System is developed independently by ZTE CORPORATION. It is composed of a range of wireless access products, including wireless network card and wireless router with combined functions of AP and DSL. This manual presents the functional characteristics, installation, operation, usage and maintenance of W200A, and is used as the operation guide for this product. This manual contains 8 chapter and 2 appendices. Chapter 1: Safety Instructions. It presents the safety requirements in operations and safety signs used in this manual. Chapter 2: Overview. It presents the functions, features and technical parameters of W200A. Chapter 3: Structure and Principle It presents the structure and principle of W200A. Chapter 4: Installation and Debugging It presents the installation and debugging methods for W200A. Chapter 5: Command Line Configurations It presents the command line configurations of W200A. Chapter 6: WEB configurations. It presents the web configurations of W200A. Chapter 7: Integrated GUI Management. It presents the integrated GUI Integration management of W200A. Chapter 8: Maintenance It presents the methods of routine maintenance and version upgrade. Appendix A: Package, Transportation and Storage It presents the packing methods, storage conditions and transportation requirements of W200A. Appendix B: Making Ethernet cables It presents the Ethernet power supplies for W200A and the methods to make network cables. Statement: The actual product may differ from what is described in this manual due to frequent update of ZTE products and fast development of technologies. Please contact the local ZTE office for the latest updating information of the product. -i- Contents 1 Safety Statements .................................................................................................................................... 1-1 1.1 Safety Precautions.......................................................................................................................... 1-1 1.2 Symbol Description........................................................................................................................ 1-2 2 Overview .................................................................................................................................................. 2-1 2.1 Introduction .................................................................................................................................... 2-1 2.2 Functions and Features................................................................................................................... 2-1 2.3 Technical Characteristics and Parameters ...................................................................................... 2-2 3 Structure and Principle........................................................................................................................... 3-1 3.1 Structure and Working Principle .................................................................................................... 3-1 3.2 Units and Components ................................................................................................................... 3-1 3.2.1 Front Panel .......................................................................................................................... 3-1 3.2.2 Rear Control Panel .............................................................................................................. 3-2 3.3 Network Mode ............................................................................................................................... 3-3 4 Installation and Debugging .................................................................................................................... 4-1 5 Command Line Configurations ............................................................................................................. 5-1 5.1 Overview ...............................................................................................................................…

Text truncated - open the document above for the full version.

11b wireless card block diagram 802.11b MAC/ BBP pcmcia connector pcmcia bus I/Q Modulator/De modulator and Synthesizer 2.4GHz RF/IF Converter 2.4GHz Power Amplif ier RF sw itc h flash X'TAL 44MHZ antenna sram IF filter X'TAL 3 2 KHZ

ZTE Corporation Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: Q78-ZXR10W200A Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: (1)Schematics (2)Part lists (3)Layouts The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, (signature) (printed name): Wang Zhenying

EXHIBIT B - EUT PHOTOGRAPHS EUT – View (1) EUT – View (2) EUT – View (3) EUT – View (4) EUT – View (5) Antenna – TDJ-2400BKF-Y View (1) Antenna –TDJ-2400BKF-Y View (2)

Reverse Polarity SMA Connector

EXHIBIT A - FCC ID LABEL INFORMATION Proposed FCC ID Label Specifications : Text is black or white in color and is left justified. Labels are silk- screened and shall be “permanently affixed” at a conspicuous location on the EUT. Proposed Label Location on EUT Bottom Side of EUT/FCC ID Label FCC ID: I38-NA8300-001 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.1875" 1.0" FCC ID:Q78ZXR10W200A FCC ID: I3 8- NA 83 00 -00 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2 .187 5" 1.0 "

EXHIBIT B - EUT INTERNAL PHOTOGRAPHS EUT - Uncovered View (1) EUT - Uncovered View (2) EUT - Uncovered View (3) EUT - Uncovered View (4) EUT - Inside View (1) EUT - Inside View (2) EUT - PCB View (1) EUT - PCB View (2) EUT - PCB View (3) EUT - PCB View (4)

Circuit Description 1. Data transmission from wired to wireless Data packets are transmitted to Ethernet PHY D7 (L80223) via X2 (RJ45) interface and then transmitted to D1 (S3C4510B) via MII interface. After the processing of CPU, data are transmitted to wireless network card X6 (NL-2511CD) via PCMCIA interface. Signals will then be transmitted via the antenna on the wireless network card after the processing of the card. 2. Data retransmission from wireless to wired The wireless network card (NL-2511CD) processes packet signals received via the antenna and sends them to D1 (S3C4510B) via X6 PCMCIA interface. After the processing of CPU, signals will be transmitted to Ethernet D7 (L80223) via MII interface. Ethernet packets will then be sent out via RJ45. 3. Converting 48V to 5V An external power supply provides the card with 48V power via X2 (RJ45). Passing commutation diode VD10, VD17-VD19 (IN4004L) and then common-mode filter L3 (SH312), the current will enter the transformer converting 48V to 5V and output 5V power. D20 (UC3842) is used to control the on-off of the VT1 (IRF630) switching tube so that DC can be converted to AC via the transformer.

ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 34 of 65 FCC Part 15.247 Test Report §15.247(b)(3) - PEAK OUTPUT POWER MEASUREMENT Standard Applicable According to §15.247(b) (3), for systems using digital modulation in 2400-2483.5 MHz: 1 Watt Measurement Procedure 1. Place the EUT on a bench and set it in transmitting mode. 2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to a spectrum analyzer. 3. Add a correction factor to the display. Test Equipment List and Details Manufacturer Description Model Serial Number Calibration Date Calibration Due Date R/S Spectrum Analyzer FSEM 849720/019 2003-10-30 2004-10-29 Measurement Result Environmental Conditions Temperature: 24° C Relative Humidity: 63% ATM Pressure: 1100 mbar 2.4GHz-2.4835GHz Peak power output BPSK 802.11b Channel Frequency (MHZ) RF Power (dBm) Correction Factor (dB) Corrected RF power (dBm) Limit Result Low Channel 2412 7.04 8.48 15.52 1w (30dBm) Pass Middle Channel 2437 7.74 8.89 16.63 1w (30dBm) Pass High Channel 2462 6.02 7.80 13.82 1w (30dBm) Pass EUT SA ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 35 of 65 FCC Part 15.247 Test Report 2.4GHz-2.4835GHz Peak power output QPSK 802.11b Channel Frequency (MHZ) RF Power (dBm) Correction Factor (dB) Corrected RF power (dBm) Limit Result Low Channel 2412 7.16 8.55 15.71 1w (30dBm) Pass Middle Channel 2437 5.46 7.37 12.83 1w (30dBm) Pass High Channel 2462 6.70 8.26 14.96 1w (30dBm) Pass 2.4GHz-2.4835GHz Peak power output CCK 802.11b Channel Frequency (MHZ) RF Power (dBm) Correction Factor (dB) Corrected RF power (dBm) Limit Result Low Channel 2412 7.10 8.51 15.61 1w (30dBm) Pass Middle Channel 2437 6.27 7.97 14.24 1w (30dBm) Pass High Channel 2462 6.61 8.20 14.81 1w (30dBm) Pass ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 36 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) Low Channel BPSK 802.11b (2.4GHz-2.4835GHz) Middle Channel BPSK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 37 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) High Channel BPSK 802.11b (2.4GHz-2.4835GHz) Low Channel QPSK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 38 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) Middle Channel QPSK 802.11b (2.4GHz-2.4835GHz) High Channel QPSK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 39 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) Low Channel CCK 802.11b (2.4GHz-2.4835GHz) Middle Channel CCK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 40 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) High Channel CCK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 41 of 65 FCC Part 15.247 Test Report §15.247(a)(2) – 6 DB BANDWIDTH Standard Applicable According to §15.247(a)(2), for digital modulation techniques, the minimum 6dB bandwidth shall be at least 500 kHz. Measurement Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT without connection to measurement instrument. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. 3. Measure the frequency difference of two frequencies that were attenuated 6 dB from the reference level. Record the frequency difference as the emission bandwidth. (6 dB bandwidth for DTS) 4. Repeat above procedures until all frequencies measured were complete. Test Equipment List and Details Manufacturer Description Model Serial Number Calibration Date Calibration Due Date R/S Spectrum Analyzer FSEM 849720/019 2003-10-30 2004-10-29 Measurement Result Environmental Conditions Temperature: 24° C Relative Humidity: 63% ATM Pressure: 1100 mbar 2.4GHz-2.4835GHz 6dB bandwidth BPSK 802.11b Channel Frequency (MHz) Measured (MHz) Standard (kHz) Result Low Channel 2412 9.72 ≥ 500 Pass Middle Channel 2437 10.12 ≥ 500 Pass High Channel 2462 10.12 ≥ 500 Pass ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 42 of 65 FCC Part 15.247 Test Report 2.4GHz-2.4835GHz 6dB bandwidth QPSK 802.11b Channel Frequency (MHz) Measured (MHz) Standard (kHz) Result Low Channel 2412 10.02 ≥ 500 Pass Middle Channel 2437 10.12 ≥ 500 Pass High Channel 2462 9.91 ≥ 500 Pass 2.4GHz-2.4835GHz 6dB bandwidth CCK 802.11b Channel Frequency (MHz) Measured (MHz) Standard (kHz) Result Low Channel 2412 11.42 ≥ 500 Pass Middle Channel 2437 11.92 ≥ 500 Pass High Channel 2462 11.32 ≥ 500 Pass ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 43 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) Low Channel BPSK 802.11b (2.4GHz-2.4835GHz) Middle Channel BPSK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 44 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) High Channel BPSK 802.11b (2.4GHz-2.4835GHz) Low Channel QPSK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 45 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) Middle Channel QPSK 802.11b (2.4GHz-2.4835GHz) High Channel QPSK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 46 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) Low Channel CCK 802.11b (2.4GHz-2.4835GHz) Middle Channel CCK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 47 of 65 FCC Part 15.247 Test Report (2.4GHz-2.4835GHz) High Channel CCK 802.11b ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610RptRpt Page 48 of 65 FCC Part 15.247 Test Report §15.247(d) - POWER SPECTRAL DENSITY Standard Applicable According to §15.247 (d), for direct sequence systems, the peak power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 d…

Text truncated - open the document above for the full version.

Note: This test report is specially limited to the above client company and product model only. It may not be duplicated without prior written consent of Bay Area Compliance Laboratory Corporation. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government FCC PART 15.247 EMI MEASUREMENT AND TEST REPORT For ZTE Coporation ZTE Plaza, Hi-Tech Industrial Park, Shenzhen, P. R. China FCC ID: Q78ZXR10W200A 2004-04-22 This Report Concerns: Original Report Equipment Type: Transceiver, Access Point Test Engineer: Jandy Su Report No.: RSH04031610 Test Date: April 1-8, 2004 Reviewed By: Chris Zheng Prepared By: Bay Area Compliance Lab Corp. ShenZhen Suite C, 41-D Electronics Science & Technology Building, No. 2070 Shennanzhong Rd ShenZhen, Guandong 518031, P.R. China Tel: 86-755- 83296449 Fax: 86-755- 83273756 ZTE Coporation FCC ID: Q78ZXR10W200A Report # RSH04031610Rpt.docRpt Page 2 of 65 FCC Part 15.247 Test Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................4 OBJECTIVE...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................4 TEST METHODOLOGY..................................................................................................................................................4 TEST FACILITY.............................................................................................................................................................4 HOST SYSTEM CONFIGURATION LIST AND DETAILS....................................................................................................5 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS........................................................................................................5 EXTERNAL I/O CABLE.................................................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 JUSTIFICATION.............................................................................................................................................................6 EUT EXERCISE SOFTWARE..........................................................................................................................................6 SPECIAL ACCESSORIES.................................................................................................................................................6 SCHEMATICS / BLOCK DIAGRAM.................................................................................................................................6 EQUIPMENT MODIFICATIONS.......................................................................................................................................6 CONFIGURATION OF EUT.............................................................................................................................................7 TEST SETUP BLOCK DIAGRAM.....................................................................................................................................7 SUMMARY OF TEST RESULTS ...............................................................................................................................8 §1.1307(B)(1) & §2.1091 - RF EXPOSURE.................................................................................................................9 §15.207(A) - CONDUCTED EMISSIONS.................................................................................................................10 MEASUREMENT UNCERTAINTY..................................................................................................................................10 EUT SETUP................................................................................................................................................................10 SPECTRUM ANALYZER SETUP....................................................................................................................................11 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................11 TEST PROCEDURE......................................................................................................................................................11 TEST DATA................................................................................................................................................................12 PLOT(S) OF TEST DATA..............................................................................................................................................13 §15.247(C) - ANTENNA PORT CONDUCTED SPURIOUS EMISSION TEST (30M-25G) ..............................18 STANDARD APPLICABLE............................................................................................................................................18 MEASUREMENT PROCEDURE......................................................................................................................................18 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................18 MEASUREMENT RESULT..............................................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT C - TEST SETUP PHOTOGRAPHS AC Power Conducted Emission - Front View AC Power Conducted Emission - Side View DC Power Conducted Emission - Front View DC Power Conducted Emission - Side View AC Power Antenna 9902-24-02-300/9902-24-02-110: Radiated Emission - Front View AC Power Antenna 9902-24-02-300/9902-24-02-110: Radiated Emission - Rear View DC Power Antenna 9902-24-02-300/9902-24-02-110: Radiated Emission - Front View DC Power Antenna 9902-24-02-300/9902-24-02-110: Radiated Emission - Rear View AC Power Antenna TDJ-2400BKF-Y: Radiated Emission - Front View AC Power Antenna TDJ-2400BKF-Y: Radiated Emission - Rear View DC Power Antenna TDJ-2400BKF-Y: Radiated Emission - Front View DC Power Antenna TDJ-2400BKF-Y: Radiated Emission - Rear View