Q8IAIS200AI80AIS200 Simrad AI80

User manual Man_user_AI80_r2 i User Manual AI80 Automatic Identification System This manual is intended as a reference guide for operating the Simrad AI80 Automatic Identification System. Simrad AI80 User Manual ii Man_user_AI80_r2 Document revisions Rev Date Written by Checked by Approved by 0 17.09.04 ISt KKr KKr 1 12.11.04 ISt KKr KKr 2 17.11.04 ISt KKr KKr Document history Rev. 0 First edition. Rev. 1 Type approval certificate and declaration of conformity included. Rev. 2 FCC statements included. To assist us in making improvements to this manual, we would welcome comments and constructive criticism. Please send all such - in writing to: Kongsberg Seatex AS Pirsenteret N-7462 Trondheim, Norway or by e-mail to: [email protected] User manual Man_user_AI80_r2 iii About this manual This manual is intended as a reference guide for operating the Simrad AI80 Automatic Identification System. In this manual, references to buttons on the control unit are written in boldface, and in a different text style (e.g. VIEW button, SHIFT button, ENTER button). Important text that requires special attention from the reader is emphasized as follows: Note! Used to draw the readerís attention to a comment or some important information. Caution! Used to warn the reader that a risk of damage to the equipment exists if care is not exercised. WARNING! Used when it is necessary to warn personnel that a risk of injury or death exists if care is not exercised. FCC part 15 statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a marine and/or commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. The equipment is not inteded for operation in a residential area. Operation in such an area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Additional information to the user Changes or modifications not expressly approved by Kongsberg Seatex AS will void the user's authority to operate the equipment. Simrad AI80 User Manual iv Man_user_AI80_r2 This manual is divided in the following sections: 1. System overview An overview of the AI80 system and its components. 2. User interface An overview of the AI80 user interface, display pages and menus and the Minimum Keyboard and Display (MKD) unit. 3. Software setup procedure Initial software parameters that have to be entered before the system is ready to use. 4. Operation Main operating procedures for using the AI80 system. 5. Appendix A - Operating procedures optional MKD Describes the operating procedure when using the optional MKD. 6. Appendix B - Software setup using optional MKD Initial software parameters that have to be entered before the system is ready to use when using the optional MKD. 7. Appendix C - Type approval certificate Copy of type approval certificate included. 8. Appendix D - Declaration of conformity Copy of Declaration of Conformity included. User manual Man_user_AI80_r2 v Abbreviations and acronyms AIS Universal Ship-borne Automatic Identification System AIS 1 161.975 MHz (87B ñ 2087) AIS 2 162.025 MHz (88B ñ 2088) ALR Alarm ATN Aids to Navigation BS Base Station COG Course Over Ground DSC Digital Selective Calling ETA Estimated Time of Arrival GPS Global Positioning System HDG Heading ICMP Internet Control Message Protocol IMO International Maritime Organisation LED Light Emitting Diode LR Long Range MKD Minimum Keyboard Display MMSI Maritime Mobile Service Identity MSG Message N/A Not Applicable PI Presentation Interface PWR Power ROT Rate of Turn RTCM Radio Technical Commission of Maritime Service RX Receive SMS Short Message Service SOG Speed Over Ground SWR Standing Wave Ratio TX Transmit UTC Universal Co-ordinated Time VDL VHF Data Link VDO VHF Data Link Own Vessel Message VHF Very High Frequency VTS Vessel Traffic Service Simrad AI80 User Manual vi Man_user_AI80_r2 Contents 1 SYSTEM OVERVIEW..........................................................................................1 1.1 General............................................................................................................1 Coverage .........................................................................................................2 AIS information content .................................................................................2 1.2 System components ........................................................................................4 2 USER INTERFACE...............................................................................................7 2.1 AI80 user interface .........................................................................................7 Display ............................................................................................................7 Keypad ............................................................................................................7 LED indicators................................................................................................7 2.2 Buttons ............................................................................................................8 2.3 Using display and keypad.............................................................................10 Manoeuvring and selecting...........................................................................10 Dialogue boxes .............................................................................................10 Editing ..........................................................................................................11 Information .............................…

Text truncated - open the document above for the full version.

Installation manual Man_inst_AI80_r1 i Installation Manual AI80 Automatic Identification System This manual is intended as a reference guide for installing and maintaining the Simrad AI80 Automatic Identification System. Simrad AI80 Installation Manual ii Man_inst_AI80_r1 Document revisions Rev Date Written by Checked by Approved by 0 17.09.04 ISt KKr KKr 1 17.11.04 ISt KKr KKr Document history Rev. 0 First edition. Rev. 1 FCC statements included. To assist us in making improvements to this manual, we would welcome comments and constructive criticism. Please send all such - in writing to: Kongsberg Seatex AS Pirsenteret N-7462 Trondheim, Norway or by e-mail to: [email protected] Installation manual Man_inst_AI80_r1 iii About this manual This manual is intended as a reference guide for installing and maintaining the Simrad AI80 Automatic Identification System. In this manual, references to buttons on the control unit are written in boldface, and in a different text style (e.g. VIEW button, SHIFT button, ENTER button). Important text that requires special attention from the reader is emphasized as follows: Note! Used to draw the readerís attention to a comment or some important information. Caution! Used to warn the reader that a risk of damage to the equipment exists if care is not exercised. WARNING! Used when it is necessary to warn personnel that a risk of injury or death exists if care is not exercised. FCC part 15 statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a marine and/or commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. The equipment is not inteded for operation in a residential area. Operation in such an area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Additional information to the user Changes or modifications not expressly approved by Kongsberg Seatex AS will void the user's authority to operate the equipment. Simrad AI80 Installation Manual iv Man_inst_AI80_r1 This manual is divided in the following sections: 1. Technical specifications Specifications for the system and for all separate units in the AI80 system.. 2. Installation Reference guide for correct installation of the AI80 system. 3. Connecting and configuring external equipment Describes how external equipment is connected to the AI80 system. 4. Software setup procedure Reference guide for correct configuration of the AI80 system. 5. Maintenance Reference guide for correct configuration of the AI80 system. 6. Troubleshooting Troubleshooting procedures that could be performed for checking hardware and external interface. 7. Spare parts list Part numbers for all standard and optional units that may be included in the AI80 system. 8. Appendix A Vessel identifiers. 9. Appendix B IEC 61162-1, IEC/PAS 6162-100 sentence description. 10. Appendix C Software setup procedure using external, optional MKD. 11. Appendix D AIS troubleshooting form. 12. Appendix E Optional VHF antenna. Installation manual Man_inst_AI80_r1 v Abbreviations and acronyms ABK Addressed and Binary Broadcast Acknowledgement ABM Addressed Binary and Safety Related Message ACA AIS Regional Channel Assignment AIS Universal Ship-borne Automatic Identification System AIS 1 161.975 MHz (87B ñ 2087) AIS 2 162.025 MHz (88B ñ 2088) ALR Alarm ARPA Automatic Radar Plotting Aid ASCII American Standard Code for Information Interchange ATN Aids to Navigation BIIT Built In Integrity Tests COG Course Over Ground DGPS Differential GPS DGNSS Differential Global Navigation Satellite System DSC Digital Selective Calling ECDIS Electronic Chart Display and Information System ECS Electronic Chart System EMC Electromagnetic Compatibility ETA Estimated Time of Arrival FATDMA Fixed Allocation TDMA GNSS Global Navigation Satellite System GPS Global Positioning System IALA International Association of Lighthouse Authorities IEC International Electrotechnical Commission IMO International Maritime Organisation LR Long Range MKD Minimum Keyboard Display MMSI Maritime Mobile Service Identity MSG Message N/A Not Applicable NMEA National Marine Electronics Association Simrad AI80 Installation Manual vi Man_inst_AI80_r1 PI Presentation Interface PPS Pulse-per-second PUR Polyurethane PWR Power ROT Rate of Turn RTCM Radio Technical Commission of Maritime Service RX Receive SAR Search and Rescue SMS Short Message Service SOG Speed Over Ground SOTDMA Self Organising TDMA TBD To Be Defined TDMA Time Division Multiple Access TX Transmit TXT Text Message UTC Universal Co-ordinated Time VDL VHF Data Link VDM VHF Data Link Message VDO VHF Data Link Own Vessel Message VHF Very High Frequency Installation manual Man_inst_AI80_r1 vii Contents 1 TECHNICAL SPECIFICATIONS.......................................................................1 1.1 Health, environment and safety ......................................................................1 1.2 Restrictions in guarantee ................................................................................1 1.3 Power ..............................................................................................................1 1.4 Data input .......................................................................................................1 1.5 Specifications..................................................................................................2 AI80 Mobile Unit ...........................................................................................2 AI80 Minimum Keyboard Display (MKD) ....................................................5 GPS antenna (GPS…

Text truncated - open the document above for the full version.

Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency Test Report No.. 734.2/0047-6/2004 / S3220Date: 21.10.2004page 87 of 90 Annex D Photos of equip m ent under test D.1 Tra n spo nd er U ni t Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency Test Report No.. 734.2/0047-6/2004 / S3220Date: 21.10.2004page 88 of 90 D.2 MKD unit Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency Test Report No.. 734.2/0047-6/2004 / S3220Date: 21.10.2004page 89 of 90 D.3 GPS antenna

FCC_ID_ label_txt_location.docPage 1 of 2 AUTOMATIC IDENTIFICATION SYSTEM FCC ID label AIS 200/Simrad AI 80 and location of label on product Figure 1 FCC ID label - text On the AIS 200/Simrad AI 80 mobile unit, labels will be located on two places located at rear part of the cabinet. One set of labels is placed on the extension of the bottom plate of the unit to the left of the main product label (figure 2), and the second set is placed on the rear cover (figure 3). The rear cover is removable as shown on the pictures below and when the cover is removed the other labels will be visible. Figure 2 FCC ID label on bottom plate - rear FCC ID Q8IAIS200AI80 FCC ID
FCC_ID_ label_txt_location.docPage 2 of 2 Figure 3 FCC ID label on rear cover FCC ID

ANNEX 5 Test report no. 04 / 662 / 3 Page 2 of 3 Comlab N-2027 Kjeller Simrad AI 80 AIS ANNEX 5 Test report no. 04 / 662 / 3 Page 3 of 3 Comlab N-2027 Kjeller Simrad AI 80 AIS

Test report no. 04/662/7 page 2 of 28 1 GENERAL INFORMATION 3 1.1 Test Laboratory 3 1.2 Client Information 3 1.2.1 Manufacturer 3 2 TEST INFORMATION 4 2.1 Test Item 4 2.2 Test Environment 4 2.2.1 Normal Test Conditions 4 2.3 Test Period 4 2.4 Standards and Regulations 4 2.5 Test Engineers 4 2.6 Additional information 4 2.6.1 Test Methods 4 2.6.2 Test Equipment 4 3 TEST REPORT SUMMARY 5 3.1 Abbreviations 5 4 OTHER COMMENTS 6 4.1 General: 6 4.2 EUT (Equipment Under Test): 6 4.3 List of ports: 6 4.4 RF disturbance tests: 6 4.5 RF immunity tests: 6 4.6 Performance Criteria 6 5 EMISSION MEASUREMENTS 7 5.1 Radiated Disturbance at Enclosure Port EN 55022 (CISPR 22) 7 5.2 Conducted Emission at DC power Ports. IEC 60945 Clause 9.2 8 6 IMMUNITY AT ENCLOSURE PORT 9 6.1 Electromagnetic Field Immunity at Enclosure port, IEC 60945 Clause 10, EN 61000-4-3 9 6.2 Electrostatic Discharge (ESD) Immunity Test. EN 61000-4-2 Main AIS transceiver unit. 10 7 CONDUCTED IMMUNITY 11 7.1 Conducted radio-frequency immunity test at DC power port, IEC 60945, IEC 61000-4-6 11 7.2 Lloyds TA1, part 22.3 conducted low-frequency immunity test at DC power port, IEC 61000-4-16 12 7.3 Conducted immunity at signal port, IEC 60945 Clause 10, IEC 61000-4-6. 13 7.4 Electrical Fast Transient/Burst (EFT/B) Immunity test at signal ports IEC 60945 Clause 10.5, IEC 61000-4-4 14 7.5 Electrical Fast Transient/Burst (EFT/B) Immunity Test at DC port IEC 60945 Clause 10.5, IEC 61000-4-4 15 7.6 Power supply failure i.e. voltage interruption IEC 60945 Clause 10.8 16 8 TEST EQUIPMENT AND ANCILLARIES USED FOR TESTS 17 9 PLOT OF EMISSION MEASUREMENTS 18 9.1 Radiated emission 0,15 - 30 MHz. 18 9.2 Radiated emission 30 - 200 MHz (horizontal). 19 9.3 Radiated emission 30 - 200 MHz (vertical). 20 9.4 Radiated emission 200 - 1000 MHz (horizontal). 21 9.5 Radiated emission 200 - 1000 MHz (vertical). 22 9.6 Radiated emission 1000 - 2000 MHz (horizontal). 23 9.7 Radiated emission 1000 - 2000 MHz (vertical). 24 9.8 Conducted emission AI 80 AIS on DC Mains 10-150 kHz. 25 9.9 Conducted emission of DC Mains 0,15 – 30 MHz. 26 10 TEST SET-UP 27 11 PHOTO OF TEST SET UP 28 Test report no. 04/662/7 page 3 of 28 1 GENERAL INFORMATION 1.1 Test Laboratory Name : Nemko Comlab AS Address : Gåsevikveien 8, P.O.Box 96 N-2027 Kjeller, Norway Telephone : +47 64 84 57 00 Fax : +47 64 84 57 05 E-mail : [email protected] Managing Director: Kjell G. Haga Nemko Comlab is granted accreditation by Norwegian Accreditation under the registration TEST 031 1.2 Client Information Name : Kongsberg Seatex AS Address : Pirsenteret N-7462 Trondheim Telephone : +47 73 54 55 00 Fax : +47 73 51 50 20 Contact: Name : Sigfred Avdal E-mail : [email protected] 1.2.1 Manufacturer Same as Client Test report no. 04/662/7 page 4 of 28 2 TEST INFORMATION 2.1 Test Item Name : Simrad AI 80 / AIS 200 (Kongsberg Seatex) Model/version : AI 80 v.1.0 Remarks The EUT consists of 2 parts; EUT 1 (AI 80 Class A Mobile Starion, Part Id: A101-11_1) and EUT 2 (Simrad AI80 MKD, Part Id: A101-12_1) see page 27 for test setup. The EUT was powered by a 24 VDC power supply. For ESD testing the first and second versions showed some upset that required undesired manual intervention. The third sample used the electronics from “Radio testing” installed in slightly upgraded version of mechanical case. “Watch dog” facilities were used to ensure automatic reboot for the cases of upset. 2.2 Test Environment 2.2.1 Normal Test Conditions Temperature: 22,0-24,5 °C Relative humidity: 30,6-52,31 % Normal test voltage: 234,8-239,5 V AC Main frequency: 50 Hz The values are the limits registered during the test period. 2.3 Test Period Test item received date: 14.6.2004 Test period: From 09.08.2004 to 27.08.2004 2.4 Standards and Regulations IEC 60945 Fourth edition 2002-08 Lloyds TA1, part 22.3 2002, (IEC 61000-4-16: ed 1.1 2002-07) 2.5 Test Engineers Tore Løvlien, Per Magne Tveiten 2.6 Additional information 2.6.1 Test Methods Described in relevant basic standards. 2.6.2 Test Equipment List of used test equipment, see page no. 18 Test report no. 04/662/7 page 5 of 28 3 TEST REPORT SUMMARY 3.1 Abbreviations P Passed, the equipment fulfils the requirement F Failed, the equipment does not fulfil the requirement NA Not applicable, the requirement is not applicable NT Not tested, the test is not performed even though the requirement is relevant Test Summary Basic Standard Port Measurement Result (Pass/Fail) IEC 60945 Clause 9.2 DC port Conducted emission P IEC 60945 Clause 9.3 Enclosure port Radiated emission P IEC 60945 Clause 10.3 DC port Immunity to conducted radio frequency disturbance P EIT 60945 Clause 10.3 Signal port Immunity to conducted radio frequency disturbance P IEC 60945 Clause 10.5 IEC 61000-4-4 (1995) Signal port Electrical fast transient/burst (EFT/B) immunity test P IEC 60945 Clause 10.5 IEC 61000-4-4 (1995) DC port Electrical fast transient/burst (EFT/B) immunity test P IEC 60945 Clause 10.4 Enclosure port Immunity to radiated radio frequency P IEC 60945 Caluse 10.8 DC Power Failure i.e. voltage interruption, 60s P IEC 60945 Clause 10.9 IEC 61000-4-2 (1995) Enclosure Electrostatic discharge (ESD) immunity test P Lloyds TA1, part 22.3 IEC 61000-4-16 DC Conducted low frequency interference 50-10 kHz P Test report no. 04/662/7 page 6 of 28 4 OTHER COMMENTS 4.1 General: The RF field tests are performed in a 10 meter semi anechoic room. 4.2 EUT (Equipment Under Test): The EUT is an AIS transceiver for maritime use consisting of a Radio Module, EUT 1 (Simrad AI 80 or Kongsberg Seatex AIS 200) and Display/Keyboard unit, EUT 2 (Simrad AI80 MKD). See page 27 for test set-up. 4.3 List of ports: Signal ports: Data RS 422 VHF GPS Remote Power ports: Screened 24 V DC 4.4 RF disturbance tests: During the RF field emission test the EUT was rotated in the test chamber and measured with the test antenna both vertical and horizontal. 4.5 RF immunity tests: The RF field immunity tests are performed at 3 meter distance with abso…

Text truncated - open the document above for the full version.

Test report no.04 / 662 / 3 page 2 of 33 CONTENTS 1 GENERAL INFORMATION 4 1.1 Test Laboratory ..............................................................................................................................4 1.2 Client Information ...........................................................................................................................4 1.3 Manufacturer ..................................................................................................................................4 2 TEST INFORMATION 5 2.1 Test Item ........................................................................................................................................5 2.2 Standards and Regulations............................................................................................................5 2.3 Test Environment ...........................................................................................................................5 2.3.1 Normal Test Conditions .................................................................................................................5 2.3.2 Extreme Test Conditions................................................................................................................6 2.4 Test Period.....................................................................................................................................6 2.5 Test Engineer.................................................................................................................................6 2.6 Additional Information ....................................................................................................................6 2.6.1 Test Methods .................................................................................................................................6 2.6.2 Selection Criteria............................................................................................................................6 3 TEST REPORT SUMMARY 7 3.1 Abbreviations .................................................................................................................................7 3.2 Test Summary................................................................................................................................7 4 TEST RESULTS 8 4.1 Transmitter Measurements ............................................................................................................8 4.1.1 Frequency Error .............................................................................................................................8 4.1.2 Carrier Power .................................................................................................................................9 4.1.3 Carrier Power ...............................................................................................................................10 4.1.4 Modulation Spectrum 25kHz channel mode ................................................................................11 4.1.5 Modulation Spectrum 12.5kHz channel mode .............................................................................11 4.1.6 Transmitter Attack Time...............................................................................................................12 4.1.7 Transmitter Release Time............................................................................................................13 4.2 DSC Transmissions .....................................................................................................................14 4.2.1 Frequency error of the DSC Signal..............................................................................................14 4.2.2 Modulation Rate ...........................................................................................................................14 4.3 TDMA Receivers ..........................................................................................................................15 4.3.1 Sensitivity – 25kHz Operation......................................................................................................15 4.3.2 Sensitivity – 12.5kHz Operation...................................................................................................16 4.3.3 Error Behaviour at High Input Levels ...........................................................................................17 4.3.4 Co-Channel Rejection - 25kHz Operation ...................................................................................18 4.3.5 Co-Channel Rejection - 12.5kHz Operation ................................................................................19 4.3.6 Adjacent Channel Selectivity – 25kHz Operation ........................................................................20 4.3.7 Adjacent Channel Selectivity – 12.5kHz Operation .....................................................................21 4.3.8 Spurious Response Rejection......................................................................................................22 4.3.9 Intermodulation Response Rejection and Blocking .....................................................................23 4.3.10 Transmit to Receive Switching Time ...........................................................................................24 4.4 DSC Receiver ..............................................................................................................................25 4.4.1 Maximum Sensitivity ....................................................................................................................25 4.4.2 Error Behaviour at High Input Levels ...........................................................................................26 4.4.3 Co-Channel Rejection..................................................................................................................27 4.4.4 Adjacent Channel Selectivity .....................…

Text truncated - open the document above for the full version.