QBTLTK-2008TECOASTER TRANSMITTER

LEE Technology Korea Co., Ltd. Programming Manual (Software Ver. 3.0) LEE TECHNOLOGY KOREA CO., LTD. email [email protected] website www.leetekorea.com KOREA HEADQUARTER US OFFICE 3 rd Fl. 499-2, Sang3-dong, 530 Highland Station Drive, Suite 2004, LEE Technology Korea Co., Ltd. Wonmi-gu, Bucheon City, Suwanee, GA 30024, U.S.A. Kyunggi-do, Korea Tel +82-32-324-9838 Tel +1-678-714-2161 Fax +82-32-324-9840 Fax +1-678-714-2162 Blue Tablecall Transmitter Programming Manual 1. Programming Install Please Click on this icon, and install the program on your computer. 2. Programming Install Please run the programming software of TableCall 3.0, and start the program. ⑩ The Program is launched as below: ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ LEE Technology Korea Co., Ltd. Blue Tablecall Transmitter Programming Manual 3. How to Program You have to click on “OPEN” button in the menu bar, and then all the setup function can be available. 1) Pager Number - You need to check all pager number and check all boxes to operate the transmitter. 2) Capcode - 7 digits Capcode numbers have to be entered. - Base ID (3 digits) + Pager Individual ID (4 digits) - If you wish to program the pager with number 1, then you have to enter 0008 for Pager ID. - For example : 1000008 (Base ID 100 & Pager number #1), 1000016 (Base ID 100 & Pager number #2) ...... - You have to enter in the box of all 5 capcodes. 3) Tone - With this button, you can set the pre-set message. (If you enter any messages in the Message box, then this function won’t work.) 4) Pager Type - With this button, you have to select Numeric type. 5) Message - You can enter the messages code number 01 to 20. If you enter 01 in the box of message, the message for 01 in the pager LEE Technology Korea Co., Ltd. programming software will be displayed on the pager. 6) Com Port - With this button, you can set the Com Port number. Blue Tablecall Transmitter Programming Manual 7) Frequency - Please do not change the frequency. 8) Data Rate - 512, 1200, 2400 BPS are available. (Default: 1200 BPS) 9) Save - With this button, you can save the information. 10) Load - With this button, you can load the information. 11) Write - With this button, you can write your message into the pager. 12) Read - With this button, you can read the pager. 13) Quit - With this button, you can exit from the program. 4. How to use 1) Press the button on the Transmitter. 2) The corresponding pager will be alert with pre-programmed message. 3) To stop the alert, press the side button of pager. LEE Technology Korea Co., Ltd. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER�S AUTHORITY TO OPERATE THE EQUIPMENT. Multicall Paging System User Manual IMPORTANT SAFTEY INFORMATION NOTICE This manual, software and electronic circuitry are copyrighted. All rights reserved. Under the copyright laws, this manual, software and electronic circuitry may not be copied, in whole or in part without written prior consent of Lee Technology. All information provided in this document is carefully prepared and offered in good faith as a guide in the installation, use and servicing of our products. Installers must ensure that the final installation operates satisfactorily within the relevant regulatory requirements. Lee Technology accepts no responsibility for incorrect installation. Lee Technology reserves the right to change products, specifications and installation data at any time without notice. Lee Technology makes certain limited warranties with respect to defective diskettes, documentation and electronic circuitry. Please see the associated information contained on this page. LIMITED WARRANTY With respect to the physical documentation and physical electronic circuitry enclosed herein, Lee Technology warrants the same to be free of defects in materials and workmanship for a period of one year from the date of purchase. In the event of notification within the warranty period of defects in material or workmanship, Lee Technology will replace the defective diskettes, documentation and electronic circuitry. The remedy for breach of this warranty shall be limited to replacement and shall not encompass any other damages including but not limited to loss of profit and special incidental, consequential, or other similar claims. Lee Technology Korea specifically disclaims all other warranties, expressed or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose with respect to defects in the documentation and electronic circuitry and the program license granted herein, in particular, and without limiting operation of the program license with respect to any particular application, use or purpose. LEE Technology Korea Co., Ltd. RF EXPOSURE STATSURE STATEMENT Your Pager Transmitter contains a radio frequency transmitter. When the button is pushed the transmitter sends our RF singnals. CAUTION : To comply with FCC RF exposure compliance requirements, A separation distance of at least 8 inches(20Cm) must be maintained Between the antenna of this transmitter and all persons, during Normal operation. The antenna used for this transmitter must not be co- Located or operating in conjunction with any other antenna of transmitter. Unauthorized antennas, modifications, of attachments could damage the Transmitter and may violate FCC regulations. For a Class A digital device or peripheral, the instructions finished the user shall include The following or similar statement, placed in a prominent location in the text of the manual: Note : This equipment has been tested and found to comply with the limits for a Class A Digital device. Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in a commercial environment. This equipment generates. Uses, and can radiate radio frequency energy and, if not installed and used …

Text truncated - open the document above for the full version.

Lee Technology Korea Co., Ltd. 3F, Bucheon vehicle department, 499-2, Sang 3-dong, Wonmi-gu, Bucheon-si, Gyeonggi-do, Korea Date: 2011.12.20 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize KT Kang of KES Co., Ltd. and hereafter referred to as KES Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by KT Kang of KES Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing KES Co., Ltd. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; Lee Technology Korea Co., Ltd. 3F, Bucheon vehicle department, 499-2, Sang 3-dong, Wonmi-gu, Bucheon-si, Gyeonggi-do, Korea h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jongchul Lee / President Lee Technology Korea Co., Ltd. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Lee Technology Korea Co., Ltd. 3F, Bucheon vehicle department, 499-2, Sang 3-dong, Wonmi-gu, Bucheon-si, Gyeonggi-do, Korea Date: 2011.12.20 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: QBTLTK-2008TE Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Part List CONF APPENDIX_LTK-2008TE_Part List.PDF Schematics Diagram(s) CONF APPENDIX_ LTK-2008TE_Schemetics.PDF Block diagram CONF APPENDIX_ LTK-2008TE_Block diagram.PDF Operation description CONF APPENDIX_ LTK-2008TE_Operation description.PDF The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Jongchul Lee / President Lee Technology Korea Co., Ltd.

www.kes.co.kr Model No.: LTK-2008TE Page 1 of 1 EUT External photographs

www.kes.co.kr Model No.: LTK-2008TE Page 1 of 1 Label and Location Lee Technology Korea Co., Ltd. FCC ID: QBTLTK-2008TE Model: LTK-2008TE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

www.kes.co.kr Model No.: LTK-2008TE Page 1 of 2 EUT Internal photographs Antenna www.kes.co.kr Model No.: LTK-2008TE Page 2 of 2

The procedure in this chapter allows the verification of the electrical performance of transmitter. These tests do not require access to the interior of the instrument. PERFORMANCE TEST LTK-2008TE_TRANSMITTER TUNE UP PROCEDURE Recommended test equipment HP-436A/8481D HP-8591E HP-8902A TEK TDS360 + / - 0.2dB, - 60 to -20dBm. 100 KHz to 1GHz 100KHz to 12GHz, up to -120 dBm 0.2 to 1300MHz, 0 to -125dBm, Freq Counter DC to 100MHz, 5mV to 1V/div, Rise Time capavility Power meter Spectrum analyzer Measuring receiver Oscilloscope DescriptionMinimum specificationModel 1. Frequency Accuracy HP-53181A Tescom 9991010W, 20dB Att, DC to 1GHz TEK TDS360DC to 100MHz, 5mV to 1V/div, Rise Time capavilityOscilloscope Frequency Counter Attenuator + / - 0.1ppm, 10Hz ~ 1GHz, 9digit Frequency : 433.92MHz Stavility : Same as reference oscillator accuracy. Internal 1ppm 0 to 50degC 1.Test Setup (Connect LTK-2008TE RF Line without case) HP-8902A DC block HP-8902A 2. HP-8902A : auto tuning, frequency display 3. LTK-2008TE TRANSMITTER 1) Push button 2) check frequency accuracy Carrier frequency accuracy test 2. RF Output Level Accuracy RF level : 10dBm 미만 Accuracy : +/-1dB 1.Test Setup HP-8902A (Connect LTK-2008TE RF Line without case) 2.HP-8902A : Auto-tuning, RF Power 3.LTK-2008TE TRANSMITTER 3.LTK-2008TE TRANSMITTER 1) Connect DC block 2) Push button and check RF Level 3. Harmonic Spurious Harmonic Level at 2xFOUT : <-40dBc 1. Test Setup. RF OUT HP-8591E input 50 DC block HP-8591E (Connect LTK-2008TE RF Line without case) 2. HP 8591E : Span = 500KHz, RBW = 10KHz, VBW = 30KHz. 3. LTK-2008TE TRANSMITTER: 1) Connect DC block Harmonice test 3) Push button and check harmonic Level(dBm)Fout-2*Fout Limit 40dbc 4. Modulation Fout(MHz) 433.92MHz Spurious(MHz) 867.84Mhz Remark LTK-2008TE TRANSMITTER Harmonic Spurious 4. Modulation 4.1. FM(RECT) (Internal FSK Test Patterns) 1.Test Setup OSCILLOSCOPE Audio input DC block FSK Deviation and Noise Test (Connect LTK-2008TE RF Line without case) 2.Equipment HP-8902A : FM TDS360 : 250us/div, 500mV/div Average : 16 3.LTK-2008TE TRANSMITTER: 1) Connect DC block 2) Push button and check modulation

KES Co., Ltd. C3701
Dongil
Techno
Town,
8891,
Gwanyang
2dong,

Dongangu,
Anyangsi,
Gyeonggido,
431716,
Korea
Tel:
+82314256200
/
Fax:
+82314240450
www.kes.co.kr

Test
report
No.:KESRF110060
Page:
(24)
of
(26)
This
report
shall
not
be
reproduced
except
in
full,
without
the
written
approval
of
KES
Co.,
Ltd.

The
test
results
in
the
report
only
apply
to
the
tested
sample.

KESP510109
Rev.1
KES
A4
2.1.8 RF exposure
According
to
FCC
part
1.1310
:
The
criteria
listed
in
the
following
table
shall
be
used
to
evaluate
the
environment
impact
of
human
exposure
to
radio
frequency
(RF)
radiation
as
specified
in
§
1.1307(b)

Limits
for
Maximum
Permissible
Exposure
(MPE)


Friis
transmission
formula:
Pd
=
(Pout
×
G)
/
(4
×
pi
×
R 2 )
Where,
Pd
=
power
density
in
㎽/㎠
Pout
=
output
power
to
antenna
in
㎽
G
=
gain
of
antenna
in
linear
scale
Pi
=
3.1416
R
=
distance
between
observation
point
and
center
of
the
radiator
in
cm
Pd
the
limit
of
MPE,
f/300
㎽/㎠.
If
we
know
the
maximum
gain
of
the
antenna
and
the
total
power
input
to
the
antenna,
through
the
calculation,
we
will
know
the
distance
where
the
MPE
limit
is
reached.

Results
Frequency (㎒) Peak output power (㏈m) Antenna gain (㏈i) Power density at 20 ㎝(㎽/㎠) Limit (㎽/㎠) 457.575
10.49
2.15

0.001
36
1.53


Frequency range (㎒) Electric field strength(V/m) Magnetic field strength (A/m) Power density (㎽/㎠) Average time (A)
Limits
for
Occupational
/Control
Exposures
300
~
1
500


F/300
6
1
500
~
100
000


5
6
(B)
Limits
for
General
Population/Uncontrol
Exposures
300
~
1
500


F/1
500
6
1
500
~
100
000


1
30