QCI-SKIWB800D3BT/BLE/WiFi 6 radio module

BT/BLE/WiFi 6 radio module SKI.WB800D.3 User Manual Confidential and Proprietary – AICSEMI INC. Page 1 of 5 SKI.WB800D.3 Wi-Fi6/BT5.0 Rev0.1 1. General Description SKI.WB800D.3 is a highly integrated SoC with dual band Wi-Fi6, BT5.0 and high- performance Cortex-M4F 480MHz for wireless application. SKI.WB800D.3 uses a compact 5×5mm² QFN48 package. 2. Electrical Characteristics Table 3-1 DC Electrical Specification (Recommended Operation Conditions): SYMBOL DESCRIPTION MIN TYP MAX UNIT VBAT Supply Voltage from battery or LDO 3.0 3.8 5 V T amb Ambient Temperature -20 27 +80 °C V IL CMOS Low Level Input Voltage 0 0.3*VIO V V IH CMOS High Level Input Voltage 0.7*VIO VIO V V TH CMOS Threshold Voltage 0.5*VIO V Table 3-2 Output Power (e.i.r.p) Type Frequency MIN TYP MAX UNIT BT 2402- 2480MHz 4.05 6.05 8.05 dBm BLE 2402-2480MHz 3.67 5.67 7.67 dBm 2.4G 2412-2472MHz 17.45 19.45 21.45 dBm 5150-5250MHz B1 ：18.68 B1 ：20.68 B1 ：22.68 5G 5250-5350MHz 5470-5600MHz B2 ：18.93 B2 ：20.93 B2 ：22.93 dBm 5650-5725MHz B3 ：18.46 B3 ：20.46 B3 ：22.46 5.8G 11.74 13.74 15.74 dBm 5725-5850MHz Confidential and Proprietary – AICSEMI INC. Page 2 of 5 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The final end product must be labelled in a visible area with the following: “Contains FCC ID: QCI-SKIWB800D3” . “Contains IC: 4302A-SKIWB800D3” . When the module is loaded into the host for use, the OEM has the responsibility to further evaluate and test to ensure that the host and module are compliant Confidential and Proprietary – AICSEMI INC. Page 3 of 5 Canada Statement This device contains licence- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: ( 1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’é metteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’ Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’ appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS- 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS- 102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en mê me temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps. 1. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 2. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit; 3. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MH…

Text truncated - open the document above for the full version.

SMART Technologies ULC 3636 Research Road NW Calgary, AB T2L 1Y1 CANADA Phone 403.245.0333 Fax 403.228.2500 [email protected] www.smarttech.com Kiwa Nederland B.V. 2023-08-11 Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands RE: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company name: SMART Technologies (Seattle) Inc. FRN: 0033599457 Contact person name: Sean H MacKellar Street address: 2401 4th Ave, 3rd Floor Seattle, WA 98121 United States ZIP/City/State WA 98121 Telephone number: (360) 201-8932 Email address: [email protected] Signature: Date: 2023-08-08 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: SMART Technologies Inc. Grantee Code: QCI FRN: 0006983860 Contact person name: Nicole McMillan Street address: 3636 Research Road NW Calgary T2L 1Y1 Canada ZIP/City/State Calgary Telephone number: 4034074177 Email address: [email protected] Signature: Date: 2023-08-08

SMART Technologies ULC 3636 Research Road NW Calgary, AB T2L 1Y1 CANADA Phone 403.245.0333 Fax 403.228.2500 [email protected] www.smarttech.com Federal Communications Commission 2023-08-11 Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 RE: CERTIFICATIONS CONCERNING “COVERED” EQUIPMENT FCC ID: QCI-SKIWB800D3 To Whom It May Concern: As required by section 2.911(d)(5)(i), SMART Technologies Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(ii), SMART Technologies Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you for your attention to this matter. Sincerely, Nicole McMillan / Manager, System Design, Regulatory and Compliance SMART Technologies Inc.

SMART Technologies ULC 3636 Research Road NW Calgary, AB T2L 1Y1 CANADA Phone 403.245.0333 Fax 403.228.2500 [email protected] www.smarttech.com 2023-04-13 Subject: Agent Authorization Letter To Whom It May Concern: We, the undersigned, hereby authorize Sean MacKellar to act on our behalf, as our agent, in the following matters related to the FCC and/or Industry Canada approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Sean MacKellar within the scope of this authorization shall have the same affect as our own. This authorization shall expire 12 months from original date. Sincerely, Nicole McMillan Manager, System Design, Regulatory and Compliance SMART Technologies Inc.

SMART Technologies ULC 3636 Research Road NW Calgary, AB T2L 1Y1 CANADA Phone 403.245.0333 Fax 403.228.2500 [email protected] www.smarttech.com 2023-08-08 Declaration of Authorization We, Name: SMART Technologies Inc. Address: 3636 Research Road NW City: Calgary T2L 1Y1 Country: Canada Declare that: Name of Representative: Ms. Rose Liu (1) Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country China is authorized to apply for Certification of the following product(s): Product description: BT/BLE/WiFi 6 radio module Type designation: SKI.WB800D.3 Trademark: SMART Validity / Expiry date: 2024-08-03 on our behalf. Sincerely, Sean MacKellar / Sr. Regulatory Specialist SMART Technologies Inc.

SMART Technologies ULC 3636 Research Road NW Calgary, AB T2L 1Y1 CANADA Phone 403.245.0333 Fax 403.228.2500 [email protected] www.smarttech.com Kiwa Netherlands B.V., Dept. FCC TCB 2023-08-09 Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for Confidentiality, FCC ID: QCI-SKIWB800D3 To Whom It May Concern: Pursuant to 47 CFR Section 0.459(a) & (b), SMART Technologies Inc. hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: • Block Diagrams • Schematic Diagrams • Operational Description The materials listed above contain trade secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). The disclosure or publication of any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Sincerely, Sean MacKellar / Sr. Regulatory Specialist SMART Technologies Inc.

RF_734_05 FCC Modular Approval Request Page 1 of 3 28-12-2022 Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: QCI-SKIWB800D3 Items to be covered by Single modular transmitters. Answer from applicant 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. YES, Please refer to External Photos. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. YES, U2 AIC8800D is used for the function. 3. The module must contain power supply regulation on the module YES, the modular has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). YES, it is Dipole antenna. 5. The module must demonstrate compliance in a stand-alone configuration. YES, the module is tested in a stand-alone configuration as the test photos show. 6. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). YES, please refer to the exhibition label sample for this module. . 7. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. YES, please refer to the user manual. 8. The module must comply with RF exposure requirements. YES, RF exposure statement is attached in the user manual. RF_734_05 FCC Modular Approval Request Page 2 of 3 28-12-2022 Items to be covered by Split modular transmitters. Answer from applicant 1. The modular transmitter must comply with all requirements of a single modular transmitter except for items (1) & (5) of the above single modular approval requirements. N/A 2. Only the radio front end must be shielded. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The interface between the split sections of the modular system must be digital with a minimum signalling amplitude of 150 mV peak-to-peak. N/A 3. Control information and other data may be exchanged between the transmitter control elements and radio front end. N/A 4. The sections of a split modular transmitter must be tested installed in a host device(s) similar to that which is representative of the platform(s) intended for use. N/A 5. Manufacturers must ensure that only transmitter control elements and radio front end components that have been approved together are capable of operating together. The transmitter module must not operate unless it has verified that the installed transmitter control elements and radio front end have been authorized together. Manufacturers may use means including, but not limited to, coding in hardware and electronic signatures in software to meet these requirements, and must describe the methods in their application for equipment authorization. N/A Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): Sean MacKellar Date: 2023-08-08 Signature:

Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) PHOTOS OF EUT - External Reference No.: A23070303 FCC ID : QCI-SKIWB800D3 Page: 1 of 1 Date: Aug. 02, 2023 SKI.WB800D3

Product Name:BT/BLE/ WiFi 6 radio module ModelSKI.WB800D.3 Brand:SMART Manufacuter:SMART TECHNOLOGIES ULC Address: 3636 RESEARCH ROAD NW CALGARY, AB T2L 1Y1 CANADA FCC ID:QCI-SKIWB800D3 IC:4302A-SKIWB800D3

Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) PHOTOS OF EUT - Internal Reference No.: A23070303 FCC ID : QCI-SKIWB800D3 Page: 1 of 3 Date: Aug. 02, 2023 Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) PHOTOS OF EUT - Internal Reference No.: A23070303 FCC ID : QCI-SKIWB800D3 Page: 2 of 3 Date: Aug. 02, 2023 AIC8800D RF IC 5G Front-end IC Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) PHOTOS OF EUT - Internal Reference No.: A23070303 FCC ID : QCI-SKIWB800D3 Page: 3 of 3 Date: Aug. 02, 2023 26 MHz IC XTAL

Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) TEST REPORT Reference No.: A23070303 Report No.: FCCA23070303-M0 FCC ID: QCI-SKIWB800D3 Page: 2 of 8 Date: Aug. 02, 2023 Revisions History Report No. Issue Date Revisions FCCA23070303-M0 Aug. 02, 2023 Initial issue. Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) TEST REPORT Reference No.: A23070303 Report No.: FCCA23070303-M0 FCC ID: QCI-SKIWB800D3 Page: 3 of 8 Date: Aug. 02, 2023 1. DOCUMENT POLICY AND TEST STATEMENT 1.1 DOCUMENT POLICY - The report shall not be reproduced except in full, without the written approval of SRT Lab, Inc. - FCC Registered Test Site Number: TW1016 1.2 TEST STATEMENT - This random test report is for FCC's market spot check action by FCC ID: QCI- SKIWB800D3 project, applied only to the specific samples tested under conditions. - The test results in the report apply only to the unit tested by SRT Lab. - There was no deviation from the requirements of test standards during the test. - DC power source from DC adapter: 15V ⎓ 3A 1.3 EUT MODIFICATION - No modification in SRT Lab. 1.4 DECISION RULE - To make sure the testing report(s) meet the requirement of ISO/IEC 17025:2017 standard and meet chapter 7.1 (Review of Requests, Tenders and Contracts), chapter 7.4 (Handling of Test or Calibration Items), chapter 7.8.2 (Reporting of Results – Common Requirement for Reports (Test, Calibration or Sampling)), This decision rule will be the base of adjustment (include the disclaimer scope) from SRT LAB. - After communicate between SRT LAB. and clients /applicants and get the agreement, SRT LAB. will do the adjustment. According to this decision rule, SRT LAB. Manager(s) will do the Pass or Fail adjustment. (But one thing need to be concerned is, not every assessing rule suits all declaration of conformity assessing actions, it should be ruled depends on product’s feature, test standard, technical regulation, test results, and also acceptance of risk of both sides.) - This report according to the “description of applied standards and statements of conformity” on the report, as the decision rule. 1.5 REPORTING STATEMENTS OF CONFORMITY Base on ISO/IEC 17025, the statements of conformity requirement of testing results. □ It does not need to provide the statements of conformity. ▉ It need to provide the statements of conformity and ▉ Use CISPR 16-4,ISO/IEC Guide 98-3, IEC Guide 115,etsi ETR 028 Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) TEST REPORT Reference No.: A23070303 Report No.: FCCA23070303-M0 FCC ID: QCI-SKIWB800D3 Page: 4 of 8 Date: Aug. 02, 2023 speciation and it does not need to provide additional uncertainty of the testing results or data on the report(s). □ It need to provide additional uncertainty of the testing results or data on the report(s). Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) TEST REPORT Reference No.: A23070303 Report No.: FCCA23070303-M0 FCC ID: QCI-SKIWB800D3 Page: 5 of 8 Date: Aug. 02, 2023 2. GENERAL CONCULUSION According to FCC §§1.1307 and KDB 447498 D04, the available maximum time- averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW). 1) Option A. 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. 2) Option B. SAR-Based Exemption A more comprehensive exemption, considering a variable power threshold that depends on both the separation distance and power, is provided in § 1.1307(b)(3)(i)(B). This exemption is applicable to the frequency range between 300 MHz and 6 GHz, with test separation distances between 0.5 cm and 40 cm, and for all RF sources in fixed, mobile, and portable device exposure conditions. Accordingly, a RF source is considered an RF exempt device if its available maximum time-averaged (matched conducted) power or its effective radiated power (ERP), whichever is greater, are below a specified threshold. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Where and Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) TEST REPORT Reference No.: A23070303 Report No.: FCCA23070303-M0 FCC ID: QCI-SKIWB800D3 Page: 6 of 8 Date: Aug. 02, 2023 Table B2-Example Power Thresholds (mW) Distance(mm) mW 5 10 15 20 25 30 35 40 45 50 300 39 65 88 110 129148 166184 201 217 450 22 44 67 89 112135 158180 203 226 835 9 25 44 66 90 116 145175 207 240 1900 3 12 26 44 66 92 122157 195 236 2450 3 10 22 38 59 83 111143 179 219 3600 2 8 18 32 49 71 96 125 158 195 Frequency (MHz) 5800 1 6 14 25 40 58 80 106 136 169 3) Option C MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the product of the maximum antenna gain and the delivered maximum time-…

Text truncated - open the document above for the full version.

Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) TEST REPORT Reference No.: A23070303 Report No.: FCCA23070303-B0 FCC ID : QCI-SKIWB800D3 Page: 2 of 55 Date: Aug. 02, 2023 Revisions History Report No. Issue Date Revisions DGTA23070303-B0 Aug. 02, 2023 Initial issue. Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) TEST REPORT Reference No.: A23070303 Report No.: FCCA23070303-B0 FCC ID : QCI-SKIWB800D3 Page: 3 of 55 Date: Aug. 02, 2023 Table of Contents 1. DOCUMENT POLICY AND TEST STATEMENT ................................................. 5 1.1 DOCUMENT POLICY......................................................................................... 5 1.2 TEST STATEMENT............................................................................................ 5 1.3 EUT MODIFICATION ......................................................................................... 5 1.4 DECISION RULE................................................................................................ 5 1.5 REPORTING STATEMENTS OF CONFORMITY .............................................. 5 2. DESCRIPTION OF EUT AND TEST MODE ........................................................ 6 2.1 GENERAL DESCRIPTION OF EUT................................................................... 6 2.2 DESCRIPTION OF EUT INTERNAL DEVICE.................................................... 6 2.3 DESCRIPTION OF TEST MODE ....................................................................... 7 2.4 EUT OPERATING CONDITION ......................................................................... 8 2.5 DESCRIPTION OF SUPPORT UNIT.................................................................. 8 2.6 CHANNEL AND FREQUENCY TABLE ............................................................. 9 3. DESCRIPTION OF APPLIED STANDARDS ..................................................... 10 3.1 SUMMARY OF TEST RESULTS ..................................................................... 10 4. CONDUCTED EMISSION TEST ........................................................................ 11 4.1 LIMIT ................................................................................................................ 11 4.2 TEST EQUIPMENT .......................................................................................... 11 4.3 TEST SETUP.................................................................................................... 12 4.4 TEST PROCEDURE......................................................................................... 12 4.5 TEST RESULT ................................................................................................. 13 5. RADIATED EMISSION TEST............................................................................. 15 5.1 LIMIT ................................................................................................................ 15 5.2 TEST EQUIPMENT .......................................................................................... 16 5.3 TEST SET-UP .................................................................................................. 18 5.4 TEST PROCEDURE......................................................................................... 19 5.5 TEST RESULT ................................................................................................. 20 6. 20DB BANDWIDTH ........................................................................................... 32 6.1 LIMIT ................................................................................................................ 32 6.2 TEST EQUIPMENT .......................................................................................... 32 6.3 TEST SET-UP .................................................................................................. 32 6.4 TEST PROCEDURE......................................................................................... 32 6.5 EUT OPERATING CONDITION ....................................................................... 32 6.6 TEST RESULT ................................................................................................. 33 7. PEAK CONDUCTED OUTPUT POWER TEST.................................................. 35 7.1 LIMIT ................................................................................................................ 35 7.2 TEST EQUIPMENT .......................................................................................... 35 7.3 TEST SET-UP .................................................................................................. 35 7.4 TEST PROCEDURE......................................................................................... 35 7.5 EUT OPERATING CONDITION ....................................................................... 35 7.6 TEST RESULT ................................................................................................. 36 8. BAND EDGE TEST ............................................................................................ 38 8.1 LIMIT ................................................................................................................ 38 8.2 TEST EQUIPMENT .......................................................................................... 38 8.3 TEST SET-UP .................................................................................................. 39 Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) TEST REPORT Reference No.: A23070303 Report No.: FCCA23070303-B0 FCC ID : QCI-SKIWB800D3 Page: 4 of 55 Date: Aug. 02, 2023 8.4 TEST PROCEDURE......................................................................................... 39 8.5 EUT OPERATING CONDITION ............…

Text truncated - open the document above for the full version.

Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) PHOTOS OF TESTING Reference No.: A23070303 FCC ID : QCI-SKIWB800D3 Page: 1 of 4 Date: Aug. 02, 2023 - Conducted test: TX, Link mode Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) PHOTOS OF TESTING Reference No.: A23070303 FCC ID : QCI-SKIWB800D3 Page: 2 of 4 Date: Aug. 02, 2023 - Radiated test (below 1 GHz): TX, Link mode Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) PHOTOS OF TESTING Reference No.: A23070303 FCC ID : QCI-SKIWB800D3 Page: 3 of 4 Date: Aug. 02, 2023 - Radiated test (above 1 GHz): TX, Link mode Spectrum Research & Testing Lab., Inc. No.167,Ln. 780, Shan-Tong Rd.,Ling 8, Shan-Tong Li, Chung-Li Dist., Taoyuan City 320, Taiwan (R.O.C.) PHOTOS OF TESTING Reference No.: A23070303 FCC ID : QCI-SKIWB800D3 Page: 4 of 4 Date: Aug. 02, 2023 - DFS test (above 1 GHz): TX, Link mode