QE847XXXR/C VEHICLE

POLARIS LICENSED MERCHANDISE Logo in black and ITC Logo in color here Any Visuals and graphics here... Must have ROAD-RAGE LOGO here Please emphasize the word visually AT V --------- CAUTION: ELECTRICALLY OPERATED PRODUCT: NOT RECOMMENDED FOR AGES UNDER 8 YEARS OF AGE. AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO PREVENT ELECTRIC SHOCK. INPUT: AC 120V 60Hz 10W OUTPUT: DC 9V 300mA -- Road-Rage is a registered trademark of Interactive Toy Concepts Inc. www.interactivetoy.com Age Rating : 8+ (in a graphical format) Instruction Manual Congratulations on the purchase of your RC Sportsman 800 All Terrain Vehicle (ATV) manufactured by Interactive Toy Concepts Inc under license with POLARIS INDUSTRIES . This Polaris Sportsman 800 runs on grass, dirt, snow, gravel, sand, pavement and carpet. It’s a durable go anywhere ATV just like the real thing! It also has a switchable gearbox offering high torque or high speed. It features realistic rubber tires, offroad tracks and working lights and driving figure. It’s ready to run out of the box, includes one 7.2V battery and charger. This package requires one 9V battery (not included) for the transmitter. <We need a picture here showing everything in the box and notations to describe what is what Unpacking and contents To prevent damage during shipping, the ATV is securely fastened in the package. Please ensure that all the tie down and fastening locations are unfastened before attempting to remove the snowmobile. The Sportsman ATV --Æ Radio Transmitter and Antenna -Æ Battery and Charger -Æ Windshield -Æ Tracks -Æ Cargo Box -Æ Instruction Manuals Æ Wheel Wrench -Æ Operating Instruction Battery Pack Care and Cautions: Use only a fresh battery and battery pack of the required size and type. If you do not plan to use the vehicle for several days, remove the battery from the transmitter and the battery pack from the vehicle. Do not mix old and new batteries. Do not mix the different type of batteries - alkaline, standard (carbon zinc), or rechargeable (Nickel Cadium) or Ni-Mh (Nickel Metal Hydride) Never leave dead or weak batteries in the vehicle Dispose of old batteries promptly and properly; do not bury or burn them. Do not charge non-rechargeable batteries Insert batteries with the correct polarity Do not short the supply terminals Remove rechargeable batteries from the toy before being charged Keep the package and this instruction manual since it contains important information Never allow the battery pack to become hot during charging - this will cause permanent damage. Warm is okay - hot is not! -Never leave a battery unattended while it is being charged. -Never recharge a hot battery. Always allow it to cool before recharge. -If the battery is not completely discharged before recharging, the charging time may be reduced. Again, do not allow the battery to get hot! -The AC adapter should be examined periodically to ensure that it is undamaged. Failure to do this may result in the risk of fire, electric shock, or injury to people. In the event that the adapter shows signs of abuse, it should not be used until repaired by a certified technician. -Install or replace the batteries by adult only. - Do not overcharge the battery pack by letting it charge for too long. -Rechargeable batteries are to be charged only under adult supervision. Battery Installation for the Transmitter: The transmitter comes with a telescopic antenna, please insert the antenna to the top portion of the transmitter. The Transmitter requires one 9-Volt battery (available separately). For the best performance and longest life, we recommend an alkaline battery. Follow these steps to install the battery in the transmitter. 1. Remove battery compartment cover by sliding it in the direction of the arrow shown on the compartment cover. 2. Place the battery in the compartment according to the polarity symbols (+ and -) marked inside. 3. Replace the cover and snap it shut. When the transmitter range decreases, replace battery Battery for SPORTSMAN 800 ATV Your SPORTSMAN 800 ATV requires a 7.2 volt rechargeable batter pack (included). You must charge the battery pack with a battery charger before you can use it to power your SPORTSMAN 800 ATV. To charge it, connect the charger and battery first, then connect the charger to the nearest wall socket giving AC 110-120V. The first charge cycle of this battery should be at least 4 hours. Once it is charged, the battery should feel luke warm. Then follow these steps to put the battery pack in the SPORTSMAN 800 ATV. Battery Charger Instructions: CHARGER MUST BE OPERATED BY ADULTS ONLY. Note: To remove, grasp the battery pack’s and the vehicle’s connectors, press and hold down the latch on the vehicle’s power connector, then pull the power connectors apart to disconnect them. Plug charger into a standard household outlet (110/120Volt) Join together the plug from the battery to the receptacle plug attached to the charger wires. Be sure to get a firm fit by having the ridge snap into place with the clip. Allow the battery to charge for 4 hours for a complete and full charge. Additional charging will not improve your battery’s output,and could eventually damage the battery. Do not charge a battery if you notice it leaking or see corrosion n any party of the battery. A characteristic of Ni-Cd batteries is a loss of power quickly. A spare battery is therefore recommended for longer play, and happier operators. If the battery is hot after operation please wait until it is cool before recharging. Attempting to recharge a battery in this condition can reduce the life of the battery and may cause damage later. The rechargeable battery must be charged with the provided battery charger. The battery charger is not a toy. Dispose of old batteries properly. The battery charger is to be regularly examined for damage to the cord, plug enclosure and other parts, in the event of such damage. the rechargeable batteries must not…

Text truncated - open the document above for the full version.

TRANSMITTER FO R Polari s Sportsman 800 RC ATV (27.195MHz) Contro l ke ys SWID-A -B Encode r IC U1 TX2 Oscillat or 27.19 5MHZ Q1,Q2,Q 3, X1 Modulat or Q4,Q 5,

EUT - Front View EUT - Back View

FCC ID Label Sample for Model: 47XXX FCC ID: QE847XXX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC ID Label This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT EUT Bottom View/proposed FCC Mark Location FCC ID: QE847XXX This device complies with Part 15 of the FCC

PCB- Front View PCB- Back View

General Circuit Description 1.0 Product Description (Receiver) The Equipment Under Test (EUT) is a Super-regenerative Receiver for a remote controlled Toy operating at 49.860 MHz. The EUT is powered by 12V Ni-Cd rechargeable batteries. The EUT can be controlled in for moving directions (forward/backward and left/right turn). The brief circuit description is listed as follows: -Q3 and associated circuit act as a RF amplifier. -Q8,9,10,11,12,13and associated circuit act as a steering motor driver. -K1,2 and associated circuit act as a racing motor driver. -IC1 and associated circuit act as decode IC. -D5, Q6 and associated circuit act as power Reguiator circuit to supply the 2.7V power for pre-amp circuit and decode IC. 1.0 Product Description (Transmitter) The Equipment Under Test (EUT) is a transmitter for a remote controlled Toy operating at 27.195MHZ, which is controlled by a crystal. The EUT is powered by 9V battery. There are four switches: Forward and Backward, turn left and right. The brief circuit description is listed as follows: -Q, Q2,Q3,X1 and associated circuit act as oscillator. -Q4,Q5 and associated circuit act as modulator. -U1 and associated circuit act as encoder IC.

1 2 3 4 5 6 A B CD 6 5 4 3 2 1 D C B A C I N O R T C E L E I E K T A T D T L , . O C . D N I . o N . G W D . v e R : e t a D e z i S t r a P : . o N : e m a N l e d o M : d e v o r p p A : d e k c e h C : n w a r D : e l t i T ) z H M 5 9 1 . 7 2 ( R E T T I M S N A R T 0 / A C : E G A P : o N . C O D F O V T A C R 2 A - 1 0 0 C T I - B E 5 1 - 6 - 7 0 0 2 3 Q 4 1 0 9 3 3 R K 7 4 4 1 - 1 U 1 E A N N E T N A 1 2 1 X Z H M 5 9 1 7 . 2 1 T H u 5 . 1 3 L H u 2 . 2 2 3 R K 2 2 9 C P 0 8 1 1 1 C P 5 2 8 C P 0 0 1 0 1 C P 5 2 1 L H U 2 . 2 7 2 R K 7 4 0 3 R R 0 8 1 4 Q 4 1 0 9 2 L H U 1 5 C P 3 3 0 2 R R 0 0 1 3 1 C P 3 3 1 3 R K 7 4 2 Q 4 1 0 9 4 L H u 2 . 2 2 1 C P 2 2 4 3 R R 0 0 1 4 1 C P 0 0 1 9 1 C P 7 4 4 C 4 0 1 9 2 R 7 K 4 0 2 C 3 0 1 8 2 R K 0 1 1 Q 4 1 0 9 4 D 0 1 9 B B O S 1 T B V 9 1 S T S P S - W S 1 D 0 1 R 0 1 C F U 1 . 0 2 C F U 1 . 0 3 1 R R 0 3 3 1 D E L D E L 3 R K 1 2 2 C F u 0 1 5 1 C F U 1 . 0 1 Z V 9 . 3 1 2 3 4 5 6 78 9 10 11 12 13 14 1 U 4 1 - C I 2 1 R R 0 SO 1 3 4 2 A 2 W S T 3 P 2 - W S 1 3 4 2 A 1 W S T 3 P 2 - W S 4 R K 1 7 1 C 2 0 1 5 R K 3 . 3 8 1 C 2 0 1 7 R K 0 1 8 R K 0 1 0 1 R K 7 4 1 1 R K 7 4 4 1 R R 0 0 1 2 C C V 1 C C V 2 C C V 8 D 8 4 1 4 N 1 2 D 8 4 1 4 N 1 9 D 8 4 1 4 N 1 3 D 8 4 1 4 N 1 0 1 D 8 4 1 4 N 1 4 D 8 4 1 4 N 1 1 1 D 8 4 1 4 N 1 5 D 8 4 1 4 N 1 2 1 D 8 4 1 4 N 1 6 D 8 4 1 4 N 1 3 1 D 8 4 1 4 N 1 7 D 8 4 1 4 N 1 2 W S R 1 W S L + C I V + C I V + C I V 6 1 C F U 1 . 0 4 1 - 1 U B / F - 2 U R / L - 3 U 1 R / L - 3 U 1 B / F - 2 U 2 R / L - 3 U 2 B / F - 2 U 3 R / L - 3 U 3 B / F - 2 U 4 R / L - 3 U 4 B / F - 2 U 5 R / L - 3 U 5 B / F - 2 U 6 R / L - 3 U 6 B / F - 2 U A - D I W S Y A W 6 - W S R / L - 3 U 1 R / L - 3 U 2 R / L - 3 U 3 R / L - 3 U 4 R / L - 3 U 5 R / L - 3 U 6 R / L - 3 U B - D I W S Y A W 6 - W S B / F - 3 U 1 B / F - 3 U 2 B / F - 3 U 3 B / F - 3 U 4 B / F - 3 U 5 B / F - 3 U 6 B / F - 3 U

FCC TEST REPORT Page 1 of 23 FCC ID : QE847XXX Applicant : Interactive Toy Concepts(HK) Ltd. 7/F.,Eu Yan San Tower, 11-15 Chatham Road South, TST, Kowloon, Hong Kong Equipment Under Test (EUT) : Product description : R/C Vehicle Model No. : 47XXX Standards : FCC 15 Subpart C Paragraph 15.227 Date of Test : July 9, 2007 Test Engineer : Tiger Su Reviewed By : PERPARED BY: Waltek Services (Shenzhen) Co., Ltd. 8C,West Tower, Aidi Building, No.5003 Binhe Rd, Futian District, Shenzhen518045, Guangdong, China. Tel: 86-755-83551033 Fax: 86-755-83552400 Interactive Toy Concepts(HK) Ltd. FCC ID: QE847XXX Page 2 of 23 2 Contents Page 1 COVER PAGE..........................................................................................................................................................1 2 CONTENTS ..............................................................................................................................................................2 3 TEST SUMMARY....................................................................................................................................................5 4 GENERAL INFORMATION..................................................................................................................................6 4.1 CLIENT INFORMATION............................................................................................................................................6 4.2 GENERAL DESCRIPTION OF E.U.T...........................................................................................................................6 4.3 DETAILS OF E.U.T. .................................................................................................................................................6 4.4 DESCRIPTION OF SUPPORT UNITS...........................................................................................................................6 4.5 STANDARDS APPLICABLE FOR TESTING..................................................................................................................6 4.6 TEST FACILITY........................................................................................................................................................7 4.7 TEST LOCATION......................................................................................................................................................7 5 EQUIPMENT USED DURING TEST ...................................................................................................................8 6 CONDUCTED EMISSION TEST ........................................................................................................................10 6.1 TEST EQUIPMENT..................................................................................................................................................10 6.2 TEST PROCEDURE.................................................................................................................................................10 6.3 CONDUCTED TEST SETUP.....................................................................................................................................11 6.4 EUT OPERATING CONDITION...............................................................................................................................11 6.5 CONDUCTED EMISSION LIMITS.............................................................................................................................12 6.6 CONDUCTED EMISSION TEST RESULT...................................................................................................................12 7 RADIATION EMISSION TEST...........................................................................................................................13 7.1 TEST EQUIPMENT..................................................................................................................................................13 7.2 MEASUREMENT UNCERTAINTY.............................................................................................................................13 7.3 TEST PROCEDURE.................................................................................................................................................13 7.4 RADIATED TEST SETUP.........................................................................................................................................14 7.5 SPECTRUM ANALYZER SETUP...............................................................................................................................15 7.6 CORRECTED AMPLITUDE & MARGIN CALCULATION............................................................................................15 7.7 SUMMARY OF TEST RESULTS................................................................................................................................15 7.8 EUT OPERATING CONDITION...............................................................................................................................16 7.9 RADIATED EMISSIONS LIMIT.................................................................................................................................16 7.10 RADIATED EMISSIONS TEST RESULT................................................................................................................17 7.11 RADIATED EMISSION TEST DATA.....................................................................................................................17 8 OCCUPIED BANDWIDTH ..................................................................................................................................18 8.1 TEST PROCEDURE.................................................................................................................................................18 9 PHOTOGRAPHS OF TESTING.....................................................................................................…

Text truncated - open the document above for the full version.

Radiation Emission Test View