QHYRPM-A5A11-B14OneCell Radio Point

D R AF T Hardware Installation, RP5000 series Release 4.0 Document Number: M0300A2 OneCell ® Document Revision: 4.0.11 Date: January 2020 iiM0300A2 4.0.11 January 2020 D R A F T Copyright 2020 CommScope, All rights reserved. THIS DOCUMENT HAS BEEN DEVELOPED BY COMMSCOPE, AND IS INTENDED FOR THE USE OF ITS CUSTOMERS AND CUSTOMER SUPPORT PERSONNEL. THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR COMMSCOPE SALES REPRESENTATIVE FOR A COPY. OneCell ® Installation, RP5000 series, Release 4.0 iii D R A F T Contents Document revision history About this document Audience ....................................................................................................................xiii Purpose.......................................................................................................................xiii What you need to know .............................................................................................xiii Customer documentation ...........................................................................................xiii Conventions ................................................................................................................ xv Notes, cautions, and warnings ................................................................................... xvi PART 1 OVERVIEW AND PREPARATION Chapter 1 CommScope OneCell® overview Overview....................................................................................................................1-2 CommScope OneCell system ....................................................................................1-2 OneCell hardware components ..................................................................................1-3 Baseband Controller physical ports.....................................................................1-3 Chapter 2 Preparing to install the OneCell system Overview....................................................................................................................2-2 Before installing the OneCell components ................................................................2-2 PART 2 ONECELL COMPONENT INSTALLATION Chapter 3 Baseband Controller installation Preparing for Baseband Controller installation..........................................................3-2 Installing the Baseband Controller into a rack...........................................................3-2 Chapter 4 RP5100i installation RP5100i installation overview ...................................................................................4-2 Ceiling mount.............................................................................................................4-3 Mounting the Radio Point on the ceiling tile ......................................................4-5 Contents ivM0300A2 4.0.11 January 2020 D R A F T Mounting the Radio Point above the ceiling tile ...............................................4-15 Flown mount ............................................................................................................4-22 Flown mount installation...................................................................................4-24 Pole mount ...............................................................................................................4-31 Pole mount installation ......................................................................................4-31 Chapter 5 RP5100r installation Rugged Radio Point installation overview ................................................................5-2 Pole mount installation..............................................................................................5-4 Vertical pole mount .............................................................................................5-4 Wall mount installation ............................................................................................5-10 PART 3 APPENDICES Appendix A Safety Radiation Exposure Statement .................................................................................. A-2 FCC Part 15 ........................................................................................................ A-2 EN55032............................................................................................................. A-2 Human exposure limits for OneCell deployments.................................................... A-2 Reference documents ......................................................................................... A-3 Appendix B Installation troubleshooting Baseband Controller LED patterns ........................................................................... B-2 Radio Point LED patterns ......................................................................................... B-4 Appendix C Specifications Electrical ratings and technical data ......................................................................... C-2 SPF/SPF+ specifications ........................................................................................... C-2 Appendix D Field Replaceable Units FRU overview ........................................................................................................... D-2 Replacing Baseband Controller modules.................................................................. D-2 Prerequisites .................................................................................…

Text truncated - open the document above for the full version.

D R A F T Part III: Appendices Appendix A Safety Appendix B Installation troubleshooting Appendix C Specifications Appendix D Field Replaceable Units Appendix E Cable installation and power separation guidelines D R A F T OneCell ® Installation, RP5000 series, Release 4.0A-1 DR AFT Appendix A Safety This appendix contains specifications for CommScope OneCell, including FCC information and technical data. Radiation Exposure StatementA-2 Human exposure limits for OneCell deploymentsA-2 Appendix A Safety A-2M0300A2 4.0.11 January 2020 D R A F T Radiation Exposure Statement Important: Changes or modifications not expressly approved by CommScope LLC could void your authority to operate the equipment. FCC Part 15 The Baseband Controller and RP5100 have been tested and found to comply with the limits for Class A equipment, pursuant to Part 15 of the FCC Rules. NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. For more information, see the publication femtocells and Health at  http:// www.femtoforum.org or visit the FCC website at www.fcc.gov. EN55032 WARNING This equipment is compliant with Class A of EN55032. In a residential environment, this equipment may cause radio interference. Human exposure limits for OneCell deployments The human exposure limits for the OneCell product is calculated by using the Maximum Permissible Exposure (MPE) method associated with fixed-type transmitter devices at a minimum exposure distance of 20 cm. Table A-1 includes values for one Radio Point (RP) and four Radio Points per chassis. Table A-1. RF exposure for OneCell at maximum power internal antennas Parameter RPM- A5A11- B66 RPM- A5A11- B02 RPM- I5A11- B01 RPM- I5A11- B03 RPM- I5A11- B07 RPM- A5A11- B12 RPM- A5A11- B14 RPM- A5A11- B17 Tx Power (dBm) per antenna 24.1324.2324.2524.0024.7021.8821.4521.70 Tx Loss (dB)00000000 Tx Antenna Gain (dBi) 44444444 Transmitter Duty Cycle % 100100100100100100100100 Number of Antennas (MIMO) 22222222 Contribution due to mul tiple antennas (dB) 3.01033.01033.01033.01033.01033.01033.01033.0103 Derived Total EIRP (dBW) 1.1401.2401.2601.0101.710-1.110-1.540-1.290 Bands662137121417 Frequency Range (MHz) 2110-22001930-19902110-21701805-18802620-2690729 - 746758 - 768734 - 746 Point Source Total EIR P (watts) 1.3001.3311.3371.2621.4830.7750.7020.743 Power Density (W /m2) @ 20 cm 2.5872.6472.5692.5102.9501.5411.3961.478 1. For persons with implants, the maximum calculated distance of 30cm. This applies to any combination of up to four radio modules in Bands 1,3 and 7. 2. For general public and workers, a measured distance of 5mm was determined. This applies to any combination of up to four radio modules in Bands 1,3 and 7. 3. For general public and workers, a calculated dist ance of 20cm was determined. This applies to any combination of up to four radio modules in Bands 2 and 66. Appendix A Safety OneCell ® Installation, RP5000 series, Release 4.0A-3 DR AFT Reference documents [1] Federal Communications Commission Document OET Bulletin 65, Supplement C, 2001, Evaluating Compliance with FCC guidelines for Human Exposure to radio Appendix A Safety A-4M0300A2 4.0.11 January 2020 D R A F T frequency Electromagnetic Fields, US Federal Communications Commission, Office of Engineering and Technology June 2001. [2] Federal Communications Commission Document OET Bulletin 56, “Questions and answers about biological effects and potential hazards of radio frequency electromagnetic fields”, Federal Communications Commission Office of Engineering and Technology, August 1999. [3] ICNIRP Guidelines for limiting exposure to time varying electric, magnetic and electromagnetic fields up to 300 GHz. International Commission on Non Ionizing Radiation, published in Health Physics 74 (4): 494-522; 1998 [4] ICNIRP Statement on EMF-Emitting New Technologies, International Commission on Non-Ionizing Radiation, published in Health Physics 94 (4):376-392, 2008 [5] 3GPP Document 3GPP TS 36.104 version 10.11.0 Release 10,” LTE Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception” OneCell ® Installation, RP5000 series, Release 4.0B-1 DR AFT Appendix B Installation troubleshooting This section contains information on troubleshooting the OneCell installation. It includes the LED patterns for the Baseband Controller and Radio points. Baseband Controller LED patternsB-2 Radio Point LED patternsB-4 Appendix B Installation troubleshooting B-2M0300A2 4.0.11 January 2020 D R A F T Baseband Controller LED patterns The Baseband Controller has four LEDs on the front panel. The following table shows •Display pattern for each LED •What the pattern indicates •Action to take, if any, to resolve the issue LEDDisplay PatternIndicatesAction to Take STATUSGreen, solidPower On Sectors up None Amber, solidSelf-test failureReplace Baseband Controller Green, blinkingFirmware upgrade from DMS Sectors not up None Amber, blinkingNo configuration from DMS• Check DMS availability • Check if the provisioning is correct • Escalate to operator OFFBC rebooting after upgradeNone Red, solid*Error in system - software or hardware issues detected Replace Baseband Controller Module RP ERRORGreen, solidPower On None Amber, solidSelf-test failureReplace Baseband Controller Amber, blinkingNo Radio Points connectedCheck RP cable OffRadio Points connected, firmware upgrade from DMS None Red, blin…

Text truncated - open the document above for the full version.

250 Apollo Drive Suite 100 Chelmsford, MA 01824 T: +1 978-250-3000 Tune Up Procedure Declaration 10/20/2019 To: Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle, #1 Littleton, MA 01460 Gentlemen: This letter declares that the product associated with the submission of FCC ID QHYRPM-A5A11-B14 does not require any tune up procedure for proper operation. Sincerely, Kevin Craig Consulting Mechanical Engineer 10/20/2019

250 Apollo Drive Suite 100 Chelmsford, MA 01824 T: +1 978-250-3000 FCC Confidentiality Request Letter 1/6/2020 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle, #1 Littleton, MA 01460 Re: Confidentiality Request FCC ID QHYRPM-A5A11-B14 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, CommScope Technologies LLC hereby requests permanent confidential treatment of information accompanying this application as outlined below: 1. Parts List/Bill of Materials 2. Schematic Diagrams 3. Circuit/Technical Description 4. Block Diagram 5. Assembly Drawings CommScope Technologies LLC. also, hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of 180 days: 1. External and Internal Photos 2. Test photos 3. User Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, ___________________________ Kevin Craig Consulting Mechanical Engineer 1/6/2020

250 Apollo Drive Suite 100 Chelmsford, MA 01824 T: +1 978-250-3000 Agent’s Authorization Letter 1/8/2020 I do hereby authorize, until further notice, Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle, #1 Littleton, MA 01460, to act on our behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47 CFR. This authorization includes, but is not limited to, the signing of Form 731. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 853A. Certified By: __________________ Kevin Craig Consulting Engineer. 1/8/2020

250 Apollo Drive Suite 100 Chelmsford, MA 01824 T: +1 978-250-3000 Limited Single Modular Approval Request Company Name: CommScope Technologies, LLC FCC ID: QHYRPM-A5A11-B14 To Whom It May Concern, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v02’. FCC ID: QHYRPM-A5A11-B14 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 ‘Modular Certification Guide v02 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) 1) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly; The Radio Module has its own RF shielding as shown in Figure 1 at the end of this document. 2) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal; This requirement is met only when the Radio Module is connected to a host that must be designed or approved by CommScope Technologies LLC. 3) The module must contain power supply regulation on the module; The Radio Module has its own power supply regulation that is power from +12VDC from the host. 4) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b); The Radio Module has a unique antenna connector to support a bolted on attached antenna PCBA. 5) The module must demonstrate compliance in a stand-alone configuration; The Radio Module was tested in a stand-alone configuration. The test was performed in an open enclosure with the module exposed and attached to a digital board representing typical CommScope host configuration. 6) The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748); The Radio Module will be labeled with FCC ID: QHYRPM- A5A11-B14 as shown in Figure 2 at the end of this document 7) The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee; The Radio Module was tested for compliance with FCC rule Part 90. The integration of the Radio Module is done by CommScope or a professional installer, approved by CommScope. 8) The module must comply with RF exposure requirements. The Radio Module complies with RF exposure requirements as shown in the MPE documents. 250 Apollo Drive Suite 100 Chelmsford, MA 01824 T: +1 978-250-3000 Figure 1 250 Apollo Drive Suite 100 Chelmsford, MA 01824 T: +1 978-250-3000 Figure 2

Band 14 External photos – Module mounted on the heat sink FCC ID: QHYRPM-A5A11-B14 Bottom – Module Top - Module

Band 14 Internal Photos FCC ID: QHYRPM-A5A11-B14 Bottom – Module Top - Module

Report No.: FCC_RF Exposure_LT19092001-CMM-001B14 Rev_3.0 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: FCC_RF Exposure_LT19092001-CMM-001B14 Rev_3.0 FCC ID: QHYRPM-A5A11-B14 Test Model: RPM-A5A11-B14 Host Name: RP5100 Base Band Module Series Model: N/A Received Date: 10/03/2019 Test Date: 10/03/2019-10/11/2019 Issued Date: 01/20/2020 Standards: FCC Part 2 (Section 2.1093) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 Applicant: CommScope Address: 900 Chelmsford St, Lowell, MA 01851 Issued By: Bureau Veritas Consumer Products Services, Inc. Lab Address: 1 Distribution Center Cir #1, Littleton, MA 01460 Test Location (1): 1 Distribution Center Cir #1, Littleton, MA 01460 FCC Registration / Designation Number: 886956/US1028 Bureau Veritas Consumer Products Services Inc. is accredited by the American Association for Laboratory Accreditation for the specific scope of accreditation under Certificate Number 1627-01. This report may contain data which is not covered by the A2LA accreditation Report No.: FCC_RF Exposure_LT19092001-CMM-001B14 Rev_3.0 Page No. 2 / 6 Report Format Version: 6.1.1 able of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 3 Conclusion ............................................................................................................................................ 6 Report No.: FCC_RF Exposure_LT19092001-CMM-001B14 Rev_3.0 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued FCC_RF Exposure_LT19092001-CMM-001B14 Orignal Release 12/11/2019 FCC_RF Exposure_LT19092001-CMM-001B14 Rev_1.0 Updated Per TCB Review 12/16/2019 FCC_RF Exposure_LT19092001-CMM-001B14 Rev_2.0 Updated Per TCB Review 01/08/2020 FCC_RF Exposure_LT19092001-CMM-001B14 Rev_3.0 Updated Per EUT Information 01/20/2020 Report No.: FCC_RF Exposure_LT19092001-CMM-001B14 Rev_3.0 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: OneCell Radio Point Brand: CommScope Test Model: RPM-A5A11-B14 Host Name: RP5100 Base Band Module Series Model: N/A Sample Status: Sample Received in good condition Applicant: CommScope Test Date: 10/03/2019-10/11/2019 Standards: FCC Part 2 (Section 2.1093) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services, Inc., Littleton Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: 01/20/2020 Chen Ge / Test Engineer Approved by : , Date: 01/20/2020 Shuo Zhang / Engineer Reviewer Report No.: FCC_RF Exposure_LT19092001-CMM-001B14 Rev_3.0 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain The antenna type is External antenna with 4 dBi gain. Report No.: FCC_RF Exposure_LT19092001-CMM-001B14 Rev_3.0 Page No. 6 / 6 Report Format Version: 6.1.1 2.5 Calculation Result of Maximum Conducted Power Frequency (MHz) Max Power (dBm) Max Power (mW) Turn-Up Tolerance Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 763 24.48 280 ±1dB 4 20 0.17 1 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 3 Conclusion Conclusion: MPE = 0.17 mW/cm2 <0.491 mW/cm2 --- END ---

Report No.: RF_FCC_LT19092001-CMM-001B14 Rev_4.0 Page No. 1 / 42 Report Format Version: 6.1.1 FCC Test Report Report No.: RF_FCC_LT19092001-CMM-001B14 Rev_4.0 FCC ID: QHYRPM-A5A11-B14 Test Model: RPM-A5A11-B14 Host Name: RP5100 Base Band Module Series Model: N/A Received Date: 10/03/2019 Test Date: 10/03/2019-10/11/2019 Issued Date: 01/19/2020 Standards: FCC Part 2, FCC Part 90 Applicant: CommScope Address: 900 Chelmsford St, Lowell, MA 01851 Issued By: Bureau Veritas Consumer Products Services, Inc. Lab Address: 1 Distribution Center Cir #1, Littleton, MA 01460 Test Location (1): 1 Distribution Center Cir #1, Littleton, MA 01460 FCC Registration / Designation Number: 886956/US1028 Bureau Veritas Consumer Products Services Inc. is accredited by the American Association for Laboratory Accreditation for the specific scope of accreditation under Certificate Number 1627-01. This report may contain data which is not covered by the A2LA accreditation Report No.: RF_FCC_LT19092001-CMM-001B14 Rev_4.0 Page No. 2 / 42 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Test Site And Instruments ................................................................................................................... 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Configuration of System under Test .................................................................................................... 8 3.3 EUT Operating Conditions .................................................................................................................. 8 3.4 General Description of Applied Standards .......................................................................................... 9 4 Test Types and Results ...................................................................................................................... 10 4.1 E.R.P Measurement .......................................................................................................................... 10 4.1.1 Limits of E.R.P Measurement ............................................................................................................ 10 4.2 Test Procedures ................................................................................................................................ 10 4.2.1 Test Setup ........................................................................................................................................... 11 4.2.2 Test Results ....................................................................................................................................... 12 4.3 Frequency Stability Measurement..................................................................................................... 13 4.3.1 Limits of Frequency Stability Measurement ...................................................................................... 13 4.3.2 Test Procedure .................................................................................................................................. 13 4.3.3 Test Setup .......................................................................................................................................... 14 4.3.4 Test Results ....................................................................................................................................... 14 4.4 Occupied Bandwidth Measurement .................................................................................................. 15 4.4.1 Limits of Occupied Bandwidth Measurement .................................................................................... 15 4.4.2 Test Procedure .................................................................................................................................. 15 4.4.3 Test Setup .......................................................................................................................................... 15 4.4.4 Test Result ......................................................................................................................................... 16 LTE band 14 ................................................................................................................................................. 16 4.5 Band Edge Measurement ................................................................................................................. 19 4.5.1 Limits of Band Edge Measurement ................................................................................................... 19 4.5.2 Test Setup .......................................................................................................................................... 19 4.5.3 Test Procedures ................................................................................................................................. 19 4.5.4 Test Results ....................................................................................................................................... 20 4.6 Peak To Average Ratio ................................................................................................................…

Text truncated - open the document above for the full version.

Radiated Emission Test below 1GHz Front View Radiated Emission Test below 1GHz Rear View Radiated Emission Test above 1GHz Front View Radiated Emission Test above 1GHz Rear View