QIPELS62-WIoT Module

Technical Documentation ELS62 Hardware Interface Description 1VV0301851 - Rev. 1 v01.100a 2023-9-27 Released Confidential 1VV0301851 Rev. 1Page 2 of 129 2023-9-27 129 ELS62 Hardware Interface Description 4 Contents Contents ........................................................................................................................................... 2 Tables ............................................................................................................................................... 5 Figures.............................................................................................................................................. 6 1Applicability Table .................................................................................................................. 8 2Introduction............................................................................................................................ 9 2.1 Scope .............................................................................................................................................. 9 2.2 Audience ........................................................................................................................................ 9 2.3 Contact Information, Support ................................................................................................... 9 2.4 Conventions .................................................................................................................................. 9 2.5 Terms and Conditions................................................................................................................ 10 2.6 Disclaimer .................................................................................................................................... 10 2.7 Key Features at a Glance........................................................................................................... 11 2.8 ELS62 System Overview ........................................................................................................... 16 2.9 Circuit Concept ............................................................................................................................ 17 3Interface Characteristics ......................................................................................................19 3.1 Application Interface ................................................................................................................. 19 3.1.1Pad Assignment .............................................................................................................19 3.1.2Signal Properties ........................................................................................................... 24 3.1.2.1Absolute Maximum Ratings ...................................................................... 30 3.1.3USB Interface ................................................................................................................. 31 3.1.4Serial Interface ASC0 .................................................................................................... 32 3.1.5Serial Interface ASC1 .................................................................................................... 34 3.1.6UICC/SIM/USIM Interface ............................................................................................ 35 3.1.6.1Enhanced ESD Protection for SIM Interface ......................................... 37 3.1.7Digital Audio Interface (DAI)........................................................................................ 38 3.1.7.1Pulse Code Modulation Interface (PCM)................................................ 38 3.1.7.2Inter IC Sound Interface (I 2 S) .................................................................... 39 3.1.7.3Solutions for the Digital Audio Interface................................................ 40 3.1.8Analog Audio Interface................................................................................................. 41 3.1.8.1Microphone Inputs and Supply ............................................................... 41 3.1.8.2Loudspeaker Output .................................................................................. 43 3.1.8.3Electrical Characteristics of the Voiceband Part .................................. 44 3.1.9GPIO Interface................................................................................................................ 45 3.1.10 Control Signals ............................................................................................................... 47 3.1.10.1 Status LED ..................................................................................................... 47 3.1.10.2 Power Indication Circuit............................................................................. 47 3.1.10.3 Host Wakeup ................................................................................................ 48 3.1.10.4 Fast Shutdown ............................................................................................. 48 3.2 RF Antenna Interface ................................................................................................................. 50 3.2.1Antenna Interface Specifications............................................................................... 51 3.2.2Antenna Installation......................................................................................................57 3.2.3RF Line Routing Design ................................................................................................ 59 3.2.3.1Line Arrangement Examples.................................................................... 59 3.2.3.2Routing Example.......................................................................................... 63 1VV0301851 Rev. 1Page 3 of 129 2023-9-27 129 ELS62 Hardware Interface Description 4 3.3 Sample Application ..........…

Text truncated - open the document above for the full version.

Telit Cinterion Deutschland GmbH Registered Office: München - Amtsgericht München, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Directors: Eyal Shefer, Jörg Erdmann Federal Communications Commission Equipment Authorization Division, Application Processing Branch Mills Road 7435 Oakland Columbia MD 21046 USA Telit Cinterion Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Berlin, 2023.08.16 U.S. AGENT FOR SERVICE OF PROCESS - LETTER OF ATTESTATION U.S. Designated Agent: Company Name: Mobilogix Inc. FRN: 0025512666 Contact Name: Ramy Mourad, R&D Director Company Address: 5500 Trabuco Rd Suite 150 - Irvine – CA - United States Telephone No.: +1 949 540 1276 E-mail: [email protected] This letter is to confirm that we designate the above U.S. representative as agent for service of process for Telit Cinterion Deutschland GmbH as noted below, for all the future FCC submissions. Telit Cinterion Deutschland GmbH and Mobilogix Inc. are companies belonging to the same group Telit IoT Solutions Holding LTD. The applicant accepts and acknowledges the obligation to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The agent is not affiliated with a test lab or TCB. Applicant: Company Name: Telit Cinterion Deutschland GmbH Grantee Code: QIP FRN: 0007412448 Company Address: Siemensdamm 50, Berlin 13629, Germany Contact Name: Leandro Wan-Dall Telephone No.: +49 30 166355178 E-mail: [email protected] Best Regards, ___________________________ _______________________ Leandro Wan-Dall Ramy Mourad DocuSign Envelope ID: 358D879A-301D-47CC-BF5C-819911B3BEA3

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Telit Cinterion Deutschland GmbH Address Siemensdamm 50,Berlin 13629,Germany Grantee Code QIP FCC ID QIPELS62-W Authorized Contact Name Leandro Wan-Dall Contact Email [email protected] Contact Phone 4930166355178 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept t hat they are the responsible party and agree to abide by t heir responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Telit Cinterion Deutschland GmbH] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Telit Cinterion Deutschland GmbH] ( “the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2023-08-18 Print Name: Leandro Wan-Dall Title: Head of Certification Management *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Telit Cinterion Deutschland GmbH telit.com/contact-us Registered Office: München - Amtsgericht München, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Directors: Jörg Erdmann, Eyal Shefer Telit Cinterion Deutschland GmbH – Siemensdamm 50 – 13629 Berlin - Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch Mills Road 7435 Oakland Columbia MD 21046 USA Telit Cinterion Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Leandro Wan-Dall Office Phone: +49 30 166355178 Email Address: [email protected] September 26, 2023 Ref: FCC Modular approval letter for FCC ID: QIPELS62-W TO WHOM lT MAY CONCERN The following attestation addresses the requirements to support single modular approval pursuant to §15.212 of the Commission‘s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §1 5.203, 1 5.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of §1 5.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance X Telit Cinterion Deutschland GmbH telit.com/contact-us Registered Office: München - Amtsgericht München, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Directors: Jörg Erdmann, Eyal Shefer with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §1 5.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see §15.31(i)). (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X * Shall provide a detailed explanation if the answer is “No”. If you have any questions, please feel free to contact us at the address shown above. Sincerely, Telit Cinterion Deutschland GmbH X Leandro Wan-Dall Head of Certification Management

Telit Cinterion Deutschland GmbH telit.com/contact-us Registered Office: München - Amtsgericht München, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Directors: Jörg Erdmann, Eyal Shefer Telit Cinterion Deutschland GmbH – Siemensdamm 50 – 13629 Berlin - Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 - USA Telit Cinterion Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Leandro Wan-Dall Office Phone: +49 30 166355178 Email Address: [email protected] August 30, 2023 LONG-TERM CONFIDENTIALITY REQUEST Pursuant to Paragraphs §0.457 and 0.459 of the Commission‘s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Telit Cinterion Deutschland GmbH requests confidentiality for the following product: FCC ID Number Product Title/Model QIPELS62-W ELS62-W For the product stated above, we request that the following information be held confidential: 1. Operational Description 2. Schematic(s) 3. Block Diagrams 4. BOM List 5. Tune up procedure These items contain detailed system and equipment description and related information about the product which Telit Cinterion Deutschland GmbH considers to be proprietary, confidential and a custom design which otherwise would only be released to qualified tech and is not released to the general public. Since this design is a basis from which future technological product will evolve, Telit Cinterion Deutschland GmbH also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Telit Cinterion Deutschland GmbH telit.com/contact-us Registered Office: München - Amtsgericht München, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Directors: Jörg Erdmann, Eyal Shefer Sincerely, X Leandro Wan-Dall Head of Certification Management

Telit Cinterion Deutschland GmbH telit.com/contact-us Registered Office: München - Amtsgericht München, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Directors: Jörg Erdmann, Eyal Shefer Telit Cinterion Deutschland GmbH – Siemensdamm 50 – 13629 Berlin - Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 - USA Telit Cinterion Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Leandro Wan-Dall Office Phone: +49 30 166355178 Email Address: [email protected] August 30, 2023 Ref: Agent letter for FCC ID: QIPELS62-W We, Telit Cinterion Deutschland GmbH Siemensdamm 50 13629 Berlin — Germany hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. Add: No.1 Workshop, M-10, Middle Section Science & Tech, Shenzhen, China Keny Xu Tel: +86-755-2532 8629 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We declare that our authorized agent is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by our authorized agent on our behalf shall have the same effect as acts of our own. Telit Cinterion Deutschland GmbH telit.com/contact-us Registered Office: München - Amtsgericht München, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Directors: Jörg Erdmann, Eyal Shefer This agreement expires one year from the current date. Sincerely, X Leandro Wan-Dall Head of Certification Management

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 2 Appendix External Photos for SZCR2308002477AT FCC ID: QIPELS62-W SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 2 EUT Constructional Details (EUT Photos) - End of the Appendix -

1 2 2022/08/30 2023/08/15 First release Add FCC ID Una Yan David Kuo N/AN/A N/AN/A 1:1 ELS62-W Bailey Tan scale:1:1 字体Arial,3pt 字體Arial,3pt 字體Arial,3pt 字體Arial,3pt part number,字Arial,3pt ,字Arial,3pt Laser IMEI, Barcode type: Date matrix, barcode content: 111111112222223. 2. PN: S30960-S7300-A110 IMEI=TAC(8 digits)+ SN(6 digits) + 1 digit checksum( 3. IMEI: 111111112222223 IMEI digital range (total 15 digital) : IMEI(15 digits) = 111111112222223 1st-8th digits - XX TAC code(35907732) 9th-14th digits - serial number (000000-999999) The 15th digit of IMEI = Check Sum,generate by FXN Model: ELS62-WFCC ID: QIPELS62-W FCC ID: QIPELS62-W Date matrix parameter: elements width: 7dots ECC: 0 1. Model: ELS62-W 11111111 222222 3DC Made in China N S30960-S7300-A110 ANATEL: 12747-22-05015 ANATEL: 12747-22-05015 /T99W321.12/02/4 of 10 Model: ELS62-W 11111111 222222 3 DC Made in China N S30960-S7300-A110 Mini 5*5mm Mini 5mm Mini 3.5mm David Kuo

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 2 Appendix Internal Photos for SZCR2308002477AT FCC ID: QIPELS62-W SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 2 EUT Constructional Details (EUT Photos) - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247704 Page: 1 of 11 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2308002477AT Applicant: Telit Cinterion Deutschland GmbH Address of Applicant: Siemensdamm 50, Berlin 13629, Germany Manufacturer: Thales DIS AIS Deutschland GmbH Address of Manufacturer: Werinherstr. 81, 81541 Munich, Germany Factory: Nanning Fulian Fugui Precision Industrial Co., Ltd. Address of Factory: Factory B Foxconn Nanning Industrial Park No. 51, Tongle Road, Nanning Guangxi 530033 China Equipment Under Test (EUT): EUT Name: IoT Module Model No.: ELS62-W Trade Mark: CINTERION FCC ID: QIPELS62-W Standard(s) : 47 CFR Part 1.1307 47 CFR Part 1.1310 FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-08-01 Date of Evaluation: 2023-08-01 to 2023-08-28 Date of Issue: 2023-08-29 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247704 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2023-08-29 Original Authorized for issue by: Calvin Weng/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247704 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 5 Measurement and Calculation ............................................................................................................... 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247704 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: For RF module: DC3.8V For mother board: DC12V Support Network: GSM, GPRS, EGPRS Operation Frequency Band: GSM850/PCS1900 Modulation Type: GMSK for GSM/GPRS/EGPRS; 8PSK for EGPRS; GPRS Class: 12 EGPRS Class: 12 Antenna Type: Dipole Antenna Antenna Gain: GSM850: 5.17dBi PCS1900: 2.17dBi LTE Operation Frequency Band: LTE FDD Band 2,4,5,7,38,40,41(2535MHz-2675MHz),66 Modulation Type: QPSK, 16QAM LTE Power Class: Level 3 Antenna Type: Dipole Antenna Antenna Gain: LTE B2:2.17dBi, B4: 2.17dBi, B5: 5.17dBi, B7:0dBi; B38: 0dBi; B40:0dBi, B41: 0dBi; B66: 2.17dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: >20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247704 Page: 5 of 11 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247702 Page: 1 of 22 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2308002477AT Applicant: Telit Cinterion Deutschland GmbH Address of Applicant: Siemensdamm 50, Berlin 13629, Germany Manufacturer: Thales DIS AIS Deutschland GmbH Address of Manufacturer: Werinherstr. 81, 81541 Munich, Germany Factory: Nanning Fulian Fugui Precision Industrial Co., Ltd. Address of Factory: Factory B Foxconn Nanning Industrial Park No. 51, Tongle Road, Nanning Guangxi 530033 China Equipment Under Test (EUT): EUT Name: IoT Module Model No.: ELS62-W Trade Mark: CINTERION FCC ID: QIPELS62-W Standard(s) : 47 CFR Part 2 47 CFR Part 22 subpart H 47 CFR Part 24 subpart E Date of Receipt: 2023-08-01 Date of Test: 2023-08-01 to 2023-08-16 Date of Issue: 2023-08-17 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247702 Page: 2 of 22 Revision Record Version Chapter Date Modifier Remark 01 2023-08-17 Original Authorized for issue by: Calvin Weng/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247702 Page: 3 of 22 2 Test Summary Test Item FCC Rule No. Requirements Verdict Effective (Isotropic) Radiated Power Output Data §2.1046, §22.913, §24.232 ERP≤7W(GSM850) EIRP≤2W(PCS1900) PASS Peak-Average Ratio §24.232 ≤13dB PASS Modulation Characteristics §2.1047 Digital modulation PASS Bandwidth §2.1049(h) OBW: No limit EBW: No limit PASS Band Edge Compliance §2.1051, §22.917, §24.238 ≤ -13dBm/1%*EBW, in 1 MHz bands immediately outside and adjacent to the frequency block. PASS Spurious emissions at antenna terminals §2.1051, §22.917, §24.238 ≤ -13dBm PASS Field strength of spurious radiation §2.1051, §22.917, §24.238 ≤ -13dBm PASS Frequency stability §2.1055, §22.355, §24.235 ≤ ±2.5ppm. PASS SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230800247702 Page: 4 of 22 3 Contents Page 1 Cover Page ................................................................................................................................................. 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Test Frequency .................................................................................................................................. 6 4…

Text truncated - open the document above for the full version.