QIPPLS83-W-BModule

Cinterion ® PLSx3 Hardware Interface Description Version:01.300 DocId:PLSx3_HID_v01.300 GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD- UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON THALES DIS AIS DEUTSCHLAND GMBH (“THALES”) PRODUCTS. THE SPECIFI- CATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT THALES'S DISCRETION. THALES GRANTS A NON-EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANS- FER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISAS- SEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THALES DISCLAIMS ALL WARRANTIES AND LIABILI- TIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIVERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CON- STRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con- tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © 2022, THALES DIS AIS Deutschland GmbH Trademark Notice Thales, the Thales logo, are trademarks and service marks of Thales and are registered in certain coun- tries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this document are property of their respective owners. tPLSx3_HID_v01.3002022-09-27 Confidential / Released Cinterion ® PLSx3 Hardware Interface Description 2 Page 2 of 133 Document Name: Cinterion ® PLSx3 Hardware Interface Description Version: 01.300 Date: 2022-09-27 DocId: PLSx3_HID_v01.300 Status Confidential / Released Cinterion ® PLSx3 Hardware Interface Description Contents 131 tPLSx3_HID_v01.3002022-09-27 Confidential / Released Page 3 of 131 Contents 1Introduction ................................................................................................................. 9 1.1Product Variants ................................................................................................ 9 1.2Key Features at a Glance ................................................................................ 10 1.2.1Supported Frequency Bands .............................................................. 14 1.3PLSx3 System Overview ................................................................................. 16 1.4Circuit Concept ................................................................................................ 17 2Interface Characteristics .......................................................................................... 18 2.1Application Interface ........................................................................................ 18 2.1.1Pad Assignment .................................................................................. 18 2.1.2Signal Properties................................................................................. 22 2.1.2.1Absolute Maximum Ratings ................................................ 27 2.1.3USB Interface...................................................................................... 28 2.1.3.1Reducing Power Consumption............................................ 29 2.1.4Serial Interface ASC0 ......................................................................... 30 2.1.5Serial Interface ASC1 ......................................................................... 32 2.1.6UICC/SIM/USIM Interface ................................................................... 34 2.1.6.1Enhanced ESD Protection for SIM Interface ....................... 36 2.1.6.2SIM_SWITCH Line .............................................................. 37 2.1.7GPIO Interface .................................................................................... 38 2.1.8Analog-to-Digital Converter (ADC)...................................................... 39 2.1.9Control Signals.................................................................................... 40 2.1.9.1Status LED .......................................................................... 40 2.1.9.2Power Indication.................................................................. 41 2.1.9.3Fast Shutdown .................................................................... 42 2.1.9.4Remote Wakeup.................................................................. 43 2.1.9.5Antenna Switch ................................................................... 44 2.2RF Antenna Interface ....................................................................................... 45 2.2.1Antenna Interface Specifications ........................................................ 46 2.2.2Antenna Installation ............................................................................ 54 2.2.3RF Line Routing Design ...................................................................... 55 2.2.3.1Line Arrangement Examples ............................................... 55 2.2.3.2Routing Example ................................................................. 57 2.3GNSS Antenna Interface ................................................................................. 59 2.3.1GNSS Receiver................................................................................... 59 2.3.2GNSS Antenna ................................................................................... 60 2.3.3G…

Text truncated - open the document above for the full version.

THALES DIS AIS Deutschland GmbH Sitz der Gesellschaft: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Geschä ftsfü hrer: Christoph Caselitz THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 08 September 2022 LONG-TERM CONFIDENTIALITY REQUEST TO WHOM lT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission‘s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, THALES DIS AIS Deutschland GmbH requests confidentiality for the following product: FCC ID Number Product Title/Model QIPPLS83-W-B PLS83-W-B For the product stated above, we request that the following information be held confidential: 1. Block Diagram 2. Schematic Diagram 3. Part List / Tune Up Procedure 4. Operational Description These items contain detailed system and equipment description and related information about the product which THALES DIS AIS Deutschland GmbH considers to be proprietary, confidential and a custom design which otherwise would only be released to qualified tech and is not released to the general public. Since this design is a basis from which future technological product will evolve, THALES DIS AIS Deutschland GmbH also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Sincerely, 10.10.2022 X HEIKE Axel Certification Project Manager Signed by: HEIKE Axel 07/10/2022 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

THALES DIS AIS Deutschland GmbH Sitz der Gesellschaft: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Geschä ftsfü hrer: Christoph Caselitz THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 14 September 2022 Ref: Agent letter for FCC ID: QIPPLS83-W-B We, THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin — Germany hereby authorize Shenzhen UnionTrust Quality and Technology Co., Ltd. Add: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua New District, Shenzhen, China Billy Li Tel: +86-755-28230888 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We declare that our authorized agent is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by our authorized agent on our behalf shall have the same effect as acts of our own. This agreement expires one year from the current date. Sincerely, 10.10.2022 X Axel Heike Certification Project Manager Signed by: HEIKE Axel 07/10/2022 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

THALES DIS AIS Deutschland GmbH Sitz der Gesellschaft: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Geschä ftsfü hrer: Christoph Caselitz THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 08 September 2022 Ref: FCC Modular approval letter for FCC ID: QIPPLS83-W-B TO WHOM lT MAY CONCERN The following attestation addresses the requirements to support modular approval pursuant to §15.212 of the Commission‘s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such in- puts are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §1 5.203, 1 5.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections be- tween the module and the antenna, including the cable). The “professional installa- tion” provision of §1 5.203 is not applicable to modules but can apply to limited mod- ular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §1 5.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 cen- timeters to insure that there is no coupling between the case of the module and sup- porting equipment. Any accessories, peripherals, or support equipment connected to X the module during testing shall be unmodified and commercially available (see §15.31(i)). (vi) The modular transmitter must be equipped with either a permanently affixed la- bel or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating re- quirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such re- quirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure require- ments in its final configuration. X * Shall provide a detailed explanation if the answer is “No”. If you have any questions, please feel free to contact us at the address shown above. Sincerely, 10.10.2022 X Axel Heike Certification Project Manager Signed by: HEIKE Axel 07/10/2022 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

THALES DIS AIS Deutschland GmbH Sitz der Gesellschaft: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Geschä ftsfü hrer: Christoph Caselitz THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 14 September 2022 SHORT-TERM CONFIDENTIALITY REQUEST TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission‘s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, THALES DIS AIS Deutschland GmbH requests confidentiality for the following product: FCC ID Number Product Title/Model QIPPLS83-W-B PLS83-W-B For the product stated above, we request that the following information be held confidential: 1. Test Setup Photos 2. User Manual 3. External and Internal Photographs THALES DIS AIS Deutschland GmbH requests this confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device, which is planned tor 30 th of December 2022. If you have any questions, please feel free to contact us at the address shown above. Sincerely, 10.10.2022 X Axel Heike Certification Project Manager Signed by: HEIKE Axel 07/10/2022 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

THALES DIS AIS Deutschland GmbH Sitz der Gesellschaft: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Geschä ftsfü hrer: Christoph Caselitz THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 07 October 2022 REFERENCING EMC AND RADIO PARAMETER TEST DATA IN EQUIPMENT AUTHORI- ZATION APPLICATIONS TO WHOM lT MAY CONCERN We THALES DIS AIS Deutschland GmbH has a new product (Model No.:PLS83-W-B) based on the original certification (FCC ID: QIPPLS83-W with original grant date: 08/30/2021). In general, the new data-only Cinterion ® PLS83-W-B module is based on the existing Cinterion ® PLS83-W, while remov- ing the voice related features and AT commands by software implementation. For more detailed changes, please refer to Delta report Differences between Cinterion ® PLSx3-W, PLSx3-X, and PLSx3 -W-B, PLSx3-X-B. We comply with the requirements of KDB 484596 D01 Referencing Test Data v01 guidance document for referencing data section as follows: THALES DIS AIS Deutschland GmbH takes full responsibility that the test data as reference compli- ance for the new FCC ID: QIPPLS83-W-B. Sincerely, 10.10.2022 X HEIKE Axel Certification Project Manager Signed by: HEIKE Axel 07/10/2022 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

Differences between Cinterion ® PLSx3-W, PLSx3-X, and PLSx3-W-B, PLSx3-X- B Delta Report Version: 02 DocID: plsx3-w_plsx3-x_plsx3-w-b_plsx3-x-b_sw_delta_v02 Differences between Cinterion ® PLSx3-W, PLSx3-X, and PLSx3-W- B, PLSx3-X -B Page 2 of 8 t plsx3-w_plsx3-x_plsx3-w-b_plsx3-x-b_sw_delta_v02 2022-09-09 Confidential / Released Document Name: Differences between Cinterion ® PLSx3-W, PLSx3-X, and PLSx3-W-B, PLSx3-X-B Version: 02 Date: September 09, 2022 DocId: plsx3-w_plsx3-x_plsx3-w-b_plsx3-x-b_sw_delta_v02 Status: Confidential / Released GENERAL NOTES THE PRODUCT INCLUDING THE SOFTWARE PROVIDED BY THALES DIS AIS DEUTSCHLAND GMBH (“THALES”) WITH THE PRODUCT (“PRODUCT”) IS DEEMED ACCEPTED BY RECIPIENT AND IS PROVIDED WITHOUT INTERFACE TO RECIPIENT’S PRODUCTS. THE DOCUMENTATION AND/OR PRODUCT ARE PROVIDED FOR TESTING, EVALUATION, INTEGRATION AND INFORMATION PURPOSES. COPYRIGHTS THE SOFTWARE OBTAINED FROM THALES TOGETHER WITH THE PRODUCT (“SOFTWARE”) IS THE INTELLECTUAL PROPERTY OF THALES AND/OR ITS LICENSORS. LIMITED LICENCE GRANT SUBJECT TO THE TERMS AND CONDITIONS IN THIS AGREEMENT, THE RECIPIENT, ITS CUSTOMERS AND END-CUSTOMERS OF THE PRODUCT SHALL HAVE A NON-EXCLUSIVE RIGHT TO USE THE PRODUCT OBTAINED FROM THALES. THE RECIPIENT SHALL NOT AND SHALL CONTRACTUALLY BIND ITS CUSTOMERS AND THE END-CUSTOMERS NOT TO TRANSFER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS, DISASSEMBLE OR DECOMPILE THE SOFTWARE OR OTHERWISE USE THE SOFTWARE EXCEPT AS SPECIFICALLY AUTHORIZED BY THE PURPOSE OF THIS AGREEMENT OR BY MANDATORY LAW. THALES SHALL BE A THIRD PARTY BENEFICIARY IN THE AGREEMENTS WITH CUSTOMERS AND END-CUSTOMERS REGARDING THE SOFTWARE. ANY RIGHT, TITLE AND INTEREST IN AND TO THE PRODUCT, OTHER THAN THOSE EXPRESSLY GRANTED TO THE RECIPIENT UNDER THIS AGREEMENT, SHALL REMAIN VESTED WITH THALES OR ITS THIRD PARTY LICENSORS. THLAES IS NOT OBLIGED TO MAKE THE SOURCE CODE OF THE SOFTWARE AVAILABLE TO THE RECIPIENT. DISCLAIMER OF WARRANTY THE DOCUMENTATION AND/OR PRODUCT ARE PROVIDED ON AN “AS IS” BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. THE DOCUMENTATION AND/OR PRODUCT ARE PROVIDED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THALES FURTHER DISCLAIMS ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, COMPLETENESS, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD-PARTY RIGHTS. THIS PRODUCT IS NOT INTENDED FOR USE IN LIFE SUPPORT APPLIANCES, DEVICES OR SYSTEMS WHERE A MALFUNCTION OF THE PRODUCT CAN REASONABLY BE EXPECTED TO RESULT IN PERSONAL INJURY. APPLICATIONS INCORPORATING THE DESCRIBED PRODUCT MUST BE DESIGNED TO BE IN ACCORDANCE WITH THE TECHNICAL SPECIFICATIONS PROVIDED IN THESE GUIDELINES. FAILURE TO COMPLY WITH ANY OF THE REQUIRED PROCEDURES CAN RESULT IN MALFUNCTIONS OR SERIOUS DISCREPANCIES IN RESULTS. FURTHERMORE, ALL SAFETY INSTRUCTIONS REGARDING THE USE OF MOBILE TECHNICAL SYSTEMS, INCLUDING GSM AND GPS PRODUCTS, WHICH ALSO APPLY TO CELLULAR PHONES MUST BE FOLLOWED. THALES CUSTOMERS USING THIS PRODUCT FOR USE IN ANY APPLICATIONS DO SO AT THEIR OWN RISK AND AGREE TO FULLY INDEMNIFY THALES FOR ANY DAMAGES RESULTING FROM ILLEGAL USE. Differences between Cinterion ® PLSx3-W, PLSx3-X, and PLSx3-W- B, PLSx3-X -B Page 3 of 8 t plsx3-w_plsx3-x_plsx3-w-b_plsx3-x-b_sw_delta_v02 2022-09-09 Confidential / Released EXCLUSION OF LIABILITY THALES, ITS LEGAL REPRESENTATIVES AND VICARIOUS AGENTS SHALL – IRRESPECTIVE OF THE LEGAL GROUND – ONLY BE LIABLE FOR DAMAGES IF THE DAMAGE WAS CAUSED THROUGH CULPABLE BREACH OF A MAJOR CONTRACTUAL OBLIGATION (CARDINAL DUTY), I.E. A DUTY THE FULFILMENT OF WHICH ALLOWS THE PROPER EXECUTION OF THE RESPECTIVE AGREEMENT IN THE FIRST PLACE OR THE BREACH OF WHICH PUTS THE ACHIEVEMENT OF THE PURPOSE OF THE AGREEMENT AT STAKE, RESPECTIVELY, AND ON THE FULFILMENT OF WHICH THE RECIPIENT THEREFORE MAY RELY ON OR WAS CAUSED BY GROSS NEGLIGENCE OR INTENTIONALLY. ANY FURTHER LIABILITY FOR DAMAGES SHALL – IRRESPECTIVE OF THE LEGAL GROUND – BE EXCLUDED. IN THE EVENT THAT THALES IS LIABLE FOR THE VIOLATION OF A MAJOR CONTRACTUAL OBLIGATION IN THE ABSENCE OF GROSS NEGLIGENCE OR WILFUL CONDUCT, SUCH LIABILITY FOR DAMAGE SHALL BE LIMITED TO AN EXTENT WHICH, AT THE TIME WHEN THE RESPECTIVE AGREEMENT IS CONCLUDED, THALES SHOULD NORMALLY EXPECT TO ARISE DUE TO CIRCUMSTANCES THAT THE PARTIES HAD KNOWLEDGE OF AT SUCH POINT IN TIME. THALES SHALL IN NO EVENT BE LIABLE FOR INDIRECT AND CONSEQUENTIAL DAMAGES OR LOSS OF PROFIT. THALES SHALL IN NO EVENT BE LIABLE FOR AN AMOUNT EXCEEDING € 20,000.00 PER EVENT OF DAMAGE. WITHIN THE BUSINESS RELATIONSHIP THE OVERALL LIABILITY SHALL BE LIMITED TO A TOTAL OF € 100,000.00. CLAIMS FOR DAMAGES SHALL BECOME TIME-BARRED AFTER ONE YEAR AS OF THE BEGINNING OF THE STATUTORY LIMITATION PERIOD. IRRESPECTIVE OF THE RECIPIENT’S KNOWLEDGE OR GROSS NEGLIGENT LACK OF KNOWLEDGE OF THE CIRCUMSTANCES GIVING RISE FOR A LIABILITY ANY CLAIMS SHALL BECOME TIME-BARRED AFTER FIVE YEARS AS OF THE LIABILITY AROSE. THE AFOREMENTIONED LIMITATION OR EXCLUSION OF LIABILITY SHALL NOT APPLY IN THE CASE OF CULPABLE INJURY TO LIFE, BODY OR HEALTH, IN CASE OF INTENTIONAL ACTS, UNDER THE LIABILITY PROVISIONS OF THE GERMAN PRODUCT LIABILITY ACT (PRODUKTHAFTUNGSGESETZ) OR IN CASE OF A CONTRACTUALLY AGREED OBLIGATION TO ASSUME LIABILITY IRRESPECTIVE OF ANY FAULT (GUARANTEE). SECRECY THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE CONTRACTUAL RELATIONSHIP AND CLASSIFIED AS CONFIDENTIAL OR OTHERWISE RECOGNISABLE AS CONFIDENTIAL, IN PARTICULAR AS TRADE OR COMPANY SECRET AND – AS FAR AS NOT NECESSARY FOR THE ACHIEVEMENT OF THE PURPOSE OF THE CONTRACT – TO NEITHER RECORD NOR FORWARD TO THIRD PARTIES NOR USE IN ANY WAY. EMPLOYEES AND THIRD PARTIES INVOLVED SHALL BE BOUND TO OBSERVE THE ABOVE PROVISIONS. MISCELLANEOUS THE INTERPRETATION OF THIS GENERAL…

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID: QIPPLS83-W-B IC: 7830A-PLS83WB Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo

Label Location

Page 1 of 1 FCC ID: QIPPLS83-W-B IC: 7830A-PLS83WB Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo

Page 1 of 21 Report No.: 220730732EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 TEST REPORT Product Name: Module Trade Mark: CINTERION Model No. / HVIN: PLS83-W-B Report Number: 220730732EMC-1 Test Standards: FCC 47 CFR Part 15 Subpart B ICES-003 Issue 7 FCC ID: QIPPLS83-W-B Test Result: PASS Date of Issue: November 10, 2022 Prepared for: Thales DIS AIS Deutschland GmbH Siemensdamm 50, 13629 Berlin, Germany Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Approved by: Date: November 10, 2022 Kevin Liang Assistant Manager Page 2 of 21 Report No.: 220730732EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 Version Version No. Date Description V1.0 November 10, 2022 Original Page 3 of 21 Report No.: 220730732EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 4 1.4 TEST LOCATION ................................................................................................................................................. 5 1.5 TEST FACILITY ................................................................................................................................................... 5 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 5 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 5 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 5 1.9 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 8 4. TEST CONFIGURATION .......................................................................................................................................... 9 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ........................................................................................................ 9 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................... 9 4.1.2 RECORD OF NORMAL ENVIRONMENT....................................................................................................... 9 4.2 TEST MODES ..................................................................................................................................................... 9 4.3 TEST SETUP .................................................................................................................................................... 10 4.3.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 10 4.3.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 11 4.4 SYSTEM TEST CONFIGURATION ........................................................................................................................ 11 5. REFERENCE DOCUMENTS FOR TESTING ......................................................................................................... 12 6. EMC REQUIREMENTS SPECIFICATION .............................................................................................................. 12 6.1 RADIATED EMISSION ........................................................................................................................................ 12 6.2 CONDUCTED EMISSION .................................................................................................................................... 18 APPENDIX 1 PHOTOS OF TEST SETUP .............................…

Text truncated - open the document above for the full version.

Page 1 of 3 FCC ID: QIPPLS83-W-B IC: 7830A-PLS83WB Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 1 PHOTOS OF TEST SETUP Radiated emission Test Setup-1 (30 MHz~1 GHz) Page 2 of 3 FCC ID: QIPPLS83-W-B IC: 7830A-PLS83WB Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttl…

Text truncated - open the document above for the full version.