
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
EPoX USB Dongle ~ Quick Guide ~ 602A012BLE110 DO NOT PLUG THE USB DONGLE IN YOUR COMPUTER BEFORE YOU COMPLETE THE BLUETOOTH SOFTWARE INSTALLATION! 2 Β 3 DO NOT PLUG THE USB DONGLE IN YOUR COMPUTER BEFORE YOU COMPLETE THE BLUETOOTH SOFTWARE INSTALLATION! If you plugged in the dongle before the software installation, and your system started to detect the USB Bluetooth dongle, please press Cancel button to stop the installation, then remove the dongle. 4 Β 5 6 7 - - - - - 8 FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the userβs authority to operate the equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 9 Branch offices EPoX Headquarter EPoX Computer Co., LTD. 10F, 346, Chung San Rd. Sec 2, Chung Ho City Taipei Hsien, Taiwan TEL: 886-2-2247-9888 FAX: 886-2-2247-7888 http://www.epox.com.tw E-mail:[email protected] EPoX-USA EPoX International Inc. 531 East Jamie Ave La Habra, CA 90631 U.S.A. TEL: 714-680-0898 FAX: 714-680-0858 E-Mail:[email protected] http://www.epox.com/html/default.asp?lang=1 EPoX-Europe EPoX Europe Computer B.V. Noordkade 64, 2741 EZ Waddinxveen, Netherlands TEL: 31-0182-633355 FAX: 31-0182-632744 E-mail:[email protected] http://www.epox.nl/ EPoX-Germany Elito-EPoX Computer GmbH.. 41,Nuernberger Strasse, D-91257, Pegnitz, Germany TEL: +49-9241-9917-15 FAX: +49-9241-9917-71 E-mail:[email protected] http://www.elito-epox.com/ EPoX-Korea EPoX Korea Computer. RM601, Princetel Building 13-20, Youido--Dong, Youngdungpo-Gu., Seuol, Korea TEL: + 882-66729788-9 FAX: + 882-66729787 E-mail:[email protected] 602A012BLE110
FCC ID: QLHCAG0603 Number 1 FRONT SIDE OF EUT FCC ID: QLHCAG0603 Number 2 REAR SIDE OF EUT
FCC ID: QLHCAG0603 Label Location
FCC ID: QLHCAG0603 Number 1 MECHANICAL CONSTRUCTION FCC ID: QLHCAG0603 Number 2 MECHANICAL CONSTRUCTION FCC ID: QLHCAG0603 Number 3 FRONT SIDE MAIN BOARD FCC ID: QLHCAG0603 Number 4 REAR SIDE MAIN BOARD
FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 1 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 1.1. Hopping Channel Separation Plot1(Channel 00) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 2 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot2(Channel 39) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 3 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot3(Channel 78) Comments6dB Emission bandwidth>500kHz FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 4 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 1.2. Number of Hopping Frequency Plot1: FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 5 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 1.3. Hopping Channel Bandwidth Plot1 (Channel 00) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 6 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot2 (Channel 39) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 7 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot3 (Channel 78) Comments All emissions in any 100kHz bandwidth outside the band edge are attenuated more then 20dB from the carrier. FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 8 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 1.4. Dwell Time of Each Frequency within a 30 Seconds Period Plot1 (Channel 00) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 9 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot2 (Channel 39) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 10 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot3 (Channel 78) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 11 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 1.5. Output Power Plot1 (Channel 00) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 12 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot2 (Channel 39) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 13 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot3 (Channel 78) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 14 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 1.6. 100KHz Bandwidth of Frequency Band Edges Plot1 (Channel 00) FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 15 of 15 FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Plot2 (Channel 78)
FCC TEST REPORT Report No. : F353109 SPORTON International Inc. TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT for 47 CFR, Part 15, Subpart C Equipment : USB Dongle Model No. : BT-DG02A FCC ID. : QLHCAG0603 Filing Type : Certification Applicant : EPOX COMPUTER CO., LTD. 10F, No. 346, Sec. 2, Chung San Rd., Chung Ho City, Taipei Hsien, 235 Taiwan, R.O.C. Β The test result refers exclusively to the test presented test model / sample. Β Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. Β Certificate or Test Report must not be used by the applicant to claim the product in this test report endorsement by NVLAP or any agency of U.S. government. SPORTON International Inc. 6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C. FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID. : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : i FAX : 886-2-2696-2255 Issued Date : Sep. 25, 2003 Table of Contents History of this test report..................................................................................................................ii CERTIFICATE OF COMPLIANCE........................................................................................................................1 1. General Description of Equipment under Test.............................................................................................2 1.1. Applicant..........................................................................................................................................................................................2 1.2. Manufacturer ...................................................................................................................................................................................2 1.3. Basic Description of Equipment under Test ....................................................................................................................................2 1.4. Feature of Equipment under Test ...................................................................................................................................................2 2. Test Configuration of Equipment under Test ...............................................................................................4 2.1. Test Manner ....................................................................................................................................................................................4 2.2. Description of Test System .............................................................................................................................................................4 2.3. Connection Diagram of Test System ..............................................................................................................................................6 3. Test Software ...................................................................................................................................................7 4. General Information of Test............................................................................................................................8 4.1. Test Voltage ....................................................................................................................................................................................8 4.2. Standard for Methods of Measurement...........................................................................................................................................8 4.3. Test in Compliance with ..................................................................................................................................................................8 4.4. Frequency Range Investigated .......................................................................................................................................................8 4.5. Test Distance ..................................................................................................................................................................................8 5. Report of Measurements and Examinations ................................................................................................9 5.1. List of Measurements and Examinations ........................................................................................................................................9 5.2. Hopping Channel Separation ........................................................................................................................................................10 5.3. Number of Hopping Frequency .....................................................................................................................................................11 5.4. Hopping Channel Bandwidth.........................................................................................................................................................12 5.5 Dwell Time of Each Frequency within a 30 Seconds Period.........................................................................................................13 5.6 Output Power ................................................................................................................................................................................14 5.7 100KHz Bandwidth of Frequency Band Edges .............................................................................................................................15 5.8 Test of Conducted Emission .........................................................................................................................................................16 5.9 Test of Radiated Emission ............................................................................................................................................................β¦
Text truncated - open the document above for the full version.
FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 1 of 3 FAX : 886-2-2696-2255 Issued : Sep. 25, 2003 1.1. Photographs of Conducted Powerline Test Configuration z The photographs show the configuration that generates the maximum emission. FRONT VIEW REAR VIEW FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 2 of 3 FAX : 886-2-2696-2255 Issued : Sep. 25, 2003 SIDE VIEW FCC TEST REPORT Report No. : F353109 SPORTON International Inc. FCC ID : QLHCAG0603 TEL : 886-2-2696-2468 Page No. : 3 of 3 FAX : 886-2-2696-2255 Issued : Sep. 25, 2003 1.2. Photographs of Radiated Emission Test Configuration z The photographs show the configuration that generates the maximum emission. FRONT VIEW REAR VIEW
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 10.00 mW |

Bluetooth USB Dongle
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
PRINTER ADAPTER
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Bluetooth USB Dongle
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
PRINTER ADAPTER
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
DONGLE
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter