QOCPROMI-MSP102Bluetooth Access Point

1 Promi-MSP™ Installation Guide ver. 2.0 www.initium.co.kr by Bluetooth Enabling Wireless Serial Communications Promi-MSP™ Quick Installation Guide Version 2.0 For Wireless Multi-Serial Communications, based on Bluetooth Technology 2 Promi-MSP™ Installation Guide ver. 2.0 www.initium.co.kr Contents 1. About Promi-MSP™ ............................................ 3 1.1 External View.................................................................................................................. 6 1.2 LED indicators................................................................................................................ 8 2. Installation ........................................................... 9 2.1 Network Settings.......................................................................................................... 10 2.2 LAN Access Profile..................................................................................................... 13 2.3 Firmware Download..................................................................................................... 14 2.4 Serial Port..................................................................................................................... 17 2.4 Reset/Reboot/Quit........................................................................................................ 19 3. Configuration..................................................... 20 3.1 Configuration via Promi-MSP software...................................................................... 20 3.1.1 When Promi-MSP is connected to PC directly............................................... 20 3.1.2 Log in Promi-MSP software.............................................................................. 21 3.1.2 Operation Mode.................................................................................................. 22 3.1.3 Bluetooth............................................................................................................ 29 3.1.4 Connections....................................................................................................... 30 3.1.5 Neighborhoods.................................................................................................. 31 3.1.6 Repeater.............................................................................................................. 32 3.1.7 MSP information................................................................................................ 33 4. COM port Redirector ......................................... 34 4.1 COM port redirecotr..................................................................................................... 34 4.1.1 Virtual COM........................................................................................................ 34 5.1.2 Serial/IP............................................................................................................... 39 4.2 Discovery Protocol...................................................................................................... 41 3 Promi-MSP™ Installation Guide ver. 2.0 www.initium.co.kr Revision History: User Manual of Promi-MSP™ Version Changed Contents Date 1.0 Draft version 01/02/2003 1.1 Added user guide for Promi-MSP software 07/14/2003 1.2 Promi-MSP software upgrade and New commands added 08/11/2003 2.0 New functions of Promi-MSP102 series added 09/10/2004 1. About Promi-MSP™ Promi-MSP™ is a Bluetooth-wireless multiple serial communications port for minimum 7 to maximum 14 devices; an option to conventional multi-serial ports. Wireless Promi- MSP™ results in dramatic installation cost and time savings and fretless application. 4 Promi-MSP™ Installation Guide ver. 2.0 www.initium.co.kr With Promi-SD™ installed at RS-232 interfaced terminals, Promi-MSP™ affords dependable convenience for a variety of serial communications environments. Refer to the figure 1.1. below: <Fig. 1.1> Promi-MSP™ is a wireless multi-serial Bluetooth technology-based server. Bluetooth SIG qualified protocol stack assures standardized, secure and scaleable serial communications. Promi-MSP™ identification of data, per each additional unique Bluetooth SPP enabled device address, prevents data jam. Bluetooth’s 2.4GHz frequency-hopping system voids RF interference from sources such as Wireless LAN. Increased communications security is possible via optional user set-up authentication. Promi-MSP™ transmits data from each Bluetooth terminal to PC via TCP/IP Ethernet. TCP/IP PCs also respond to each Bluetooth terminal wirelessly via Promi-MSP™. Without changing non-TCP/IP serial communications software Promi-MSP™ is accessible via installation of the COM port redirector program. More information is in Appendix 4.1. <Table 1.1> Promi-MSP™ Model Hardware Interface Specifications Promi-MSP 102(a) (Part no. : MSP00-10201) LAN 10/100 x2, Inclusive Hub function. Ethernet/RS232C com. supported Built-in Bluetooth (Max. 7 Bluetooth links) Coverage : 100m Data rate : Max. 723 Kbps Frequency: 2.4GHz COM port redirector 5 Promi-MSP™ Installation Guide ver. 2.0 www.initium.co.kr Promi-MSP 102(b) (Part no. : MSP00-10202) LAN 10/100 x2, Inclusive Hub function. Ethernet/RS232C com. supported Built-in Bluetooth 1 USB A-type port for USB exention dongle (Max. 14 Bluetooth links) - VirtualCOM and Serial/IP Supported Networks HTTP / FTP / Telnet / IP- sharing(NAT) / DHCP /PPP server * Promi-MSP101 was phased out as of August, 2004. One Promi-MSP™ set includes: Hardware Quantity Remarks Promi-MSP™ 1 Power Adapter 1 Antenna 1 RS232 cable 1 Software and Manual in CD 1 USB extension Dongle 1 For Promi-MSP102(b) only Anchor Support 1 Set 6 Promi-MSP™ Installation Guide ver. 2.0 www.initium.co.kr 1.1 External View <Fig. 1.2> Promi-MSP 102(a)/(b) external view ① DIP Switch Users may select the way of data communication with Host. Default setting is TCP/IP communication using no. ④ RJ45 marked EXT, but if users need, data communication by no. ③ RS23…

Text truncated - open the document above for the full version.

1. Block Diagram Promi- MSP USB Type ‘ A ’ RS232 Male Power Connector Adapter 5V AC 110V or AC 220V RJ-45 Ethernet [Ethernet, ADSL etc] RJ-45 Ethernet [Internal] Antenna Connector Antenna [External] Reset Switch DC 5V USB [BT Dongle etc] UART [RS232] 2. Circuit Diagrams MCU (166MHz) Linear RegulatorLinear Regulator DC5V DC3P3VDC1P75V Power SDRAM -16Mbyte Flash -4Mbyte RS-232 PHY Transformer USB [Type ‘A’] Promineo - MSP PHY Transformer RJ45RJ45 Line Driver Bluetooth Module 29.4912MHz 10.000MHz DC5V 25.000MHz

Initium Co., Ltd. www.initium.co.kr Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD21046 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission's Rules (47 C.F.R) and Section §552(b)(4) of the Freedom of Information Act, Initium Co., Ltd. requests confidentiality for the following products: FCC ID Number Product Title / Model QOCPROMI-MSP102 Bluetooth Access Point / Promi-MSP102 For the product stated above, we request that the following information be held confidential: 1) Schematic diagrams 2) Bill of materials (Part List) No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Initium Co., Ltd. trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our products. This material is not customarily available to the general public and we request that it be withheld from public inspection. Sincerely, Je-Kook, Ryu / Managing Director email: [email protected] Initium Co., Ltd. #716. Kumgang Hightech Valley Bldg. 133 Sangdaewon Jungwon Sungnam Kyunggi 462-120 Korea Tel: 82-31-777-5700 Fax: 82-31-777-5704 http://www.initium.co.kr

SK TECH CO., LTD. Page 1 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 External Photographs of EUT <Photograph 1: Front View> SK TECH CO., LTD. Page 2 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 <Photograph 2: Rear View> SK TECH CO., LTD. Page 3 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 <Photograph 3: AC Adapter>

SK TECH CO., LTD. Page 1 of 1 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 FCC ID Label Location & Sample Label is permanently attached on the front of the product 40 mm 30 mm LABEL LOCATION LABEL SAMPLE Bluetooth Access Point Model No.: Promi-MSP102 FCCID:QOCPROMI-MSP102 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Manufacturer By Initium Co., Ltd.

SK TECH CO., LTD. Page 1 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 Internal Photographs of EUT <Photograph 1: Cover removed> SK TECH CO., LTD. Page 2 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 <Photograph 2: Internal View > SK TECH CO., LTD. Page 3 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102

set-up authentication. Promi-MSP™ transmits data from each Bluetooth terminal to PC via TCP/IP Ethernet. TCP/IP PCs also respond to each Bluetooth terminal wirelessly via Promi-MSP™. Without changing non-TCP/IP serial communications software Promi-MSP™ is accessible via installation of the COM port redirector program. Technical specification Bluetooth Spec. v1.1 Supported Bluetooth Profiles: Serial Port, LAN Access, Dial up Networking Range : 10m~100m (Over 100m with High-gain Antenna) Data rate : 723Kbps Additional Interfaces: 4 USB A-type ports for Bluetooth & WiFi 1 Serial Port for a legacy device Size : 147 x 112 x 32mm (HxWxD) COM port Redirector Supported Networking supported HTTP/FTP/Telnet/IP sharing/DHCP client/PPP server/ PPP tunneling/User Authentication (RADIUS)/SNMP v1/v2/v3 Circuit description Promi-MSP’s main parts are in this circuit diagram External DC 5V adaptor and antenna can be plugged into MSP. PROMI-MSP 2 Port Ethernet 1 port USB Host RS232 Port Bluetooth module (Class 1) 16Mbytes SDRAM S3C2510 4Mbytes FLASH ROM External ANTENNA 1 port USB Slave 3.3V, 1.8V regulated output Ethernet PHY Ethernet PHY USB 16bit BUS 16bit BUS MAC 1 MAC 0 USB Host 1 USB Slave HUAR T1 USB Host 0 Memory Controller Line Driver 5V Adaptor 1. MCU(S3C2510) features · 16/32-bit ARM940T RISC Embedded · 4K-byte I-Cache and 4K-byte D-Cache · Memory Controller with 24-bit External Address Pins — 2 Banks of SDRAM for 16/32-bit Bus — 8 Banks of Flash/ROM/SRAM/External I/O for 8/16/32-bit Bus — One External Bus Master with Bus Request/Acknowledge Pins · Two 10/100 Mbps Ethernet Controllers · PCI Host/Agent Controller or CardBus (PCMCIA) Host/Agent Controller — PCI Host mode: 5 (or more) PCI Slots Interface for PCI Cards — PC Card Host mode: 1 PC Card Socket Interface for 16-bit PC Card or CardBus PC Card · AAL5 SAR and UTOPIA L1/L2 · 2 Port Full/Low Speed USB HOST with Root Hub. · 1 Port Full Speed USB Function with Transceiver Spec. 1.1 · Six General-Purpose DMAs · Two High-Speed UARTs · One Console UART · DES and 3DES for IP Security · IIC Serial Interface · Interrupt Controller · Six 32-bit Programmable Timers · 30-bit Watchdog Timer · 64 Programmable I/O Ports — 8 General-Purpose I/O — 6 External Interrupt Request — 6 Timer Output — 4 External DMA Request — 4 External DMA Acknowledge — 21 SAR Signals — 15 UART Signals · Four PLLs for each ARM940T (166MHz),System (133MHz), PCI & PC Card Controller Clock (33/66MHz), USB Host/Device Clock (48MHz), and Ethernet PHY (20/25MHz). · CPU Operating Frequency: Up to 166MHz · AHB Bus Operating Frequency: Up to 133MHz · Package Type: 416 PBGA · Core Operating at 1.8V ±5 %, -40~85 oC · I/O Operating at 3.3V ±5 %, -40~85 oC · 3.3V input/output levels, 5V tolerant only for PCI. 2. POWER : 2 linear regulator is used to generator main power DC 3.3V and 1.8V for core of MCU. 3. CLOCK : 3 clock is generated from OSC, a. 10Mhz for S3C2510 b. 25Mhz for Ethernet PHY.. c. 29.4912Mhz. for serial baud generator 4. Flash memory for data and program storage and SDRAM for MCU operation 5. External port a. 1 serial port b. 2 port ethernet c. 1 USB host port d. 1 antenna connector 6. BLUETOOTH All of the RF circuit except antenna is under the steel can of bluetooth module. Bluetooth module’s simple spec : Specifications Frequency Access Range Speed Transmit power Sensitivity Certification Supports Bluetooth™ 1.1 2.4 GHz ISM Band 100M 1Mbps Typical 16dBm -88dBm Bluetooth™ 1.1 SIG

SK TECH CO., LTD. Page 1 of 42 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 Certificate of Compliance Test Report No.: SKTTRT-050303-003 NVLAP CODE: 200220-0 Applicant: Initium Co., Ltd. Applicant Address: #716. Kumgang Hightech Valley Bldg. 133 Sangdaewon Jungwon Sungnam Kyunggi 462-120 Korea Device Under Test: Bluetooth Access Point FCC ID: QOCPROMI-MSP102 Model No.: Promi-MSP102 Receipt No.: SKTEU05-0101 Date of receipt: February 17, 2005 Date of Issue: March 3, 2005 Location of Testing: SK TECH CO., LTD. 820-2, Wolmoon-Ri, Wabu-Up, Namyangju-Si, Kyunggi-Do, Korea Test Procedure: ANSI C63.4 / 2003 Test Specification: 47CFR, Part 15 Subpart C Equipment Class: DSS - Part 15 Spread Spectrum Transmitter Test Result: The above-mentioned device has been tested and passed. Tested & Reported by: Chang-Min, Moon March 3, 2005 Approved by: Jae-Kyung, Bae March 3, 2005 Signature Date Signature Date Other Aspects: Abbreviations: · OK, Pass = passed · Fail = failed · N/A = not applicable ☞ •This test report is not permitted to copy partly without our permission. •This test result is dependent on only equipment to be used. •This test result is based on a single evaluation of one sample of the above mentioned. •This test report must not be used to claim product endorsement by NVLAP or any agency of the U.S Government. • We certify that this test report has been based on the measurement standards that is traceable to the national or International standards. NVLAP Lab. Code: 200220-0 SK TECH CO., LTD. Page 2 of 42 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 >> CONTENTS << 1. GENERAL ·············································································································4 2. TEST SITE ············································································································4 2.1 Location ·········································································································4 2.2 List of Test and Measurement Instruments ····················································5 2.3 Test Date ········································································································5 2.4 Test Environment ···························································································5 3. DESCRIPTION OF THE EQUIPMENT UNDER TEST ·········································6 3.1 Rating and Physical Characteristics ······························································6 3.2 Equipment Modifications ················································································6 3.3 Submitted Documents ····················································································6 4. MEASUREMENT CONDITIONS ···········································································7 4.1 Description of test configuration ····································································7 4.2 List of Peripherals ··························································································7 4.3 Uncertainty ·····································································································7 5. TEST AND MEASUREMENTS ·············································································8 5.1 ANTENNA REQUIREMENT ··········································································8 5.1.1 Regulation ·······························································································8 5.1.2 Result ······································································································8 5.2 MAXIMUM PEAK OUTPUT POWER ····························································9 5.2.1 Regulation ·······························································································9 5.2.2 Test Procedure ························································································9 5.2.3 Test Results ·····························································································9 Table 1: Measured values of the Maximum Peak Output Power (Conducted)·····9 Figure 1: Plot of the Maximum Peak Output Power (Conducted)······················10 5.3 CARRIER FREQUENCY SEPARATION ·····················································12 5.3.1 Regulation ·····························································································12 5.3.2 Test Procedure ······················································································12 5.3.3 Test Results ···························································································12 Table 2: Measured values of the Carrier Frequency Separation (Conducted) ···12 Figure 2: Plot of the Carrier Frequency Separation (Conducted) .....................13 5.4 20dB CHANNEL BANDWIDTH ··································································15 5.4.1 Regulation ·····························································································15 5.4.2 Test Procedure ······················································································15 5.4.3 Test Results ···························································································15 Table 3: Measured values of the 20dB Channel Bandwidth (Conducted)··········15 Figure 3: Plot of the 20dB Channel Bandwidth (Conducted) ···························16 5.5 NUMBER OF HOPPING CHANNELS ························································18 SK TECH CO., LTD. Page 3 of 42 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 5.5.1 Regulation ·····························································································18 5.5.2 Test Procedure ······················································································18 5.5.3 Test Results ···························································································18 Table 4: Measured values of the Number of Hopping Channels (Conducted)·····18 Figure 4: Plot of the Number of Hopping Channels (Conducted) ·…

Text truncated - open the document above for the full version.

SK TECH CO., LTD. Page 1 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 Test set up photos <Conducted RF power measurement> SK TECH CO., LTD. Page 2 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 <Radiated Emissions – Front View> <Radiated Emissions – Rear View> SK TECH CO., LTD. Page 3 of 3 SKT SKTTRT-050303-003 FCC ID: QOCPROMI-MSP102 <Conducted Emissions – Front View> <Conducted Emissions – Rear View>