QRF-G54DNT5234.9GHz WIRELESS NETWORK ADAPTER

TRANZEO TR-49 Revision: 2.0 Firmware: 5.02 Date: 16/11/09 Tranzeo TR-49 Series User Guide Covers the following models: TR-49-20, TR-49-N, TR-490, TR-49PLUS-24N iiiiii This document is intended for Public Distribution 19473 Fraser Way, Pitt Meadows, B.C. Canada V3Y 2V4 ii Document Revisions: Version 2.0 November 16, 2009 Tranzeo Wireless Technologies Inc. 19473 Fraser Way Pitt Meadows, BC Canada V3Y 2V4 Toll Free Number: 1.866.872.6936 Technical Support: 1.888.460.6366 General Inquiries: [email protected] Local Number: 1.604.460.6002 Sales: [email protected] Fax Number: 1.604.460.6005 Technical Support: [email protected] iiiiiiiii This document is intended for Public Distribution 19473 Fraser Way, Pitt Meadows, B.C. Canada V3Y 2V4 Safety Information iii TR-49 Series Tranzeo Wireless Technologies This equipment has been tested and found to comply with the limits for a digital device pursuant to part 90 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a Residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communication. Operation in the 4940-4990 MHz band is restricted to the U.S. Operation in this range is restricted to the Public safety bands. Use of these bands is restricted to entities that meet the requirements listed the FCC Part 90.20 Public Safety Pool and are properly licensed to operate a transmitter in the Public Safety band in accordance with Part 90Y of the technical rules can operate in the 4940-4990 MHz band. FCC regulations state in Part 90, operation in the 4.9-GHz band requires frequency coordination before the system can be operated. Operation of this equipment in residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. The user should not modify or change this equipment without written approval from Tranzeo Wireless. Modification could void authority to use this equipment. For the safety reasons, people should not work in a situation which RF Exposure limits be exceeded. To prevent the situation happening, people who work with the antenna should be aware of the following rules: • The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 131.1 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. • While installing the antenna, do not turn on power to the unit. • Do not connect the antenna while the device is in operation. • The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. • In order to ensure compliance with local regulations, the installer MUST enter the antenna gain at the time of installation. See Chapter 3: Wireless Settings, for details. FCC Compliance Safety Information Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Industry Canada Compliance iviviv This document is intended for Public Distribution 19473 Fraser Way, Pitt Meadows, B.C. Canada V3Y 2V4 Safety Information iv TR-49 Series Tranzeo Wireless Technologies You must read and understand the following safety instructions before installing the device: • This antenna’s grounding system must be installed according to Articles 810-15, 810-20, 810-21 of the National Electric Code, ANSI/NFPA No. 70-1993. If you have any questions or doubts about your antenna’s grounding system, contact a local licensed electrician. • Never attach the grounding wire while the device is powered. • If the ground is to be attached to an existing electrical circuit, turn off the circuit before attaching the wire. • Use the Tranzeo Power over Ethernet (POE) adapter only with approved Tranzeo models. • Never install radio equipment, surge suppressors or lightning protection during a storm. ! Safety Instructions Lightning Protection The key to lightning protection is to provide a harmless route for lightning to reach ground. The system should not be designed to attract lightning, nor can it repel lightning. National, state and local codes are designed to protect life, limb, and property, and must always be obeyed. When in doubt, consult local and national electrical codes or contact an electrician or professional trained in the design of grounding systems. The product requires professional installation. Professional installers ensure that the equipment is installed following local regulations and safety codes. Professional Installation Required vvv This document is intended for Public Distribution 19473 Fraser Way, Pitt Meadows, B.C. Canada V3Y 2V4 Table of Contents v TR-49 Series Tranzeo Wireless Technologies Chapter 1: Overview ........................................................................1-1 Introduction.................................................................................................. 1-1 Product Kit................................................................................................... 1-1 Product Description...................................................................................... 1-1 LED Panel Indicators............................................................................... 1-2 Chapter 2: Hardware Installation......................................................2-1 Getting Ready .............................................................................................. 2-1 Tools Required ........................................................................................ 2-1 Site Selection................................................................................…

Text truncated - open the document above for the full version.

Rev. 1/1/03 Tranzeo Wireless Technologies Inc. 19473 Fraser Way, BC, V3Y 1T7, Canada Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: QRF-G54DNT523. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Model: TR-49PLUS-24N List of confidential exhibits: “IP3K_SCH.pdf” “Parts List.pdf” “Internal Photos-G54DNT523.pdf” “Block diagram.pdf” The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Rev. 1/1/03 January 3, 2012 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Re: Marketing and Professional Installation Required FCC ID: QRF-G54DNT523 Marketing: The intended use is generally for industrial/commercial use and will not be sold to the general public. It will also not be sold through retail establishments or through mail order. It will be sold to OEM customers, qualified dealers and directly to commercial customers. Professional Installation: Since the equipment is used in the above reference FCC ID has standard RF connectors, the system must be professionally installed. The installer shall be responsible for ensuring that the proper antenna is employed so that the limits specified in Part 15.247 (b) are not exceeded. It is intended for industry/commercial use. All the necessary instructions keeping our qualified dealers, commercial customers and professional installers clear of the necessity of professional installation are given in the product user manual. Professional installers will ensure that the equipment is installed following local regulations and safety codes.

19473 Fraser Way, Pitt Meadows, Canada V3Y 2V4 Phone 604-460-6002 Fax: 604-460-6005 www.tranzeo.com Confidentiality and Mutual Non-Disclosure Agreement This confidentiality and Mutual Non-Disclosure Agreement (the “Agreement”) is effective as of the date of the first signature below, by and between Tranzeo Wireless Technologies, Inc.., a Canadian Corporation with offices located at 19473 Fraser Way, Pitt Meadows, BC, Canada V3Y 2V4. and ________________________________, a _______________________corporation, with offices located at _____________________________________________________ WHERAS, each party to this Agreement possesses confidential or proprietary information (as described in more detail as “Confidential Information”, below) related to certain technology and business activities; and WHEREAS, each party in possession of the Confidential Information (the “Disclosing Party”) desires to disclose some of its Confidential Information to the other party (the “Receiving Party”) subject to the terms and conditions of this Agreement; NOW THEREFORE, in consideration of the promises made herein, the receipt of certain Confidential Information, and other good and valuable consideration, the parties agree as follows: 1. “Confidential Information” as used in this Agreement shall mean any information or material which is proprietary to the Disclosing Party and is marked or otherwise clearly designated as “Confidential,” “Proprietary,” or with a similar legend. Without limiting the forgoing , the following shall be presumed to be Confidential Information, if disclosed: all computer programs and software (including, but not limited to, code, software output, screen displays, file hierarchies, graphics and user interfaces), related documentation, business outlooks, revenue, pricing, trade secrets, computer programs, and software formulas, data, inventions, techniques, product design, and strategies, as well as the fact and terms of discussions or negotiations between the parties. Confidential Information shall not include information that (i) is now or later becomes generally known or publicly available (other than as a result of a breach of this Agreement); (ii) is independently developed by the Receiving Party, as evidenced by records of the Receiving Party, (iii) the Receiving Party lawfully obtains from any third party who has lawfully obtained such information; (iv) has been published or generally disclosed or made available to the public by the Disclosing Party. The Receiving Party shall bear the burden of showing that any of the forgoing exclusions apply to any information or materials. 2. The Receiving Party shall handle, use, treat and utilize Confidential Information received from the disclosing Party in a manner consistent with the following: (a) It shall hold all such Confidential Information in strict confidence; (b) It shall use the Confidential Information only for the purpose of (i) evaluating the possibility of forming a joint business relationship or other commercial arrangement between the parties concerning the subject matter of such Confidential Information (ii) if and when such relationship is formed by a written agreement, furthering the purpose and intent expressly stated in such a written agreement; (c) It shall reproduce the Confidential Information only to the extent necessary for the purposes hereof; 19473 Fraser Way, Pitt Meadows, Canada V3Y 2V4 Phone 604-460-6002 Fax: 604-460-6005 www.tranzeo.com (d) It shall restrict disclosure of the Confidential Information to its employees with a need to know (and advise such employees of the obligations assumed herein); and (e) It shall not disclose such confidential information to any third party, including but not limited to, a parent, subsidiary or any other affiliate of the Receiving Party, or any manufacturer or independent contractor, without prior written approval of the Disclosing Party. In addition, with respect to any equipment, component, software or other items delivered by the Disclosing Party to the Receiving Party, the Receiving Party shall not reverse engineer, disassemble, decompile or otherwise analyze the physical construction, of any such items. Each Party agrees to attempt to limit its disclosure of information made to the other party to that information which is reasonably necessary to serve the limited purposes of the disclosure made. The party receiving Confidential Information from the other agrees to limit dissemination and disclosure of said information to those individuals, officers, agents and employees who reasonably have a need to know said information. 3. Each Party agrees that it shall not publish any review, notice or other report containing any of the other party’s Confidential Information prior to obtaining written permission from the Disclosing Party to disclose such Confidential Information in the manner contemplated. Upon publication after receipt of written permission, the published information shall cease to be treated as Confidential Information hereunder but only to the extent that it is actually disclosed. Without prior written consent, any review, notice or other report published by either party shall be limited to information, which is not Confidential Information. 4. Each party agrees to return to the Disclosing Party any and all materials comprising or containing Confidential Information, together with any copies that may have been made promptly upon the request of the Disclosing Party or, if not earlier requested, promptly after the purpose(s) for which they were furnished has been accomplished or abandoned (at least with respect to the receiving party). 5. This confidentiality and Mutual Non-Disclosure Agreement shall not be assignable by either party, and neither party may delegate its duties hereunder, without the prior written consent of the other party, which consent may be granted or denied in the sole discretion of the non-assigning part. All of the terms and provisions con…

Text truncated - open the document above for the full version.

January 17 th , 2012 To: Timco Engineering Inc. Reference: Authorization letter This letter authorizes Mr. Bud Patterson to sign an application form 731 to Timco Engineering Inc. in respect of all information details mentioned in this form to present confidential data on products manufactured by Tranzeo Wireless Technologies Inc.

19473 Fraser Way, Pitt Meadows, B.C. V3Y 2V4 T: 604.460.6002 F: 604-460.6005 Toll Free: 1-866-872-6936 Website: www.tranzeo.com January 20, 2012 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Phone (352)472-5500 or (888)472-2424 FAX (352)472-2030 Re: Restricted Access of Equipment and Documentation Notice FCC ID: QRF-G54DNT523 This Restricted Access of Equipment and Documentation Notice is to inform Timco Engineering, Inc. that access to equipment and related documentation supplied by Tranzeo Wireless Technologies Inc. is to be restricted to only authorized users by means to ensure the security of the equipment and confidentiality of related documentation at all times, and only designated professionals shall be allowed to maintain or service the equipment. Tranzeo Wireless Technologies Inc. is also requesting the internal photos be permanently confidential. This non-consumer device is inaccessible to the general public, and shall be kept in a secured and locked environment. This notice includes, but is not limited to: Confidential - Schematics “IP3K_SCH.pdf” Confidential - Parts List “Parts List.pdf” Confidential –Internal Photographs “Internal Photos-G54DNT523.pdf” Confidential –Block Diagram “Block diagram.pdf” 19473 Fraser Way, Pitt Meadows, B.C. V3Y 2V4 T: 604.460.6002 F: 604-460.6005 Toll Free: 1-866-872-6936 Website: www.tranzeo.com 19473 Fraser Way, Pitt Meadows, B.C. V3Y 2V4 T: 604.460.6002 F: 604-460.6005 Toll Free: 1-866-872-6936 Website: www.tranzeo.com January 3, 2012 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA Re: Marketing and Professional Installation Required FCC ID: QRF-G54DNT523 Marketing: The intended use is generally for industrial/commercial use and will not be sold to the general public. It will also not be sold through retail establishments or through mail order. It will be sold to OEM customers, qualified dealers and directly to commercial customers. Professional Installation: Since the equipment is used in the above reference FCC ID has standard RF connectors, the system must be professionally installed. The installer shall be responsible for ensuring that the proper antenna is employed so that the limits specified in Part 15.247 (b) are not exceeded. It is intended for industry/commercial use. All the necessary instructions keeping our qualified dealers, commercial customers and professional installers clear of the necessity of professional installation are given in the product user manual. Professional installers will ensure that the equipment is installed following local regulations and safety codes.

External Photos FCCID: QRF-G54DNT523 4.9 GHz Wireless Network Adapter Tranzeo Wireless Technologies Inc. Date: 17 January, 2012 Report No.: 020110.1 Labs: 19473 Fraser Way, Pitt Meadows, BC, Canada V3Y 2V4 Andrew Marles EMC Manager Andrei Moldavanov EMC Engineer A.1 External Photos

Work Instruction Sheet Tranzeo Wireless Technologies Inc. 19473 Fraser Way, Pitt Meadows, BC, Canada V3Y 2V4 Document Name: Product Labels Document No. TRQC-11. 26.2008b Note: This instruction sheet, that is dated 1/ 30/2012, supersedes all other versions. Version (Date) 1/30/2012. ECR; QRF-G54DNT523_Label sample Page 1 of 1 UNIT LABEL

EMC LABS INC Label Location FCC ID: QRF- G54DNT523 4.9 GHz Wireless Network Adapter Tranzeo Wireless Technologies Inc. Date: January 17, 2012 Report No.: 020110.1 Labs: 19473 Fraser Way, Pitt Meadows, BC, Canada V3Y 2V4 Andrew Marles EMC Manager Andrei Moldavanov EMC Engineer Supplemental Exhibit Tranzeo EMC Labs Inc. Page 2 of 2 A.1 Label Location Photo

EMC LABS INC Operational Description FCCID: QRF- G54DNT523 4.9 GHz Wireless Network Adapter Tranzeo Wireless Technologies Inc. Date: 17 January, 2010 Report No.: 020110.1 Labs: 19473 Fraser Way, Pitt Meadows, BC, Canada V3Y 2V4 Andrew Marles EMC Manager Andrei Moldavanov EMC Engineer Supplemental Exhibit Tranzeo EMC Labs Inc. Page 2 of 2 Operational Description The device is a wireless network designed specifically for wireless networks. The device has an 802.11a radio, as well as a standard type N antenna connector. The transceivers operate in the frequency band 4940-4990 MHz. The device transmits digital network data. The unit is mounted in fixed point-to-multi point installations. The type of RF modulation is OFDM. The device can transmit data at a bit rate of 54 Mbps in OFDM mode or a real-world data rate of approximately 28.0 Mbps. A radio for secure communications uses WEP/WPA/WPA2 (PSK w/TKIP, EAP-TLS, EAP-PEAP TLS, EAP- PEAP MSChap/v2, EAP-TTLS) algorithms. The firmware used with the device prevents the use of channels outside the specified frequency bands. The product is used in a professionally installed, fixed point-to-point or point-to-multipoint environment.

19473 Fraser way, Pitt Meadows, BC, Canada V3Y 2V4 T: 604.460.6002 F: 604.460.6005 Toll Free: 1.866.872.6936 www.tranzeo.com 26 January 2012 To Whom It May Concern: Re: Tune Up Procedure – TR-49PLUS-24N This letter is to inform you that the TR-49PLUS-24N product family marketed by Tranzeo Wireless Technologies does not require a tune up procedure in order to ensure compliant operation in it’s final installation. All products are tuned and calibrated at the factory, and there are no user serviceable parts or software options that could affect the operating frequency or output power of the device. As an 802.11a compliant device, the TR-49PLUS-24N automatically locks on to a valid base-station, and will only transmit when authorized. For these reasons, no tune-up procedure is included with this submission for FCC certification. The maximum output power that the device is set to during the manufacturing process is 20 dBm and the power tolerance is +/- 2 dB. Sincerely, Andrew Marles, EMC Manager Tranzeo Wireless Technologies 19473 Fraser Way Pitt Meadows, BC V3Y 2V4

EMC Report: QRF-RAEKT2KN2 RF Exposure Evaluation Tranzeo EMC Labs Page 31 of 34 10.0 RF Exposure Evaluation 10.1 Test Standard FCC CFR47, Part 1, 1307 (b), 1310 FCC CFR47, Part 2, Subpart J 1091 FCC CFR47, Part 90, Subpart Y 90.1217 FCC 1.1310 states the criteria listed in the table below shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in Section 1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of Section 2.1093 of this chapter. Further information on evaluating compliance with these limits can be found in the FCC's OST/OET Bulletin Number 65, “Evaluating Compliance with FCC-Specified Guidelines for Human Exposure to Radiofrequency Radiation”. Frequency Range (MHZ) Electric Field Strength (V/m) Magnetic Field Strength (A/M) Power Density (mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 10.2 EUT Operating Condition The maximum antenna gain is 32 dBi at 4.9 GHz. 10.3 RF exposure evaluation distance calculation 4.9 GHz radio with 32 dBi antenna Freq (MHz) Output Power to Antenna (dBm) Antenna Gain (dBi) r (cm) 4950 20.01 32 131.1 4965 19.55 32 110.4 4980 10.99 32 122.6 As shown above, the minimum distance where the MPE limit is reached is 131.1 cm for the EUT.

EMC LABS INC EMC Test Report FCCID: QRF-G54DNT523 IC: 5181A-G54DNT523 4.9 GHz Wireless Network Adapter Tranzeo Wireless Technologies Inc. Testing body: Tranzeo EMC Labs Inc. 19473 Fraser Way, Pitt Meadows, BC, Canada V3Y 2V4 Client: Tranzeo Wireless Technologies Inc. 19473 Fraser Way, Pitt Meadows, BC, Canada V3Y 2V4 EMC Report: QRF-RAEKT2KN2 Table of Contents Tranzeo EMC Labs Page 2 of 34 The test results indicated in this report refer exclusively to the equipment under test specified below. It is not permitted to transfer the results to other systems or configurations. Order number: 104 Type of test: Testing of electromagnetic disturbances characteristics Date the EUT was received: December 2 nd , 2011 Date of test: December 5 th , 2011 to December 30 th , 2011 Report No.: 011611.1 Pitt Meadows, 16 January, 2012 EMC Manager: Andrew Marles EMC Engineer: Andrei Moldavanov EMC Report: QRF-RAEKT2KN2 Table of Contents Tranzeo EMC Labs Page 3 of 34 Revision History EMC Report: QRF-RAEKT2KN2 Table of Contents Tranzeo EMC Labs Page 4 of 34 Table of Contents 1.0 GENERAL INFORMATION............................................................................................................ 6 1.1 EUT Description......................................................................................................................... 6 1.2 Operational Description ............................................................................................................. 7 1.3 EUT Testing Configuration ......................................................................................................... 7 1.4 EUT Modifications ..................................................................................................................... 7 1.5 Test Facilities ............................................................................................................................. 8 1.6 Test Equipment ........................................................................................................................... 8 1.7 Test System Details ..................................................................................................................... 8 1.8 Test Results ................................................................................................................................ 8 2.0 PEAK POWER OUTPUT ................................................................................................................. 9 2.1 Test Standard ............................................................................................................................. 9 2.2 Test Limits.................................................................................................................................. 9 2.3 Test Setup ................................................................................................................................... 9 2.3.1 Test Setup Block Diagram..........................................................................................................10 2.4 Test Results ...............................................................................................................................10 3.0 SPURIOUS EMISSIONS AT ANTENNA TERMINALS................................................................11 3.1 Test Standard ............................................................................................................................11 3.2 Test Setup ..................................................................................................................................11 3.2.1 Test Setup Block Diagram..........................................................................................................11 4.0 FIELD STRENGTH OF SPURIOUS RADIATION........................................................................13 4.1 Test Standard ............................................................................................................................13 4.2 Test Setup – Spurious Emissions ................................................................................................13 4.2.1 Test Setup Block Diagram – Radiated Measurements (Spurious) ................................................13 4.3 Test Results ...............................................................................................................................14 5.0 BAND EDGE ....................................................................................................................................15 5.1 Test Standard ............................................................................................................................15 5.2 Test Limits.................................................................................................................................15 5.3 Test Setup ..................................................................................................................................15 5.3.1 Test Setup Block Diagram – Conducted Measurements...............................................................16 5.3.2 Test Setup Block Diagram – Radiated Measurements .................................................................16 5.4 Test Results ...............................................................................................................................17 5.4.1 Conducted Measurements ..........................................................................................................17 6.0 OCCUPIED BANDWIDTH .............................................................................................................20 6.1 Test Standard ............................................................................................................................20 6.2 Test Limits.................................................................................................................................20 6.3 Test Setup ......................…

Text truncated - open the document above for the full version.

EMC LABS INC Test Setup Photos FCCID: QRF- G54DNT523 4.9 GHz Wireless Network Adapter Tranzeo Wireless Technologies Inc. Date: January 17 03, 2012 Report No.: 020110.1 Labs: 19473 Fraser Way, Pitt Meadows, BC, Canada V3Y 2V4 Andrew Marles EMC Manager Andrei Moldavanov EMC Engineer Supplemental Exhibit Tranzeo EMC Labs Inc. Page 2 of 3 A.1 Test Setup Photos Radiated emissions setup Supplemental Exhibit Tranzeo EMC Labs Inc. Page 3 of 3 Conducted emissions setup