QS6-GWD910RWireless Microphone

GWD910 Waterproof Wireless Microphone System GWD-910T & GWD-910R Owner’s Manual Taiwan Gomet Technology Co., Ltd. No. 8-1, Lane 212, Sec. 1, Chang-Shang N. Rd, Tamsui, Taipei Shien 25157, Taiwan Tel: +886-2-2621-8029 Fax: +886-2-2623-7605 E-mail [email protected] Website www.gomet.com.tw GWD 900 Wireless Microphone Owner’s Manual 2 Wireless Microphone General Specification THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE CONDITION THAT THIS DEVICE DOES NOT CAUSE HARMFUL INTERFERENCE. ( FCC ID :QS6-GWD910T & QS6-GWD910R ) Modulation Mode: Bi-Directional D SS (Digital Spread Spectrum) Frequency: 902 ~ 92 5 MHz Handset RF Power Output 21.69 dBm / GWD-910T Base Station RF Power Output 20.14 dBm / GWD-910R Operating Range: 1000 ft.(300M) Battery: 3.7V Rechargeable Li-Ion battery (Handset) 5V DC (Base Station) Air Time: 9~10 hours of continuous operation Standby Time: 4 days Microphone: Internal microphone without lavalier Channels: 8 Channels with Automatic Synchronization • This GWD910 is protected agai nst water splashes and dust. • GWD910 Wireless Microphone will automatically turns ON and shut OFF when recording is activated or deacti vated through In-Car Video System. • GWD910 Wireless Microphone is also able to trigger IN-CAR VIDEO SYSTEM to activate digital video recording. • Any GWD910 Wireless Microphone will work with any IN-CAR VIDEO SYSTEM that is equipped with GWD910 receiv ers. - Automatic Synchronization • Build-in Programmable Function Button, Panic Button & Mute Button • LED indicators are used for status on mute, ON/OFF, signal, battery and panic functions. • GWD910 will automatically detect radio fr equency noises, channel conflicts and cross talks with as many as 20 units in close pr oximity, and perform auto switch to ensure clear communication and recording. GWD 900 Wireless Microphone Owner’s Manual 3 Hardware Overview Wireless Microphone Wireless Microphone Receiver GWD910T (-2400T) GWD910R (-2400R) Charger, AC Wall Charger Cable & DC In-Car Charger Cable GWD 900 Wireless Microphone Owner’s Manual 4 System Overview Wireless Microphone Receiver Receiver’s Register Contact (CH1) The register contact is used to synchroni ze the frequency of the receiver and the wireless microphone. Green LED Green LED OFF for Microphone on Standby Mode Green LED ON for Microphone on Recording Mode Red LED Red LED OFF for Panic Mode OFF Red LED ON for Panic Mode ON Red LED Blinking for Wireless Microphone Low Battery Yellow LED Yellow LED OFF for Strong Signal Yellow LED ON for Signal is Marginal or Weak 1 M PS 1 S P M GWD 900 Wireless Microphone Owner’s Manual 5 System Overview Wireless Microphone Receiver SCMIC-PKC/GWD910R Installation No installation is required from the user. The GWD910 wireless microphone receiver is located in the touch screen monitor module of the IN-CAR VIDEO SYSTEM. Power Connection The wireless microphone receiver has no ON / OFF switch. The receiver will become energized in standby mode whenever the IN-CAR VIDEO SYSTEM system is ON. Receiver’s Antennas To prevent damage, antenna for the receiver is package separately. Remove the antenna from the package and tighten the titanium antenna to the receiver. Do not try to lengthen, shorten, or temper with the antennas, which might result in damage of the audio system and may violate FCC regulation. Receiver’s Register Contact The register contact is used to synchronize the frequency of the receiver and the wireless microphone. GWD 900 Wireless Microphone Owner’s Manual 6 System Overview Wireless Microphone /GWD910T LED Indicators (Within the REC & Button 1 & 2) REC Button Green / Blue LED OFF for Standby Mode Green / Blue LED ON for Recording Mode Green / Blue LED Fast Blink for Mute Recording Red LED Slow Blink for Low Battery Red LED ON for Panic Mode ON Red LED OFF for Panic Mode OFF Programmable Button 1 Blue LED ON for Programmable 1 Function ON Yellow LED OFF for Strong Signal Yellow LED ON for Signal is Marginal or Weak Programmable Button 2 Green LED ON for Programmable 2 Function ON REC Button: Audio / Video Recording ON (Press REC Button once) This action will initiate the IN-CAR VIDEO SYSTEM to record both audio and video data. To stop recording, press the stop button on the IN-CAR VIDEO SYSTEM monitor module. Panic ON (Press and hold REC Button for 3 second) Wireless microphone will automatically send a panic signal to the IN-CAR VIDEO SYSTEM ; the signal will be relayed back to the station for process. (This function is only available if the wireless communication is established) The Panic Mode may be deactivated by holding down the REC button for another 3 seconds. Buzzer Produce Warning Tone PB 1: Programmable Button 1 PB 2: Programmable Button 2 Microphone Audio Input. Antenna External Antenna base for long distance used. REC+PB1 Hold both Button 3 Seconds for Covert Mode: Switching Warning Features between Vibration and (LED + Buzzer + Vibration ) 12 6 4 3 4 2 5 1 6 3 5 GWD 900 Wireless Microphone Owner’s Manual 7 System Overview Wireless Microphone SCMIC-TRAN2/GWD910T Battery Selection and Installation The GWD910 wireless microphone is powered by a rechargeable lithium-ion battery. The wireless microphone housing is designed to prevent incorrect installation of the battery. Do not force the battery in to the housing. Reversed batteries may cause damage to the wireless microphone. The battery compartment is located at the bottom of the wireless microphone. Slide off the battery cover and remove the silicon seal, at this point the battery is free to slide out. Transmitting Antenna The GWD910 Wireless Microphone includes a flexible antenna, which is package separately to prevent damage. Remove the antenna from the package and tighten the antenna to the wireless microphone. For best result, allow the antenna to extent fully. If the signal is marginal, please experiment with different wireless microphone position on your body. Do not attempt to remove, replace or change the…

Text truncated - open the document above for the full version.

Report No: T100622103 Page 1 / 8 EXTERNAL PHOTOGRAPHS OF EUT Report No: T10062103 Page 2 Report No: T10062103 Page 3 Report No: T10062103 Page 4

Label Location & Foramat Label Here FCC ID: QS6-GWD910R Note: conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Report No: T10062103 Page 5 INTERNAL PHOTOGRAPHS OF EUT Report No: T10062103 Page 6 Report No: T10062103 Page 7 Report No: T10062103 Page 8

Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: Oct. 6, 2010 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 58 Rev. 00 FCC 47 CFR PART 15 SUBPART C TEST REPORT For Wireless Microphone Model: GWD910R Trade Name: GOMET Issued to Taiwan Gomet Technology Co., Ltd. No. 8-1, Lane 212, Sec. 1, Chung-Shan N. Road Tamsui, Taipei, Taiwan 251 Issued by Compliance Certification Services Inc. No. 81-1, Lane 210, Pa-De 2nd Rd., Luchu Hsiang, Taoyuan Shien, (338) Taiwan, R.O.C. TEL: 886-3-324-0332 FAX: 886-3-324-5235 http://www.ccsrf.com [email protected] Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: Oct. 6, 2010 Page 2 Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 Sep. 10, 2010 Initial Issue ALL Jill Shiau Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: Oct. 6, 2010 Page 3 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION .............................................................................. 4 2. EUT DESCRIPTION................................................................................................... 5 3. TEST METHODOLOGY............................................................................................. 6 3.1 EUT CONFIGURATION ........................................................................................ 6 3.2 EUT EXERCISE .................................................................................................... 6 3.3 GENERAL TEST PROCEDURES ......................................................................... 6 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ............................. 7 3.5 DESCRIPTION OF TEST MODES........................................................................ 7 4. INSTRUMENT CALIBRATION .................................................................................. 8 4.1 MEASURING INSTRUMENT CALIBRATION ....................................................... 8 4.2 MEASUREMENT EQUIPMENT USED ................................................................. 8 4.3 MEASUREMENT UNCERTAINTY ........................................................................ 9 5. FACILITIES AND ACCREDITATIONS .................................................................... 10 5.1 FACILTIES .......................................................................................................... 10 5.2 EQUIPMENT ....................................................................................................... 10 5.3 TABLE OF ACCREDITATIONS AND LISTINGS................................................. 11 6. SETUP OF EQUIPMENT UNDER TEST ................................................................. 12 6.1 SETUP CONFIGURATION OF EUT ................................................................... 12 6.2 SUPPORT EQUIPMENT..................................................................................... 12 7. FCC PART 15.247 REQUIREMENTS ..................................................................... 13 7.1 6 DB BANDWIDTH ............................................................................................... 13 7.2 PEAK POWER .................................................................................................... 16 7.3 AVERAGE POWER ............................................................................................ 19 7.4 BAND EDGES MEASUREMENT........................................................................ 22 7.5 PEAK POWER SPECTRAL DENSITY ................................................................ 24 7.6 SPURIOUS EMISSIONS..................................................................................... 27 7.7 POWERLINE CONDUCTED EMISSIONS .......................................................... 48 8. APPENDIX I RADIO FREQUENCY EXPOSURE .................................................... 51 9. APPENDIX II PHOTOGRAPHS OF TEST SETUP .................................................. 53 Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: Oct. 6, 2010 Page 4 Rev. 00 1. TEST RESULT CERTIFICATION Applicant: Taiwan Gomet Technology Co., Ltd. No. 8-1, Lane 212, Sec. 1, Chung-Shan N. Road Tamsui, Taipei, Taiwan 251 Manufacturer: Taiwan Gomet Technology Co., Ltd. No. 8-1, Lane 212, Sec. 1, Chung-Shan N. Road Tamsui, Taipei, Taiwan 251 Equipment Under Test: Wireless Microphone Trade Name: GOMET Model: GWD910R Date of Test: August 10 ~ Oct. 6, 2010 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by: Reviewed by: Stan Lin Supervisor Alonso Lu Engineer Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: Oct. 6, 2010 Page 5 Rev. 00 2. EUT DESCRIPTION Product Wireless Microphone Trade Name GOMET Model Number GWD910R Model Discrepancy N/A EUT Power Rating 3.6V, 1300mA Power Adapter N/A Model MW35-1200300 Power Adapter Power Rating I/P: 1200vac, 60Hz, 7W O/P: 12VDC, 300mA Operating Frequency Range 904~925MHz Transmit Power 20.14dBm (0.10328W) (Peak) 14.11dBm (0.02576W) (Ave…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: August 20, 2010 Page 47 Rev. 00 9. APPENDIX II PHOTOGRAPHS OF TEST SETUP Radiated Emission Set up Photos Below 1GHz Dipole Antenna Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: August 20, 2010 Page 48 Rev. 00 Monopole Antenna Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: August 20, 2010 Page 49 Rev. 00 Above 1GHz Dipole Antenna Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: August 20, 2010 Page 50 Rev. 00 Monopole Antenna Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: August 20, 2010 Page 51 Rev. 00 Conducted Emission Setup Photos Compliance Certification Services Inc. Report No.: T100622103-RP2 FCC ID: QS6-GWD910R Date of Issue: August 20, 2010 Page 52 Rev. 00 Powerline Conducted Emissions Setup Photos