QSS-MCBASIC400RFID Tag Coder

Manual Coder MC BASIC 400 Manual and operational description Coder MC BASIC 400 Page 2 © SKIDATA AG, April 2004 SKIDATA AG Technical Documentation Untersbergstrasse 40 A-5083 Gartenau Telephone +43 6246 888 - 0 Telefax +43 6246 888 - 7 Internet http://www.skidata.com e-mail [email protected] Copyright © 2004 by SKIDATA AG. All rights reserved. All information in the following document is protected by copyright law. No part of this document may be reproduced without the written consent of SKI- DATA AG. SKIDATA AG reserves the right to make any changes of specification and other information in this document without further notice. Please note During the compilation of this Technical Documentation, great care has been taken to ensure the accuracy of the information contained in it. However, despite our constant effort to ensure the highest degree of accuracy and comprehensiveness possible, the information provided cannot be guaranteed to be absolutely error-free. Trademarks This documentation may contain representations of registered product or service trademarks owned by SKIDATA AG or third parties, as well as references to proprietary know-how protected by copyright laws or other legal provisions. In any case the intel- lectual property rights remain exclusively with their respective owners. Declaration of Conformity The Coder MC BASIC 400 has been developed, designed and manufactured in accordance with the following EU directive: R&TTE (99/5/EC) 0408 Version April 2004 Coder MC BASIC 400 Manual and operational description © SKIDATA AG, April 2004 Page 3 FCC 15.19: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause un- desired operation. FCC 15.21: IMPORTANT: Any changes to or modifications of Coder MC BA- SIC 400 (all variants) unless expressly approved by SKIDATA™, may void the user's authority to operate this device. Manual and operational description Coder MC BASIC 400 Page 4 © SKIDATA AG, April 2004 Coder MC BASIC 400 1 Document Management – Version Table Tab. 1: Document Version Table for Installation & Maintenance Instructions Section Document Pages Version Date 1 Coder MC BASIC 400 4 1.0 2004-04-06 Coder MC BASIC 400 1 1 Coder MC BASIC 400 Version 1.0 4 pages Copyright 2004 by SKIDATA AG 1 Coder MC BASIC 400 1.1 Contents Page 2 © SKIDATA AG, Version 1.0 1.1 Contents 1.1 Contents 2 1.2 Electrical connections of the device 3 Coder MC BASIC 400 1 Electrical connections of the device 1.2 © SKIDATA AG, Version 1.0 Page 3 1.2 Electrical connections of the device Fig. 1: Connections Coder MC BASIC 400 Fig. 2: Coder MC BASIC 400 1 Coder MC BASIC 400 1.2 Electrical connections of the device Page 4 © SKIDATA AG, Version 1.0

Coverletter: SKIDATA AG wants to get FCC-Certification for the following product: Coder “MC BASIC 400”. The unit will get the following FCC-ID: QSS-MCBASIC400 List of documents: Exhibit Thema File Exhibit 01 Label and placement Type label MC BASIC 400.pdf MC BASIC 400 label placement 1.jpg MC BASIC 400 label placement 2.jpg Exhibit 02 Not needed -------------------- Exhibit 03 External Photos Extern_04-137.pdf * Exhibit 04 Block Diagrams Block Diagram MC BASIC 400.pdf Block Diagram sd605.pdf * Exhibit 05 Schematic Diagrams sd582_4.pdf sd605_4.pdf sd611_1.pdf sd626_1.pdf sd627_1.pdf sd628_2.pdf Exhibit 06 Testreport 04-137.pdf Exhibit 07 Test Set-up Photos Setup_04-137.pdf Exhibit 08 User Manual Manual Coder MC BASIC 400.pdf Exhibit 09 Internal Photos Intern_04-137.pdf Exhibit 10 Not needed -------------------- Exhibit 11 Not needed -------------------- Exhibit 12 Operational Description Fact sheet MC BASIC 400.pdf Exhibit 13 Cover letter Request for confidentiality This file Confidentiality MC BASIC 400.pdf For the Exhibits marked with ‘*’ SKIDATA AG requested Confidentiality according to 47 CFR 0.457 and 0.459 of the FCC rules because these are sensitive parts owned by this company and include much of Know-How or sensitive data, it will not be provided to the public. The labelling on some photos is not the actual status. The correct labelling you can in Exhibit 1.

Fa. SKIDATA AG Untersbergstrasse 40 A-5183 Gartenau / Salzburg Austria, Europe Tel.: +43 6246 888-0 Fax: +43 6246 888-7 Gartenau, 2004-05-14 TÜV Österreich (TUEV Austria) Deutschstrasse 10 A-1230 Wien Austria, Europe Tel.: +43 1 61091-0 Request for CONFIDENTIALITY Pursuant to 47 CFR 0.457(d) of the FCC Rules, we have request for confidentiality of the following parts of our documentation regarding the Coder “MC BASIC 400” (FCC-ID: QSS-MCBASIC400): • Schematic Diagrams: - sd582_4.pdf - sd605_4.pdf - sd611_1.pdf - sd626_1.pdf - sd627_1.pdf - sd628_2.pdf • Block Diagrams: - Block Diagram MC BASIC 400.pdf - Block Diagram sd605.pdf This information is owned by our company and put into public is prohibited. We further certify that the applicant nor any party to the application subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C Section 862. Christoph Sonderegger Standard Compliance Coordinator SKIDATA AG

:-) SKIDATA AG • Untersbergstraße 40 • A-5083 Gartenau [t] +43 (0) 62 46/8 88-0 • [f] +43 (0) 62 46/8 88-7 • [e] [email protected] • [w] www.skidata.com Version 1.0 • 19.05.2004 • Copyright © 2004 by SKIDATA AG This documentation may contain representations of registered product or service trademarks owned by SKIDATA AG or third parties, as well as references to proprietary know-how protected by copyright laws or other legal provisions. In any case the intellectual property rights remain exclusively with their respective owners. This document is subject to change without notice. It cannot form part of a binding contract. Picture may vary from actual product MC BASIC 400Page 1/2 System Device The MC BASIC 400 is designed for issuing receipts and labeling barcode tickets by thermal direct printing. Contactless data carriers (keycards) are processed by way of a built-in contactless antenna. Fanfold ticket stock is drawn in automatically through a supply slot at the rear for printing. The issuing speed per ticket is approx. 2 seconds. Tickets are read through a front-mounted insert slot. Features •Insert-type ticket reader and barcode scanner for reading barcode-based data carriers in one orientation •Integrated thermal ticket and/or receipt printer •Tickets, receipts and invoices are printed on fanfold stock by thermal direct printing •Automated feed and cutter for fanfold stock •Transport mechanism for withdrawal of invalid or invalidated tickets •2 barcode scanners for reading barcode scanners in any of two orientations •Contactless scanner for reading contactless 125-kHz and 13 MHz keycards; integrated in front panel of device such as the Parking Column •Insert-type reader for mag stripe cards and/or smartcards •Motorised reader for mag stripe cards and smartcards •Manufactored in accordance with ISO 9001 standards 192 290 200 193 210 76 157 267 Coding unit Technical Specifications Supported data carriers ...........SKIDATA™ TK400 Ticket format ............................ISO-compliant; 54 mm x 86 mm Ticket issuing speed................ up to 700 tickets/hour Dimensions in mm................... 290 mm x 200 mm x 210 mm Weight ...................................... 4,1 kg Operating temperature............. 10 °C – 40 °C, ambient Power supply........................... 24 VDC Power consumption................. 100 W Interface ...................................RS 485 (Arcnet protocol); 9-pin D-Sub connector Standard compliance............... R&TTE Directive 1999/5/EC Carrier frequency for processing of contactless media.................... 122,88 kHz; 13,56 MHz MC BASIC 400Page 2/2 System Device