QSS-SD605Radio Transceiver Module

Manual sd605 Manual sd605 Page 2 © SKIDATA AG, July 2005 SKIDATA AG Technical Documentation Untersbergstrasse 40 A-5083 Grödig/Salzburg Telephone +43 6246 888-0 Telefax +43 6246 888-7 Internet http://www.skidata.com e-mail [email protected] Copyright © 2005 by SKIDATA AG. All rights reserved. All information in the following document is protected by copyright law. No part of this document may be reproduced without the written consent of SKI- DATA AG. SKIDATA AG reserves the right to make any changes of specification and other information in this document without further notice. Please note During the compilation of this Technical Documentation, great care has been taken to ensure the accuracy of the information contained in it. However, despite our constant effort to ensure the highest degree of accuracy and comprehensiveness possible, the information provided cannot be guaranteed to be absolutely error-free. Trademarks This documentation may contain representations of registered product or service trademarks owned by SKIDATA AG or third parties, as well as references to proprietary know-how protected by copyright laws or other legal provisions. In any case the intel- lectual property rights remain exclusively with their respective owners. Declaration of Conformity The sd605 has been developed, designed and manufactured in accordance with the following EU directive: R&TTE (1999/5/EC) 0408 Version July 2005 Sd605 Manual © SKIDATA AG, July 2005 Page 3 FCC 15.21: IMPORTANT: Any changes to or modifications of the sd605, in- cluding antenna, unless expressly approved by SKIDATA™, may void the user's authority to operate this device. Document Management – Version Table Tab. 1: Document Version Table for Installation & Maintenance Instructions Section Document Pages Version Date 1 sd605 4 1.1 2005-07-28 IMPORTANT: Any changes to or modifications of the sd605, in- cluding antenna, unless expressly approved by SKIDATA™, may void the user's authority to operate this device. Manual sd605 Page 4 © SKIDATA AG, July 2005 sd605 1 1 sd605 Version 1.1 4 pages Copyright 2005 by SKIDATA AG 1 sd605 1.1 Contents Page 2 © SKIDATA AG, Version 1.1 1.1 Contents 1.1 Contents 2 1.2 General 3 1.3 sd605 4 1.3.1 front view 4 1.3.2 rear view 4 sd605 1 General 1.2 © SKIDATA AG, Version 1.1 Page 3 1.2 General The sd605 is a Radio Transceiver Module (RFID module) which is designed for installation in SKIDATA devices by SKIDATA AG only. The module is not to be sold as an individual product. The sd605 must be connected to the appropriate devices by means of the plug-in connector provided for this purpose. The il- lustrations show the plug-in boards for 5 V DC power supply and the data transfer line, as well as the plug-in parts for the antennas. It is prohibited to use antennas other as the antennas certified to be used with the sd605. 1 sd605 1.3 sd605 Page 4 © SKIDATA AG, Version 1.1 1.3 sd605 1.3.1 front view 1.3.2 rear view Fig. 1: front view sd605 13 Mhz Ant2 13 Mhz Ant1 125 kHz Ant1 P ower / RS232 125 kHz Ant2 Fig. 2: rear view sd605 Power / RS232 (0 V / 5 V)

SKIDATA AG Christoph Sonderegger Untersbergstraße 40 A-5083 Grödig PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg To Whom It May Concern: Please be advised that SKIDATA AG authorizes Senton GmbH to act on our behalf, until otherwise notified, for applications submitted to PHOENIX TEST-LAB GmbH (PTL). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Date: 2005-10-27 ______________________________________ Signatory Christoph Sonderegger Standard Compliance Coordinator SKIDATA AG ______________________________________ Name printed

SKIDATA AG Christoph Sonderegger Untersbergstraße 40 A-5083 Grödig Request for Confidentiality in accordance with 47 CFR 0.459 Date: 25 October 2005 PHOENIX TEST-LAB GmbH Königswinkel 10 D32825 Blomberg Germany RE: Certification Application FCC ID: QSS-SD605 Please be advised that the following information is to be held confidential on behalf of SKIDATA AG: • Schematic Diagrams • Part Lists • Block Diagram • Operational Description The application contains technical information which SKIDATA AG deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Christoph Sonderegger Standard Compliance Coordinator SKIDATA AG

EMV-Pr ̧fzentrum EMI/EMC-Testcenter Coordinates: ƒussere Fr ̧hlingstrasse 45 ! D-94315 Straubing Telefon (0 94 21) 55 22-0 Telefax (0 94 21) 55 22-99 [email protected] ! http://www.senton.de Senton GmbH ! ƒussere Fr ̧hlingstrasse 45 ! D-94315 Straubing PHOENIX TEST-LAB GmbH Koenigswinkel 10 D-32825 Blomberg Germany 10 October 2005 In reference to FCC ID QSS-SD605 Justification for Part 15 Unlicensed Modular Transmitter Approval according to DA 00-1407 1. Own RF Shielding Not complied, but subject to limited modular approval. The Grantee can demonstrate that it will retain control over the final installation of the device, such that compliance of the end product is assured. In such a case, an operating condition on the grant of equipment authorization for the module would state that the module is only approved for use when installed in devices produced by a specific manufacturer, typically the Grantee. 2. Buffered Modulation inputs Complied, no direct modulation input. Modulated signals will be buffered by microcontroller IC12 3. Own power supply regulation Complied, voltage regulated power supply on board, see schematic diagram 4. Antenna requirements Complied, unique antenna coupler employed 5. Test in stand-alone configuration Complied, see test report for details. Cable lengths typical to actual use. 6. Own FCC ID Complied, the exterior label will be ÑContains FCC ID QSS-SD605ì Subject to limited modular approval 7. The Modular Transmitter must comply with any specific rule and the manufacturer must provide adequate instructions The EUT is compliant with all applicable FCC rules. Detail instructions are given in the User guide. 8. RF Exposure requirements Not applicable since the unit operates under section 15.225 of the FCC rules. The reference guide contains general installation and operation instructions. MPE evaluation not required Johann Roidt Senton GmbH

sd611 sd611 sd611 sd612 sd612 sd648 sd648 sd647 sd647 sd647

1 sd605 1.3 sd605 Page 4 © SKIDATA AG, Version 1.1 1.3 sd605 1.3.1 front view 1.3.2 rear view Fig. 1: front view sd605 13 Mhz Ant2 13 Mhz Ant1 125 kHz Ant1 P ower / RS232 125 kHz Ant2 Fig. 2: rear view sd605 Power / RS232 (0 V / 5 V)

FCC ID QSS-SD605

1 sd605 1.3 sd605 Page 4 © SKIDATA AG, Version 1.1 1.3 sd605 1.3.1 front view 1.3.2 rear view Fig. 1: front view sd605 13 Mhz Ant2 13 Mhz Ant1 125 kHz Ant1 P ower / RS232 125 kHz Ant2 Fig. 2: rear view sd605 Power / RS232 (0 V / 5 V)

Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Note: The test data of this report is related only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. Test Report No. 55426-050412 (Edition 2) Page 1 of 65 Pages Straubing, 20 September 2005 T E S T - R E P O R T No. 55426-050412 (Edition 2) for sd605 Inductive TAG Reader Module Applicant: SKIDATA AG Test Specifications: FCC Code of Federal Regulations, CFR 47, Part 15, Sections 15.205, 15.207, 15.215 and 15.225 Radio Standards Specification RSS-GEN, Sections 4.5, 7.2.2 and 7.2.4 and RSS-210 Issue 6, Sections 2.2, 2.7 and Annex 2.6 Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 2) Page 2 of 65 Pages Table of Contents 1 Description of the Equipment Under Test (EUT) ........................................................ 3 2 Administrative Data..................................................................................................... 4 3 Identification of the Test Laboratory ........................................................................... 5 4 Summary .................................................................................................................... 6 5 Operation Mode and Configuration of EUT................................................................. 7 6 Measurement Procedures........................................................................................... 8 6.1 Bandwidth Measurements .................................................................................... 8 6.2 Pulse Train Measurement .................................................................................... 9 6.3 Conducted AC Powerline Emission .................................................................... 10 6.4 Radiated Emission Measurement 9 kHz to 30 MHz ........................................... 12 6.5 Radiated Emission in Fully or Semi Anechoic Room.......................................... 14 6.6 Radiated Emission at Open Field Test Site........................................................ 16 6.7 Carrier Frequency Stability ................................................................................. 17 7 Photographs Taken During Testing .......................................................................... 19 8 Test Results .............................................................................................................. 31 8.1 Occupied Bandwidth........................................................................................... 33 8.2 Emission Bandwidth ........................................................................................... 38 8.3 Designation of Emissions ................................................................................... 43 8.4 Pulse Train Measurement .................................................................................. 44 8.5 Restricted Bands of Operation ........................................................................... 47 8.6 Conducted Powerline Emission Measurement 150 kHz to 30 MHz................... 48 8.7 Spectrum Mask................................................................................................... 49 8.8 Radiated Emission Measurement 9 kHz to 30 MHz .......................................... 51 8.9 Radiated Emission Measurement 30 MHz to 1 GHz ......................................... 56 8.10 Carrier Frequency Stability ................................................................................. 59 8.11 Exposure of Humans to RF Fields...................................................................... 62 9 Referenced Regulations ........................................................................................... 64 10 Charts taken during testing ....................................................................................... 65 Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 2) Page 3 of 65 Pages 1 Description of the Equipment Under Test (EUT) General data of EUT Type designation 1 : sd605 Parts 2 : and Serial number(s): sd605 (V4.2): D052000585 Antenna sd611 (V1.2): D044500823 Antenna sd612 (V1.2): D052500149 Antenna sd647 (V2.1): D051000069 Antenna sd648 (V1.1): D051000071 Manufacturer: SKIDATA AG Type of equipment: Inductive TAG Reader Module Version: As delivered FCC ID: QSS-SD605 Additional parts/accessories: Technical data of EUT Application frequency range: 119 - 127 kHz and 13.553 - 13.567 MHz Frequency range: 119 - 127 kHz and 13.553 - 13.567 MHz Operating frequency: 122 kHz and 13.56 MHz Type of modulation: ASK Pulse train: --- Pulse width: --- Number of RF-channels: 2 (122 kHz and 13.56 MHz) Channel spacing: Not Applicable Designation of emissions 3 : 10K0A1D Type of antenna: Up to two external antennas Size/length of antenna: Antenna sd611 (V1.2): 145 x 95 mm Antenna sd612 (V1.2): 90 x 90 mm Antenna sd647 (V2.1): 52 x 40 mm Antenna sd648 (V1.1): 70 x 52 mm Connection of antenna: detachable not detachable Type of power supply: DC supply Specifications for power supply: nominal voltage: 5.00 V minimum voltage: 4.75 V maximum voltage: 5.25 V 1 Type designation of the system if EUT consists of more than one part. 2 Type designations of the parts of the system, if applicable. 3 Also known as "Class of Emission". Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 2) Page 4 of 65 Pages 2 Administrative Data Application details Applicant (full address): SKIDATA AG Untersbergstrafle 40 A-5083 Grˆdig Contact person: Mr. Christoph Sonderegger Contract identification: --- Receipt of EUT: 25 August 2005 Date(s) of test: September 2005 Note(s): --- Report details Report number: 55426-050412 Edition: 2 Issue date: 20 September 2005 Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 5542…

Text truncated - open the document above for the full version.

Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 20 of 65 Pages Test setup for conducted DC powerline emission measurement Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 21 of 65 Pages Test setup for radiated emission measurement 9 kHz ñ 30 MHz Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 22 of 65 Pages Test setup for radiated emission measurement 9 kHz ñ 30 MHz - continued - Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 23 of 65 Pages Test setup for radiated emission measurement 9 kHz ñ 30 MHz - continued - Setup for measurement for Restricted Bands Requirement Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 24 of 65 Pages Test setup for radiated emission measurement (fully anechoic room) Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 25 of 65 Pages Test setup for radiated emission measurement (fully anechoic room) - continued - Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 26 of 65 Pages Test setup for radiated emission measurement (fully anechoic room) - continued - Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 27 of 65 Pages Test setup for radiated emission measurement (open field test site) Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 28 of 65 Pages Test setup for radiated emission measurement (open field test site) - continued - Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 29 of 65 Pages Test setup for radiated emission measurement (open field test site) - continued - Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 55426-050412 (Edition 1) Page 30 of 65 Pages Test setup for radiated emission measurement (open field test site) - continued -