QV7-GC88710-03R/C CAR

1. Observe the polarity markings on the battery compartment to ensure that the batteries are inserted in the correct polarity. 2. Attach the cover to the battery compartment as shown in the diagram below. 3. Insert rechargeable batteries into the battery compartment. 4. Use a screwdriver to secure the battery compartment cover in place. Inserting the remote control batteries Inserting the battery compartment into the vehicle Instructions: Check that the ON/OFF switch is in the “ON” position. The vehicle will not respond to the remote control when the switch is in the “OFF” position. Calibrating the vehicle 1:28 Instruction manual Thank you for purchasing one of our toy products. To ensure that you get the most out of your new purchase, please read these instructions carefully before using the toy for the first time. They contain important information on how to operate the product. Warning: Do not attempt to modify or re-assemble this product. Unauthorized changes may void your right to use the product. WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this toy. 1. Insert the USB plug into an indoor USB power supply, and then connect the battery compartment to the charging cable. 2. A full charge takes 90 minutes. When charging the LED indicator turns into red,when charging is complete ,the LED indicator stays off. 3. Regularly inspect the toy, battery charger, charging cable, connectors and other components for signs of damage. In the event of any damage, discontinue use and send the parts for repair. Caution： Electrical product Ensure adult supervision at all times Charging the batteries This product is not suitable for children aged 6 or under. When using electrical products, precautions must be taken to prevent the risk of an electric shock. 2x1.5v“AA” ON/OFFON/OFF USB Stunt car 1. Switch on the vehicle using the ON/OFF switch. 2. Use the throttle levers on the remote control to make the vehicle move forwards, backwards, left or right. 3. Switch off the vehicle and remote control after use. 1. The batteries must only be charged under adult supervision. 2. Before charging the batteries, remove the battery compartment from the vehicle chassis. 3. Remove empty batteries from the vehicle and remote control. 4. Ensure that the vehicle is switched off before inserting the batteries. 5. Ensure that the batteries are inserted in the correct polarity (observe the + and – markings on the battery compartment). 6. Do not attempt to charge non-rechargeable batteries. 7. Do not short circuit the battery terminals. 8. If you do not plan to use the vehicle for an extended period, remove the batteries from the vehicle and remote control to prevent leakage. 9. Do not throw batteries into open flames, as this may cause them to explode or leak. 10. Different types of batteries or new and used batteries are not to be mixed. 11. Only use batteries from recommended or reputable manufacturers. 12. Regularly inspect the batteries for signs of leakage. 13. Keep this instruction manual in a safe place for future reference. It contains important information on how to use the product safely. 14.The battery charger used with the electric toy shall be regularly examined for damage to the supply cord, plug, enclosure or other parts, and in the event of damage, it shall not be used until the damage has been repaired. 1. Remove the batteries when you do not plan to use the toy for an extended period. 2. Use a damp cloth to wipe the vehicle clean. 3. Do not expose the toy to high temperatures, moisture or direct sunlight. 4. Do not immerse the toy in water, as this may damage the electrical components. Do not touch the wheels when the vehicle is moving, as this may damage the vehicle. Do not use the vehicle next to roads or other hazards, as this may cause an accident. Do not use the vehicle in puddles, mud or sand. Basic controls Using the vehicle Battery safety information Care and maintenance Caution Fig. 1 1.Push both throttle levers upwards to make the vehicle move forwards. 2.Pull both throttle levers downwards to make the vehicle move backwards. 3.Push the left throttle lever upwards and pull the right throttle lever downwards to make the vehicle spin clockwise. 4.Pull the left throttle lever downwards and push the right throttle lever upwards to make the vehicle spin anticlockwise. 5.Push the left throttle lever upwards to flip the wheels and make the vehicle move forwards. 6.Pull the left throttle lever downwards to flip the wheels and make the vehicle move backwards. Fig. 2Fig. 3 Fig. 4Fig. 5Fig. 6 Hereby, (GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD ) , declares that this (Vehicle) is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following internet address: http://www.symatoys.com/down/declaration-of-conformity.html SIMPLIFIED EU DECLARATION OF CONFORMITY Manufacturer: Guangdong Syma Model Aircraft Industrial Co., Ltd. Address: No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City,Guangdong, China. Postal Code: 515800 Sales department: +86 0754 86980668 After-sales service: +86 0754 86395095 Fax: +86 0754 86395098 Website: www.symatoys.com Email: [email protected] The company has the right of final interpretation of this user manual. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter…

Text truncated - open the document above for the full version.

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-04-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: QV7-GC88710-03 [GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Ivan Chen)

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-04-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: QV7-GC88710-03 [GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Ivan Chen)

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Agent Authorization Company: GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD Address: NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Product Name: R/C CAR Model Number(s): TG1003 Product Description: R/C CAR We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-12-07 Name: Ivan Chen Company: GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD

GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD NO.2 WEST XINGYE ROAD LAIMEI INDUSTRIAL AREA CHENG HAI, Shantou, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-12-04 Subject; Request for Confidentiality FCC ID: QV7-GC88710-03 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Ivan Chen

Report No.: AGC15705231127AP03 Page 1 of 4 EXTERNAL PHOTOS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC15705231127AP03 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC15705231127AP03 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC15705231127AP03 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm&20mm FCC ID: QV7-GC88710-03

Report No.: AGC15705231127AP03 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC15705231127AP03 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) 2.4G Antenna 27 mm Report No.: AGC15705231127AP03 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC15705231127FH01 FCC ID : QV7-GC88710-03 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : R/C CAR BRAND NAME : REVOLT, SYMA MODEL NAME : TG1003 APPLICANT : GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. DATE OF ISSUE : Dec. 01, 2023 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705231127FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 01, 2023 Valid Initial Release Report No.: AGC15705231127FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC15705231127FH01 Page 4 of 10 1. General Information Applicant GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Manufacturer GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Factory GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Product Designation R/C CAR Brand Name REVOLT, SYMA Test Model TG1003 Series Model N/A Difference Description N/A Date of receipt of test item Nov. 16, 2023 Date of Test Nov. 16, 2023 to Dec. 01, 2023 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Dec. 01, 2023 Reviewed By Calvin Liu (Reviewer) Dec. 01, 2023 Approved By Max Zhang Authorized Officer Dec. 01, 2023 Report No.: AGC15705231127FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: 2.4G: 2.405GHz ~ 2.470GHz Hardware Version V1.0 Software Version V1.0 Modulation Type GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Wire Antenna Antenna Gain 2dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC15705231127FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC15705231127FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 R…

Text truncated - open the document above for the full version.

Page 1 of 33 FCC Test Report Report No.: AGC15705231127FR01 FCC ID : QV7-GC88710-03 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : R/C CAR BRAND NAME : REVOLT, SYMA MODEL NAME : TG1003 APPLICANT : GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. DATE OF ISSUE : Dec. 01, 2023 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15 Subpart C §15.249 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15705231127FR01 Page 2 of 33 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 01, 2023 Valid Initial Release Report No.: AGC15705231127FR01 Page 3 of 33 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCY .......................................................................................................... 7 2.3. ANTENNA REQUIREMENT....................................................................................................................... 8 4. DESCRIPTION OF TEST MODES ................................................................................................................. 10 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 11 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 11 5.2 EQUIPMENT USED IN TESTED SYSTEM ............................................................................................... 11 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 11 6. TEST FACILITY .............................................................................................................................................. 12 7. RADIATED EMISSION ................................................................................................................................... 13 7.1. TEST LIMIT .............................................................................................................................................. 13 7.2. MEASUREMENT PROCEDURE ............................................................................................................. 14 7.3. TEST SETUP............................................................................................................................................ 16 7.4. TEST RESULT .......................................................................................................................................... 17 8. BAND EDGE EMISSION ................................................................................................................................ 23 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 23 8.2. TEST SETUP............................................................................................................................................ 23 8.3 RADIATED TEST RESULT ........................................................................................................................ 23 9. 20DB BANDWIDTH ........................................................................................................................................ 28 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 28 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 28 9.3. MEASUREMENT RESULTS .................................................................................................................... 29 10. FCC LINE CONDUCTED EMISSION TEST ................................................................................................ 31 10.1. LIMITS OF LINE CONDUCTED EMISSION TEST ................................................................................ 31 Report No.: AGC15705231127FR01 Page 4 of 33 10.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST .............................................................. 31 10.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................... 32 10.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST.......................................................... 32 10.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST ................................................................... 32 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .......................................................................................... 33 APPENDIX B: PHOTOGRAPHS OF THE EUT ................................................................................................. 33 Report No.: AGC15705231127FR01 Page 5 of 33 1. VERIFICATION OF CONFORMITY Applicant GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Manufacturer GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Factory GUANGDONG SYMA MODEL AIRCRAFT INDUSTRIAL CO., LTD. Address No. 2 West Xingye Road Laimei Industrial Area, Chenghai Shantou City, Guangdong, China Product Designation R/C CAR Brand Name REVOLT, SYMA Test Model TG1003 Series Model N/A Difference Description N/A Date of receipt of test item Nov. 16, 2023 Date of test Nov. 16, 2023 to Dec. 01, 2023 Deviation…

Text truncated - open the document above for the full version.

Report No.: AGC15705231127AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC15705231127AP02 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************