QVHAM10US01Humidifier

Register Your free 2 year warranty today. Regístrese Obtenga hoy su garantía gratuita de 2 años. OPERATING MANUAL INSTRUCCIONES DE SEGURIDAD Important! Weekly and monthly cleaning required. ¡Importante! Requiere una limpieza semanal y mensual. 2 WARNING THE MACHINE AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS. 1. Pacemakers and defibrillators may be affected by strong magnetic fields. If you or someone in your household has a pacemaker or defibrillator, avoid placing the remote control in a pocket or near to the device. 2. Credit cards and electronic storage media may also be affected by magnets and should be kept away from the remote control and the top of the machine. WARNING These warnings apply to the machine, and also where applicable, to all tools, accessories, chargers or mains adaptors. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: 3. Extreme caution is necessary when any machine is used by or near children or infirm persons and whenever it is left operating and unattended. 4. This Dyson machine is not intended for use by persons (including children) with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety. 5. Use only as described in this Dyson Operating Manual. Do not carry out any maintenance other than that shown in this manual, or advised by the Dyson Helpline. 6. Ensure machine is fully assembled in line with the instructions before use. Do not dismantle the machine or use without the loop amplifier fitted. 7. Do not allow to be used as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the machine or remote control. 8. Suitable for dry locations ONLY. Do not use outdoors or on wet surfaces. Do not use in bathrooms, laundry areas or similar indoor locations. Never locate the machine where it may fall into a bath or other water container. Do not use or store where it may get wet or in the immediate surroundings of a bath, a shower, or a swimming pool. 9. Do not use in areas where petrol, paint, or flammable liquids are used or stored or where their vapors are present. Do not use in conjunction with or directly next to an air freshener or similar products. 10. Do not locate directly below or above a mains electricity supply socket. 11. Always plug directly into a wall socket. 12. Do not handle any part of the plug or machine with wet hands. 13. Do not use with a damaged cord or plug. If the supply cord is damaged it must be replaced by Dyson, its service agent or similarly qualified persons in order to avoid a hazard. 14. If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact the Dyson Helpline. 15. Contact the Dyson Helpline when service or repair is required. Do not disassemble the machine as incorrect reassembly may result in an electric shock or fire. 16. Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable. 17. Do not stretch the cord or place the cord under strain. Keep cord away from heated surfaces. 18. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over. 19. To prevent a possible fire, do not use with any opening or exhaust blocked, and keep free of dust, lint, hair, and anything that may reduce IMPORTANT SAFETY INSTRUCTIONS BEFORE USING THIS MACHINE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE MACHINE When using an electrical machine, basic precautions should always be followed, including the following: 3 Do not pull on the cord. Do not store near heat sources. Do not use near open flames. Do not carry by the loop amplifier. airflow. Do not put any object into the inlet grill or the exhaust opening as this may cause an electric shock or fire, or damage the appliance. 20. Do not use near furnaces, fireplaces, stoves or other high temperature heat sources. 21. Turn off all controls before unplugging. 22. Unplug when not in use for extended periods and before filling, cleaning, maintenance or servicing. 23. When refilling, only do so as described in this Dyson operating manual. Do not use hot water. 24. Always place the machine on a firm, flat, level surface. 25. Do not use on soft surfaces, such as a bed, where openings may become blocked. 26. Do not place the machine in an area where it is accessible to children. 27. Always carry the machine by the base, do not carry it by the loop amplifier. 28. Do not tilt, move, or attempt to empty the machine while it is operating. 29. Do not use unless the machine has been cleaned according to instructions. 30. Use only cleaning agents recommended by Dyson. 31. Do not pour water into any openings except for the water tank. 32. This machine must only be supplied at safety extra low voltage corresponding to the marking on the base. Dyson recommends that this machine is only to be used with the power supply unit provided with it. 33. This machine contains a UV-C emitter. Unintended use of the machine or damage to the housing may result in the escape of dangerous UV-C radiation. UV-C radiation may, even in little doses, cause harm to the eyes and skin. 34. WARNING – This machine contains a UV-C emitter. Do not stare at the light source. 35. If any part is replaced the replacement must be fitted in its correct position. 36. Choking hazard – This remote control unit contains a small battery. Keep the remote control away from children and do not swallow the battery. If the battery is swallowed seek medical advice at once. IMPORTANT SAFETY FEATURES For your safety this machine is fitted with automatic cut-out switches that operate if it tips over. If the switches op…

Text truncated - open the document above for the full version.

www.dyson.com REG. IN ENGLAND NO. 2627406 REG. OFFICE: TETBURY HILL, MALMESBURY, WILTSHIRE, SN19 0RP "I, Fabio Scalon Principal Engineer of Dyson Ltd do hereby authorize Intertek Testing Services (Kenneth Lam) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 1992) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,853(a). Dated this 3 rd day of February 2015 By Fabio Scalon Signature Printed Title Principal Engineer

www.dyson.com REG. IN ENGLAND NO. 2627406 REG. OFFICE: TETBURY HILL, MALMESBURY, WILTSHIRE, SN19 0RP Attention: Intertek - Consumer & Commercial Electrical 2/F Garment Center, 576 Castle Peak Road, Kowloon, Hong Kong Request for confidentiality Applicant: Dyson Ltd FCC ID: QVHAM10US01 To whom it may concern, Permanent Confidentiality Request is hereby submitted by Dyson Ltd to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description Rationale for request for confidentiality: Dyson has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. DYSON LIMITED TETBURY HILL MALMESBURY WILTSHITE ENGLAND SN16 0RP Tel +44 (0)1666 827200 The fee for confidentiality has been submitted along with the fee for certification. If you have questions or need further information, please contact the undersigned. Sincerely, Fabio Scalon Principal Engineer Dyson Ltd

INTERTEK TESTING SERVICE Report No.: 15020115HKG-001 FCC ID: QVHAM10US01 Equipment Photographs Model : AM10 (External) INTERTEK TESTING SERVICE Report No.: 15020115HKG-001 FCC ID: QVHAM10US01 Equipment Photographs Model : AM10 (External)

FCC ID: QVHAM10US01 X296 US FCC LABEL STICKER JN.72443 PN.305280-01-02 06.02.15 SIZE: (W) 35mm x (H) 5mm COLOUR: BLACK, PANTONE 032 C CUTTER GUIDE MATERIAL: 50 MICRON MATTE SILVER POLYESTER NOTE: THIS IMAGE IS FOR LOCATION PURPOSES ONLY FITS INTO RECESS AS SHOWN POSITION LOCATIONBASE PLATE FCC ID: QVHAM10US01

INTERTEK TESTING SERVICE Report No.: HK15020115 FCC ID: QVHAM10US01 Equipment Photographs Model: AM10 (Internal) INTERTEK TESTING SERVICE Report No.: HK15020115 FCC ID: QVHAM10US01 Equipment Photographs Model: AM10 (Internal) INTERTEK TESTING SERVICE Report No.: HK15020115 FCC ID: QVHAM10US01 Equipment Photographs Model: AM10 (Internal) INTERTEK TESTING SERVICE Report No.: HK15020115 FCC ID: QVHAM10US01 Equipment Photographs Model: AM10 (Internal)

lntertek Valued Quality. Delivercd. lssuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKI-AS 005 - TEST) under HOKLAS for specifìc laboratory activities as listed in the HOKLAS directory of accredited laborator¡es. TEST REPORT Report No.: 150201 I SHKG-001 Dyson Ltd. Application For Certification (Original Grant) (FCC lD: QVHAMI0US0l) Humidifier Prepared and Checked by: Approved by: Lam Hon Ming, Kenneth Senior Lead Engineer Chow Chi Ming, Bil Manager Date: February 12,2015 lntertek's standard Terms and Cond¡tions æn be obta¡ned at our wêbsitê http://w intertekcom/terms/ Th¡s report shall not be reproduced, except in full Th¡s report is for the êxclusive uss of lnterteks Client and ¡s provided pursuant to the agreement botweên lntertek and its Client lntertêk's rêspons¡bìlity and liabil¡ty are l¡m¡ted to thê terms ând conditions of the agr€ement lntortek assumes no liabil¡ty to âny party, othêr then to the Client in accordancê w¡th the agreement,foranyloss,oxpenseordamageoccas¡onedbythêusôoflhisreport OnlytheClisnt¡sauthorizodtopermitcopy¡ngord¡stribut¡onofthisreportand then only ¡n its entirety Any uso of thê lntsrtek name or one of its marks for the sals or adverlisemenl of the testod material, product or seru¡co must first bê approved in writing by lntertêk The obseryations and test results ¡n this report are relevant only to the sâmple tested This report by ¡tself does not imply that the material, product, or seru¡cê ¡s or hâs evor been under an lnt€rtek certificâtion progrâm lntertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Webs¡te: www hk.intertek-etlsemko.com Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 15020115HKG-001 i FCC ID: QVHAM10US01 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Grantee: Dyson Ltd. Grantee Address: Tetbury Hill, Malmesbury, United Kingdom SN16 0RP Contact Person: Fabio Scalon Tel: +44 (0) 1666 834433 Ext: 4433 Fax: +44 (0) 1666 827299 e-mail: [email protected] Manufacturer: Dyson Ltd Manufacturer Address: Tetbury Hill, Malmesbury, United Kingdom SN16 0RP Brand Name: Dyson Model: AM10 Type of EUT: Ultrasonic Humidifier Description of EUT: Humidifier Serial Number: N/A FCC ID: QVHAM10US01 Date of Sample Submitted: February 03, 2015 Date of Test: February 03, 2015 to February 11, 2015 Report No.: 15020115HKG-001 Report Date: February 12, 2015 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 15020115HKG-001 ii FCC ID: QVHAM10US01 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com SUMMARY OF TEST RESULT TEST SPECIFICATION REFERENCE RESULTS Field Strength Limit 18.305 Pass Conduction limit 18.307 Pass The equipment under test is found to be complying with the following standards: FCC Part 18, October 1, 2013 Edition Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 15020115HKG-001 iii FCC ID: QVHAM10US01 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 General Description............................................................................................ 1 1.1 Product Description ........................................................................................... 1 1.2 Related Submittal(s) Grants ............................................................................... 1 1.3 Test Methodology .............................................................................................. 1 1.4 Test Facility ....................................................................................................... 1 2.0 System Test Configuration ................................................................................. 2 2.1 Justification........................................................................................................ 2 2.2 EUT Exercising Software ................................................................................... 2 2.3 Special Accessories........................................................................................... 2 2.4 Measurement Uncertainty .................................................................................. 2 2.5 Support Equipment List and Description............................................................. 2 3.0 Emission Results ................................................................................................ 3 3.1 Field Strength Calculation .................................................................................. 3 3.2 Radiated Emission Configuration Photograph .................................................... 4 3.3 Radiated Emission Data .................................................................................... 4 3.4 Conducted Emission Configuration Photograph ................................................. 4 3.5 Conducted Emission Data...........................................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: 15020115HKG-001 FCC ID: QVHAM10US01 Configuration Photographs Worst-Case Radiated Emissions (Front View) Model: AM10 INTERTEK TESTING SERVICE Report No: 15020115HKG-001 FCC ID: QVHAM10US01 Configuration Photographs Worst-Case Radiated Emissions (Back View) Model : AM10

INTERTEK TESTING SERVICE Report No: 15020115HKG-001 FCC ID: QVHAM10US01 i Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) Model: AM10 INTERTEK TESTING SERVICE Report No: 15020115HKG-001 FCC ID: QVHAM10US01 ii Configuration Photographs Worst-Case Line-Conducted Emissions (Back View) Model: AM10 INTERTEK TESTING SERVICE Report No: 15020115HKG-001 FCC ID: QVHAM10US01 iii Configuration Photographs Worst-Case Line-Conducted Emissions (Side View) Model: AM10