QVHAM12001Desk Fan

Form: RFT-AMER-TCB-OP-19o Revision: 1 Page 1 of 1 Date: 1/ 25/2023 Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to 47 CFR part §2.911(d)(7) of the FCC rules To whom it may concern, This letter is to certify that Dyson Inc (“Applicant”) accepts responsibilities to act as its own agent pursuant to 47 CFR part §2.911(d)(7) of the FCC rules for service of process. I consent to the obligation to accept service of process on behalf of the applicant in regard to the FCC ID designated below. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name : Dyson Inc Contact Name : Andrew Wingerter Address : 1330 W Fulton St, 5 th Floor, Chicago IL 60607, USA Telephone No : (312) 805-5584 Email : [email protected] FCC ID : QVHAM12001 Applicant FRN : 0034347922 Signature: ____________________________________ Date: __________________________________ 12/08/2025

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/ 25/2023 Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: Dyson Inc FCC ID: QVHAM12001 To whom it may concern, Dyson Inc (“Applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part § 2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part § 2.911(d)(5)(ii) of the FCC rules. Applicant further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. [Signature of authorized Proprietor, Partner or Authorized Officer] Andrew Wingerter Senior Principal Compliance and Approvals Regulatory Specialist Dyson Inc 12/08/2025

1(1) Letter of Agency "I, an approved signer of Dyson Inc do hereby authorize Intertek Testing Services (Mr. Tim Lee / Herbert Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 8 day December of 2025 By ________________________ Signature Andrew Wingerter___________ Printed Name Senior Principal Compliance and Approvals Regulatory Specialist Title Remark: The person who signs this authorization letter must be the grantee contact of record in the Grantee Code data base.

1(2) 12/8/2025 Attention: Application Examiner RE: Request for Confidentiality Applicant: Dyson Inc FCC ID: QVHAM12001 To Whom It May Concern: Permanent Confidentiality Request is hereby submitted by Dyson Inc to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block Diagrams • Detailed Operational/Functional Description Short-term Confidentiality Request is hereby submitted by Dyson Inc to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization: • Test setup photos • External photos (NOTE: External photos can only be held for short-term confidentiality) • Internal photos • User manual Rationale for request for confidentiality: Dyson Inc has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] 2(2) If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] Andrew Wingerter Senior Principal Compliance and Approvals Regulatory Specialist Dyson Inc

Model : AM12 , Label Artwork and location sample Dimension : 70 mm X 24 mm

INTERTEK TESTING SERVICE FCC ID: QVHAM12001 MPE Analysis Report The Equipment Under Test (EUT) is a 2.4GHz Wi-Fi, 5GHz Wi-Fi and 2.4GHz Bluetooth BLE (1Mbps) Transceiver for a Desk Fan. The EUT is powered by 120VAC. For Maximum Permissible Exposure (MPE) evaluation of the unit, the maximum power density at 20 cm from this transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65 and meet the requirement listed in KDB447498 D04 v01. For the 2.4GHz and 5GHz RF portion of the unit, the measured powers among all the measured channels were within its production tolerance. The maximum source-based time-averaging duty factor is 100%. From these data and its operating configuration, the exposed power density at a distance (R) of 20 cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: BLE Portion Antenna Type: Internal, integral Antenna Gain: 3.09dBi Nominal Conducted Power: 2.037dBm Range of Peak Conducted Power: 0dBm to 4dBm 2.4GHz Wi-Fi Portion The Wi-Fi portion was tested in according with the following power output and in actual application the below limit shall not be exceeded. Operating Mode Nominal Power Range of Peak Conducted Power 802.11b 16.941dBm 14dBm to 18dBm 802.11g 16.280dBm 11dBm to 18dBm 802.11n(HT20) 16.411dBm 11dBm to 18dBm An internal, integral antenna has been used. Antenna Gain: 3.09dBi 5GHz Wi-Fi Portion The Wi-Fi portion was tested in according with the following power output and in actual application the below limit shall not be exceeded. Operating Mode Nominal Power Range of RMS Conducted Power 802.11a 15.718dBm 12dBm to 16dBm 802.11n(HT20) 15.883dBm 12dBm to 16dBm An internal, integral antenna has been used. Antenna Gain: 4.41dBi INTERTEK TESTING SERVICE FCC ID: QVHAM12001 For Maximum Permissible Exposure (MPE) evaluation of the EUT, the maximum power density at 20 cm from this mobile transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65. 1) For the BLE portion, maximum conducted power was 4dBm. The distance (D) between the antenna and the equipment under test (EUT) was 3 meters. And the maximum source-based time-averaging duty factor is 100%. From these data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The radiated power = 4dBm + 3.09dBi = 7.09dBm (5.12 mW) The radiated (EIRP) source-based time-averaging output power = (5.12 * 1) mW = 5.12 mW The power density at 20 cm from the antenna = EIRP / 4πR^2 = 0.001019 mW cm-2 2) For the 2.4GHz Wi-Fi portion, maximum conducted power was 18dBm. The distance (D) between the antenna and the equipment under test (EUT) was 3 meters. And the maximum source-based time-averaging duty factor is 100%. From these data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The radiated power = 18dBm + 3.09dBi = 21.09dBm (128.53 mW) The radiated (EIRP) source-based time-averaging output power = (128.53 * 1) mW = 128.53 mW The power density at 20 cm from the antenna = EIRP / 4πR^2 = 0.025570 mW cm-2 3) For 5GHz Wi-Fi portion, maximum conducted power was 16 dBm. The distance (D) between the antenna and the equipment under test (EUT) was 3 meters. And the maximum source-based time-averaging duty factor is 100%. From these data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The radiated power = 16dBm + 4.41dBi = 20.41dBm (109.90 mW) The radiated (EIRP) source-based time-averaging output power = (109.90 * 1) mW = 109.90 mW The power density at 20 cm from the antenna = EIRP / 4πR^2 = 0.021864 mW cm-2 INTERTEK TESTING SERVICE FCC ID: QVHAM12001 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm-2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: “ FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the unit at least 20cm from nearby persons.” In addition, for this product with multiple transmitter and antenna (BLE portion and 2.4GHz Wi-Fi portion; BLE portion and 5GHz Wi-Fi portion), the requirement of Simultaneous Transmission evaluation has also been considered and has complied with the following conditions of the worst case; MPE1/Limit1 + MPE2/Limit2 ≤ 1 Thus, 0.001019 / 1 + 0.025570 / 1 = 0.026589 BLE portion 2.4GHz Wi-Fi portion 0.001019 / 1 + 0.021864 / 1 = 0.022883 BLE portion 5GHz Wi-Fi portion It is concluded that no Simultaneous Transmission evaluation is required.

TEST REPORT 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 49 Report No.: 25020523HKG-002R1 Dyson Inc. Application for Original Grant of 47 CFR Part 15 Certification Desk Fan This report contains the data of 5GHz WLAN (Wi-Fi) portion only. FCC ID: QVHAM12001 This report supersedes previous report with report number 25020523HKG-002 dated March 27, 2025. Prepared and Checked by: Approved by: Signed on File Leung Chun Ning, Peter Engineer Hosea Chan Assistant Supervisor Date: February 13, 2026 TEST REPORT Dyson Inc. Intertek Report No: 25020523HKG-002R1 Page 2 of 49 GENERAL INFORMATION Grantee: Dyson Inc. Grantee Address: 1330 W Fulton St, 5th Floor, Chicago IL 60607, United States FCC Specification Standard: FCC Part 15, October 1, 2024 Edition FCC ID: QVHAM12001 FCC Model(s): AM12 Type of EUT: Unlicensed National Information Infrastructure Transmitter Description of EUT: Desk Fan Brand Name: Sample Receipt Date: February 18, 2025 Date of Test: February 18, 2025 to March 06, 2025 Report Date: March 27, 2025 Environmental Conditions: Temperature: +10 to 40°C Relative Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 Certification. Remark: This report contains the data of 5GHz Wi-Fi portion only AMENDMENT HISTORY Report No. Issue Date Content 25020523HKG-002 March 27, 2025 Original Report 25020523HKG-002R1 February 13, 2026 Standard Update TEST REPORT Dyson Inc. Intertek Report No: 25020523HKG-002R1 Page 3 of 49 SUMMARY OF TEST RESULT Test Items FCC Part 15 Section Results Antenna Requirement 15.407(a) Complied Max. Conducted Output Power (Peak) 15.407(a) Complied Transmit Power Control (TPC) 15.407(h) Not Applicable Min. 6dB RF Bandwidth 15.407(e) Complied 26 dB emission bandwidth 15.407(a) Complied Occupied Bandwidth N/A Complied Max. Power Density (Average) 15.407(a) Complied Out of Band Antenna Conducted Emission 15.407(b) Not Applicable Radiated Emission in Restricted Bands and Spurious Emissions 15.407(b), 15.209 & 15.109 Complied AC Power Line Conducted Emission 15.207 & 15.107 Complied Dynamic Frequency Selection (DFS) 15.407 Complied Remark: Not Applicable (If the EUT is <500mW (27dBm)) Note: Pursuant to FCC Part 15 Section 15.215(c), the 20dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over expected variations in temperature and supply voltage were considered. The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2024 Edition TEST REPORT Dyson Inc. Intertek Report No: 25020523HKG-002R1 Page 4 of 49 TABLE OF CONTENTS EXHIBIT 1 GENERAL DESCRIPTION ..................................................................................... 5 1.1 Product Description .................................................................................................. 5 1.2 Test Methodology ..................................................................................................... 6 1.4 Test Facility ................................................................................................................ 6 1.5 Related Submittal(s) Grants ...................................................................................... 6 EXHIBIT 2 SYSTEM TEST CONFIGURATION ......................................................................... 7 2.1 Justification ............................................................................................................... 7 2.2 EUT Exercising Software............................................................................................ 8 2.3 Description of Accessories ........................................................................................ 8 2.4 Measurement Uncertainty........................................................................................ 8 EXHIBIT 3 TEST RESULTS .................................................................................................... 9 3.1 Maximum Conducted (Peak) Output Power at Antenna Terminals ......................... 9 3.2 26dB Bandwidth and Occupied Bandwidth ............................................................ 12 3.3 Maximum Power Spectral Density .......................................................................... 13 3.4 Field Strength Calculation ....................................................................................... 16 3.5 Transmitter Radiated Emissions in Restricted Bands and Spurious Emissions ...... 17 3.6 AC Power Line Conducted Emission ...................…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan t (886-2) 2299-3279f (886-2) 2298-0488www.sgs.com.tw Member of SGS Group Report No.: TEOT2410000974E4 Page No.: 1 of 16 Antenna Test Report Report No.: TEOT2410000974E4 Applicant Name: Dyson Operations Pte Ltd Manufacturer Name: Dyson Operations Pte Ltd Product Name: Bladeless Table Fan (N739) Model Number: SD2 Measurements performed at SGS Taiwan Ltd. Hwaya District, Taiwan Issued Date: November 21, 2024 Name Date & Signature Distribution Prepared by: Nandi Chen Sr. Engineer November 21, 2024 Approved by: Shawn Yen Supervisor November 21, 2024 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan t (886-2) 2299-3279f (886-2) 2298-0488www.sgs.com.tw Member of SGS Group Report No.: TEOT2410000974E4 Page No.: 2 of 16 Revision Version Report Number Revision Date Memo TEOT2410000974E4 00 2024/11/21 Initial creation of test report. This test report contains a reference to the previous version test report that it replaces. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan t (886-2) 2299-3279f (886-2) 2298-0488www.sgs.com.tw Member of SGS Group Report No.: TEOT2410000974E4 Page No.: 3 of 16 Measurement System Information General Information Testing Condition: ⚫ Temperature: 22±3 ̊C ⚫ Humidity: <80% Measurement Facility: ⚫ Measurement Chamber: MVG 3D fully anechoic chamber and its measuring system (Stargate-24-L) ⚫ Network Analyzer: Agilent E5071C Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible athttp://www.sgs.com.tw/Terms-and-Conditionsand for electronic format documents, subject to Terms and Conditions for Electronic Documents athttp://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of it…

Text truncated - open the document above for the full version.

FCC 15.407 2015 3/5/2025 1 / 48 9:53:13 AM FCC 15.407 2015 DUT Information Frequencies WLAN CH 36 (5180 MHz) WLAN CH 40 (5200 MHz) WLAN CH 48 (5240 MHz) WLAN CH 149 (5745 MHz) WLAN CH 157 (5785 MHz) WLAN CH 165 (5825 MHz) WLAN CH 52 (5260 MHz) WLAN CH 56 (5280 MHz) WLAN CH 64 (5320 MHz) WLAN CH 100 (5500 MHz) WLAN CH 120 (5600 MHz) WLAN CH 140 (5700 MHz) WLAN CH 116 (5580 MHz) WLAN CH 151 (5755 MHz) WLAN CH 159 (5795 MHz) WLAN CH 155 (5775 MHz) 5850 MHz (5850 MHz) WLAN CH 60 (5300 MHz) WLAN CH 144 (5720 MHz) Bandwidths 20 MHz (20 MHz) 40 MHz (40 MHz) 80 MHz (80 MHz) Power 20.000 dBm (20 dBm) Beamforming Gain Powerstep name (value) Beamforming gain table names 20.000 dBm (20 dBm) BFG_'20.000 dBm'_0.000dB; Gain Tables Powerstep name (value) Gain table names 20.000 dBm (20 dBm) Port 1: 0dBi; DUT Settings No. of transmission chains 1 DFS capability Yes DFS Mode Master Equipment Type Portable TPC No -4 -2 0 2 4 5 5150 5200 5300 5400 5500 5600 5700 5800 5850 Gain in dBi Frequency in MHz Gaintable BFG_'20.000 dBm'_0.000dB Gaintable: BFG_'20.000 dBm'_0.000dB FCC 15.407 2015 3/5/2025 2 / 48 9:53:13 AM -4 -2 0 2 4 5 5150 5200 5300 5400 5500 5600 5700 5800 5855 Gain in dBi Frequency in MHz Gaintable 0dBi Gaintable: 0dBi Hardware Setup: WMS Measurements\TS8997 Spectrum Analyzer: SA FSV 40 (SA FSV 40) @ VISA (ADR TCPIP::192.168.48.111::INST0::INSTR), SN 1307.9002K40/101076, FW 3.40 Vector Generator: VG SMBV100B (VG SMBV100B) @ VISA (ADR TCPIP::192.168.48.29::INST0::INSTR), SN 101685, FW 4.70.006.33 Generator: SMBV100A (SMBV100A) @ VISA (ADR TCPIP::192.168.48.25::INST0::INSTR), SN 260451, FW 4.70.108.41 / Drv:5.8.0 OSP: OSP-B157W (OSP-B157W) @ VISA (ADR TCPIP::192.168.48.157::INST0::INSTR), SN 1527.1144. /, FW 1.27.0.0 FCC 15.407 2015 3/5/2025 3 / 48 9:53:13 AM Summary Test Frequency (MHz) Nominal Power (dBm) Nominal Bandwidth (MHz) Result Emission Bandwidth 26 dB 5180.000 20.0 20.000000 PASS Power Spectral Density 5180.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5180.000 20.0 20.000000 PASS Emission Bandwidth 26 dB 5200.000 20.0 20.000000 PASS Power Spectral Density 5200.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5200.000 20.0 20.000000 PASS Emission Bandwidth 26 dB 5240.000 20.0 20.000000 PASS Power Spectral Density 5240.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5240.000 20.0 20.000000 PASS Emission Bandwidth 26 dB 5260.000 20.0 20.000000 PASS Power Spectral Density 5260.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5260.000 20.0 20.000000 PASS Emission Bandwidth 26 dB 5300.000 20.0 20.000000 PASS Power Spectral Density 5300.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5300.000 20.0 20.000000 PASS Emission Bandwidth 26 dB 5320.000 20.0 20.000000 PASS Power Spectral Density 5320.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5320.000 20.0 20.000000 PASS Emission Bandwidth 26 dB 5500.000 20.0 20.000000 PASS Power Spectral Density 5500.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5500.000 20.0 20.000000 PASS Emission Bandwidth 26 dB 5580.000 20.0 20.000000 PASS Power Spectral Density 5580.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5580.000 20.0 20.000000 PASS Emission Bandwidth 26 dB 5700.000 20.0 20.000000 PASS Power Spectral Density 5700.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5700.000 20.0 20.000000 PASS Power Spectral Density 5745.000 20.0 20.000000 PASS Minimum Emission Bandwidth 6 dB 5745.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5745.000 20.0 20.000000 PASS Power Spectral Density 5785.000 20.0 20.000000 PASS Minimum Emission Bandwidth 6 dB 5785.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5785.000 20.0 20.000000 PASS Power Spectral Density 5825.000 20.0 20.000000 PASS Minimum Emission Bandwidth 6 dB 5825.000 20.0 20.000000 PASS Occupied Channel Bandwidth 99% 5825.000 20.0 20.000000 PASS FCC 15.407 2015 3/5/2025 4 / 48 9:53:13 AM Emission Bandwidth 26 dB (5180 MHz; 20.000 dBm; 20 MHz) Customized settings. 26 dB Bandwidth DUT Frequency (MHz) Bandwidth (MHz) Limit Min (MHz) Limit Max (MHz) Band Edge Left (MHz) Band Edge Right (MHz) 5180.000000 22.172284 --- --- 5168.913858 5191.086142 (continuation of the "26 dB Bandwidth" table from column 6 ...) DUT Frequency (MHz) Max Level (dBm) Result 5180.000000 2.0 PASS -30 -20 -10 0 10 5160 5170 5180 5190 5200 Level in dBm Frequency in MHz 26 dB Bandwidth 22.172 MHz Measurement Setting Instrument Value Target Value Start Frequency 5.16000 GHz 5.16000 GHz Stop Frequency 5.20000 GHz 5.20000 GHz Span 40.000 MHz 40.000 MHz RBW 300.000 kHz ~ 300.000 kHz VBW 1.000 MHz >= 900.000 kHz SweepPoints 267 ~ 267 Sweeptime 18.930 μs AUTO Reference Level 10.000 dBm 10.000 dBm Attenuation 30.000 dB AUTO Detector MaxPeak MaxPeak SweepCount 200 200 Filter 3 dB 3 dB Trace Mode Max Hold Max Hold Sweeptype FFT AUTO Preamp off off Stablemode Trace Trace Stablevalue 1.00 dB 1.00 dB Run 8 / max. 150 max. 150 Stable 1 / 1 1 Max Stable Difference 0.77 dB 1.00 dB FCC 15.407 2015 3/5/2025 5 / 48 9:53:13 AM Power Spectral Density (5180 MHz; 20.000 dBm; 20 MHz) Customized settings. Result DUT Frequency (MHz) Frequency (MHz) PSD (dBm) Limit Max (dBm) Result 5180.000000 5181.386139 4.065 17.0 PASS Ports Port Duty Cycle (%) 1 0.000 -10 0 10 20 30 5170 5175 5180 5185 5190 Level in dBm Frequency in MHz Power Spectral Density LimitSum LevelPSD Measurement Setting Instrument Value Target Value Start Frequency 5.17000 GHz 5.17000 GHz Stop Frequency 5.19000 GHz 5.19000 GHz Span 20.000 MHz 20.000 MHz RBW 1.000 MHz <= 1.000 MHz VBW 3.000 MHz >= 3.000 MHz SweepPoints 101 ~ 40 Sweeptime 11.000 μs 10.100 μs Reference Level 10.000 dBm 10.000 dBm Attenuation 30.000 dB AUTO Detector RMS RMS SweepCount 100 100 Filter 3 dB 3 dB Trace Mode Max Hold Max Hold Sweeptype FFT AUTO Preamp off off Stablemode Trace Trace Stablevalue 0.30 dB 0.30 dB Run 7 / max. 15 max. 15 Stable 1 / 1 1 Max Stable Difference 0.25 dB 0.30 dB FCC 15.407 2015 3/5/2025 6 / 48 9:53:13 AM FCC 15.407 2015 3/5/2025 7 /…

Text truncated - open the document above for the full version.

FCC 15.407 2015 3/5/2025 1 / 48 10:19:05 AM FCC 15.407 2015 DUT Information Frequencies WLAN CH 36 (5180 MHz) WLAN CH 40 (5200 MHz) WLAN CH 48 (5240 MHz) WLAN CH 149 (5745 MHz) WLAN CH 157 (5785 MHz) WLAN CH 165 (5825 MHz) WLAN CH 52 (5260 MHz) WLAN CH 56 (5280 MHz) WLAN CH 64 (5320 MHz) WLAN CH 100 (5500 MHz) WLAN CH 120 (5600 MHz) WLAN CH 140 (5700 MHz) WLAN CH 116 (5580 MHz) WLAN CH 151 (5755 MHz) WLAN CH 159 (5795 MHz) WLAN CH 155 (5775 MHz) 5850 MHz (5850 MHz) WLAN CH 60 (5300 MHz) WLAN CH 144 (5720 MHz) Bandwidths 20 MHz (20 MHz) 40 MHz (40 MHz) 80 MHz (80 MHz) Power 20.000 dBm (20 dBm) Beamforming Gain Powerstep name …

Text truncated - open the document above for the full version.