QVL-BT817CONTACTLESS SMARTCARD READER

FCC ID: QVL-BT817 Page 1of 7 APPENDIX J INSTALLATION (USER) MANUAL EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 817 For further information or to find out more about our range of smart card and biometric solutions, visit BQT Solutions on the web at: www.bqtsolutions.com Alternatively you can contact us at one of our global locations. MIFARE ACCESS READER INSTALLATION GUIDE Version 1.1 Designed & Manufactured in Australia AUSTRALIA & ASIA PACIFICUNITED KINGDOM & EMEA Level 4, 65 Epping RoadGlobal House,1 Ashley Avenue, Epsom North Ryde NSW 2113 AustraliaSurrey KT 18 5AD United Kingdom phone:+61 (0)2 8817 2800 phone: + 44 (0)20 8823 9350 fax:+61 (0)2 8817 2811fax:+ 44 (0)20 8823 9001 email: [email protected]:[email protected] AMERICASCHINA 15030 Ventura Blvd., Ste. 19-798Suite 1208-1209, Offshore Oil Tower Sherman Oaks, CA 91403583 LingLing Rad, ZuHui District United States of AmericaShanghai, P.R. CHINA 20030 phone:+1 818 994 6888 phone:+86 (21) 5425 5935 fax:+1 818 994 0225fax:+86 (21) 5425 5936 email:[email protected] email:[email protected] For Technical Support, email: [email protected] NOTE: Information contained in this document is subject to change without notice. Copyright © 200 BQT Solutions Limited. All rights reserved. BQT Solutions and the BQT Solutions logo are registered trademarks of BQT Solutions (Australia) Pty Ltd. Mifare is a registered trademark of Philips Electronics. bt817_10wire_v1.1: Last revised April 2005 WIRING SCHEMATIC NOTE:The 0V or GND reference cable shall be included within the controller cable. The 12Vdc power cable shall NOT be included in the controller Cable. REGULATORY INFORMATION CE Mark The BT817 has passed all relevant tests and obtained CE approval. C Tick The BT817 has passed all relevant requirements for application of C Tick. FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for help Any changes or modifications not expressively approved by BQT Solutions could void the user's authority to operate this equipment. Designed & Manufactured in Australia RED +12Vdc BLACK GND YELLOW/W* 485A GREEN/W* 485B YELLOW BUZ ORANGE LED GREEN W0 WHITE W1 BROWN/W* T1 BROWN/W* T2 GND BUZ LED W0 W1 Reader Connection Power Supply Controller +12Vdc 0V Power Cable Controller Cable NOTE: If used with a shielded cable, the shield is connected to Building GND. * Tamper & RS485 cable connections are optional. INTRODUCTION Thank you for purchasing the BT817 Mifare ® Contactless Smart Card Access Reader with KeyPad. The BT817 is used in security applications and interfaces into Wiegand applications. The BT817 is preset with specific 'Keys'. Valid smart cards are issued with the same 'Keys'. This ensures that the system cannot be compromised. The reader incorporates a LED to provide feedback to a person wishing to enter. The LED is controlled by the security system. The BT817 is low profile and can be installed in new installations or as an upgraded reader in existing proximity access control systems. INSTALLATION Remove the cover by holding the unit by the rim and pushing the reader out with your thumbs. GHI 4 PRS 7 # * M NO 6 W XY 9 DEF 3 - 1 - - 10 - If necessary, drill holes for the mounting screws in the wall or mounting box on which the reader unit will be placed. Use the template provided. 1.Place the controller and power supply cable through the Grommit hole. 2.Drill the holes as indicated by the arrows. NOTE: Make sure that you don't drill through the cable. Check your circuit diagram for the colour coding of the circuit wiring. The reader can be damaged beyond repair if the wiring is connected incorrectly. Read the instructions on the next page first. 30 30 WARRANTY The BT817 comes with a 3 year warranty from the date of dispatch from BQT Solutions. The warranty is void if the instructions contained within this manual have not been adhered to. See the BQT Solutions website for further terms and conditions. SPECIFICATIONS Reader Output Wiegand 26 to 40 bit Power requirements 12Vdc Maximum Current Consumption 320mA Read range 20 - 60mm (0.8” – 2.4”)(typically) Operating temperature -10ºC to +55ºC (14ºF to 131ºF) Relative humidity 90% max, operating non-condensing Reader dimensions 90mm x 90mm x 27mm (3.54" 3.54" x 1.06") KeyPad 12 button illuminated KeyPad Status LED’s Green and Red Audible tone Tone on matching software key and wired external buzzer control Colour Charcoal IP rating IP 67 Wall View - 9 -- 2 - EXTERNAL USE Mount the reader on a suitable external single gang surface mount box. Make sure that the wire bundle to the BT817 has an IP rating of at least IP67. Use warming pads if th…

Text truncated - open the document above for the full version.

FCC ID: QVL-BT817 Page 1 of 3 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B2 PHOTOGRAPHS – TEST SAMPLE EXTERIOR FCC ID: QVL-BT817 Page 2 of 3 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B2 PHOTOGRAPHS – TEST SAMPLE EXTERIOR Power Supply FCC ID: QVL-BT817 Page 3 of 3 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B2 PHOTOGRAPHS – TEST SAMPLE EXTERIOR Power Supply Cont’d

FCC ID: QVL-BT817 Page 1of 3 APPENDIX H TEST SAMPLE LABELLING - LOCATION EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Location of Label – all 3 products BT815, BT817 and MiP5 Label material is MYLAR. It’s a self-adhesive and permanent when applied. Location and size of label

FCC ID: QVL-BT817 Page 1 of 4 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B3 PHOTOGRAPHS – TEST SAMPLE INTERIOR FCC ID: QVL-BT817 Page 2 of 4 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B3 PHOTOGRAPHS – TEST SAMPLE INTERIOR FCC ID: QVL-BT817 Page 3 of 4 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B3 PHOTOGRAPHS – TEST SAMPLE INTERIOR FCC ID: QVL-BT817 Page 4 of 4 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B3 PHOTOGRAPHS – TEST SAMPLE INTERIOR

Page 1 of 22 EMC Technologies Pty Ltd ABN 82 057 105 549 Unit 3/87 Station Road Seven Hills NSW 2147 Australia Telephone +61 2 9624 2777 Facsimile +61 2 9838 4050 Email [email protected] www.emctech.com.au Melbourne 57 Assembly Drive Tullamarine Vic 3043 Tel: +61 3 9335 3333 Fax: +61 3 9338 9260 Sydney Unit 3/87 Station Road Seven Hills NSW 2147 Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 Brisbane 1/15 Success Street Acacia Ridge Qld 4110 Tel: +61 7 3875 2455 Fax: +61 7 3875 2466 Auckland (NZ) 47 MacKelvie Street Grey Lynn Auckland Tel: +64 9 360 0862 Fax: +64 9 360 0861 EMI TEST REPORT for CERTIFICATION of FCC PART 15.225 & FCC PART 15.207 TRANSMITTER FCC ID:QVL-BT817 Manufacturer:BQT Solutions Test Sample:Contactless Smartcard Reader Model:BT817 Serial No:None Date:19 th May 2005 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. All samples tested were in good operating condition throughout the entire test program. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, interferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. The tests, calibrations or measurements covered by this document have been performed in accordance with NATA requirements which include the requirements of ISO/IEC 17025 and are traceable to national standards of measurement. This document shall not be reproduced, except in full. NATA Accredited Laboratory Number: 5292 FCC ID: QVL-BT817Report No. T40645_F Page 2 of 22 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 EMI TEST REPORT FOR CERTIFICATION FOR CERTIFICATION OF FCC Part 15.225 & FCC PART 15.207 TRANSMITTER FCC ID: QVL-BT817 EMC Technologies Report No. T40645_F Date: 19 th May 2005 CONTENTS 1. SUMMARY of TEST RESULTS 2. GENERAL INFORMATION 3. CONDUCTED EMI RESULTS 4. RADIATED EMI RESULTS 5. FREQUENCY TOLERANCE 6. CONCLUSION APPENDIX A. MEASUREMENT INSTRUMENTATION DETAILS APPENDIX B. PHOTOGRAPHS APPENDIX C. BLOCK DIAGRAM APPENDIX D. OPERATIONAL DESCRIPTION APPENDIX E. TEST SAMPLE SCHEMATICS APPENDIX F. TEST SAMPLE PCB LAYOUTS APPENDIX G. TEST SAMPLE TEST PLAN APPENDIX H. LABELLING – LOCATION APPENDIX I. GRAPHS of EMI MEASUREMENT APPENDIX J. INSTALLATION (USER) MANUAL FCC ID: QVL-BT817Report No. T40645_F Page 3 of 22 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 EMI TEST REPORT FOR CERTIFICATION OF FCC PART 15.225 & FCC PART 15.207 TRANSMITTER Report Number: T40645_F Test Sample Name: Contactless Smartcard Reader Model Number: BT817 Serial Number: None FCC ID: QVL-BT817 Manufacturer: BQT Solutions Tested For: BQT Solutions Limited Address: Level 4, 65 Epping Road North Ryde NSW 2113 Phone: (02) 8817 2800 Fax: (02) 8817 2811 Responsible Party: Mr Chris Blake Test Standards:FCC Part 15.225 Intentional Radiators FCC Part 15.207 Conducted Limits ANSI C63.4:2003 OET Bulletin No. 65 Test Dates: 16/03/05, 23/05/05 and 26/05/05 Testing Officers: Jodie FoyleBruce Holdsworth Attestation:I hereby certify that the device(s) described herein were tested as described in this report and that the data included is that which was obtained during such testing. Authorised Signature: Les Dickenson Branch Manager EMC Technologies Pty Ltd Issued by EMC Technologies Pty Ltd, Unit 3/87 Station Road, Seven Hills, NSW, 2147, Australia. Phone: +61 2 9624 2777 Fax: +61 2 9838 4050 FCC ID: QVL-BT817Report No. T40645_F Page 4 of 22 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 EMI TEST REPORT FOR CERTIFICATION of FCC PART 15.225 & FCC PART 15.207 TRANSMITTER on the Contactless Smartcard Reader 1. SUMMARY of RESULTS This report details the results of EMI tests and measurements performed on the Contactless Smartcard Reader, Model: BT817, in accordance with the Federal Communications Commission (FCC) regulations as detailed in Title 47 CFR, Part 15 Rules for intentional radiators. All results are detailed in this report. Part 15.31e Amplitude stability with supply variation:Complied Part 15.207 Conducted Emissions:Complied Part 15.225 a, b &c Carrier Signal Field Strength 13.110 – 14.010MHz:Complied Part 15.225 d (15.209) Field Strength Outside 13.110 – 14.010MHz:Complied Part 15.225 e Frequency Tolerance:Complied 2. GENERAL INFORMATION 2.1General Description of Test Sample Manufacturer:BQT Solutions Test Sample:Contactless Smartcard Reader Model:BT817 Serial No:None FCC ID:QVL-BT817 Equipment Type:Intentional Radiator 2.2 Test Sample Functional Description The BQT BT817 is a contactless smartcard reader designed for keyless entry and other personnel identification and entry purposes. The BT817 family of products share a common PCB with the models differing only in their firmware and data interfaces. The BT817-WG and BT817-D models use a pair of open collector drivers to provide a Weigand interface, whilst the 817-PAC uses a single open collector driver to provide a Serial Tx interface. The electrical interfaces are identical except for the placement of a linking resistor that determines the interface type used. The BT817 is powered from a single 12 Volt DC supply and is connected to a generic controller unit for data transfer. Both power supply and data cabling lengths are between 3m and 1200m for a normal installation. FCC ID: QVL-BT817Report No. T40645_F Page 5 of 22 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 2.3 Technical Specifications and System Overview Clock Circuit Speed:MIFARE 13.56MHz ±30ppm MIFARE IF 847.5kHz ±30ppm Processor…

Text truncated - open the document above for the full version.

FCC ID: QVL-BT817 Page 1of 9 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX I GRAPHS of EMI MEASUREMENTS Conducted Emissions: Graph 1: Active Line 0.145 to 30.5 MHz Antenna terminals terminated Graph 2: Neutral Line 0.145 to 30.5 MHz Antenna terminals terminated Graph 3: Active Line 0.145 to 30.5 MHz Antenna terminals connected to antenna Graph 4: Neutral Line0.145 to 30.5 MHz Antenna terminals connected to antenna Radiated Emissions: Graph 5: Ambients0.009 to 30 MHz Graph 6: Carrier13.55 to 13.57 MHz Graph 7: Vertical Polarisation 29 to 1000 MHz Graph 8: Horizontal Polarisation29 to 1000 MHz EMC Technologies Pty. Ltd. - Global Product CertificationFCC Class B Job No:T40645F Test Date: 23/5/05 GRAPH No. 1 p:\PCF\T40645f_1.PCF EMC Technologies (Sydney) 16/6 Gladstone Rd, Castle Hill, NSW, 21 53 , NSW, Australia Phone +(612) 9899 4599 Fax+(612) 9899 4019 BQT Solutions Limited Smart Card Reader Model: BT817 Antenna terminals terminated. Conducted Emissions (dBuV) T40645cx Limits: Legend: Source: _ FCCN_BQP FCC CLASS B QP CONDUCTED LIMITS (CISPR) _ FCCN_BAV FCC CLASS B AV CONDUCTED LIMITS (CISPR) __ Active Line 1 2 3 Ver 5.5 Build 107Generic file for any test. t:L0110705 c1:C0020905 c2:NONE p:NONE a:L0030705Site ID: Syd Room#2, Test Officer:Jodie Foyle Peaks:No Freq Peak Qp Val FCCN_BQP dL1 Av Val FCCN_BAV dL2 (MHz) (dBuV) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dB) 1 0.226 54.4 51.2 62.6 -11.4 39.5 52.6 -13.1 2 0.218 54.7 51.0 62.9 -11.9 32.6 52.9 -20.3 3 0.329 44.0 40.1 59.5 -19.3 25.0 49.5 -24.5 4 0.457 40.1 36.2 56.7 -20.5 26.0 46.7 -20.7 5 2.957 36.6 33.8 56.0 -22.2 18.8 46.0 -27.2 6 0.685 34.1 32.1 56.0 -23.9 20.0 46.0 -26.0 7 0.557 34.8 32.0 56.0 -24.0 16.8 46.0 -29.2 8 0.891 34.8 30.8 56.0 -25.2 13.4 46.0 -32.6 9 1.779 32.5 29.7 56.0 -26.3 15.5 46.0 -30.5 10 1.563 31.8 29.1 56.0 -26.9 12.4 46.0 -33.6 11 1.400 31.6 28.5 56.0 -27.5 13.9 46.0 -32.1 12 0.780 32.7 28.4 56.0 -27.6 11.8 46.0 -34.2 13 13.56 34.3 32.3 60.0 -27.7 32.2 50.0 -17.8 14 22.12 31.0 29.2 60.0 -30.8 29.1 50.0 -20.9 15 0.551 30.2 23.8 56.0 -32.2 9.0 46.0 -37.0 16 1.068 29.9 23.0 56.0 -33.0 10.9 46.0 -35.1 Frequency (MHz) 1 10 .145 30.5 0 10 20 30 40 50 60 70 80 v ^ 1 ~ * v ^ 2 ~ * v ^ 3 ~ * v ^ 4 ~ * v ^ 5 ~ * v ^ 6 ~ * v ^ 7 ~ * v ^ 8 ~ * v ^ 9 ~ * v ^ 10 ~ * v ^ 11 ~ * v ^ 12 ~ * v ^ 13 ~ * v ^ 14 ~ * v ^ 15 ~ * v ^ 16 ~ * EMC Technologies Pty. Ltd. - Global Product CertificationFCC Class B Job No:T40645F Test Date: 23/5/05 GRAPH No. 2 p:\PCF\T40645f_2.PCF EMC Technologies (Sydney) 16/6 Gladstone Rd, Castle Hill, NSW, 2153, NSW, Australia Phone +(612) 9899 4599 Fax+(612) 9899 4019 BQT Solutions Limited Smart Card Reader Model: BT817 Antenna terminals terminated. Conducted Emissions (dBuV) T40645cx Limits: Legend: Source: _ FCCN_BQP FCC CLASS B QP CONDUCTED LIMITS (CISPR) _ FCCN_BAV FCC CLASS B AV CONDUCTED LIMITS (CISPR) __ Neutral Line 4 5 6 Ver 5.5 Build 107Generic file for any test. t:L0110705 c1:C0020905 c2:NONE p:NONE a:L0030705Site ID: Syd Room#2, Test Officer:Jodie Foyle Peaks:No Freq Peak Qp Val FCCN_BQP dL1 Av Val FCCN_BAV dL2 (MHz) (dBuV) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dB) 1 0.232 51.8 48.8 62.4 -13.6 38.6 52.4 -13.8 2 0.335 42.1 38.5 59.3 -20.8 24.5 49.3 -24.8 3 2.721 37.3 34.4 56.0 -21.6 19.5 46.0 -26.5 4 0.468 37.5 33.7 56.5 -22.9 23.0 46.5 -23.5 5 2.973 37.0 32.5 56.0 -23.5 16.8 46.0 -29.2 6 4.271 33.6 30.6 56.0 -25.4 16.3 46.0 -29.7 7 1.776 33.4 30.3 56.0 -25.7 16.1 46.0 -29.9 8 2.382 34.2 29.3 56.0 -26.7 14.1 46.0 -31.9 9 1.563 32.3 29.1 56.0 -26.9 11.9 46.0 -34.1 10 2.142 32.6 29.0 56.0 -27.0 14.6 46.0 -31.4 11 1.935 31.7 28.6 56.0 -27.4 31.5 46.0 -14.5 12 13.56 34.2 32.3 60.0 -27.7 32.3 50.0 -17.7 13 0.559 31.1 27.7 56.0 -28.3 13.4 46.0 -32.6 14 1.439 32.6 26.0 56.0 -30.0 8.9 46.0 -37.1 15 0.783 27.7 23.7 56.0 -32.3 9.7 46.0 -36.3 16 0.694 28.7 23.3 56.0 -32.7 12.5 46.0 -33.5 Frequency (MHz) 1 10 .145 30.5 0 10 20 30 40 50 60 70 80 v ^ 1 ~ * v ^ 2 ~ * v ^ 3 ~ * v ^ 4 ~ * v ^ 5 ~ * v ^ 6 ~ * v ^ 7 ~ * v ^ 8 ~ * v ^ 9 ~ * v ^ 10 ~ * v ^ 11 ~ * v ^ 12 ~ * v ^ 13 ~ * v ^ 14 ~ * v ^ 15 ~ * v ^ 16 ~ * EMC Technologies Pty. Ltd. - Global Product CertificationFCC Class B Job No:T40645F Test Date: 26/5/05 GRAPH No. 3 p:\PCF\T40645f_3.PCF EMC Technologies (Sydney) 16/6 Gladstone Rd, Castle Hill, NSW, 2153, NSW, Australia Phone +(612) 9899 4599 Fax+(612) 9899 4019 BQT Solutions Limited Smart Card Reader Model: BT817 Antenna terminals connected to antenna. Conducted Emissions (dBuV) T40645cx Limits: Legend: Source: _ FCCN_BQP FCC CLASS B QP CONDUCTED LIMITS (CISPR) _ FCCN_BAV FCC CLASS B AV CONDUCTED LIMITS (CISPR) __ Active Line 7 8 9 Ver 5.5 Build 107Generic file for any test. t:L0110306 c1:C0020905 c2:NONE p:NONE a:L0030705Site ID: Syd Room#2,Test Officer:Jodie Foyle Peaks:No Freq Peak Qp Val FCCN_BQP dL1 Av Val FCCN_BAV dL2 (MHz) (dBuV) (dBuV) (dBuV) (dB) (dBuV) (dBuV) (dB) 1 0.171 59.6 56.4 64.9 -8.5 50.5 54.9 -4.4 2 13.56 43.9 43.8 60.0 -16.2 43.9 50.0 -6.1 3 0.360 44.1 41.1 58.7 -17.6 35.8 48.7 -12.9 4 0.347 44.8 41.3 59.0 -17.7 35.7 49.0 -13.3 5 0.541 36.8 33.8 56.0 -22.2 32.4 46.0 -13.6 6 0.520 37.3 33.9 56.0 -22.1 31.0 46.0 -15.0 7 0.699 32.8 29.9 56.0 -26.1 26.5 46.0 -19.5 8 22.12 30.2 30.4 60.0 -29.6 30.2 50.0 -19.8 9 0.725 32.8 29.5 56.0 -26.5 23.8 46.0 -22.2 10 0.165 58.9 41.5 65.2 -23.7 30.4 55.2 -24.8 11 1.079 28.8 22.4 56.0 -33.6 18.6 46.0 -27.4 12 1.043 30.3 22.8 56.0 -33.2 17.6 46.0 -28.4 13 0.869 30.3 21.9 56.0 -34.1 17.6 46.0 -28.4 14 0.902 28.6 20.6 56.0 -35.4 16.8 46.0 -29.2 15 2.876 30.0 26.8 56.0 -29.2 16.1 46.0 -29.9 16 2.769 30.7 26.2 56.0 -29.8 12.8 46.0 -33.2 Frequency (MHz) 1 10 .145 30.5 0 10 20 30 40 50 60 70 80 v ^ 1 ~ * v ^ 2 ~ * v ^ 3 ~ * v ^ 4 ~ * v ^ 5 ~ * v ^ 6 ~ * v ^ 7 ~ * v ^ 8 ~ * v ^ 9 ~ * v ^ 10 ~ * v ^ 11 ~ * v ^ 12 ~ * v ^ 13 ~ * v ^ 14 ~ * v ^ 15 ~ * v ^ 16 ~ * EMC Technologies Pty. Ltd. - Global Product CertificationFCC Class B Job No:T40645F Test Date: 26/5/05 GRAPH No. 4 p:\PCF\T40645f_4.PC…

Text truncated - open the document above for the full version.

FCC ID: QVL-BT817 Page 1 of 2 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B1 PHOTOGRAPHS – TEST SETUP Conducted Emissions FCC ID: QVL-BT817 Page 2 of 2 EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 APPENDIX B1 PHOTOGRAPHS – TEST SETUP Radiated Emissions