QVY58PMio ALPHA 2

WARRANTY & REGULATIONS 2 3 WARRANTY ENGLISH .......................................................................................................4 FRANÇAIS ....................................................................................................7 DEUTSCH ...................................................................................................10 NEDERLANDS.............................................................................................13 ESPAÑOL ....................................................................................................16 ITALIANO ....................................................................................................19 PORTUGUÊS ..............................................................................................22 SVENSKA ...................................................................................................25 TÜRKÇE ......................................................................................................28 中文(繁體) ...............................................................................................31 中文(简体) ..............................................................................................34 日本語 ......................................................................................................37 한국의 .......................................................................................................40 REG ULATION S EUROPEAN UNION .....................................................................................43 USA ...........................................................................................................46 CANADA ....................................................................................................48 AUSTRALIA & NEW ZEALAND ....................................................................49 TAIWAN .....................................................................................................50 4 WARRANTY & SERVICE Be sure to visit our Product Support pages to find online help, FAQs, Videos, and Manuals for your product: mioglobal.com/support Mio Limited Warranty Information This product is warranted to the original purchaser to be free from defects of quality, materials or workmanship at the time of delivery for the Limited Warranty Period (see below). During the Limited Warranty Period, Physical Enterprises Inc. (Mio Global) will, at its sole discretion, remedy such defects free of charge either by a) repairing, or b) replacing, or c) refunding the original purchase price (excluding taxes, shipping, handling, duties, and similar amounts), subject to the terms and conditions of this Limited Warranty. Processing of all warranty claims will be handled by the distributor of the product for the geographic area where the original purchase was made. To obtain warranty service, contact the store/dealer where the product was purchased to make a warranty claim. Warranty Period The “Limited Warranty Period” starts on the date of purchase and lasts for one year, ending on the first anniversary of the date of purchase. Your store/dealer (or its importer or distributor) may have offered you a longer warranty period as part of the sale; Mio Global is not responsible for such longer warranty period so please contact your store/dealer for more information. The Limited Warranty Period will automatically expire without notice, and this Limited Warranty is not enforceable, if (as determined at the sole discretion of Mio Global): 1. the product has been opened or otherwise tampered with (except where permitted by the relevant documentation, such as to properly replace batteries as instructed); 2. the product has been serviced by a person other than Mio Global; 3. the serial number has been removed, altered or made illegible in any way; or 4. the product was not purchased from an authorized reseller of Mio Global (please contact Mio Global to obtain a list of autho- rized resellers). Please refer to mioglobal.com/support for country-specific warranty information. Exclusions and Limitations This Limited Warranty does not cover, and customers will not be entitled to any claim under this Limited Warranty or otherwise for: 1. problems arising from abuse or rough, careless, or improper handling (and without limiting the foregoing, damage resulting from bending or dropping the product will be deemed the result of abuse or improper use); WARRANTY – ENGLISH 5 2. problems arising from misuse contrary to intended or recommended use; 3. problems arising from alteration of the Mio product, such as moisture or water damage sufficient to affect the proper function of the product, and damage to the product case or visible cracking of the face; 4. problems arising from the use of the Mio product with any product, accessory, software and/or service not manufactured or supplied by Mio Global; or 5. replaceable batteries, or user manuals or any third-party items; in each case as determined at the sole discretion of Mio Global. Exclusions and limitations of liability; disclaimers This limited warranty is only valid and enforceable in the country of purchase. To the maximum extent permitted by applicable, mandatory laws: 1. This limited warranty is your sole and exclusive remedy and is in lieu of all other warranties, representations, guarantees or conditions, whether expressed or implied; 2. Neither this limited warranty, nor any other warranty, guarantee, representation or condi- tion, including any implied warranty and con- dition (whether for merchantability or fitness for a particular purpose, or otherwise), will extend beyond the limited warranty period; 3. Mio global, or any of its affiliates or their respective employees, officers, directors, representatives and agents (collectively, the “physical entities”), shall not be liable for special, incidental, punitive, indirect or consequential damages, including but not limited to loss of anticipated …

Text truncated - open the document above for the full version.

QUICK START GUIDE Set up your heart rate zones and register for product updates DOWNLOAD THE MIO GO APP Through Mio GO, you can: • Set up your user profile and preferences • Configure your heart rate zones • Customize your display screens and alerts • Register for product updates QUICK START GUIDE ENGLISH...........................................................................6 FRANÇAIS ......................................................................10 DEUTSCH ........................................................................14 NEDERLANDS ..................................................................18 ESPAÑOL ........................................................................22 ITALIANO .......................................................................26 PORTUGUÊS ..................................................................30 SVENSKA .......................................................................34 TÜRKÇE ..........................................................................38 中文(繁體) ......................................................................42 中文(简体) ......................................................................46 日本語 ...........................................................................50 한국의 .............................................................................54 6 WELCOME To download the Complete User Guide, get important battery care information, and register your Mio ALPHA, visit: mioglobal.com/support. MIO ALPHA A. Left Button B. Right Button C. Heart Rate (HR) Indicator Light ENGLISH BA C 7 GETTING STARTED Press and hold any button to activate your Mio ALPHA. Mio ALPHA will prompt you to set the date and time, then to enter your weight, height, gender, and year of birth. Press B to increase or change the displayed value. Press A to confirm and proceed. YOUR FIRST WORKOUT 1. Fasten Mio ALPHA snugly on your forearm. 2. Press and hold B to enter Workout Mode. Hold your arm still while Mio ALPHA searches for your heart rate. If you see displayed, Mio ALPHA was unable to find your heart rate. Please refer to the Complete User Guide for troubleshooting suggestions (mioglobal.com/support). To log your workout data and start the timer, press B . To take a lap time, press B . To pause or stop the timer, press and hold B . Press B again to resume the timer, or, press and hold B to exit Workout Mode. Press A at any time to review the data of your current or most recent workout. ENGLISH 8 BACKLIGHT Double tap the display at any time to activate the backlight. CHARGING 1. Make sure your Mio ALPHA and USB charger are completely dry. 2. Plug the USB charger into the USB port of your computer. 3. Align the charging pins on the back of Mio ALPHA to the charging pins on the USB charger. For further information, refer to the illustrated sheet that comes in the box. HEART RATE ZONES During Workout Mode, the HR Indicator light provides feedback on your heart rate. Choose between Training Zone Mode (5-Zone) or Zone Alert Mode (1-Zone). The default mode is Training Zone Mode. Switch between modes by holding A in Workout Mode, or by using the Mio GO app. ENGLISH 9 DATA STORAGE AND TRANSFER Mio ALPHA can store up to 24 hours of workout data. Use the Mio GO app to automatically upload your data to a compatible smartphone or tablet through Bluetooth Smart (4.0) wireless technology. For a list of compatible devices and apps, please visit mioglobal.com/apps. IMPORTANT SAFETY INFORMATION Consult your doctor before beginning a new exercise program. The Mio ALPHA and USB charger contain strong magnets. If you use a pacemaker, defibrillator, or other implanted electronic devices, consult your doctor before using a Mio ALPHA. For detailed instructions or questions about your Mio ALPHA, please visit mioglobal.com/support. ENGLISH 10 SALUTE Pour télécharger le guide d’utilisateur complet, consulter des informations sur l’entretien des piles et enregistrer votre Mio ALPHA, visitez: mioglobal.com/support. MIO ALPHA FRANÇAIS A. Bouton gauche B. Bouton droit C. Voyant témoin de la fréquence cardiaque (FC) BA C 11 PRISE EN MAIN Appuyez sur n’importe quel bouton et maintenez-le enfoncé pour allumer votre Mio ALPHA. La montre Mio ALPHA vous invitera à régler la date et l’heure, puis à saisir votre poids, votre taille, votre sexe et votre année de naissance. Appuyez sur A pour augmenter ou modifier la valeur affichée. Appuyez sur B pour confirmer et continuer. VOTRE PREMIÈRE SÉANCE 1. Fixez votre Mio ALPHA sur votre avant-bras sans trop serrer. 2. Appuyez sur B et maintenez le bouton enfoncé pour activer le mode “Entraînement.” Il est important que votre bras reste immobile pendant que la Mio ALPHA recherche votre fréquence cardiaque. Si vous voyez le symbole s’afficher, cela signifie que la Mio ALPHA n’a pas pu détecter votre fréquence cardiaque. Veuillez vous reporter au manuel d’utilisation complet pour trouver des solutions de dépannage (mioglobal.com/support). Pour enregistrer les données de votre sortie et démarrer le chronomètre, appuyez sur B . FRANÇAIS 12 Pour chronométrer un tour, appuyez sur B . Pour arrêter ou suspendre le chronomètre, appuyez sur B et maintenez le bouton enfoncé. Appuyez de nouveau sur B pour redémarrer le chronomètre ou appuyez sur ce même bouton et maintenez-le enfoncé pour quitter le mode Entraînement. Appuyez sur A à tout instant pour revoir les données de votre sortie actuelle ou de la précédente. RÉTRO-ÉCLAIRAGE Appuyez deux fois sur l’écran à tout instant pour activer le rétro-éclairage. CHARGEMENT 1. Assurez-vous que la Mio ALPHA et le chargeur USB sont entièrement secs. 2. Branchez le chargeur USB au port USB de votre ordinateur. 3. Raccordez les électrodes de charge, situées au dos de la Mio ALPHA, aux fiches du chargeur USB. Reportez-vous à la fiche d’illustrations fournie dans la boîte pour en savoir plus. ZONES DE FRÉQUENCE CARDIAQUE Dans le mode “entraînement”, le voyant témoin de FC vous indique votre …

Text truncated - open the document above for the full version.

1 Photographs - EUT Constructional Details Test model No.:58P

1 Photographs - EUT Constructional Details Test model No.:58P

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140900537702 Page: 1 of 6 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1409005377RF Applicant: Physical Enterprises Inc Manufacturer: IDT Technology Limited Factory: Physical Enterprises Inc Product Name: Mio ALPHA 2 Model No.(EUT): 58P FCC ID: QVY58P Standards: 47 CFR Part 1.1307(2013) 47 CFR Part 2.1093 (2013) KDB447498D01 General RF Exposure Guidance v05 Date of Receipt: 2014-09-30 Date of Test: 2014-10-08 to 2014-10-13 Date of Issue: 2014-10-14 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140900537702 Page: 2 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-10-14 Original Authorized for issue by: Tested By 2014-10-13 (Apple Sun) /Project Engineer Date Prepared By 2014-10-14 (Link Liang) /Clerk Date Checked By 2014-10-18 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM140900537702 Page: 3 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Contents Page 1 COVER PAGE ..........................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM140900537701 Page: 1 of 48 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1409005377RF Applicant: Physical Enterprises Inc Manufacturer: IDT Technology Limited Factory: Physical Enterprises Inc Product Name: Mio ALPHA 2 Model No.(EUT): 58P Trade Mark: Mio FCC ID: QVY58P Standards: 47 CFR Part 15, Subpart C (2013) Date of Receipt: 2014-09-30 Date of Test: 2014-10-08 to 2014-10-13 Date of Issue: 2014-10-14 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM140900537701 Page: 2 of 48 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-10-14 Original Authorized for issue by: Tested By 2014-10-13 (Apple Sun) /Project Engineer Date Prepared By 2014-10-14 (Link Liang) /Clerk Date Checked By 2014-10-18 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM140900537701 Page: 3 of 48 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2009 PASS AC Power Line Conducted Emission 47 CFR Part 15, S…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.:58P 1.1 Radiated Emission