QWWFG-BT-0803GPS Handheld Bluetooth

GPSmart Manual Main Function Introduction 1 SATELLITES 2 POSITION 3 NAVIGATION 4 ROUTE 5 GO TO 6 MAP 7 AREA ALCULATE 8 DATA BASE 9 SETUP ( 10) BLUETOOTH (Only for Bluetooth version) Attention: Bluetooth item of operation is only for Bluetooth version. Bluetooth version Without Bluetooth version The operation mode and instruction. The mode has four buttons. Power: Power switch. Back light button: Use it at night or darkness. Enter button: Enter function. Up: Up Down: Down. Instruction of main function After pushing power, it will display company logo. Then push next or enter, it will turn to main function. Step 1: Satellite Distribution: Step 2: Display Route. Step 3: Route Function Step 4: Manu Selection Press up or down button for continuing three times, it will turn into main function. Satellite Distribution=> User’s Movement=> Map Function=>Menu Turn off power switch as long as push power again. (1) Satellite Distribution and Satellite Intensity In the menu, pressing the next and choosing “ SATELLITES”. Then, the screen will display satellite distribution and single intensity. As long as pushing enter again, it will come back to main function. The function only indicates satellite signal condition. => Satellite Distribution The two circle of above half screen is satellite distribution. There are two circles of the graph; the big one indicates horizon and the other indicates to turn upward 45 degree. The center indicates zenith, such as ninety degree of elevation. There is an “N” in the big circle side; it indicates the North. There are several squares of the big circle; they indicate satellites. The inner number of squares is satellite serial number. The low part of the screen is satellite single intensity display. The left value indicates satellite serial number. Right value indicates satellite intensity. Attention item: 1. After turn on the machine, if satellites gather in “N” indicate unlock. You must wait until “2D” or “3D” on the up right screen. 2. Sometimes you may find satellite distribution amount is different from satellite intensity for over two satellites location are near, so it overlap. Therefore, satellite distribution amount is usually less than satellite intensity. (2) Position, time and height display at present. In the main function, pushing option to “ Position”, then pushing select, the screen will change. The function let user know their location, height, time and satellite lock situation. => Position 2-1 The square of screen indicates position at present. There are four items of Latitude. The first means north latitude and south latitude. The second, third, and forth are degreeminute and second. One degree= 60 minutes, One minute= 60 seconds. The coordinate system value is WGS84 (GPS) or GSR80 (TWD97). Please pay attention if you use another map. 2-2 Fix user’s position status as follow: GPS : SEARCHING => user’s position not fixed GPS : 2D FIX => 2 dimensional fix user’s position GPS : 3D FIX => 3 dimensional fix user’s position 2-3 Altitude means length from sea level to position at the present. The unit is meter. Push up or down can change to ft. 2-4 Local Time means Greenwich Mean Time add time zone offset. Others area code can adjust from main function “SETUP”. 2-5 Speed indicates moving speed. The unit is KM/ H and MI/ H selectable. (3)Display Navigation The function indicates the North direction and general information. 3-1. As follow => 3-2.Select Function 3-2-1 Push up or down bottom to select "SPEED"," LOCATION"," LOCAL TIME"," ALTITUDE" and "ELAPSE". Speed<=>Position<=> Altitude<=> Local Time<=>Elapse <=>Return “Speed”. 3-2-2 It provides different choices depend on function. Speed: Change speed unit to MI/H <-> KM/H Exit => Now Position Change location unit to degree <-> degreeminute and second. Exit => LatitudeChange latitude unit to FT <-> M => Local Time Change time unit to 24 H <-> 12 H Exit => Elapse Record item ; START,CLEAR <=> STOP Exit ; => Or => 4Display Route The function can record your route point, when you go to uncertain place. After you arrive at destination, it can guide user come back to the starting place. => 4-1. 4-1 Operation of Route => Select route file and enter it, it will display sub selections. #### =====> => The sub selections are: A.SELECT Select route. B.RENAME Rename route name. C.DELETE Delete route data. D.CANCEL Cancel and select another route. The 20 set of route are available. There are four pages, and each page has 5 sets. Attention: The 20 set route can use area calculate function. 4-2 Trace => 4-2-1.Display-route trace. 4-2-2 Push up or down button can change scale. 4-2-3.Push enter button to exit and return to “Route” function. => 4-3 Route View Mode Use the function to view past route trace. 4-3-1 Select route view item 4-3-2 Set route dots of “EVERY STEP” 4-3-3 Display Trace It will add trace dots as long as you push up down button. It will delete trace dots as long as you push up button. Because the screen use trace point as central point, user’s position may beyond range. If user beyond range, it will use triangle to indicate user’s position. As fellow, user stands on right side of triangle and the distance is uncertain. => 4-3-4 View Option => 4-4 Set Time Interval It indicates time interval of route. Ten seconds => Thirty seconds => One minute => Five minutes => Ten minutes => Thirty minutes => Ten seconds => 4-5 Start Record After enter “ START REC”, you can view moving direction and route. => 4-5-1. After you push “START REC” item, it will start to record. It can view your moving direction and your route. 4-5-2.Push up or down button can view user’s information, for example, now position, time and recording time. Position Altitude Speed Local Time Elapse 4-5-3. [ ] 4-5-3 Push enter to sub selection, you can choose “CONTINUE”, “ZOOM IN”, “ ZOOM OUT”, “ ADD WAY PT”, “ELAPSE” AND “ STOP”. Continue Zoom in Zoom out Add Way Point Turn on Elapse Turn off Elapse Delete Elapse Stop “ADD WAY PT.” operation mode i…

Text truncated - open the document above for the full version.

External Photo

Label Location and Label sample 25mm 45mm

Internal Photos

BLUETOOTH MODULE 1. InterfaceUSB/UART/PCM 2. output power +0dBm max 3. working distance10meter 4. Frequency band2.4GHz unlicensed ISM band 5. ModulationGFSK (Gaussian Frequency Shift Keying) 6. Connection modeActive, Hold, Sniff, Park 7. DC power3.3 ~ 3.6V 8. Sensitivity-80dBm @ 0.1BER 9. Data rate723K bps(max.) 10. Link modeACL and SCO link GPS MODULE GPS RF FRONT END GRF2i/LP PRELIMINARY GPS RF Sirf StarII z High speed signal acquisition using 1920 time/frequency search channels z Wide Area Augmentation System (WAAS) and NDGPS/U.S. Coast Guard Beacon support z Satellite signal-tracking engine for GPS acquisition and tracking functions without CPU intervention z Cold start under 45 seconds Maximizes GPS Position Availability z SingleSat updates in reduced visibility z Superior urban canyon performance z FoliageLock for weak signal tracking Cost Effective RFIC Integration z Built-in IF Filter z Integrated LNA z On-Chip VCO and Reference Oscillator z Single-stage L1 to IF Downconversion z External +/-25 ppm Reference Crystal z Power control eliminates the need for CPU crystal in TricklePower mode Seamless Interface to GSP2e Family z Standard 3.3V supply z Compatible with Standard Active Antennas z LQFP48 Package ( 7 * 7mm ) z Separate RF and Clock Power down mode z Simplified interface connections Maximum Performance z On-Chip 2-Bit A/D z Improved Jam Immunity z Low Overall NF GPS ENGINE PROCESSOR GPS 2e/LP PRELIMINARY SiRFstarII Architecture z Advanced TricklePower mode for power savings up to 98% with no extra parts z Extreme low power in power-down mode, but capable of very fast starts Maximizes GPS Position Availability z SingleSat updates in reduced visibility z Superior urban canyon performance z FoliageLock for weak signal tracking GPS2e Product Highlights Highly Integrated Digital IC z Enhanced SiRFstarII GPS core z Integrated ARM7TDMI TM up to 50 MHz z Support 8-, 16-, and 32-bit data bus operation z Separate internal and external buses z On-chip 1 Mb EDO DRAM for GPS navigation z Instruction cache to improve throughput z Integrated high-precision Real-Time Clock z Extensive GPS peripherals 2 UARTS, synchronous serial bus, battery-backed SRAM, and >40 GPIO z QFP and BGA packaging options High Quality z 99% effective fault coverage z End-to-end simulation z ARM7TDMI with JTAG interface z Memory with Built-In Self-Test(BIST) Compute Power for User Applications z Up to 90% CPU throughput available for user tasks z Robust development environment LED BACKLIGHT Absolute Maximum Rating Parameter Rating Unit Remark Forward Current 240 mA Reverse Voltage 5 V I R =10uA Power Dissipation 0.55 W Operating Temperature -20 ~ +70 0 C Storage Temperature -30 ~ +80 0 C Soldering Temperature 260 0 C 5sec. MAXIMUM ABSOLUTE VALUES ITEM SYMBOL MIN Max UNITS Operating temperature Top -20 +70 0 C Storage temperature Tst -30 +80 0 C Supply voltage for logic VDD -0.3 +7.0 V Supply voltage for LCD driving V 0 -0.3 +17 V

Digital DIGITAL_11.1 GPS_DIGITAL_1 C Title SizeDocument NumberRev 14Tuesday, February 18, 2003 Date:Sheet of VCC VCC RF-VCC VCC VCC VCC VCC VCC VCC ANT-VCC VCC VCC VCC VCC VPP EIT0N GPIO5 MWEN MOEN MWEN MOEN EIT0N RSTN CS0N CS0N CS1 RSTN MWEN MOEN RFPC0 RSTN GPIO5 GPIO7 CS3 TXDA0 CS1 RXDA0 RFPC1 BOOTSEL BOOTSEL GPIO6 RFPC0 RFPC1 GPIO6 EN_BLUETOOTH A D R [ 1: 20] D A T A [ 0 . . 1 5 ] A D R [ 1. . 20] A D R [ 1. . 20] ADR[1..20]ADR[1..20]ADR[1..20] D A T A [ 0 . . 1 5 ] DA T A [0 ..1 5 ] DA T A [0 ..1 5 ] DATA1 ADR11 ADR19 ADR2 DATA3 ADR14 DATA0 ADR2 ADR16 DATA8 DATA2 DATA11 ADR5 ADR9 DATA6 ADR8 ADR6 DATA14 ADR20 DATA14 ADR3 ADR16 SDI ADR13 ADR12 ADR9 ADR12 MOEN DATA15 DATA13 ADR11 ADR14 BCNCTL DATA1 ADR4 ADR14 DATA0 DATA6 DATA4 ADR18 MWEN ADR2 ADR1 ADR1 ADR3 ADR6 DATA13 ADR17 ADR19 DATA4 DATA12 DATA7 MOEN DATA4 ADR6 ADR7 ADR17 DATA8 MOEN ADR20 ADR12 ADR7 DATA7 DATA6 DATA15 ADR10 ADR3 ADR15 DATA3DATA15 ADR20 DATA1 DATA2 ADR4 ADR8 ADR15 ADR11 ADR8 ADR5 DATA7 CS0N DATA12 ADR19 MWEN DAC CS_n ADR1 CS0N ADR9 ADR10 ADR7 DATA10 DATA2 DATA11 MWEN DATA7 DATA8 ADR10 ADR18 DATA9 ADR5 DATA9 DATA10 ADR13 ADR13 ADR17 ADR16 DATA8 ADR15 ADR4 ADR18 CS1 DATA3 DATA5 DATA5 DATA5 RSTN RSTN DATA9 DATA10 DATA11 DATA12 DATA13 DATA14 DATA15 SYS_RESET DATA0 DATA0 +C5 10UF/CASE A R13 1KΩ/0603 C11 18PF/0603 R11 10MΩ/0603 Y1 32.768KMC146 1 4 3 2 R3 100Ω/0603 U3 GSP2e/LP-7450 58 60 62 64 67 70 72 74 59 61 63 65 68 71 73 29 28 27 26 18 16 15 10 9 8 7 6 5 4 2 1 14 13 51 57 94 84 86 82 80 83 78 77 76 98 97 95 46 45 44 43 42 47 38 37 40 39 54 53 52 100 49 48 90 88 92 93 89 11 99 36 34 33 32 17 21 23 24 25 35 50 56 69 79 87 81 3 12 19 20 22 41 66 85 91 96 75 30 31 55 ED0 ED1 ED2 ED3 ED4 ED5 ED6 ED7 ED8 ED9 ED10 ED11 ED12 ED13 ED14 EA2 EA3 EA4 EA5 EA6 EA7 EA8 EA9 EA10 EA11 EA12 EA13 EA14 EA15 EA16 EA17 EA18 EA19 MWE MOE SRESET MAG SIGN CLKACQ CLKGPS PECLREF GPIO3 AGCDAT GPIO4 ROUT RIN RTCRST EIT0N SK SI SO TIMEMARK PWRCTL RXB TXB RXA TXA CS1 CS2 CS3 WAKEUP DBGRQ DBGEN JTRST JTDI JTMS JTCK JTDO TMBIST TMODE MUL0 MUL1 SCLK ECLK GN D GN D GN D GN D GN D GN D GN D GN D GN D GN D GN D GN D VD D VD D VD D VD D VD D VD D VD D VD D VD D V DDRT C ED15 EA1 EA0 ROMCS0 C20 0.01UF/0603 C7 12PF/0603 C19 0.01UF/0603 U4 SST39VF400A 45 43 41 39 36 34 32 30 44 42 40 15 47 12 11 26 28 17 48 2 3 4 5 6 7 8 18 19 20 21 22 23 24 25 38 35 33 31 29 27 46 37 1 16 9 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 RY/BSY BYTE RES WE CE OE A17 A16 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 D4 D3 D2 D1 D0 VSS1VSS2 VC C A15 A18 A19 R4 5.1KΩ/0603 R14 100KΩ/0603 R17 10KΩ/0603 D5 HSMA4004/SMA 1 2 B1 BATTERY_2.54 1 2 D3 HSMA4004/SMA 1 2 D2 HSMA4004/SMA 1 2 SW2 EVQPUD02K 1 3 +C3 2.2UF/CASE A SW1 EVQPUD02K 1 3 +C2 2.2UF/CASE A C1 0.01UF/0603 R12 68KΩ/0603 + C4 1UF/CASE A C6 1NPF/0603 R2 0Ω/0603 C9 0.01UF/0603 U2 SST39VF400A 45 43 41 39 36 34 32 30 44 42 40 15 47 12 11 26 28 17 48 2 3 4 5 6 7 8 18 19 20 21 22 23 24 25 38 35 33 31 29 27 46 37 1 16 9 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 RY/BSY BYTE RES WE CE OE A17 A16 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0 D4 D3 D2 D1 D0 VSS1VSS2 VC C A15 A18 A19 U1 AME8801MEEV 1 2 5 4 3 IN GN D OUT BYPEN J4 CON2/DIP 1 2 D1 RB705D/SMD3 1 3 2 R10 180KΩ/0603 J3 CON4/DIP 1 2 3 4 R16 270Ω/0603 R18 100Ω/0603 R9 2.2KΩ/0603 C8 0.01UF/0603 C15 0.01UF/0603 R768KΩ/0603 J2 CON2/DIP 1 2 J1 CON8/DIP 1 2 3 4 5 6 7 8 SIGNBIT MAGBIT PECLREF ACQCLK GPSCLK AGCDAT RFPC1 GND C18 0.01UF/0603 R668KΩ/0603 R19 10KΩ/0603 R568KΩ/0603 R868KΩ/0603 C10 33PF/0603 U5 MAX809SN232T1 3 2 1 VC C RSTN GN D C16 0.1UF/0603 C14 0.1UF/0603 R10Ω/0603 C13 0.01UF/0603 + C12 22UF/CASE B SW3 EVQPUD02K 1 3 C17 0.1UF/0603 D4 HSMA4004/SMA 1 2 R15 100KΩ/0603 DATA[0..15] RTC Layout critical Try to keep high speed lines away _J2 -U3_GSP2e-7400 Configuration Jumpers LOW_POWER 0Ω LCM LCM_21.1 GPS_LCM_2 A 24Tuesday, February 18, 2003 Title SizeDocument NumberRev Date:Sheet of VCC VCC VCC CS3GPIO7 RSTN MOEN MWEN DATA[0..15] DAT A 6 DAT A 3 DAT A 2 DAT A 1 DAT A 7 DAT A 4 DAT A 5 DAT A 0 U6 6212-28PIN 12345678910111213141617192726232221252418202815 V4V3V2V1V0C2-C2+C1-C1+C3-C3+VOUTVDD(3V~ 3 . 3 V) VSS(GND)DB7DB6DB4/RESETRS(A0)DB0DB1DB2R/ W EDB5DB3/C S1 MI R20 0Ω/0603 + C28 1UF/CASE A + C22 1UF/CASE A + C21 1UF/CASE A + C29 1UF/CASE A + C25 1UF/CASE A + C24 1UF/CASE A + C23 1UF/CASE A + C26 1UF/CASE A + C27 1UF/CASE A DATA[0..15] 0Ω1UF 1UF0Ω Power MAIN_31.1 GPS_MAIN_3 A Title SizeDocument NumberRev 34Tuesday, February 18, 2003Date:Sheetof VOUT ANT-VCC RF-VCC VCC VPP VPP VPP VOUT VOUT VOUT VPP VRS232 VPP VDD VDD VRS232 VPP BATTERY VPPVCC RXDA0 TXDA0 EN_SHUTDOWN EN_SHUTDOWN C32 0.1UF/0603 J8 USB5PINSMD 1 2 3 4 5 +C31 10UF/CASE A R23 680Ω/0603 J10 CON5/ 1 2 3 4 5 J9 CON5/ 1 2 3 4 5 J11 CON5/ 1 2 3 4 5 U9 XC61CC3002MR 1 2 3 VOUT VSS VIN Z1 CON1/ 1 Z2 CON1/ 1 SW5 EVQPUD02K 24 C39 1NPF/0603 + C37 1UF/CASE A + C38 2.2UF/CASE A R26 1KΩ/0603 R24 680Ω/0603 + C33 10UF/CASE A U7B 74HC74/SO14 12 11 9 8 10 13 D CLK Q Q PR CL + C30 10UF/CASE A R22 680Ω/0603 SW4 EVQPUD02K 13 D7 ZHCS1000/SOT23 R25 1KΩ/0603 + C36 22UF/CASE B +C40 22UF/CASE B C35 12PF/0603 J6 LEDBACKLIGHT 1 2 C34 0.01UF/0603 J5 CON1/ 1 J7 CON1/ 1 R21 100Ω/0603 D8 HSMA4004/SMA 12 D9 LT0373-41/DIP D6 HSMA4004/SMA 12 Q1 HMBT3904 2 1 3 U8 AME8801JEEV 1 2 5 43 IN GN D OUT BYPEN U7A 74HC74/SO14 2 3 5 6 4 1 D CLK Q Q PR CL RS232 RS232<RevCode> GPS_RS232 A 55Friday, September 13, 2002 Title SizeDocument NumberRev Date:Sheet of VCC-T VCC-T VRS232 VRS232 USB USB TXDA-T RXDA-T RXDA0-T TXDA0-T RXDA-T TXDA-T TXDA-T RXDA-T RXDA0-T TXDA0-T C105 12PF C106 0.1UF 12 U101A sp3232eey 1 2 3 4 5 6 7 89 10 11 12 13 14 15 16 c1+ cv+ c1- c2+ c2- cv- t2-out r2-inr2-out t2-in t1-in r1-out r1-in t1-out gnd vcc C104 12PF C103 0.01UF 12 C107 0.1UF 1 2 C101 0.1UF 1 2 C102 0.1UF 12 J102 CON5_USB 1 2 3 4 5 J101 CON6_MINI_USB 1 2 3 4 5 6 USB USB<RevCode> GPS_USB A 45Friday, September 13, 2002 Title SizeDocument NumberRev Date:Sheet of UVDD UVDD UVDD VBUS D+ D- RXDA0 GND_USB TXDA0 GND_USB D- D+ VBUS RXDA0 TXDA0 J11 CON6_MINI_USB 1 2 3 4 5 6 JP1 CON5_USB 1 2 3 4…

Text truncated - open the document above for the full version.

Report No. : ER/2003/10008 Page : 1 of 32 FCC TEST REPORT quipment Under Test : GPS-HANDHELD-BLUETOOTH Model No. : GPSmartBT Applicant : Fortuna Electronic Corp. 3F,No 9,Sec.1,Chang An East Rd., Taipei, Taiwan, R.O.C. Address of Applicant : Standards: FCC Part 15 subpart C In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan E&E Services or testing done by SGS Taiwan E&E Services in connection with distribution or use of the product described in this report must be approved by SGS Taiwan E&E Services in writing. Tested by : Alex Lee Date : Feb. 27,2003 Approved by : Jason Lin Date : Feb. 27,2003 Report No. : ER/2003/10008 Page : 2 of 32 Contents 1. General Information 1.1 Testing Laboratory 3 1.2 Details of Applicant 3 1.3 Description of EUT(s) 3 1.4 Operation Procedure 4 2. Summary of Results 5 3. Instruments List 6 4. Measurements 7 4.1 Conducted Limits 7 4.2 Radiated emission Limits, general requirement 9 4.3 Channel Spacing 14 4.4 20db bandwidth / No. of channels 16 4.5 Average time of Occupancy 22 4.6 Peak output power 24 4.7 Band-edge emission 26 4.8 Spurious Emission under 25Ghz 28 APPENDIX Photographs of Test Setup 32 Photographs of EUT 33-34 Report No. : ER/2003/10008 Page : 3 of 32 1. General Information 1.1 Testing Laboratory SGS Taiwan Ltd. ( FCC Registration number: 573967 ) 1F, No. 134, Wukung Road, Wuku industrial zone Taipei county , Taiwan , R.O.C. Telephone : +886-2-2299-3279 Fax : +886-2-2298-2698 Internet : http://www.sgs.com.tw 1.2 Details of Applicant Name : Fortuna Electronic Corp. Address 3F,No 9,Sec.1,Chang An East Rd., Taipei, Taiwan, R.O.C. Contact : Mr. Vincent Chen Telephone : +886-2-25818373 ext.280 1.3 Description of EUT(s) 1 Product name GPS-HANDHELD-BLUETOOTH 2 Product ID GPSmartBT 3 Supply Voltage 4.5V 4 Carrier Frequency 2402MHz to 2480MHz 5 Modulation Method GFSK,1Mbps,0.5BT Gaussian 6 Hopping 1600hops/sec, 1MHz channel space 7 Output Interface RS232 8 Operation Temperature -20 to +70 degree 9 Compliant Bluetooth Specification Ver1.1 10 Storage Temperature -40 to +85 degree Report No. : ER/2003/10008 Page : 4 of 32 1.4 Operation Procedure Since Bluetooth is a FHSS system, it is difficult to measure the parameters under hopping mode. The output power and operating frequency are NOT End-user adjustable. Applicant offer a engineering software “BlueSuite” to control the EUT. Setting of the software parameters are set as default. Operating frequency are set as testing required. The output power is set as Ext=255, Int=55 (at max. power). Since the RS232 port on the EUT is only for outputting GPS navigation data (NMEA sentence) , the manufacturer provide another RS232 interface to control the Bluetooth module by BlueSuite. The lowest operating frequency within Bluetooth specification is 2402Mhz, and highest operating frequency is 2480Mhz. So the frequency above are used as the lowest and highest frequency in the testing, and the middle frequency is set as 2441Mhz. Due to cable loss, the real value will equal to measured value(shown on the instrument) add cable loss. Report No. : ER/2003/10008 Page : 5 of 32 2.Summary of Results subclause Parameter to be measures Verdict Page 15.207 Conducted Limits PASS 7 15.209 Radiated emission Limits, general requirement PASS 9 15.247(a)(1) Channel Spacing PASS 14 15.247(a)(1)(ii) 20db bandwidth / No. of channels PASS 15 15.247(a)(1)(ii) Average Time of Occupacy PASS 19 15.247(b)(1) Peak Output power PASS 21 15.247(c) Band-Edge Emission PASS 22 15.247(c) Spurious Emission under 25Ghz PASS 24 Report No. : ER/2003/10008 Page : 6 of 32 3. Instruments List Instrument Model Serial number Calibration date Desktop PC HP Pavilion 700 TW23420339 N/A Spectrum Analyser Agilent 7405A US40240202 May 22, 2002 Climatic chamber Terchy MHG-120L911009 Oct. 15, 2002 Antenna Schwarzbeck BBHA9120A 309/320 July 01, 2002 Antenna Schwarzbeck VULB9163 152 July 01, 2002 RF Signal generator Agilent 83752A 3601A02720 Sep. 04, 2002 EMC Analyser HP 8594EM 3624A00203 Dec. 13, 2002 EMI Test Receiver R&S ESCS 30 828985/004 Oct. 11, 2002 Transient Limiter HP 11947A 3107A02062 Jul. 24, 2002 L.I.S.N Rolf-Heine NNB-2/16Z 99012 Oct. 08, 2002 Report No. : ER/2003/10008 Page : 7 of 32 4. Measurements 4.1 Conducted Limits SUBCLAUSE 15.207 Line Neural Report No. : ER/2003/10008 Page : 8 of 32 4.1.1 Limits (EN55022) Limits dB(uV) Frequency range Mhz Quasi-peak Average 0.15 to 0.5 66 to 56 56 to 46 0.5 to 5 56 46 5 to 30 60 50 Report No. : ER/2003/10008 Page : 9 of 32 4.2 Radiated emission Limits, general requirement SUBCLAUSE 15.209 Vertical Report No. : ER/2003/10008 Page : 10 of 32 Horizontal Report No. : ER/2003/10008 Page : 11 of 32 4.2.1 Limits Report No. : ER/2003/10008 Page : 12 of 32 4.3 Channel Spacing SUBCLAUSE15.247(a)(1) Report No. : ER/2003/10008 Page : 13 of 32 4.4 No. of carrier frequency / 20db Bandwidth SUBCLAUSE15.247(a)(1)(ii) Report No. : ER/2003/10008 Page : 14 of 32 Split the whole frequency band into two. Report No. : ER/2003/10008 Page : 15 of 32 20dB bandwidth at lowest (2402Mhz), middle(2441Mhz), highest channel(2480Mhz) Channel bandwidth = 780KHZ Channel bandwidth = 780KHZ Report No. : ER/2003/10008 Page : 16 of 32 Channel bandwidth = 815KHZ Report No. : ER/2003/10008 Page : 17 of 32 4.5 Average Time of Occupancy SUBCLAUSE15.247(a)(1)(ii) Report No. : ER/2003/10008 Page : 18 of 32 4.5.1 calculation At channel 2441Mhz, there are 10 bursts in…

Text truncated - open the document above for the full version.

Setup Photos