QYDBT410D01Bluetooth USB Bongle

Bluetooth USB Dongle User Guide 1 DECLARATION All the parts of this product, including accessorysoftware and this user guide, are owned by us. Any transmitted transcribedimitated, or translated into any language in any form or by means without permission from us are illegal. The specification and information about this product in this user guide just supply for your reference. Any damages arising from any detect or error in this user guide or product, It will no responsibility from us. and will no any kinds notice for any update of content. P. S: Their Company owns the product and brand which description in this User Guide. 2 Contents 1 Product Description 1.1 Introduction ............................................. 4 1.2 Product Specification ............................................. 4 1.3 Notes to installation ............................................. 5 2 Software Installations 2.1 System Requirement ............................................. 6 2.2 Start to Installation ............................................. 6 3 Hardware Installations 4 Function Descriptions 4.1 Bluetooth Serial port ............................................. 12 4.2 Dial-Up Network ............................................. 13 4.3 Network Access ............................................. 14 4.4 File Transfer ............................................. 22 4.5 Information Exchange ............................................. 22 4.6 Information Synchronization .......................................... 22 4.7 Fax ............................................. 23 5 Bluetooth software configurations 5.1 General ............................................. 24 5.2 Accessibility ............................................. 25 5.3 Discovery ............................................. 26 5.4 Information Exchange ............................................. 28 5.5 Local Service ............................................. 29 5.6 Client Application ............................................. 29 5.7 Hardware ............................................. 30 5.8 Version Info ............................................. 31 5.9 Notification ............................................. 31 6 Others 6.1 Mac user reference ............................................. 32 3 1 Product Description 1.1 Introduction Thank you for purchasing this versatile Bluetooth wireless communication product. Bluetooth wireless technology is one kinds of short-range radio technology within the feature such as low-cost, short-range and low power etc. And developing by EricssonIntel 3comNokiaToshiba, and other well-known companies. The special feature, short-range radio link, of Bluetooth wireless technology can be replace the traditional wire connect between PC and others digital devices. Let you connect all the devices together: Desktops, Laptops, telephones, PDAs, Fax machines, Printers and Keyboards via Bluetooth wireless technology. This Bluetooth USB Dongle has built-in Bluetooth wireless technology. Just experience the convenience in Bluetooth service: wireless networking access, file transfer, wireless fax, and information synchronization etc. Welcome to Wireless World. 1.2 Product Specification Input Power 5.0V DC (USB power) Operation Voltage 1.8V for core logic, 1.8V for RF, 3.3V for I/O Frequency Range 2402 – 2480MHz, in 2.4GHz license-free ISM band Data Rate 720 kbps Power Consumption (T=25) Peak current in ACL data transfer 720Kbps = 55mA Peak current in SCO HV1 connection = 60mA Stand by current = 100μA Receiver Sensitivity -80dBm (Single slot BER = 0.1%) Radio Output Power -4 dBm (Bluetooth Spec. 1.1 class 2 device) Dimension 50x16.8x9 mm 4 1.3 Notes to Installation 1.3.1 This User Guide description as Microsoft Windows 2000 operation system. If you are Mac user. Please refer to the 6 th description. 1.3.2 Please read this User Guide carefully before installation. 1.3.3 Please complete software installation, after that you can set the USB Dongle to computer. 5 2 Software Installation 2.1 System Requirement To ensure the device operate correctly, It is necessary to check your system in the minimum requirements as described below: ♦ Windows - Processor Intel Celeron/Pentium III or above. - Operation System Windows 98SE/ME/2000/XP - System Memory 32MB a t least - Hard Drive Free Space 12MB 2.2 Start to installation Step1 Insert the Software CD into CD-ROM drive. Installation program will start automatically if the auto-run function of CD-ROM is enabled. If the installation program not process automatically, you can utilize the Windows Explorer to browser CD content and run SETUP.exe manually. Step2 With ensuring windows appears, please click “Next” button to continue the software installation. 6 Step3 In “License Agreement” window, please select “I accept the terms in the license agreement” item, and click “Next” button to continue. Step4 In “Device Information” window, please fill in the blank with a name that the computer you install the Bluetooth USB Dongle. This name will show to other Bluetooth devices in Bluetooth environment. And in “Device Type” item, please choose your computer type (Desktop /Laptop). Then click “NEXT” to continue. 7 Step5 The software default destination folder is located in: C:/Program File/ Widcomm/ Bluetooth Software. If you want to change the folder, please click “Change” to select a path you prefer. Step6 After set the path, please click “Install” button to start installation program. 8 Step7 During the processing of the Bluetooth software installation, it is possible to appear Microsoft Digital Signature issues such as: Bluetooth Null ModemBluetooth Modem Bluetooth FAX ModemBluetooth LAN Access Server Driver. Please confirm them manually by pressing “Yes” button from the pop-up windows so as to finish the entire installation. 9 Step8 Please reboot your system after the software installation is finished. Step9 There are two Bluetooth icons appear on the desktop and system tr…

Text truncated - open the document above for the full version.

MO-210 Bluetooth Module ANTENNA ESD Protection USB 5V -> 3.3V Regulator Bluetooth USB Dongle Block Diagram

From: Eva Kao [[email protected]] Sent: Wednesday, April 30, 2003 2:35 AM To: Mike Kuo; Ting (Ting); [email protected]; Vincent (Vincent); [email protected] Subject: Re: KINGENE Technology Corporation, QYDBT410D01 Hi Mike, Answer#1: Please find the revised ID Label. Answer#2: Please find the revised confidentiality letter. Answer#3, 4: Please find the revised user manual, the user manual is revised for output and add the RF Exposure. Thank you! Eva ----- Original Message ----- From: "Mike Kuo" <[email protected]> To: "Ting (Ting)" <[email protected]>; <[email protected]>; <[email protected]>; "Vincent (Vincent)" <[email protected]>; <[email protected]> Sent: Wednesday, April 30, 2003 3:14 PM Subject: FW: KINGENE Technology Corporation, QYDBT410D01 > > > Mike Kuo > Compliance Certification Services > 561F Monterey Road > Morgan Hill, CA 95037 > Tel: (408)463-0885 x:105 > Fax:(408)463-0888 > e-mail:[email protected] > > > -----Original Message----- > From: CERTADM > Sent: Wednesday, April 30, 2003 12:14 AM > To: '[email protected]' > Subject: KINGENE Technology Corporation, QYDBT410D01 > > > Notice_content > ------------- > Question #1: The photo shown in the FCC ID label format is headset device. > This device does not agree with the device in internal and external photos. > Please explain. > > Question #2: Operational description is listed as confidential document. > This Operational description only contain product specification which can > not be considered as confidential document. Please remove this item from > the request list. > > Question #3: The rated output power listed in the operational description as > well as in the user manual is 4dBm ( class 2 ). However, the max. output > power measured is -4.39dBm. Please explain the differences between rated > power and measured power. > > Question #4: User Manual does not contain RF exposure information. Please > provide revised user manual to comply this requirement. > > Best Regards > > Mike Kuo > >

C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 APPENDIX 2 EXTERNAL PHOTOGRPHS OF EUT C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 All of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: KINGENE Technology Corporation FCC ID: QYDBT410D01 FCC ID: QYDBT410D01 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 APPENDIX 3 INTERNAL PHOTOGRPHS OF EUT C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 Open View of PDA C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 Front View of PDA Back View of PDA

Bluetooth USB Dongle BT410D Interoperability Devices that pass the Bluetooth TM qualification may communication to each other. KINGENE Bluetooth TM USB Dongle can work with mobile phones, PDAs, headsets, printers, and many other Bluetooth TM -enabled devices. Reliability Bluetooth TM implements FHSS (Frequency Hopping Spread Spectrum) technology, which provides a highly reliable radio link in 10-meter range. Embedded ceramic chip antenna provides high-quality radio signal and less influence from environmental deviation. Security 56-bit encryption and Link Manager Authentication means Bluetooth TM devices are identified by the unique 48-bit BDA (Bluetooth TM Device Address) and PIN, and pairing must be accomplished before any connection made. So user can exchange information securely. Simplicity KINGENE Bluetooth TM USB Dongle is USB 1.1 Plug and Play compatible. Just plug the Dongle into USB port of your notebook or desktop PC, Windows will find the necessary driver and install it. The process is point-and-click simple. General Description - Bluetooth TM V.1.1 compliant - Bluetooth TM class 2 device, communication range up to 10 meters - Support point -to -point and point -to -multipoint operation - Built-in 4Mb flash memory for firmware upgrade - LINK Indicator LED - Bundled WIDCOMM s Windows Bluetooth TM 1.1 protocol stack and profiles: - Support for Windows 98SE, ME, 2000,XP and MAC OS - Ease -to -use interface, including shell extensions and system tray Generic access profile Service discovery app profile Synchronization profile Object push profile Dial-up network profile Serial port profile Headset profile Generic object exchange profile File transfer profile LAN access profile Feature KINGENE Technology Corporation TM Internet Access via Bluetooth TM mobile phone Faxing via Bluetooth TM mobile phone Data Synchronization between PC and PDA Files Printing via Bluetooth TM printer LAN Access share to another device File Transfer & Data Exchange between 2 PC Application Diagram Specification Power Supply RF Characteristics Antenna Power SupplyPower Supply 5.0VDC USB bus-powered Operation Voltage Max Radio Output Power Receiver Sensitivity 1.8V for core logic and RF, 3.3V for flash memory 4dBm (Bluetooth TM Spec. 1.1 class 2 device) Impedance50 ohm Gain0-2 dBi VSWR2 max PolarizationLinear Azimuth BeamwidthOmni-directional TypeHigh-performance solid-state LTCC chip DRA(Dielectric Resonance Antenna) -80dBm (Single slot BER 0.1%) Frequency Range2402 -2480MHz, in 2.4GHz license-free ISM band Carrier Frequency Drift25KHz (Single slot packet) Power Consumption (T=25 C) Peak current in ACL data transfer 720Kbps = 55mA Peak current in SCO HV1 connection = 60mA Stand by current = 100£gA KINGENE Technology Corporation 7F, No. 144, Sec. 3, Minchuan E. Rd. Taipei 105 TAIWAN Tel :+886-2-2717-0551 Fax :+886-2-2717-1263 e-mail: [email protected] < - < -

C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 Page 1 of 53 Rev. 00 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Bluetooth USB Dongle MODEL No.: BT-410D BRAND NAME: KINGENE FCC ID: QYDBT410D01 REPORT NO: 030008-RF-ID ISSUE DATE: Apr. 08, 2003 Prepared for KINGENE Technology Corporation 7F, No. 144, Minchuan E. Rd. Sec. 3, Taipei, Taiwan, R.O.C. Prepared by C&C LABORATORY, CO., LTD. #B1, 1 st Fl., Universal Center, No. 183, Sec. 1, Tatung Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C. TEL: (02)8642-2071~3 FAX: (02) 8642-2256 C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 Page 2 Rev. 00 VERIFICATION OF COMPLIANCE Applicant: KINGENE Technology Corporation 7F, No. 144, Minchuan E. Rd. Sec. 3, Taipei, Taiwan, R.O.C. Equipment Under Test: Bluetooth USB Dongle BRAND NAME: KINGENE MODEL No.: BT-410D Model Difference: N/A Serial Number: N/A File Number: 030008-RF-ID Date of test: Jan 16 ~ Jan. 28, 2003 We hereby certify that: The above equipment was tested by C&C Laboratory Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2001) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15. The test results of this report relate only to the tested sample identified in this report. Approved By ________________________________ Vincent Su / RF Dept. Vice Manager C&C Laboratory Co., Ltd C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 Page 3 Rev. 00 Table of Contents 1. GENERAL INFORMATION .........................................................................................................5 1.1 Product Description ............................................................................................................................5 1.2 Related Submittal(s) / Grant (s) ..........................................................................................................5 1.3 Test Methodology ...............................................................................................................................5 1.4 Test Facility.........................................................................................................................................5 1.5 Special Accessories .............................................................................................................................5 1.6 Equipment Modifications....................................................................................................................5 2. SYSTEM TEST CONFIGURATION ............................................................................................6 2.1 EUT Configuration .............................................................................................................................6 2.2 EUT Exercise ......................................................................................................................................6 2.3 Test Procedure.....................................................................................................................................6 2.4 Configuration of Tested System..........................................................................................................7 3. SUMMARY OF TEST RESULTS .................................................................................................9 4. DESCRIPTION OF TEST MODES ..............................................................................................9 5. CONDUCTED EMISSION TEST................................................................................................10 5.1 Standard Applicable ..........................................................................................................................10 5.2 EUT Setup.........................................................................................................................................10 5.3 Measurement Procedure....................................................................................................................10 5.4 Measurement Equipment Used: ........................................................................................................11 5.5 Measurement Result..........................................................................................................................11 6. PEAK OUTPUT POWER MEASUREMENT............................................................................14 6.1 Standard Applicable ..........................................................................................................................14 6.2 Measurement Procedure....................................................................................................................14 6.3 Measurement Result..........................................................................................................................14 6.4 Measurement Equipment Used: ........................................................................................................14 7. 20dB BAND WIDTH .....................................................................................................................17 7.1 Standard Applicable ..........................................................................................................................17 7.2 Measurement Procedure....................................................................................................................17 7.3 Measurement Result..........................................................................................................................17 7.4 Measurement Equipment Used: ................................................................…

Text truncated - open the document above for the full version.

C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 APPENDIX 1 PHOTOGRPHS OF SET UP C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 Radiated Emission Set up Photos C&C Laboratory Co. Ltd. REPORT NO: 030008-RF-ID FCC ID: QYDBT410D01 DATE: 04/08/2003 Conducted Emission Set Up Photos